How to increase disk read and write speed after installing new SSD (2009 Macbook Pro)? Why not as fast as advertised?

Hi everyone,
I just installed a Crucial MX10512 GB SSD into my 2009 Macbook Pro. It's definitely much faster, but the read and write disk speed is around 200 Mb/s for both versus the 300-500 Mb/s that the SSD advertised. Any ideas as to why? And is there anything I can do to make it faster? Before I installed it, it was between 80-90 Mb/s.
Specs:
- currently have about 460 of 511 GB of storage available
- am using 2GB of memory
- running on 10.10.2 Yosemite
Thanks!

nataliemint wrote:
Drew, forgive me for being so computer-incompetent but how would I boot from another OS? And shouldn't I be checking the read speeds on my current OS (Yosemite) anyways because I want to know how the SSD is performing on the OS I use? And finally, what kind of resources would it be using that would be slowing down my SSD?
Sorry for all the questions - I'm not a Macbook wiz by any means!
You could make a clone of your internal OS onto an external disk. Hopefully you already have a backup of some form
A clone is a full copy, so you can boot from it. It makes a good backup as well as being useful to test things like this.
Carbon Copy Cloner will make one or you can use Disk Utility to 'restore' your OS from the internal disk to an external one.
Ideally the external disk is a fast disk with a fast 'interface' like Thunderbolt, Firewire 800 or USB3. USB2 can work, but it is slow & may effect the test.
You connect the clone, hold alt at startup & select the external disk in the 'boot manager'. When the Mac is finished booting run the speed tester.
Maybe this one…
https://itunes.apple.com/gb/app/blackmagic-disk-speed-test/id425264550
Test the internal & compare to the previous tests
A running OS will do the following on it's boot disk…
Write/ read cache files from running apps
Write/ read memory to disk if memory is running low
Index new files if content is changing or being updated
Copy files for backing up (Time Machine or any other scheduled tasks)
Networking can also trigger read/ write on the disk too.
You may not have much activity that effects a disk speed test, but you can't really be sure unless that disk is not being used for other tasks.
Disk testing is an art & science in itself, see this if you want to get an idea …
http://macperformanceguide.com/topics/topic-Storage.html
Simply knowing that it's about twice the speed would be enough to cheer me up

Similar Messages

Read and write speeds of PCI-E SSD 256GB

What are the read and write speeds exceeded with a 2014 Mac Mini with the 256GB PCI-E SSD from Apple? Thanks.
PS: I was thinking about getting the 2014 Mac Mini with these specs at $899.99:
2.6GHz Dual-Core Intel Core i5 (Turbo Boost up to 3.1GHz)
8GB 1600MHz LPDDR3 SDRAM
256GB PCIe-based Flash Storage
Intel Iris Graphics
User's Guide (English)
Accessory Kit

8 to 9 hundre MB/s for the PCIe SSDs vs 500 MB/s for a starndard SSD

Reads and Write Speed

Hello guys
I have a question. I bought the Refurnished Mac Book Pro Retina 13.3 inch(Mid 2014) basic model(8GB memory, 2.6GHz CPU, 128GB SSD)
And Since I did buy from the refurnished, I am pretty suspicious about the performace. So I used the benchmark test and Read and Write speed test(Black magic speed test). Benchmark test was about average to most of the same Macbook pro users, but the read and write speed was pretty slower than any other. It was about 220 MB/S for Write and 560MB/S for Read. It that means something wrong with my Macbook?
Thank you very much for your reading all of this

Hi Ralphael,
I was thinking of buying the WD MyCloud box and your words of wisedom inspired me to take a risk, getting one of these for myself. It's always a gamble buying new technology bits and hoping it will do, what you expect it to do.
First thing I did was connect the WD MyCloud to my network (entrirely 1 Gb network capable ports - including router).I updated the firmware to the latest via the network connection, which was reasonably quick to update.
Everything worked perfectly, straight from go, the 3 Tb of data I had on my former Seagate GoFlex (manually connected to a SATA port on my P.C) only took a few hours to completely copy across. I tried transferring the wholelot across via the Seagate GoFlex 100mB/s ethernet port, but that was horrendously slow.
I loved the way I could get access to this device, via the internet, (wd2go.com) to the files stored on my WD MyCloud (at home). It indeed acted as a "Cloud" device for me as I could map the connection to a network drive on my P.C and then
copy files across to my P.C (wherever I am) - Just drag and drop from explorer and it's pretty quick to transfer across as well.
I just wanted to say this box is fanatastic and I am very happy with it. I know there have been a few critics out therewho haven't had good things to say, but I think they need to make sure everything fits the criteria for successful results,
which this device is well capable of producing. I had the experience of using a Seagate GoFlex device and that took a while before I got things working reasonably
well for me. It's good to have a device that now well exceeds the capability of this former device.
Very happy with this WD MyCloud and my experiences with it.
Added Kudos for your article.
Cheers
Patrick

How do I make Read and Write 10 Gold work with Firefox? I have the latest Firefox 10.0.1 but it keeps saying "Please upgrade your version of Mozilla Firefox. The minimum version supported by Read&Write is version 3.0."

I just loaded Moxilla Firefox on my Windows 7 PC today and tried to use my Read and Write 10 Gold text help software but it just does not seem to work with this browser (works fine on Internet Explorer) as it keeps saying "Please upgrade your version of Mozilla Firefox.
The minimum version supported by Read&Write is version 3.0." but this versions is higher than 3.0!

We have a solution available for anyone needing to run Firefox 10 with Read&Write v10 Gold, please email us directly for this temporary resolution- [email protected]

After installing Maverick on my macbook pro, imessage on my ipad and Iphone stopped working properly. Is there a fix/test.

After installing Maverick on my macbook pro, imessage on my ipad and Iphone stopped working properly.
What I get is a RED exclamation and "Not Delivered". It happens even if i resend it over and over.
I have made sure that the 3 devices all have the same settins in iMessage.
I have made sure to try doing it from the same network and from the cell provider network.
I have tried rebooting all three devices.
The only way to get it to work on my iphone and iPad is to dissable it in Mavericks on my MacBook Pro.
Is this a "feature" of the new OS?

Hi,
On the iOS devices remove the Apple ID.
Set the device in to Airplane Mode (this breaks with the server)
Start with the iPhone to add back the Apple ID - only after you see the iPhone Number is Verified.
The Restart the Mac Version
Accept the pops ups that state what the iPhone is using.
Do same on iPad.
8:31 pm Wednesday; April 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How many ways to read and write a local variable in a called VI?

Ciao!
I'm producing my first TestStand sequence. It is called "FirstAttempt" and it is made by a single step which calls a VI. One of the first dilemmas i encountered realizing this sequence is how to read and write a local variable (created going in Variables -> Locals ('FirstAttempt') -> <right click to insert local>) in the called VI.
The first way (the only one i tried) is to create a control and an indicator on the VI front panel, connect them to their respective terminals in the connector pane and then specify (going in Step Settings -> Module) that these connectors (shown in the Parameter Name column) are linked to the local variable (selected in the Value column).
The second way (not tried) consists in using TestStand API: create a Sequence Context reference on the VI front panel, link it to a property node in the block diagram, select the property "Locals" and extract from this the local variable name and value which, i think, can be readable and writable.
So...
Are the shown ways correct?
Are there other ways?
Knowing that a "local" variable can be considered "global" within the whole sequence, is there the possibility to simply create a reference to the local variable and use the reference in the called VI block diagram in order to save space in the connector pane (if using method 1) or in the block diagram (if using method 2)?
Thanks!
Message Edited by aRCo on 09-17-2009 05:09 AM

Hi,
Before TestStand 3 you would use the second way you quoted as its the only way.
But now you would use the first way you quoted. You may still what to pass the SequenceContext if you were going to use the TestStand API. For TestStand 3.x and above you would use this way as the first chose. (Personnelly, I would not pass the SequenceContext into a VI if I know it was never going to be used in that VI.)
Not sure I understand your final comment, maybe you are liking it to passing the reference of a control to a subVI so that the control can be updated from within the subVI.
If this is the case and you had a situation where you had a step that was running in parallel with the rest of the steps in the sequence either as a separate thread or execution and were dependent on the contents of the local variable changing from that parallel running step, then you would have to use the API SetVal method to change the local.
Hope this is clear.
Regards
Ray Farmer
Regards
Ray Farmer

How well does mac read and write with FAT32

Hi there,
I have heard that an external hard drive formatted in FAT32 from a windows machine will work with a mac. Is it a seemless read and write while using an application. i have both a pc and a mac and want both to use the same harddrive.
Thanks,
WayneAdams

Hi,
as brianking said, you won't be able to boot from it, but for an external drive fat32 works like a charm. I share three 250 GB external drives with my colleagues at work and we only once had a problem of destroyed FAT which might have been caused by the Mac, but was never examined since it did not happen again.
volker

Adobe Flash, latest version, is hitting the disk hundreds of times per second with disk reads and writes for no obvious reason. Is this normal? If not, ...

I am running Firefox 18 on Windows 7, all with latest updates. The Adobe Flash plugin (latest version) hits the disk with hundreds of reads and hundreds of writes each second. This seems to start as soon as cnn.com is loaded then as other sites are loaded it just gets worse. Any thoughts on what might be causing this? Is it normal? If not normal, how can I can stop it?

I do not really have any solid suggestions for this but
* 11.6.602.168 is now the latest version. You were using Flash 11.5 r502 <br />Have you now updated ?
* Hardware acceleration issues are sometimes resolved by upgrading Graphics drivers <br /> [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Flash often causes issues with Firefox. From Flash 11.3 some Windows users were needing to disable Flash's ''protected mode''. Rather a longshot but it may be worth experimenting with the protected mode and trying turning it off.
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
Potential workarounds would be
#look at the pageinfo media. Use Ctrl + I -> |Media| to see what is on the pages
# If you do not want that content to play automaticaly consider add-ons like http://noscript.net/ &/or [https://addons.mozilla.org/en-US/firefox/addon/flashblock/ Flashblock] or one of the related addons.

Command to find the top unix processes doing high disk read and writes

I would like to know 'the unix command to find the top unix processes doing high disk reads or/and writes
If any one knows the solution please help me?
-Swamy

From the oracle side you can obtain OS process id for sessions having some waits for user I/O
select p.spid, s.sid, s.sql_id
from v$session s, v$process p
where s.paddr=p.addr
and s.sid in
select sid from v$session_wait
where wait_class='User I/O'
);and to see sessions that are currently waiting on user I/O use
select p.spid, s.sid, s.sql_id
from v$session s, v$process p
where s.paddr=p.addr
and s.sid in
select sid from v$session_wait
where wait_class='User I/O'
and wait_time=0
);HTH, Peter

How can I transfer iLife and Final cut from my iMac to my Macbook Pro?

I have Final Cut and iLife on my iMac and just bought a Macbook Pro and I want to transfer it to my Macbook now. Do I need the disc? Can I do it without the disc and if so how?

Welcome to the Apple Support Communities
Respecting to iLife, your MacBook should come with iPhoto, iMovie and GarageBand preinstalled, so you don't have to transfer iLife from your iMac unless you need iWeb or iDVD.
Respecting to Final Cut, it depends on the version you have. If you have Final Cut Pro X, you have purchased it from the App Store, so you can download it in your MacBook Pro for free. To do it, open App Store > Purchases, and download Final Cut Pro X. If you have an older Final Cut version, I recommend you to install it into your computer using the DVDs where Final Cut Pro came.
If you have to transfer more data, you should consider the option of using Migration Assistant. Read > http://support.apple.com/kb/ht4889

How can I improve my Mac's speed after installing Leopard on a G5 PowerMac?

Hello everyone,
I have a 1.8 G hz PowerMac G5 (late 2004) - single processor. I recently installed Leopard 10.5.4 and now it's performance is VERY slow, including the Internet. Launching any application takes 4 times longer at least, and the speed at which tasks are performed and/or saved are extremely slow too. I want to know if this can be corrected. If there is anything I can do to improve performance, short of buying more RAM? But if the answer is RAM, wil THAT improve the internet speed? It was pretty fast before.

More RAM & bigger faster Hard Drive will help, maybe a better Graphics card also, since 10.5 ises the Video much harder.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:          GeForce 7800GT
Type:          Display
Bus:          PCI
Slot:          SLOT-1
VRAM (Total):          256 MB
Vendor:          nVIDIA (0x10de)
Device ID:          0x0092
Revision ID:          0x00a1
ROM Revision:          2152.2
Displays:
VGA Display:
Resolution:          1920 x 1080 @ 60 Hz
Depth:          32-bit Color
Core Image:          Supported
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Display:
Status:          No display connected

After installing Mavericks OS, My MacBook Pro is Slow and weak?

Recently I upgraded to Mavericks OS system from Mountain Lion. I use MacBook Pro 17" of 2011 with 2.2 GHz Intel Core i7.
Mavericks supposed to be faster and saves more battery life. But it was not in my case. I do most of my work with Ms. Office 2011.
1) I find the Finder is extremely slow to respond. It takes more than One minute to open the folder files.
2) I find the Ms.Office is very slow. Powerpoint slides are NOT showing the content on the column view. The system battery goes down very quickly with Powerpoint.
3) The battery does NOT last more than 5 hours, comparatively it was usually be NINE HOURS.
I have reinstalled the Mavericks as advised by the Apple Expert from Apple Inc.
Still the Problem exist. What do I do?

Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Slow Boot Times after installing new SSD and Lion

Can anyone please help interpret why I'm having slow boot times? I have copied my console printout during the boot and it seems to be doing a repetitive action while booting.
Thanks
13-01-04 2:50:24.000 AM bootlog: BOOT_TIME 1357293024 0
13-01-04 2:50:25.000 AM kernel: Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
13-01-04 2:50:25.000 AM kernel: vm_page_bootstrap: 942160 free pages and 32688 wired pages
13-01-04 2:50:25.000 AM kernel: kext submap [0xffffff7f80736000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000736000]
13-01-04 2:50:25.000 AM kernel: zone leak detection enabled
13-01-04 2:50:25.000 AM kernel: standard timeslicing quantum is 10000 us
13-01-04 2:50:25.000 AM kernel: mig_table_max_displ = 73
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for TMSafetyNet
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Sandbox
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Quarantine
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Quarantine policy (Quarantine)
13-01-04 2:50:25.000 AM kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
13-01-04 2:50:25.000 AM kernel: The Regents of the University of California. All rights reserved.
13-01-04 2:50:25.000 AM kernel: MAC Framework successfully initialized
13-01-04 2:50:25.000 AM kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
13-01-04 2:50:25.000 AM kernel: IOAPIC: Version 0x11 Vectors 64:87
13-01-04 2:50:25.000 AM kernel: ACPI: System State [S0 S3 S4 S5]
13-01-04 2:50:25.000 AM kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
13-01-04 2:50:25.000 AM kernel: [ PCI configuration begin ]
13-01-04 2:50:25.000 AM kernel: console relocated to 0xf10010000
13-01-04 2:50:25.000 AM kernel: PCI configuration changed (bridge=1 device=1 cardbus=0)
13-01-04 2:50:25.000 AM kernel: [ PCI configuration end, bridges 5 devices 24 ]
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagement: (built 16:32:09 Aug 23 2012) initialization complete
13-01-04 2:50:25.000 AM kernel: mbinit: done [64 MB total pool size, (42/21) split]
13-01-04 2:50:25.000 AM kernel: Pthread support ABORTS when sync kernel primitives misused
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagementClient: ready
13-01-04 2:50:25.000 AM kernel: BTCOEXIST off
13-01-04 2:50:25.000 AM kernel: wl0: Broadcom BCM432b 802.11 Wireless Controller
13-01-04 2:50:25.000 AM kernel: 5.106.198.19
13-01-04 2:50:25.000 AM kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID e80688fffec0e9d0; max speed s800.
13-01-04 2:50:25.000 AM kernel: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
13-01-04 2:50:25.000 AM kernel: com_seagate_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: com_maxtor_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: rooting via boot-uuid from /chosen: 1052015E-B101-3046-8932-5C6B1E6A7995
13-01-04 2:50:25.000 AM kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13-01-04 2:50:25.000 AM kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/M4-CT256M4SSD2 Media/IOGUIDPartitionScheme/Imipenem (SSD)@2
13-01-04 2:50:25.000 AM kernel: BSD root: disk0s2, major 14, minor 2
13-01-04 2:50:25.000 AM kernel: Kernel is LP64
13-01-04 2:50:25.000 AM kernel: [IOBluetoothHCIController::setConfigState] calling registerService
13-01-04 2:50:25.133 AM com.apple.launchd: *** launchd[1] has started up. ***
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.powerd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.987 AM UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
13-01-04 2:50:25.990 AM UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:26.000 AM kernel: BCM5701Enet: Ethernet address c4:2c:03:01:22:c1
13-01-04 2:50:26.000 AM kernel: AirPort_Brcm4331: Ethernet address f8:1e:df:eb:b4:37
13-01-04 2:50:26.000 AM kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13-01-04 2:50:26.000 AM kernel: IO80211Interface::efiNVRAMPublished():
13-01-04 2:50:27.025 AM airportd: _processDLILEvent: en1 attached (down)
13-01-04 2:50:27.274 AM com.apple.SecurityServer: Session 100000 created
13-01-04 2:50:27.000 AM kernel: in func createVirtualInterface ifRole = 1
13-01-04 2:50:27.000 AM kernel: Created virtif 0xffffff800bdffa00 p2p0
13-01-04 2:50:27.349 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:27.607 AM com.apple.SecurityServer: Entering service
13-01-04 2:50:27.749 AM UserEventAgent: ServermgrdRegistration cannot load config data
13-01-04 2:50:27.779 AM UserEventAgent: get_backup_share_points no AFP
13-01-04 2:50:28.000 AM kernel: NVDANV50HAL loaded and registered.
13-01-04 2:50:28.000 AM kernel: Previous Shutdown Cause: 5
13-01-04 2:50:28.000 AM kernel: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
13-01-04 2:50:28.000 AM kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
13-01-04 2:50:28.332 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.333 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.347 AM com.apple.pfctl: No ALTQ support in kernel
13-01-04 2:50:28.347 AM com.apple.pfctl: ALTQ related functions disabled
13-01-04 2:50:28.363 AM com.apple.launchd: (com.sec.faxdb[73]) posix_spawn("/Library/Printers/Samsung/Fax/FaxDB/faxdbd", ...): No such file or directory
13-01-04 2:50:28.385 AM com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb[73]) Exited with code: 1
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 300 seconds
13-01-04 2:50:28.606 AM mDNSResponder: mDNSResponder mDNSResponder-320.16 (Jul 19 2012 21:07:07) starting OSXVers 11
13-01-04 2:50:28.704 AM com.apple.revisiond: 2013-01-04 02:50 revisiond[52] (CarbonCore.framework) implementation_callback_rpc: ERROR: CFDictionaryGetValue(FSEvents_streamDict, cfPortNumber) => NULL
13-01-04 2:50:28.705 AM com.apple.usbmuxd: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
13-01-04 2:50:28.814 AM configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
13-01-04 2:50:28.814 AM configd: DHCP en1: INIT-REBOOT transmit failed
13-01-04 2:50:28.837 AM systemkeychain: done file: /var/run/systemkeychaincheck.done
13-01-04 2:50:28.880 AM mds: (Normal) FMW: FMW 0 0
13-01-04 2:50:28.938 AM mDNSResponder: D2D_IPC: Loaded
13-01-04 2:50:28.938 AM mDNSResponder: D2DInitialize succeeded
13-01-04 2:50:28.990 AM configd: setting hostname to "Karr-Hong-Lees-MacBook-Pro.local"
13-01-04 2:50:29.000 AM kernel: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
13-01-04 2:50:29.000 AM kernel: DSMOS has arrived
13-01-04 2:50:29.000 AM kernel: macx_swapon SUCCESS
13-01-04 2:50:29.031 AM configd: network configuration changed.
13-01-04 2:50:29.984 AM loginwindow: Login Window Application Started
13-01-04 2:50:30.091 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 299 seconds
13-01-04 2:50:30.142 AM netbiosd: Unable to start NetBIOS name service:
13-01-04 2:50:31.000 AM loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
13-01-04 2:50:31.000 AM kernel: en1: 802.11d country code set to 'US'.
13-01-04 2:50:31.000 AM kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
13-01-04 2:50:31.282 AM loginwindow:
O3REQUIRE FAILED: ret == 0
   - file: /SourceCache/BezelServices/BezelServices-232.3/Utilities/Utilities.c
   - line: 91
13-01-04 2:50:31.282 AM loginwindow: Failed to lookup Bezel UI Server port: Bootstrap Unknown Service.
13-01-04 2:50:31.315 AM com.apple.SecurityServer: Session 100004 created
13-01-04 2:50:31.317 AM loginwindow: Login Window Started Security Agent
13-01-04 2:50:31.347 AM com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:32.000 AM kernel: MacAuthEvent en1   Auth result for: a8:39:44:57:2c:50 MAC AUTH succeeded
13-01-04 2:50:32.000 AM kernel: wlEvent: en1 en1 Link UP virtIf = 0
13-01-04 2:50:32.000 AM kernel: AirPort: Link Up on en1
13-01-04 2:50:32.000 AM kernel: en1: BSSID changed to a8:39:44:57:2c:50
13-01-04 2:50:32.530 AM airportd: _doAutoJoin: Already associated to “TELUS3939”. Bailing on auto-join.
13-01-04 2:50:33.000 AM kernel: AirPort: RSN handshake complete on en1
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:35.093 AM configd: network configuration changed.
13-01-04 2:50:35.113 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on TELUS3939 because it is protected and not on the exception list
13-01-04 2:50:35.116 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
13-01-04 2:50:35.118 AM configd: network configuration changed.
13-01-04 2:50:35.991 AM ntpd: proto: precision = 1.000 usec
13-01-04 2:50:37.270 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:43.282 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)

Fixed it!
Just changed my settings to auto log on.
Hooray!

How do i boot into my osx after installing windows on my macbook pro?

i installed windows 7 on my macbook pro last night and now i cannot get into my osx partition!!! please help me!!!

Press Option at restart, or select the Mac OS X system from the Startup Disk control panel in Windows or the Startup Disk pane of System Preferences in Mac OS X.
(124943)

Installing New Hardrive into Macbook Pro 13" and can't boot

I have installed a new 500Gb 5400rpm drive into my macbook pro 13. Before I swapped the drives I used time machine to back-up onto my Lacie drive. Now the new drive is in. I turned on the computer, pressed the option button and nothing came up. I have now put my old HD into an enclosure and booted up from that drive. I copied my whole hd over to the new drive once it was formatted and tried to boot but this didn't work. I thought once I had the time machine back-up on a drive I would be able to press option when I turn on the computer and then that would workj. I don't have my OSX 10.6.8disk so am now just booting up off my old hd which is pointless. Can anyone help as I am losing my mind.

What happens when you install the original HDD in the MBP? If it does not boot , the connecting cable may be faulty.
Ciao.

How to increase disk read and write speed after installing new SSD (2009 Macbook Pro)? Why not as fast as advertised?

Similar Messages

Maybe you are looking for