How to increase footnote space?

Hi!
I am working on a piece of text in Indesign CS6. The text contains the work at the top and a commentary to the work in the footnote area. The commentary is quite lengthy, thus there are many footnotes for just one paragraph. The opening paragraph to the work has approx. 12 footnotes on its own.
Unfortunately, Indesign has made half of the work that was originally on the page go onto the next page as there are too many footnotes at the bottom. This has left a whole load of space, and I have noticed this on all pages. That Indesign automatically shifts text onto the next page when a certain amount of the footnotes are inserted. Does anyone know how I can get rid of this limitation and put in unlimited amounts of footnotes on every page of the document? Increase the amount of space for footnotes?
Thanks in advance for all the help !

The short answers is you can't increase ID's space for footnotes.  Unlike certain word-processors, InDesign will begin a footnote only on the page where the note's reference falls in the main text.  Thus if you have 3 footnotes in one line, for example, there's a good chance ID will push that line to the next page and leave a gap on the preceding page.
If your commentary is very lengthy then ID's footnotes simply may not work well: you may need to put the commentary in a separate story running through a separate set of frames on each page -- a task all too familiar to PageMaker veterans.   Once you get going the work isn't as tedious as you might think, plus you get more flexibility: with a page big enough for two columns, you can put notes in the outer column, and encroach on the bottom of the main-text column as necessary.
Check out Peter Kahrel's workarounds and scripts for handling notes.
David

Similar Messages

  • How to increase the space of a page in Application Designer ?

    Folks,
    Hello. I am developing a page in Application Designer.
    I need to place multiple records with many fields in the page. But the entire space of the page is not enough to place the fields. We need to use a vertical scroll to increase the space of the page to hold all of the fields. But I don't understand how to do this feature.
    Can any folks tell me how to increase the space of a page in Application Designer in order to hold many fields ?

    Folks,
    Hello. Thanks a lot for replying. It's correct !

  • How to increase table space?

    how can you increase table space ?( using BR* tools) but whats the procedure/way ?

    Hi,
    execute command brspace –f tsextend and supply tablespace name
    u will have 2 options one to increase size and other add datafile
    Connect to dataabse
    issue
    sql> alter tablespace <name> add datafile <'path'> size <2000m>;
    to resize
    sql>alter dataabse datafile <'path'> resize 2000m;
    or ref
    http://help.sap.com/saphelp_erp2005/helpdata/en/38/9f3fed3c32a74da3367d5f18dafb14/frameset.htm
    regards
    Vinod

  • How to increase "available space"

    Hello.  I'm on my first Mac and have Snow Leopard 10.6.8 and want to upgrade to Mtn. Lion.  It says that it requires 2GB of memory, which I have, and 8GB of "available space."  I have 6GB.  Does Apple have a snappy way to increase "available space" that does not require opening the computer up?  Thank you.

    iStuckagain wrote:
    Thank you all for your help.  Your answers made me cringe, and since I was cringing so much that I decided to go back and look at the numbers and I have to apologize: I gave the wrong number for disk space.  (Feeling like a dork right about now.)
    My computer comes with two 2GB (banks) of DDR3 memory, so the memory is 4GB.  I got some help learning about and locating the Applications>Utilities>Activity Monitor>System Memory section and found that I have 1.82 GB free, 641MB wired, 1.42GB active, 139.7MB inactive, and 2.18 GB used.  Adding free and used gives 4GB total memory, and so I think I do have just under 2GB free.  I will check out both places you listed, Eric Root, and I will get, as you suggested, Csound1, as much RAM as my computer permits.
    And regarding "disk space," I don't have 6GB, I have 640GB!  I looked a few tabs over and found that my disk usage is 333.92GB utilized and 305.87GB free, so it looks like I have 640GB (650, but 640 useable?) of disk space in total and that just over half is being used. 
    I'm sorry for the poor researching in my original post, but I'm pretty new to the inner workings of computers.  That's just where I am right now.  It appears that the memory I thought I had enough of, I need more of, and the disk space I thought I was out of, I have plenty of!  Jeez.  Anyway, I appreciate the help from all of you and I will take care of that RAM problem pronto   .
    You're welcome

  • How to Increase Line space between two lines in ALV Grid

    hi,
    I want to increase the line space between any two lines in ALV GRID. Can anybody has solution for this issue.
    Regards,
    Madan

    Hi Madan
    It's not possible
    Regards
    Gregory

  • How to increase work space area in report? Lanscape mode?

    I see...some of report got wider area....it creates report printable in landscape mode..
    how can i increase workspace?...i want wider workspace...i don't know, how to do that.
    Please help.

    Hi
    To change the page to a larger size in CR, change the printer setup of the report file by selecting a different paper size. (Click File > Printer Setup)
    For example, you can change the paper size from 'letter' to 'legal' to increase the paper height from 11 inches to 14 inches.
    The options available in the Print Setup dialog box are dependent on the paper sizes that your printer driver supports. Different printers have varying page size options.
    Hope this information is useful to you.
    Regards
    Asha.

  • HOW TO INCREASE HD SPace - Logic FCP=almost full

    MBP 2.2 120GB HD, anyone know of a larger HD they can recommend at a decent price?
    Prefer 7200, but really want largest...also noticed there are some FW LAcie that apple sells also with eSata, but moving files means taking HD.
    I know the loops alone are 26+GB. So what would be the best to do?
    Thanks

    http://barefeats.com/rosa06.html
    Seagate Momentus 5400.4 250GB http://storagereview.com/pairnew_seagateofferings
    Im waiting a few more months for 7200RPM 250gig drives to arrive.

  • How to Increase TableSpace

    Hi All,
    This is angeline, I have question how to Increase Table Space using NW2004s/Oracle 10g/OS 2003 server
    I check DB02 in SAP, I think I have to increase SAPSR3 Tablespace... can you please tell me how to do that step by step using BR-SPACE
    Tablespace name     Size(MB)     Free(MB)     Used(%)     Autoextend     Total size(MB)
    PSAPSR3          24600.00     692.25     97     YES     40000.00
    PSAPSR3700     24000.00     7058.06     71     YES     30000.00
    PSAPSR3DB          10000.00     6226.13     38     YES     30000.00
    PSAPSR3USR     20.00     19.31     3     YES     10000.00
    PSAPTEMP          980.00     978.00     0     YES     10000.00
    PSAPUNDO          8900.00     5.00     100     YES     10000.00
    SYSAUX          200.00     25.38     87     YES     10000.00
    SYSTEM          780.00     335.44     57     YES     20000.00
    Your answer will be really appriciated
    Angeline

    sorry to burst your bubble,  but this is a very basic question that can be answered  by basic training (ADM100) or even better yet, Google searching.
    I'll be a good sport and give you the program name to look for:  BRSPACE
    Good luck.

  • Can't figure out how to maximize the space on the page by increasing the column width

    Trouble with pages app:
    can't figure out how to maximize the space on the page by increasing the column width
    I have 3 columns and they have spaces btw them that I cannot close the gap on.

    Whatever the version, you can click on the gutter figure and edit it.
    Click once on the column and a second time on the Gutter measurement.
    Peter

  • How to I eliminate space in my start up file so I can increase more space to add onenote?

    how to I eliminate space in my start up file so I can increase more space to add one-note?

    Go step by step and test.
    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Backup your computer.
    3. Empty Trash.
       http://support.apple.com/kb/PH13806
    4. Disk space / Time Machine ?/ Local Snapshots
      Local backups
       http://support.apple.com/kb/ht4878
    5. Delete old iOS Devices Backup.
        iTunes > Preferences > Devices
        Highlight the old Backups , press “Delete Backup” and then “OK”.
        http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
    6. Re-index Macintosh HD.
        This will take a while. Wait until it is finished.
        System Preferences > Spotlight > Privacy
        http://support.apple.com/kb/ht2409
    7.Try OmniDiskSweeper. This will show the storage size details of the items.
       https://www.omnigroup.com/more
       Select Macintosh HD and click  “Sweep Selected Drive” at the bottom.
       Delete the files you don’t want to keep.
       Be careful. Delete only the files that can be safely  deleted. If you are not sure about any file, don’t touch it.
    8. Move iTunes, iPhoto and iMovie media folders to an external drive.
        iTunes
        http://support.apple.com/en-us/HT201562
        iPhoto
        http://support.apple.com/kb/PH2506
        iMovie
        http://support.apple.com/kb/ph2289

  • How to increase C drive space in windows 7

    my dell inspiron mini having windows 7 starter installed
    it has tow drives
    (C) drive 14.8GB
    and (D) drive 212 GB
    now how to increase my C drive space
    please help me

    my dell inspiron mini having windows 7 starter installed
    it has tow drives
    (C) drive 14.8GB
    and (D) drive 212 GB
    now how to increase my C drive space
    please help me
    hi you should delete drive D and then extend drive C .
    for this purpose copy data form D to external Drive or C (if there is enough space) 
    and the go to disk management and the delete volume D and then extend drive C as you like 
    Whenever you see a helpful reply, click on Vote As Helpful & click on
    Mark As Answer if a post answers your question.
    LinkedIn:
      Facebook:
      

  • Flex charts: How to increase space between columns?

    Hello!
    I just added columnWidthRatio: 1; to my mx|ColumnChart to fatten up my columns a little. But now, there's no space between the X axis and columns, and between the columns themselves, so how do I increase this space?
    mx|ColumnChart { marginRight: "50"; paddingRight: "50"; } has no effect.
    Thanks!
    --Dwayne

    Somehow setting width="400" did not change anything. I also tried:
    mx|ColumnChart { columnWidthRatio: 0.8; width: 1000; columnWidth: 1000; }
    to no avail.
    Anyhow, I've reduced my columnWidthRatio to 0.8 though as you suggested. It looks better, but I'd still like some more space between the columns.
    Thanks!
    --Dwayne

  • How to increase java heap space on BIEE 10.1.3.3.1

    Hi All,
    I am using BIEE 10.1.3.3.1.
    while doing bursting i am getting java heap space error. how can i increase java heap space.
    Please anyone explain how to increase .. its very urgent
    Regards

    Yes, but I have not one, but TWO configurations.
    One configuration named StateTEDSTest points at the DataSource named teds_proxy_tedsdev_dasis8. Another named StateTEDSProd points at the DataSource named teds_proxy_teds_dasis8.
    What you seem to be saying is that I should only have one configuration, point it at a DataSource named, say, teds_proxyDS, then make teds_proxyDS reference the test database on the test application and the production database on the production application. I agree that that would probably work, but it negates any benefit of being able to define more than one configuration.
    What I asked is, how do I tell one deployment to use the configuration named StateTEDSTest, and another to use the configuration named StateTEDSProd?
    Looks like I'm not the first to ask this - see this thread:
    basic deployment question
    Unfortunately, no answer there either.

  • How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated

    Hello,
    How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.

    In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you
    ''troyable7 [[#question-1058550|said]]''
    <blockquote>
    Hello,
    How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.
    </blockquote>
    In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you

  • HT201364 You need 4.93 GB of available space. I cannot download OS X Mavericks. I obtain the following answer: Remove items from your startup disk to increase available space. How do I know what items I should remove in order to make more space available?

    You need 4.93 GB of available space. I cannot download OS X Mavericks for I obtain the following answer: Remove items from your startup disk to increase available space. How do I know what items I should remove in order to make more space available? Thanks.

    You should never, EVER let a conputer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your Mac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
    Other things you can do to gain space.
    Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
    This app will help you locate files that you can move/archive and/or delete from your system.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

Maybe you are looking for

  • Recently purchased Adobe Acrobat 9 Pro Extended.

    I was using 8 and was having issues with LifeCycle. Now that I have loaded the new version with the LifeCycle Designer ES 8.2 that came with the upgrade crashes when I try to upload a form to continue work. I have gone through the process of deleting

  • Cannot open pdf docs in Reader 9.1.3

    Recently installed latest Reader 9.1.3.  Cannot open my Adobe pdf's.  Get message to install adobe reader.  Still cannot open.  Have to actually open Reader & find pdf's to open - only then do they open, but not from my directory folders.  Any ideas

  • B & W pics

    I just downloaded PS elements 12, I am trying to figure out how to turn a photo into a B&W (I know that part) but I can't figure out how to make one object in that photo to remain in color?

  • Stolen MacBook: Watch out for strangers following you when you leave store

    I purchased my MacBook today around 2:00PM and someone broke my car window around 2:30 and stole my MacBook. I think they followed me from the Apple store, because they took nothing but the new computer in the package. Any suggestions on how to find

  • My MacBook Pro keeps saying The folder "Desktop" can't be opened because you don't have permission to see its contents.

    My MacBook Pro keeps saying The folder "Desktop" can't be opened because you don't have permission to see its contents.  I just took it in to the apple store a few weeks ago,  and since then I can't go into my desktop, I cant download anything to my