How to increase Intel HD Graphics (core i3) memory to or near it's maximum value ??

Dear All
I got Lenovo G560, Core i3 2.13 ghz, 3G of Ram, with Built in Intel HD Graphic card which minimum graphic memory is 32, the Maximum G.Memory is 1275, BUT the main Proplem is that the actual memory in use is Only 78 - 82 --> so I can't play any of the 512 new games like Need for Speed the RUN or Even NFS : Shift in a medium sitting (it hardly works or crashes in case of low sitting) also can't play Batman Arkham city 2011, it plays Batman arkham asylum within low sitting
So are there anyway to raise the actual memory in use to just reach 512mb or closer to gain full advantage of my laptop graghic card ?? hope anyone got a Solution for me. !
by the way working under win 7 home premium 32bit, running latest up to date direct X, and latest driver sofware for the intel HD Graphic display adaptor  .. Ready to increase the ram to be 4 G if that will SURE raise the actual VRAM ..

first of all, g serie lenovos are not designed for games.
if you have switchable graphic support ( i don't think g serie does ) try to activate it. otherwise, you have only one option that to increase the ram so shared graphic card can use more ram.

Similar Messages

  • How to disable Intel HD graphics and use nvidia card?

    Hello,
    I would like to ask for some assistance.
    I want to use the Gtx 630m but instead the laptop keeps using the Intel HD chipset.
    What I tried so far:
    1. In nVidia control panel I set nVidia graphics card as default in global setting, and for several programs I frequently use as well
    2. In BIOS there is no option for Switchable Graphics
    Is there any BIOS update for this?
    Thanks!
    Laptop:
    HP Pavilion 15-b102sh Sleekbook
    Model: D4N32EA
    System version: Windows 8.1

    @Spinkick ,
    Hi again and thanks for posting back.  Here is a link from our forums that deals with the same issue. There is a pile of information here on how to deal with this.
    How to switch to Nvidia graphics instead of intel
    Here is another one from HP support.  It is not for the same model, however it covers the same topic and works with the nvidia software.
    NVIDIA Optimus Graphics with Integrated Intel Graphics on HP Pavilion dv7t-7000 CTO Notebook PCs (Wi...
    If you are trying to stop using the intel gpu all together you are not going to be able to do that at all.
    They system and the software are designed to work with both GPU chipsets and assign accordingly.
    I hope this helps.
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • How to disable Intel HD Graphics (HP Pavilion G6-2303sq)

    I have HP Pavilion G6-2303sq.
    It has Intel® HD Graphics 4000 and AMD Radeon™ HD 7670M.
    I have all drivers and updates installed.
    I tried to disable in BIOS, but there is no feature.

    Use the configure switchable graphics method.
    Set the high performance graphics adapter as the current adapter. Untick the automatically select power-saving GPU when on battery option.  Click on Apply and then OK.Once this is done, the only adapter that will be used is the ATI Radeon HD adapter whether on AC power or battery.
    regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Intel hd graphics 5000 dedicated memory on windows 7

    i have a macbook air early 2014 edition. i have installed windows 7 ultimate 64 bit on it using bootcamp but the dedicated video memory of the GPU is only 64 mb. is there a way to increase this memory to give me better performance ?

    Review this thread:
    https://discussions.apple.com/thread/2770866?start=45&tstart=0

  • Flash player 11 (released version) - s/w only in Intel HD graphics...

    FYI
    My away3d which worked before is not not being 3d accelerated with released flash 11:
    Its a newish dell i7 laptop 2011:
    Graphics Specs:
    I went to dell and made sure the latest intel driver is installed,  Dell seconds sources these you cant get one from intel directly, if that matters)...
    The sytem tray util reports this as whats installed,
      intel hd graphics core i5 
      driver version 8.15.10.2104
      win7 serv pack 1
      video bios 2026.1
      graphics memory 32mb
      intel r hd graphics - acceleration in use
    (but now not in just released flash-11)
    Flash 11 3d accelerated checkbox is checked.  (same speed with it checked or not-checked, so my only conclusion is that I am running s/w only without 3d acc) - 3fps on the flex-away3d code I am working on.
    Also perhaps of note.  I tried the Stage 3 video test from developer connection (and unsurprizingly is said stage video = false when playing big-bunny)
    Hopefully there is some config change/patch I can apply to make this go else I cannot proceed with my new development until this is 'fixed'...
    TIA gregh

    Hi Carl.
    Perhaps this is the root issue here  (but, I cant get driver directly from Intel as they redirect me to the 'dell - video drivers site' from their video drivers page) and it wont install directly from intel.
    The latest Certified dell - intel driver from dell support, which I have installed, is at version:  8.15.10.2104 
    Not sure there is any way to override this behavior(s) and install a later (better driver) and I dont want to smoke my laptop 'video' in the process)
    Hopefully a path will unfold here to straighten this out for one and all.  Cheers //GH
    PS:  Charbs09 -- just sent you the outputs from DxDiag as requested. 

  • How to increase no. of decimal places in a cube

    Dear Friends
    Can you tell me
    how to increase no. of decimal places in a cube
    i want 5.98765 this value in the keyfigure
    but it is allowing me only 5.987 only 3 digits after decimal
    urgent
    Thx

    Hi Laxmi,
    Inorder to store data with more than 3 decimal places,you can check the keyfigure with maximum precision checkbox available in the additional properties tab of the keyfigure.By which you can store upto 9 decimal places.
    Or
    You can change the data type from DEC to FLTP,by which you can store data upto  15 decimal places in the cube.
    Also by changing decimal places in Bex allows you to change the decimal places for the data to be displayed and if the data in the cube is holding 3 decimal places how can you display 5 decimal places in report.
    Hope it helps....
    Regards,
    Umesh.

  • Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

    Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

    The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

  • Problem  High running Temperature  Specification iMac 27 inch  Mac OS X  Includes Software Snow Leopard upgraded to Mountain Lion  OS X 10.8.03 (1278) 251 GB Flash Drive 2 TB  Sata disk Processor 3.4 Ghz Intel Core I7 Memory 16 GB 1333 MHz DDR3  Graphics

    Problem
    High running Temperature
    Specification
    iMac 27 inch
    Mac OS X  Includes Software Snow Leopard upgraded to Mountain Lion  OS X 10.8.03 (1278)
    251 GB Flash Drive
    2 TB  Sata disk
    Processor 3.4 Ghz Intel Core I7
    Memory 16 GB 1333 MHz DDR3
    Graphics AMD Radeon HD 6970 2048 MB
    Video: Software Final Cut Pro X  10.0.8
    I use the imac mainly for editing Video which when doing so it has reached temperatures of near to 60° C which causes the program to become unstable and needs to be cooled down to operate correctly.
    An Apple technician (by phone) advised me to download an smcfancontrol.  This allows each individual fan to increase speed and also advises the current temperature at °C.  The smcfancontrol has been downloaded but this has not resolved the problem.  By increasing the speed of the fan more heat is generated and creates additional noise. 
    I have since taken the iMac to an Apple Store for examination as suggested by APPLECARE when the fans were found to be working correctly.  An Apple Store technician carried out a test, but not whilst working under the pressure of FINAL CUT PRO when the iMac generates a high temperature.
    The Temperature Specification  for this model is
    Operating Temperature 20 °c to 35°C
    Storage Temp.47°c
    Clearly the temperature my iMac  is operating at is excessive and could cause the computer to break down prematurely.  Has anyone experienced this problem.
    Frank Howell

    When was the last time you cleaned/vacuumed out all of your iMac's vents, slots and ports.
    You need to do this with the iMac powered down, disconnected from power and everything disconnected.
    Lay your iMac, screen down, on a soft surface, like a heavy towel. Use a small electronics vac, or portable or full size vac with hose and a crevice tool attachment and carefully and slowly vacuum every vent, slot and port on your iMac.
    Then reconnect everything up, power up and download and install iStat Pro. Start working, then report the temps of your iMac after this has been done.
    When using SMCFan Control, it is important not to run the fans at too high an RPM. This doesn't generate heat on its own, but will suck in more dust, lint and dirt into your iMac, and that will be the cause of additonal increases in heat.
    I run my fans in the range of 1400-1600 RPMs. You can go as high as 1800 RPMs but it is important to keep the RPM range below either 1800 or below 2000 RPMs.
    I, also, run a very small desktop fan pointed toward the upper back of my iMac to keep temps down even further.

  • Have MacBook Pro (ancient) has 2.16 Ghz Intel Core Duo with 1 GB 667 MHz RAM using OS 10.4.11. Can I upgrade OS? If so, how far? And can I add more memory? I realize this is an old laptop but I need to wait to upgrade to new.

    Have MacBook Pro (ancient) has
    2.16 Ghz Intel Core Duo with
    1 GB 667 MHz RAM
    using OS 10.4.11.
    Can I upgrade OS? If so, how far?
    And can I add more memory?
    I realize this is an old laptop but I need to wait to upgrade to new.

    if it is the core duo, mac OS X 10.6.8., max ram 2gb.

  • E6510 Core i5 Intel HD Graphics DisplayPort 1.2?

    I have a late 2010 E6510 Core i5 w/ Intel HD graphics.  Can this laptop support DisplayPort 1.2  I'd like to use it with a e-dock and drive two 4K monitors via MST.  Have a feeling this laptop is DP1.1 only.  Can someone please verify for me?  THANKS

    It is not the speed of the processor that really matters anymore.  It is the speed of the media.
    Thunderbolt offers superfast speeds, and so does SSD.  If you get a hard drive, you'll be waiting for it a lot longer to process information.  
    The SATA interface is also fairly fast.
    Your real unknown is going to be your software, and whether or not it is optimized for your hardware.
    Do you have an idea what software you are going to use?

  • Core Image and Intel GMA950 graphics processor

    Does the Intel GMA950 graphics processor support Core Image?
    Mac Mini   Mac OS X (10.4.4)  

    And it's fast! (contrary to lots of the bad hype about integrated graphics sucking.) Intel and Apple did their homework on these minis.

  • Increasing shared VRAM on Intel HD Graphics 3000

    Hello,
    Question about MacBook Pro (13-inch, Early 2011) with Intel HD Graphics 3000. I upgraded RAM with 16GB, and wonder if it is possible to allocate more then 512 MB of system memory for shared VRAM. Now system profiler shows 512 MB shared VRAM, the same like it was with 8 GB RAM before the RAM upgrade.
    "About integrated video on Intel-based Macs" topic (http://support.apple.com/kb/HT3246) mentions MBPs with 8 GB of RAM only.
    Thanks!

    HI M,
    On a Windows machine, you can go into the BIOS and change RAM allocation.
    I have found nothing to suggest the same is true on a Mac. It appears it is controlled in ROM, and unless Apple makes a firemware upgrade, it is what it its. Which begs the question, what is it?
    Given that the article you cite states the VRAM allocation goes from 256MB to 512MB by increasing RAM from 4GB to 8GB in one example, it would seem that amount might go up to 1GB VRAM with 16GB of RAM. As you're probably aware, Apple bases everything on RAM available at time of production of the Mac, and never goes back to change specs as RAM density increases, so it may also be "locked in" at 512MB for 8GB.
    Bottome line: It's possible the base VRAM available may indeed go up as needed on your Mac, but that's far from certain. There is information out there on the internet suggesting this "as needed" theory, so you may want to do further searching reading and see if you can find that needle in a haystack.

  • Increasing Dedicated Video RAM? (Intel HD Graphics - Satellite A665-S6086)

    My Satellite A665-S6086 Laptop uses Intel HD Graphics, and I wish to increase the dedicated video RAM.
    Through dxdiag, it says I have 1696MB of Approximate Total Memory, but I only use 64Mb according to: http://www.systemrequirementslab.com/CYRI/analysis.aspx?name=The-Elder-Scrolls-V:-Skyrim&id=11231&se...
    I went into the BIOS Setup -> Advanced, but was unable to find anything to alter the amount of Video RAM.
    If anybody has a solution to this, please share it.
    Thanks,
    Chibichuba. 
    Solved!
    Go to Solution.

    ...But you are not able to with the stock Toshiba motherboard....
    Then you still cannot do it unless you replace the whole motherboard.
    Mike

  • I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

  • Download requested, but site responds that my computer is not compat. with ML.  Is a MacPro 2x3 GHz Quad-Core Intel Xeon with 16 GB memory.  How can this be?!

    Download requested, but site responds that my computer is not compat. with ML.  Is a MacPro 2x3 GHz Quad-Core Intel Xeon with 16 GB memory.  How can this be?!

    Specifically, you must have the following to update to Mountain Lion:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    More HERE.

Maybe you are looking for

  • Redefined method is not getting triggered while Debugging

    Hi Experts, I have a requirement wherein I need to desplay Role information in Header level. To achieve this I have enhanced component ICCMP_BP_DETAIL and Window ICCMP_BP_DETAIL/MoreWindow. I have redefined method IF_BSP_WD_HISTORY_STATE_DESCR~GET_ST

  • Missing post message in client session monitoring

    Hi, I have synchronized creating a record of a data object, in the message monitoring tool appears that the message is processed correctly but if I look the session at the client session monitoring that message did not appears, would appears as post

  • What to do with iTunes when you get another iPod?

    My daughter has an iPod mini that is completely filled up. For her birthday, she want to get a new 30G iPod. The thing I am wondering about it whether or not she will be able to use her current iTunes library with the new iPod. I would not want to se

  • Correlating a flow from client to the VIP and from the VIP to the server

    Hi, we need to look at a flow from a client to a server that is traversing a VIP on the ACE. So, we pulled the sniffer traces between the client and the VIP and also between the VIP and the back-end server. How do we find the same flow on these sniff

  • Cannot un disable my phone because the time is incorrect?!?

    my iphone is disabled after my little boy kept putting in the wrong code but the time on my phone is incorrect and has been for some time which is another issue in itself, so it wont actually go down?!? someone please help!!!!!!!!!!