How to increase iPhone ring time

Is there a way to increase the ring time on the iPhone before it goes to voicemail

it's a carrier setting not a phone setting

Similar Messages

  • How do you change ring time before giong to viocemail?

    How do you change ring time before phone goes to voicemail?

    You can configure many call-handling features on the iPhone, but not the number of times an incoming call rings before it goes to voicemail. Only your carrier can change that variable. Wireless service providers uniformly grant incoming calls four rings within roughly 20 seconds before sending them to voicemail. If you find that ring length too short or too long, contact your carrier to adjust it.

  • How to increase the waiting time for response in Adapter Engine not in IE

    Hi Experts,
                It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired.  We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
    kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with  status flag Log version.
    Thanks & Regards,
    Srihari.

    Hi,
    Please see
    How To... Investigate Timeouts In Synchronous XI/PI Scenarios
    It will answer all your queries
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

  • How do I extend ring time on calls?

    How do I extend ring time on calls?

    Are you asking about how long before it goes to voicemail? If that is the question, then you need to contact your carrier. They are the ones that control that. It is not done at the phone level, that is carrier level settings. It is not based on rings, it is based on time. They may be able to extend it for you.

  • HT4515 How do you adjust how long the iphone rings for before going to voicemail?

    How do you adjust how long the iphone rings for before going to voicemail? Mine diverts after only a couple of rings.

    I believe you do that through your phone service provider.  I wonder if you have unheard messages in your voice mailbox.  I think some carriers use that mechanism - diversion to voicemail faster if the recipient has unheard messages.
    I do not believe you can change this directly on your iPhone.

  • How to see the Ringing Time of a Missed Call?

    How to see the Ringing Time of a Missed Call?

    I wanna see the missed call as a Genuine Call (Ringing for the full time) or a mere signal of a few second as a request for call back.

  • How to increase database connection time out?

    Connection con = DriverManager.getConnection(.......
    If we use this con object, let say, after 5 hours, then exception occurs because connection has been closed. So how can we increase its connection time out so that we can use the same connection, let say, after 2 days?

    You don't want to keep a connection open for 2 days, use a connection pool.
    http://jakarta.apache.org/commons/dbcp/

  • How to increase # of rings before voicemail answers?

    My phone rings 2 times before voicemail answers, need to increase to at least 5 rings. Tried everything, user guide etc. Any ideas?

    Here is the code that I used from my Treo days. Tried it on my iPhone and it worked.
    1. To get the current call forwarding status, enter *#61#[SEND] into your phone.
    2. Write down the 10-digit number(ignore the +1), this is the phone number that your calls are currently being diverted to.
    3. Enter *61*[number]*11[delay]#[SEND] into your phone using the phone number (numbers only) as reported by the status & the delay can be set to (5, 10, 15, 20, 25, or 30) seconds.
    4. To verify that the settings are correct, enter *#61#[SEND] into your phone.

  • How to increase the logout time

    Hi Guys,
    My PIA logs out for every 20 minutes. i do not want that happen. I want to increase the time for logout to 1 hour.
    Can any suggest me how to do that?
    Please help me.

    Then you should be able to find under Peopletools menu, the webprofile configuration, choose the one you are using to start the webserver (if you don't know which one is using, check the configuration.properties file, it should be somewhere in that file), and modify the timeout on the next page.
    Nicolas.

  • Increasing the ring time on 8110 Pearl smartphone

    My phone only rings 3 times before going to voicemail.
    Other mobile phones I've used had an option to set the time the phone should ring for in seconds (usually up to a maximum of 30 seconds).
    Does anyone know if this option exists on the 8110 Pearl smartphone? 
    Solved!
    Go to Solution.

    This is the code I have used:
    If you have a GSM based phone, some have had success by dialing this number from your phone: **61*XXXXXXXXXXX**30#
    Replace XXXXXXXXXXX with the number of your carrier voice mail center (find it by looking at your Phone Dialer > Options > VoiceMail > Access Number. Put your access number in place of the Xs above.
    For example, the T-Mobile voice mail access number is 18056377243, and thus the string to dial would be **61*18056377243**30#
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • C2 -01 how to increase ringing time before going t...

    hi - can anyone please advsie how to increase the ringing time - before call goes to message bank- thanks 

    Though for S60, have a look at this thread ..Should be the same way it needs to be set..

  • JDBC Receiver - how to increase Read Time

    Hi Experts,
    Please tell me how to increase the read time and response time in the JDBC receiver adapter.
    Thanks,
    Kalyani.

    hi,
    Check 2.3.5 section of this document:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747
    According to document:
    In the advanced mode table section of sender channel and receiver channel configurations, we can set driver properties for each DB connection. Any such property would have to contain prefix 'driver:'(with out quotes).
    For Oracle Database JDBC thin driver 10.2.0.3 version, the property oracle.jdbc.ReadTimeout helps to set read timeout while reading from the socket. Also for setting login time out in Oracle, we use oracle.net.CONNECT_TIMEOUT. To set these two properties use as follows: driver:oracle.jdbc.ReadTimeout 1000 driver:oracle.net.CONNECT_TIMEOUT 1000 The TimeOut Driver properties like ReadTimeout and CONNECT_TIMEOUT are in milliseconds.
    Refer note 1078420 for more details
    Thanks.

  • How to answer iPhone on iMac?

    How to make iPhone ring on iMac?

    Hi, grammybonnie.  
    Thank you for visiting Apple Support Communities.  
    Here are a couple articles that you may find helpful with this issue.  
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity
    http://support.apple.com/en-us/HT6337
    Get help using Continuity with iOS 8 and OS X Yosemite
    http://support.apple.com/en-us/TS5458
    Cheers, 
    Jason H.  

  • Iphone 4s on Orange in UK. How do I increase ring time before answer service kicks in?

    iphone 4s on Orange in UK. How do i increase ring time before orange answer service kicks in?

    Tried that. They told me to
    **61*
    Check answer phone number
    then *11*20##call key
    Made no difference

  • Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
    GB

Maybe you are looking for

  • HP Pavilion dv8t-1100 Hard Drive Diagnostic failure - but runs fine?

    I have a HP Pavilion dv8t-1100 CTO Entertainment Notebook PC (Windows 7 Professional 64-bit) that seems to run just fine.  On a whim, I ran the pre-boot diagnostic check and received the following error code that the hard drive test had failed. Q7NK1

  • Transferring from Vegas to FCP

    hi all, has anyone had to / managed to transfer a work in progress from Vegas (PC) to Final Cut Pro (Mac) successfully? From what i can see, Vegas can export AAF, but FCP can't read it. FCP can read XML, but Vegas can't export it. Tried exporting an

  • PDF preview handler

    Can someone please help.  Since updating to Adobe X1 on a windows 8 system, some emails with an attached PDF file will not open.  Keeps coming up with the error 'PDF preview handler' Thank you

  • Reports in MS Excel Application

    Hi, All, We are using Oracle 10g database and forms. We have installed Jinitiator version 1.3.1.22. We are generating some of the reports in MS Excel Application from the Oracle forms. To generate the report in excel format we are using Client_OLE2 c

  • How to re-upload YouTube video with same settings

    I d/l'd a YouTube movie. When I opened it in iMovie, the dimensions and quality appeared (visually) to match what shows on YouTube. I made some edits (added some titles), and re-uploaded it following the instructions at https://www.google.com/support