How to increase Page Information

Is here a way to increase the font of the "page information" when I print an InDesign page? Thanks!

Hi all,
InDesign CS5 (7.0.4), Mac OSX 10.6.8
This sounded like a great option, and I downloaded the .mrk files and put them in the location outlined in the PDF... But when I open a document and go to print it, in the "Marks and Bleed" section of the dialogue, only the Default setting is available. I even tried putting the files in ~/Library/Application Support/Adobe/PrintSpt but no-go. They don't seem to show up. I saved the files as plain text through TextEdit, and there are no spaces in the names; the file extension is .mrk
Could the location of this files in InDesign CS5 be different than in CS3? Or maybe CS5 doesn't use .mrk files anymore? If anyone knows, or has tried this in CS5 and it works, let me know.
Cheers!
-Mikey

Similar Messages

How to increase page size for balance file upload in Workspace.

Hi All,
Please suggest how to increase page size for balance file upload in shared Workspace pages.
Thanks,

A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

Windows7-how to increase page width & reduce font size

Compared to internet explorer, viewing each page on Firefox is difficult. Titles and images are overlapping and limited page width leaves blank columns on both sides, resulting in overlapping vertical text on the right side. Is there a way to 'Landscape' every page and also how do I reduce font size

See
how to increase the font size in outlook mail on iphone 4s and ios 6.0.1 operating system?

How to increase page size in existing document and add margins uniformly.

I have a long document that I must print out to PDF, but I must now increase the page size. I do not want to change the text at all; just increase the sizes of the margins. When I increase the page size , my text frame remains the original distance from left-hand margin. In other words, the top and bottom margins increase evenly, but for the left and right margins, only the right margin grows. This leaves the text frame shoved over to the left-hand side of the page (or towards the binding in a two-page spread).
I would like for the page size to increase so that all margins increase in a uniform manner, that is, so that the text frame remains centered in the page, both horizontally and vertically. At present it is centered only vertically.
Thanks very much.

A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

Photo Album-at 100 pg max -how to increase page amount? Other products?

I want to create an album for a lots of photos. I've just reached the 100 page maximum on the iphoto album and I'm only half way through my photos. Are there ways to increase the total pages in a single book? Does any one know of other similar products that don't have a page limit?
Thx.

aklein:
Welcome to the Apple Discussions. You can't increase the 100 page limit. Here are a few sites what offer books. Don't know what their limitiations are.
Sites for Ordering Bound Books
Ofoto
Shutterfly
SharedInk
ImageStation
PhotoWorks
You'll have to do a google search for online photo books to see what else is offered if these are not what you need.

How can get page information

Dear All,
I have the VO contain the values of emp_id ,name ,number,
if i click the save button i will able to get the values of in the table by iteration Row object
How i can able to get the Values of forms currently appered in the screen

Hi Karthick,
vo.getCurrentRow(). method will return you current row of VO. It is the row which appears on the form. You can get your requried values from this row.
Abdul Wahid

How to increase the space of a page in Application Designer ?

Folks,
Hello. I am developing a page in Application Designer.
I need to place multiple records with many fields in the page. But the entire space of the page is not enough to place the fields. We need to use a vertical scroll to increase the space of the page to hold all of the fields. But I don't understand how to do this feature.
Can any folks tell me how to increase the space of a page in Application Designer in order to hold many fields ?

Folks,
Hello. Thanks a lot for replying. It's correct !

How can i exclude information pages from being printed in a dynamic XML form?

Hi there,
i am building a dynamic XML form in Adobe LiveCycle Designer ES2.
In this form there are pages with information that help the end user fill out the form, but to use - those who process the forms after they have been sent to us - these pages with information are irrelevant.
Is there a way to tell the form to omit these pages when printing.
Currently i have set the pages mentioned to be only visable on-screen. But doing so results in an empty page being printed (only the master page information is visable.)
Any ideas how i can solve this issue?
Thank you.

Create a new master page and set that page to visible screen only. Set your subforms to use that master.

How to increase the width & heigt of page in smart forms...

Dear abaper,
In smartform i have one problem,
the default page size is 20 cm ht & 20 cm width,. but i want to create 4 windows havehing
leng & width of (total 4 windows) more the 20*20cm .so an error message is displaying ''window dose not fit on page 1''.
can any one sugesst how to increase the page size (weather it is possible or not) .what is the soulution for this.
regards
veera

Hi,
Open the Smartform and click on FORM PAINTER.
A graphical window will appear displaying all the windows you have created.
These windows are going beyond the paper size. Resize them so that they would fit in the page. You can also extend the page by simply clicking & dragging the edge of the window.
Best regards,
Prashant

How to Create SEO Needed Page Information...???

Hello!
How you can create page information with iWeb?
There should be:
1. File Name (http://www.something.com/page.html,
2. Page Title,
3. Keywords, and
4. Description.
How can I create above information?

Hello,
All of this is already present in iWeb, even on a blank template.
When you add a page and give it a name in the left pane of iWeb, that will be the filename.
When you hover your mouse over the placeholders, you'll see a pop-up text explaining what to enter into them. (ex. Type a heading... and Type the title...)
Type a description containing specific keywords in the main text box .
Is this helpful or do you want more info?
Kind regards,

How to increase or reduce Fx page scroll when scroll mouse

When I scroll mouse Flex App page scroll very slow
How to increase or reduce Fx page scroll when scroll mouse?
Tell me
Thx

cjuan1morb4ulv wrote:
how to remove a black border box that continously tabs to each field automatically till end of web page; restarts to top of page, cannot stop this box. Scroll bar cannot be controlled with mouse, scroll bar returns automatically to the top of scroll slide every time I move the bar to the bottom of the scale. Also, there's a rectangular text box (with black background and white text) that is always on the desktop that emulates a typed text, HTML, or cmd function.
The first two problems (box cycling from element to element on page, scroll bar returning to top) can be caused by a stuck (or defective) Tab key on the keyboard. Such damage can be caused by a liquid spill; just one tiny droplet is enough to short a wafer switch under one key.
The last issue (black box, white text - sounds sorta like a debugger window) I haven't seen, but could be caused by something similar.
To check for that, try using a different keyboard. If you're using a wireless keyboard, turn it off and see if the oddities stop.

DB_ACTION_STATNEW - Error - How to increase shared memory in shadow instanc

Hi all,
We are facing the below error in the DB_ACTION_STATNEW phase:
TRACE-INFO: 82:                                                                                13 4.822960
TRACE-INFO: 83: [developertra,00000]   WHERE TABNAME = :A0;                                           8 4.822968
TRACE-INFO: 84: [dbntab      ,06694] ***LOG BY4=>sql error 604    performing SEL on table DDNTT
TRACE-INFO: 85:                                                                                222 4.823190
TRACE-INFO: 86: [dbntab      ,06694] ***LOG BY0=>ORA-00604: error occurred at recursive SQL level 1
TRACE-INFO: 87:                        ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","select t.ts#,t.file#,t.block...","Typecheck","seg:kggfaAllocSeg")
TRACE-INFO: 88:                                                                                21 4.823211
TRACE-INFO: 89: [dbeh.c      ,00000] *** ERROR => missing return code handler                       13 4.823224
TRACE-INFO: 90:                         caller does not handle code 1 from dbntab.c[3718]
TRACE-INFO: 91:                         ==> calling sap_dext to abort transaction
HALT 20080410111303
We have a physical RAM of 64 GB.
dcecqv1:root > dmesg | more
Apr 10 11:24
   $Revision: vmunix:    B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
Memory Information:
    physical page size = 4096 bytes, logical page size = 4096 bytes
    Physical: 66399504 Kbytes, lockable: 51408244 Kbytes, available: 59648572 Kbytes
From the error message, I feel that I need to increase the shared memory, can you help me how to increase the shared memory now, bcos system is now running in the shadow instance.
Thanks & Regards
Senthil

Thank you for your mail Shaji.
SQL> show parameter shared_pool_size
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared
pool","select x.inst_id,x.indx+1,ks...","Typecheck","seg:kggfaAllocSeg")
When I tried to see the shared_pool_size it gives the above error.
Regarding the three log files:
STATNEW.LOG
LISTNEW.LOG
DBSTATNEW.LOG
- I didnot find STATNEW.LOG file in the path /usr/sap/put/log
- supadm> cat DBSTATNEW.LOG
1 ETQ201XEntering upgrade-phase "DB_ACTION_STATNEW" ("20080410111258")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '02', GwService = 'sapgw02'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=0
4 ETQ389 reading file "LISTNEW.LOG" in directory "/usr/sap/put/log".
4 ETQ275 Created SQL-script "EXSTATE.ORA"
4 ETQ275 Created SQL-script "EXSTATC.ORA"
4 ETQ276 Executing SQL-script "EXSTATE.ORA"
4 ETQ001 START time "2008/04/10 11:12:58"
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/SUP/SYS/exe/run
4 ETQ399 ext. env.: LD_LIBRARY_PATH=/usr/sap/SUP/SYS/exe/run:/opt/java1.5/jre/lib/IA64N:/opt/java1.5/jre/lib/IA64N/server:/opt/java1.5/jre/../lib/IA64N
4 ETQ399 2008/04/10 11:12:58: put_execute: (tp) forkpid:2537
4 ETQ002 END   time "2008/04/10 11:13:03"
4 ETQ278 Errors during execution of SQL-script "EXSTATE.ORA"
1EETQ203 Upgrade phase "DB_ACTION_STATNEW" aborted with errors ("20080410111303")
supadm>
supadm> tail LISTNEW.LOG
NAME= WTY_OBJNR_INDEX
NAME= WTY_PARTNER_TAB
NAME= WTY_RCLHST
NAME= WTY_RCLOBJ
NAME= WTY_RELOB_TAB
NAME= WTY_RELOB_TAB_TX
NAME= WTY_TABLE_ALV
NAME= WYT2M
tp_exec_dbscript: 1 statement(s) successfully processed.
supadm>
Can u pl help
Thanks
Senthil

How to get user information from ldap - bpm11g

hi all,
i need know how to do get information from ldap, but using adf bean for show user data in adf form.
anyone knows about this ?
tks.

Neal wrote:
>
Hi,
I am using WLS default authentication to protect my JSP pages. Can someone tell
me if it is possible to add more fields to the default login box (in addition
to login and password boxes, I want to ask user the department name). In additional,
can WLS propogate this information (department name) along with other security
credentails to other J2EE components such as EJBs? In my EJBs I want to be able
to get the department name that user provided during login and then use that for
conditional business logic.
Any insights on this subject will be greatly appreciated.
TIA,
-NealYou can't do this with the default simple authentication. That can only handle a
username / password combination.
You should be able to do this with JAAS. You could write a LoginModule that
populates the department as a Principal or public Credential on the Subject in
addition to the normal authentication. You would have to do a callback handler
that passed through the department info to it.
This link has more on WLS's stab at JAAS:
http://e-docs.bea.com/wls/docs61/security/prog.html#1039659
Once you have associated the Subject with the access control context by invoking
a doAs() you should be able to get it back at any point with
Subject.getSubject(AccessController.getContext()) to get access to the
department info.
It will all be a bit of a chore, mind.

How to Increase Number of Images from 500 in a LR3 Flash Gallery

I noticed people asking (and I myself needed to know) so I thought I would explain how to increase the number of images (from 500) in a Flash gallery in Light Room 3
1. I exported a Flash gallery from LR3 and it capped the gallery at 500 images.
2. Because I had roughly 600 images to put in the gallery, I exported the remaining 100 as a separate flash gallery. (Going ahead and exporting 2 galleries will save you headache in a later step)
3. I combined all the images folders (copying "large" images from one folder to the "large" folder in the gallery I want to upload to my site, etc.) so that the files are all in one location.
4. The next step is to increase the gallery maximum in the code. Access (from the exported gallery) GALLERYNAME/resources/mediaGroupData/group.xml and open the group.xml file. The line of code you will be changing is <media totalGallerySize="500"> Change the 500 to the number of photos you want in the gallery.
5. This next step isn't too complicated, but it is specific. You know have to tell that flash file to look for the images you just transferred to the images folder. The best way to do this is to open the group.xml file for the second gallery you exported. Copy all the code beginning with <item> to the bottom of the page. This code tells the gallery to look at your specific images (Note: you'll notice within each item the names of your image file)
6. Return to the (other) group.xml file of the gallery you plan to use (with all your images in it). Scroll to the bottom and erase the lines </media> and </mediagroup> becaue you will repaste them in a moment. Next, paste the copied code there.
7. Save & check your browser!
I hope this was clear...please comment back and I'll clarify if needed.
ro

500 images in a single gallery is too many - think of the poor viewer!
But if you must create Flash galeries with more than 500 images, you're better off editing the underlying engine - here's one link showing how to do it

How to write log information into SM37 batch job log

Hi,
I have a report running in batch mode, and I would like to log the start time and end time for some part of the code (different Function modules). I need to write this log information into the batch job log. Therefore I can check the time frame of my FMs.
After search the SDN, I can only get some information on how to write log into the application log displayed in SLG1, but that's not I want. I want to write batch log information, and check it in SM37.
If you have some solution or code to share, please. Thanks a lot.
Best Regards,
Ben

Hi Nitin
Thanks for the reply. Could you explain it with some code ?
I tried to use the write statement , but it did not wrok. I could not see the result in SM37.
write : "start of the FM1 processing".
FM1 code
write : "end of the FM1 processing".
but those two statement did not show in SM37..
1) how to use a information message ?
2) how to use NEW PAGE PRINT ON and PRINT OFF command. ?
I would appreciate if you can write some code ,that I can use directly.
Thanks a lot.
Best Regards,
Ben

How to increase Page Information

Similar Messages

Maybe you are looking for