How to increase performanceof query based on Infoset?

How to increase the performance of a query based on a Infoset?
As per designing of query, all the necessary fields are placed where they are required.

Hi Akshara ,
To improve performanceof query try to remove unnecessary characteristics, attributes, or key figures ,Superfluous conditions or variables .Large InfoCubes and Complex hierarchies .Variables populated by user exits
For characteristics specify either variables or restrictions .
You can create indexes on DSO and Aggregates on cubes (if any).
Please go through the links :
http://help.sap.com/saphelp_crm40/helpdata/en/77/4a213cc534f20ae10000000a11402f/content.htm
Re: Performance of query built on infoset
Query performance issue - Infoset query
Hope you will find this helpful.
Regards,
Jaya

Similar Messages

How to build a query based on(UNION) 3 vendor InfoObject

Dear Experts:
I have a requirement to build one query based on 3 vendor InfoObjct: 0VENDOR + 0VEN_COMPC + 0VEN_PURORG.
I tried to build a multiprovider upon these 3 infoobjects, but when I Identify(Assign) the key for each InfoObject, supposely there should be 3 InfoObject for me to check (0VENDOR, 0VEN_COMPC and 0VEN_PURORG) so that I can UNION these 3 infoobjects together on vendor number. But since the reference infoobject of these 3 vendor master data is different, I can not check the 3 together.
Can anybody let me know how to build that query? I only need vendor number show once, and the attributes of 0VEN_COMPC and 0VEN_PURORG can be union to 0vENDOR.
Any post would be appreciated and thank you all in advance!
Best Regards!
Tim

Hi,
you can create a link between the vendor objects itself, means link 0vendor with 0ven_compc and 0ven_purorg. This should give you a list of all vendors multiplied with the comp codes multiplied with the purch. org. May be here it is possible to create another link between a attribute (eg. comp_code of 0ven_purorg with comp_code of 0ven_compc). In case it is not possible you need to add this link information somehow. Another option might be to create 2 queries. One on a infoset of 0vendor and 0ven_purorg and another one on 0vendor and 0ven_compc.
regards
Siggi

Variables in the query based on infoset

Dear all,
I defined a variable on an infoObject in the query designer. However, when this infoObject was used in the infoSet, the variable I defined could not be seen. So in the infoset how can I use the variable I defined in other query not based on infoset? Please advise. Thanks.
Jin Ming

I have the same problem:
I created an Infoset where I am using an Infoobjet that is used in a Cube.
I have defined variables on this Infoobjet but one of them cannot be used in the new Infoset even if in the new Infoset the links between infoobjets are the same as in the Cube.
Thank you for any help.
Stanislas

Webi base on BW query based on Infoset comes back with wrong values

Hello:
I have a Webi report on an OLAP Universe, on Bex Query.
The bex query is based on 1 INFOSET.
When I run the webi report the values that comes back a totally wrong values.
The correct results are not brought back.
When I do a test with crystal reports to the infoset, I can see the correct values. (I'm aware crystal uses different drivers).
The test is BW query designer, and crystal brings back proper values from Infoset based BW query.
Webi on Infoset based BW Query comes back with wrong data.
query is simple.
Pull in 3 attributes, 3 key figures, where componentkey = "111"
I get 36 rows in Crystal and 36 rows in Bex Analyzer, 36 rows in BW query designer (web analyzer).
I get many rows in webi (almost like a CARTENSIAN product).
I search a round this forum but still did not see a conclusive answer to this problem.
But I see another thread that several others faced this same issue without a resolution.
My environment.
BOE XI 3.1 SP2
No fix packs
SAP IK 3.1 SP2
HPUX-IA64
Thanks in advance for any help.
Dwayne

Was this problem ever solved?
I am having a similar problem with an infoset based query.
I have created the BW infoset, and confirmed that the correct data is returned from the underlying infoproviders. A simple BW query on that infoset yields the same results.
Create the universe, and then the WEBI, and WEBI now shows hundreds of records where I expect 10. Data is being returned in WEBI that definitely shouldn't be there. It's almost like the restrictions applied in the characteristic restriction area of my BW query are being ignored, even if I include them in the WEBI query.
Cheers,
Andrew

Search on key or text in query (based on infoset)

Hi all,
I've build an infoset based on the masterdata 0employee and an ODS. After that I build a query on the infoset with in the rows the object 0employee. On this object I created a user-entry variable. By executing the query, the variable screen will be available. When I click on the search button (or F4) I only see the key values. I want to display also the TEXTvalues, is this possible...and what is my action to do?
I hope my question is understandable
Regards,
Pieter

That is strange. I havent seen that happen.
Sometimes infoobjects have too many attributes and you may have to scroll a long way to get to the texts.
or does it just show the keys and nothing else ?
Did you check what the default description is set for this infoobject on the BEX tab page in infoobject maintenance. Are you filling up the text in the default (short Text) or are you filling up some other length.
Check the filter display box on this tab as well to see if you have the appropriate selection. Try changin it to see what happens.
Message was edited by:
A S

SQ01 - How to associate existing query with another infoset ?

Hello,
I created an infoset and want to associate it with an existing query.
-> I tried to change the existing query but it is blocked for changes by the user author.
-> I tried to copy the existing query to a new query but the infoset was copied automatically
Is it possible to do this?
Alex,

Hello, a query is built upon the infoset, it gets data from the infoset structure and display them in the way you have defined in the query, if you change the infoset that is below a query you might not have all the data you need in the query.
Why not create a new query based on the othe infoset?
Regards, Luciano.

How to find the query name using infoset name

Hi Experts
       Iam new to the sap queries(SQ01,SQ02), some queries already created.
      now i want to do some modification, my problem is i am not able to find the query name.
      I know the infoset name, can you tell me how to find the query name using the infoset name, is ther any table for this.
i tried in sq01 also, but its confusion, pls advice me on this.
thanks in advance.
regards
rajaram

Hi
try like this..
SQ02 --> go to --> Query Directory..
from there you can get all the queries belong to a Infoset.

How to Broadcast Control Query based on User Exit Variable

Hi Gurus,
How to Broadcast dashboard based on Control Query based on User Exit
Variable to different users via mail in BW 3.5 version. Any document or
steps to achieve this will be very helpful.
Regards
Vishwanath

Hi Surendra,
Thanks for the reply and your suggestion. It will be great if you can help me to answer the below:
1) What exactly we mean by Control Query - Any example will be very helpful
2) As you mentioned, yes the user exist to be written will be for user-exit variable for dynamic period selection - An Example on how to create this will be helpful
3) Once the above variable is created, what are the steps to include this variable in the Bex Query?
4) Once all the queries to be used in dashboard are implemented with the exit variable, how to create a variant to be used in Broadcasting?
5) How and where to configure the email recipients (to whom this dashboard will be sent via mail)?
6) How to set up the BW broadcaster in BW 3.5 using the control query ?( My question is though we have to send the dashboard to the users, which has multiple queries, how a single control query with variant will help us).
Awaiting your reply.
Thanks and Regards
Vishwanath

Keyfigure values are incorrect in BEx Query based on infoset

Hi Experts,
I have created a infoset using 3 DSO's . 1 main DSO( from which i rquire all the data) is linked with other 2 DSO's using left outer join. DSO is linked with other 2 DSO's with a field return GUID .
Now when i am executing a query , key figure values are coming incorrectly because suppose if there is 1 record related to
RETURN GUID in main DSO and there are 4 reords in 2nd DSO with the same RETURN GUID then in infoset data 4 rows are getting created with the replication of all the fields from first DSO against those 4 rows. So in query result amount field is getting 4 times of its original value because of aggregation of all those 4 rows.
I don't have set of key fields by which i can link the all the DSO's to get unique linking of records.
How can i get the amount only one time in query result?
Hope i am clear.
Please help. I need to create report urgently.
Regards,
Ajay

Hi Ajay:
Please take a look at the blog series provided by Sunmit Bhandari.
Infoset Keyfigure multiplicity Part 1
/people/sunmit.bhandari/blog/2009/04/14/infoset-keyfigure-multiplicity-part-1
Infoset Keyfigure multiplicity Part 2
/people/sunmit.bhandari/blog/2009/04/14/infoset-keyfigure-multiplicity-part-2
Infoset Keyfigure multiplicity Part 3
/people/sunmit.bhandari/blog/2009/04/14/infoset-keyfigure-multiplicity-part-3
Regards,
Francisco Milán.

SAP ABAP query based on Infosets

Hi All,
   We have requirement where in we will be joining 7 tables in Infoset . Dataset1
   We have another 3 tables to be joined separately . Dataset2.
   We need to compare the dataset 1 with dataset 2 and show the final data in output .
   How can we achieve this in SAP query . If anyone has worked on this type of requirement .
   Let me know ,
Thanks in Advance,
USR

I believe that you can only use one infoset per query. To do any comparison, you'd need to build two separate queries and then compare the results in Excel, for example. 7 tables seems rather extreme to me though...

How to modify search query based on new FE

Hi,
As per a requirement, in All Accounts search (advanced search section), I had to replace 5 checkboxes (e.g. Role1, Role2, Role3, Role4, Role5) by a single dropdown (codelist) name= "Account_Roles" containing same values (Role1, Role2, Role3, Role4, Role5). I created Customer's XBO and declared field of the codelist type, name= "Account_Roles". So, the XBO now has below 6 fields :
Role1, Role2, Role3, Role4, Role5 (type = Indicator)
Account_Roles (type = codelist)
Existing search on All Accounts worked on the 5 checboxes and fetched those accounts for which the values matched.
E.g.
If in search parameters, I check Role1 & Role2, and for Account1, these values are stored as "true", then Account1 will be shown in the result list.
Now the search UI doesn't have the checkboxes, but codelist ('Account_Roles') which can have value 'Role1'/'Role2'/'Role3'/'Role4'/'Role5' or combinations are also possible like 'Role1' OR 'Role2', etc..
My question here is -
Will the old search query that worked on indicator fields earlier, handle the new FE "Account_Roles" automatically ?
If not, then will modification be required to existing search query ?
If modification is required, what steps I need to follow to handle this new field instead of checkboxes.
I need exact steps to modify a search query, as I tried several things in the PDI but was not able to confirm if this requirement can be implemented by modifying search query or it is not feasible from PDI perspective.
Appreciate all your inputs.
Thanks,
Sachin.

Hi,
you can create a link between the vendor objects itself, means link 0vendor with 0ven_compc and 0ven_purorg. This should give you a list of all vendors multiplied with the comp codes multiplied with the purch. org. May be here it is possible to create another link between a attribute (eg. comp_code of 0ven_purorg with comp_code of 0ven_compc). In case it is not possible you need to add this link information somehow. Another option might be to create 2 queries. One on a infoset of 0vendor and 0ven_purorg and another one on 0vendor and 0ven_compc.
regards
Siggi

How to create collection (query) based on report results?

Hello everyone,
I have the following report;
I would like to create a collection based on the "Non Compliant" and the "Unable to find compatible TPM" so I can re-deploy with right-click tools.
If the above is NOT the solution to create a group for redeployment. How would I address this?
Thank you in advance for any help.

Unfortunately, there is no straight-forward answer here. ConfigMgr console queries use WQL and only have visibility to a subset of the complete information in the database. Most things you are probably interested in creating queries from are probably visible,
but that's not guaranteed. Additionally, they are named slightly differently also so it really just takes some trial and error and personal investigation to see what is there and what isn't. The place to start is to open the root\sms\site_<sitecode>namespace
on the system hosting the SMS provider. The public reference for most of the classes is at
http://msdn.microsoft.com/en-us/library/hh948405.aspx . These all directly map to data in the database but as mentioned, not all views in the DB have a corresponding WMI class.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to increase the salary based on the percentage value

Hi All,
Could you please let me know which API need to be used to implement the hike in salary based on the percentage value. And what all the parameters to be used.
Appreciate your help...
Thanks...

Dear All,
Any luck on this please?
thanks..

BEx based on infoset

HI Gurus,
I created Query based on infoset.
later, i added some fields in ODS then adjusted Infoset at T-Code RSISET.
i can see that new field here and values also coming on it.
but when i am editing Query, i am not able to see that new field.
Plz provide your inputs.

SSMS,
after you change the infoset - log off and log into BeX again -... also refresh the Infoprovider window - using the refresh button at the top...
Arun

SELECT QUERY BASED ON SECONDARY INDEX

Hi all,
CAN ANYONE TELL ME HOW TO WRITE SELECT QUERY BASED ON SECONDARY INDEX.
IN WHAT WAY DOES IT IMPROVE PERFORMANCE.
i KNOW WHEN CREATING SECONDARY INDEX I NEED TO GIVE AN INDEX NO -iT SHOULD BE ANY NUMBER RIGHT?
I HAVE TO LIST ALL PRIMARY KEYS FIRST AND THEN THE FIELD FOR WHICH I AM CREATING SECONDARY INDEX RIGHT?
LETS SAY I HAVE 2 PRIMARY KEYS AND I WANT TO CREATE SEONDARY INDEX FOR 2 FIELDS THEN
I NEED TO CREATE A SEPERTE SECONDARY INDEX FOR EACH ONE OF THOSE FIELDS OR ONE SHOULD BE ENOUGH
pLS LET ME KNOW IF IAM WRONG

HI,
If you cannot use the primary index to determine the result set because, for example, none of the primary index fields occur in the WHERE or HAVINGclauses, the system searches through the entire table (full table scan). For this case, you can create secondary indexes, which can restrict the number of table entries searched to form the result set.
You create secondary indexes using the ABAP Dictionary. There you can create its columns and define it as UNIQUE. However, you should not create secondary indexes to cover all possible combinations of fields.
Only create one if you select data by fields that are not contained in another index, and the performance is very poor. Furthermore, you should only create secondary indexes for database tables from which you mainly read, since indexes have to be updated each time the database table is changed. As a rule, secondary indexes should not contain more than four fields, and you should not have more than five indexes for a single database table.
What to Keep in Mind for Secondary Indexes:
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb2d446011d189700000e8322d00/content.htm
http://www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
Regards
Sudheer

How to increase performanceof query based on Infoset?

Similar Messages

Maybe you are looking for