How to increase processor focus for rendering?

Hi Folks,
I posted this is another thread, but it was kind of hijacking so I"m reposting a new one:
Issue: my MacPro 2.66 (latest rev of Tiger) seems to take longer than I would think to render, plus I checked the istat pro widget and only 93% of the processing is focused on the render. FCP (version: 5.1.4) is the only app open. I have 3.5 GB ram, although i understand that rendering is only processing based.
I cut my sequence (1.5 hour home movie transfer); edited the audio (needed pan adjusted) and
then rendered before outputting a QT reference file (not closed).
The render takes approximately 30 minutes and then the ref file takes 23'ish minutes. What boggles me mind is that unedited sequences of the same duration do not take as long to create the ref file. I could understand the duration if I hadn't rendered already, but I'm finding this weird no?
So, here's my question is twofold:
1. why does it take so long after the render to create the ref file? The reason why I used a ref file is b/c i use bitvice to encode the mpeg2 files.
2. is there a setting in FCP to dedicate more of the processing power? I seem to have all the settings in FCP to use 100% of the processors from what i can tell.
Cheers
Keebler

thanks Jerry.
To clarify, I'm actually using the Mp 2.66 in this situation.
The G4 has been semi-retired
Wrt rendering, I always render 'all' so theoretically, the files should be good to go without the ref file rendering anything, as you mentioned.
Too bad about the setting. I might contact Apple on this one. I find it weird that you can't tell the macpro to work harder on 1 process. you'd think it would go all out to work on a process, if that's the only process going. I know there are other minor continuos processes happening, but in terms of being a work horse, i fail to understand why it's 93% idle Maybe I just don't understand something about how computers work?
Cheers,
Keebler

Similar Messages

How to increase page size for balance file upload in Workspace.

Hi All,
Please suggest how to increase page size for balance file upload in shared Workspace pages.
Thanks,

A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

How to increase the time for detect a device down on Prime 2.0

Hi,
I would like to know how to increase the time for detect when a device has lost connection, currently I monitor several stand alone Access Points that are paleced on differents locations connected to prime through 256 Mbps Links, so when the location has very high bandwith utilization, an e-mail notification about the unreachable Access Point is sent, but if we check te reachability, the Access Point is reachable, and we don´t want to receive to many of this notificatios,
thanks for your help

Go to the Console, Select the server --> configuration --> tuning tab,
Stuck Thread Max Time and Stuck Thread Timer Interval (give your required time)
This will definitely increase the Stuck Thread time interval.
or
by using work manager also you can define Stuck Thread Max Time interval by editing deployment descriptor file
<work-manager>
<name>wm_name</name>
<max-stuck-thread-time>30</max-stuck-thread-time>
<stuck-thread-count>5</stuck-thread-count>
</work-manager>

How to increase the memory for my weblogic server in Jdeveloper 12.1.2.0.0 ?

Hey everyone,
So as my title says, i'm trying to increase the memory for my weblogic server in my windows 7 64 bit machine, with 8GB ram.
The values appear to be: JAVA Memory arguments: -Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m
I've done some search from this forum and i've added this to my jdev.conf:
AddVMOption -XX:MaxPermSize=1536M (in this one i've only changed the value)
AddVMOption -Xmx1536M
AddVMOption -Xms1536M
And i've changed this: MEM_ARGS="-Xms1024m -Xmx1024m" in my startNodeManager.sh file
I'm still getting the same line in my server but i need to change the values since i'm not getting the server to run my application very well (it gets stucked in loading my databases and graphs) and i think it will continue untill i get a heap exception error.
Any ideas of how to change this?
Regards,
Frederico.

Thanks Alejandro .
I'm going to ask you another question and this one is quite important.
Whenever i run my project a couple of times, i'm not able to retrieve the page, it just gets stuck on loading.
It just stops the loading, like its a really really slow page. I'm not using a lot of rows in my database so i don't take to much memory but it doesn't load and i know everything is fine but i just added some graphs after testing it.
Do you know why?
In the console it says that everything is fine and shows the link for the page but it never loads completely until it gives a error because it does not respond in 600 seconds.
Strange right?

How to increase memory allowed for an application

Before in OS 9 and below we can expand the quantity of memory for an application, we can't do same in OS X.
OS X is able to set himself the amount of memory for an application. This seems to work but I think there is a limit sets by OS X.
My question is how to increase this amount of memory ?
I tried to increase it in terminal using "ulimit -d unlimited" but this is not working enough.
I use to do calculation with matrix systems and iterations in Mapple software but on my iMac with 4 GB of RAM memory, when application reaches 450 MB, I get a memory error message. Activity monitor at same time says there is more than 2 GB free !
Has somebody a solution to free this limit, even for a small time or for only an application ?
Thanks for your help.

The full message is :
"Kernel connection has been lost. The kernel returned the following message :
Execution stopped : Memory allocation failed.
Please sea ?alloc for more detail.
You should save this worksheet and restart Maple
Executing commands in Mapple requires a connection to the Maple kernel.
Firewalls have been known to cause problems with kernel connections in Maple. Please ensure that any firewall software is configured to allow Maple to create connections to the kernel. Consul the FAQ for more information."
I checked the firewalls of OS X, they are shutdown and no restrictions seems to be set for processes.
We are expecting for a new version of Maple with some modifications due to Snow.

How to increase max thread for SOAP adapter ?

Hi PI Expert,
I have problem with Synchronous SOAP transaction in PI 7.0 EHP1 SPS2. The interface actually using ccBPM.
IDOC ---> ccBPM -
> synchronous call to SOAP adapter.
The problem is there are always timeout call from Integration server to SOAP adapter after several transaction success.
it seems like the soap adapter is doesn't has enough thread to receive call from IS.
the pattern is like success, success, failed, success, success, failed. it always 1 errror within 1 minutes for 4-5 transaction in the same minutes.
is that any log in adapter that i can check or how to increase soap adapter thread ?
Please advise ?
Best Regards
Fernand

Hi Fernand,
please check this blog:
Adapter Specific Queues in PI
/people/sunil.singh13/blog/2009/03/30/adapter-specific-queues-in-pi
Regards,
Gábor

How to Increase Instance size for ALBPM-Err:'Max instance size exceeded.

HI,
Can anybody in How to increase maximum instance size for
1. ALBPM Studio
2. runtime i.e. process administrator?
Look forward for help.
Cheers
The exception in detail is:
Error while persisting the transaction data: 'Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0''
Details:
Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0'
fuego.server.exception.MaxInstanceSizeRuntimeException: Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0' at fuego.server.ProcInst.getComponentData(ProcInst.java:792) at fuego.server.ProcInst.mustStoreComponent(ProcInst.java:2777) at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.executeUpdateInstance(JdbcProcessInstancePersMgr.java:2870) at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.updateInstance(JdbcProcessInstancePersMgr.java:2272) at fuego.server.persistence.Persistence.updateProcessInstance(Persistence.java:1008) at fuego.server.execution.EngineExecutionContext.persistInstances(EngineExecutionContext.java:1819) at fuego.server.execution.EngineExecutionContext.persist(EngineExecutionContext.java:1109) at fuego.transaction.TransactionAction.beforeCompletion(TransactionAction.java:132) at fuego.connector.ConnectorTransaction.beforeCompletion(ConnectorTransaction.java:685) at fuego.connector.ConnectorTransaction.commit(ConnectorTransaction.java:368) at fuego.transaction.TransactionAction.commit(TransactionAction.java:302) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:481) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:63) at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42) at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:264) at fuego.server.execution.ToDoItem.run(ToDoItem.java:559) at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:773) at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753) at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142) at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134) at fuego.fengine.ToDoQueueThread$PrincipalWrapper.processBatch(ToDoQueueThread.java:446) at fuego.component.ExecutionThread.work(ExecutionThread.java:837) at fuego.component.ExecutionThread.run(ExecutionThread.java:408)

First take a look at your instance variables in your processes. Determine if some could be changed to be Separated instance variables. Once an instance variable's category changes from "Normal" to "Separated", it is not included in the instance size calculation.
If you cannot mark variables as Separated, then in Studio's "Project Navigator" tab, right mouse click the name of your project -> click "Engine Preferences" -> with the "Engine" selected as the Category, click the "Advanced" tab on the upper right change the "Maximum Instance Size" to 64KB (4x the original 15kb value) and change the "Instances Cache" to 1250 (1/4th the original value).
What version of Enterprise are you on (Standalone or WLS)? There is a similar setting on Enterprise, but it is slightly different between the two types of Enterprise Engines.
Dan

How to increase the time for threadstuck jdeveloper weblogic server

Hi,
This is a requirement for increasing the time for threastuck detection in jdeveloper weblogic server.
Few of my threads take a longer time than the default value for threastuck detection.
Could you please share the suggestions on how to do it?
i have tried by creating workmanager from the administration console but not aware of how to apply it to application(in web.xml).
Share inputs on this.
Thanks,
Devender

You are posting this on the wrong forum. All this in one of the server forums.
Timo

How to increase log level for SUNW.oracle_listener resource type

I understand that i can increase logging level for a resource with "clrs set -p "Debug_level=$LEVEL", but the SUNW.oracle_listener resource type doesn't seem to have this property. Is there some other way of increasing log data to debug an issue with a listener resource? I ask because we have a strange situation where our database listener is being restarted every once in a while. With the log data I have, it appears that the listener is being stopped or dies, and then the monitor restarts it when it detects the fault, however our DBA's believe that it is the cluster that is actually the one cycling it because the monitor fails or is unable to connect because it is too busy to respond in time or something along those lines.
Maybe I am incorrect and it is the cluster, but I'd expect to see something before a "Attempting to restart listener" log entry, something along the lines of the monitor failing or a "no response in given time" before the resource says it is restarting.
Here are the logs from when this first happens, if anyone can advise, I would really appreciate it.
Sep 28 14:17:48 SC[SUNWscor.oracle_listener.monitor]:oracle:oraclels: Attempting to restart listener oracle.
Sep 28 14:17:50 SC[SUNWscor.oracle_listener.monitor_stop]:oracle:oraclels: Stopping fault monitor using pmfadm tag ORALSNR_MON_oraclels
Sep 28 14:17:52 SC[SUNWscor.oracle_listener.stop]:oracle:oraclels: Stopping listener oracle.
Sep 28 14:17:52 SC[SUNWscor.oracle_listener.stop]:oracle:oraclels: Using method 'run_setuid_prog' to execute shutdown commands
Sep 28 14:18:00 SC[SUNWscor.oracle_listener.stop]:oracle:oraclels: Listener oracle stopped successfully
Sep 28 14:18:02 SC[SUNWscor.oracle_listener.start]:oracle:oraclels: Starting listener oracle.
Sep 28 14:18:02 SC[SUNWscor.oracle_listener.start]:oracle:oraclels: Using method 'run_setuid_prog' to execute start commands
Sep 28 14:18:06 SC[SUNWscor.oracle_listener.start]:oracle:oraclels: Listener oracle started.
Sep 28 14:18:08 SC[SUNWscor.oracle_listener.monitor_start]:oracle:oraclels: Starting monitor

Thanks for the reply Thorsten. The logs I included in the original post are actually from /var/opt/SUNWscor/oracle_listener/messages_log.$RESOURCE. I'd like to bump up the verbosity on the oracle_listener logs like I can with the oracle_server logs, but for whatever reason there is no debug_level parameter for the oracle_listener resource type. Sounds like I may be SOL, but thought I'd check with the forum and verify.

Increase processor priority for Logic 8

I saw an interesting thread on the Final Cut Pro forum - where the users were concerned that rendering did not fully use all of their cores.
This might be of use to heavy Logic users?
http://discussions.apple.com/thread.jspa?threadID=819587&tstart=0
Is your Processor Performance set to "Highest" in your Energy Saver preferences?
To increase the priority of a process in Mac OS X, open the Activity Monitor in the /Applications/Utilities/ folder and get the process's pid. From here, open the Terminal, which is also in the Utilities folder, and enter the following:
sudo renice -20 pid
where pid is the number you found earlier. Press Enter and type in your password; nothing will appear in the window while it is being typed. The process in question will now run as fast as the computer can make it go. The effect of this command ends when the program quits.
-20 refers to the "nice" level of the process. UNIX operating systems have what is called a scheduler, a part of the kernel that decides when tasks run and for how long before CPU time is allocated to another task.
Processes with higher "nice" levels are nicer -- meaning that they get a smaller share of the processor time. Processes with a lower nice value are less "nice". Nice values range from -20 to +19. Basically, it's a hint to the kernel's scheduler that schedules processes to run about how aggressive it should allow a process be in using up processor time. It's conceptually distinct from the concept of "priority" which enters into the process scheduling a little differently.
You can do this automatically by opening the Script Editor in the /Applications/AppleScript/ folder and pasting in the following:
tell application "Final Cut Pro"
run
end tell
set the_lines to paragraphs of (do shell script "ps -U $USER")
set the_app to "Final Cut Pro"
set the_line to ""
repeat with this_line in the_lines
if this_line contains the_app then
set the_line to this_line
end if
end repeat
if the_line is "" then return
set the_pid to word 1 of the_line
do shell script "renice -20 " & the_pid password "yourpass" with administrator privileges
Provide your administrator password in the last line, and save the script as an application in a location easy to access. Open it whenever you want to open Final Cut Pro. More information about the command, including the purpose of the -20, is available in this article.
http://developer.apple.com/documentation/Darwin/Reference/ManPages/man8/renice.8 .html

Here is an application which allows just that:
NICER
http://www.versiontracker.com/dyn/moreinfo/macosx/9473
Nicer 2.1b ©2001 Ryan Stevens
This is a beta (preview) release. Use at your own risk. If you have comments, questions or feature requests drop me a line (see the Contact section).
Know bugs:
1) Application names get clipped at 16 characters. Until I figure out a sensible way to get the full names (without mass amounts of guesswork/workaround code) this will have to do, sorry! If you have a fix you'll let me know, right!?
2) Choosing "Quit [appName]" from the context menu doesn't let you save changes (if any) in the quitting app. (This may change in next release)
3) Choosing "Kill [appName]" or "Quit [appName]" from the context menu doesn't show an alert with the option to cancel. Select one and the app will quit -- unless the process doesn't belong to you, in which case you will have a chance to cancel.
4) Although not exactly a bug, Nicer doesn't gather much meaningful info on the process. I like the simple look so if/when we gather more info it may get put into an Inspector window.
5) [insert quirk/bug/missing feature here.]
Installation:
Drag n Drop install/uninstall. I recommend putting Nicer in /Applications/Utilities/ but it's really up to you.
License:
Nicer is freeware. Bam! Simple as that.

How to increase Processor Speed

I have a iMac Intel Core Duo 17'' and it has 512 MB RAM, and the BUS Speed is 667Mhz. I recently bought an M-Box from Digidesign which is for music, and when i plugged it in, it said there wasn't enough power to run the mbox. I looked at the specs and it says that i must have a G4 Processor with 933 Mhz or higher and Mac OsS X Version 10.3.9 or 10.4. I want to know how i can increase my computer to run this product and how much it would cost. Can you people please help me?

If you mean that an error was displayed on your screen saying that there was not enough power, then where did you plug this device in?
Did you plug it directly into the USB ports on the back of your computer?
The USB ports on the keyboard and on the back of other devices are usually provide less electrical power.
If you are getting this error message even when it is plugged-into the USB ports on the back of your computer (directly into those ports), then you may need to see if there is a power adapter for your M-Box.
It may come with it's own power supply, or require you to purchase one. If so, that power supply would plug directly into the M-Box.
As for the specifications / system requirements, you already exceed what is printed on the box.
But, you are running an Intel system. So, you'll want to make sure that the software and device are able to work with an Intel Mac. The specifications you list are assuming that you are using an older PowerPC Mac (the previous generation of processors).
Most PowerPC software will run properly on an Intel Mac. But, some programs and devices do not.
I don't see a device listed as M-Box listed as one of their current products. So, I didn't see exactly what you are working with or trying to get working.
But, you should check to make sure that it is compatible with the newer Intel-based Macs.
I hope this helps.

How to Increase Time-out for Agent Manager in OLT?

Hello All,
When using the Oracle Load Testing Agent Manager for a load test of multiple scripts, I often get time-outs at the start of a test from OLT:
"Error communicating with.... : timed out after 60 seconds".
When I check the agentmanager.log file on the remote PC (Win XP SP2) I can see that the communcation started with the last line saying
"connected to server=......yaddayadda.... queue=queue/AgentPoolNotificationQueue"
which I assume means there was communication. And there were 2 attempts to start. After the first attempt, the entry:
05:31:09,513 WARN [AgentProcess] Forcibly terminating process 8041484 for agent agId1530_rndd49ae6b9-a8ec-4a0d-920d-16ee6c7021f4
The agentmanager_auth.log file show 2 lines near the start time of the test:
2010-05-12 05:30:18,606 INFO [URL:t3://..........au:8088;Requestor Username: oats;Requestor Key:f6272e33-9428-425b-b52d-c0363f863e43;Requestor Queue:queue/AgentPoolNotificationQueue;Request ID:36;Request:startagent;] - authentication successful
2010-05-12 05:31:09,513 INFO [URL:t3://..........au:8088;Requestor Username: oats;Requestor Key:f6272e33-9428-425b-b52d-c0363f863e43;Requestor Queue:queue/AgentPoolNotificationQueue;Request ID:42;Request:stopagent;] - authentication successful
Why was there a 'stopagent'?
The log from a successful agent show lines after the "Connected to server...." line ( "startAgent( pathTo.....a.. Launching agent.... Launched process 8792944 for agaent agId.....") so something appears to have not happened on the failed agents.
When starting a test immediately (rather than scheduling it as I want to for off-peak times) and the agents time out, I can stop it & restart test. Usually then they all start successfully.
Does anyone have any suggestions on failure reasons & possible solutions?
If there's nothing else that I might have missed, I'd like to trying increasing the time-out to say 120 or 500 seconds.
How can I do this?
Is there a way to get the agents to try starting again, or add a new vUser/script instance one the test is running?
Many thanks,
Neil
Edited by: Neil S on May 12, 2010 9:16 AM

Hi Ramesh,
I guess you need to increase the parameter "icm/keep_alive_timeout" value, it's default value is 60. please gothrough the link
http://help.sap.com/saphelp_webas630/helpdata/en/0b/1c7e7abbc311d5993a00508b6b8b11/content.htm
To increase this go to RZ10 and add this parameter in Instance profile and modify the value then restart the server to make the changes effective.
Regards,
Hari
PS: Point's are welcome

How to increase storage capacity for STAT logs

Hi all ,
We are taking logs using the command STAT for observing users activities.(Here we can find the users activities only for 3 days).
1. I want to store one month period STAT logs ? how can and where can I change the memory settings to change the storage capacity?
(like to increase system log size we can edit rslg/store----- parameter. Like this way where can I change the settings to store one month period STAT logs)
Please kindly help on this.
Regards,
nani

I don´t think it´s possible.
Storing everything for one month will, depending on user activity, produce a HUGE amount of data you won´t be able to evaluate, just because of its size.
What do you want to achieve with that?
Markus

How to increase wifi strength for iPad Air

How can I increase wifi strength to iPad from public wifi

Not all will apple to public wifi.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to increase cpu time for a job

We have a application which submits a scheduler job. The job parses a blob and inserts rows into a table. It was running slow . On checking the scheduler tables I found out for actual time of 2 hours the job is taking cpu time of less than 2 minutes.
Can anybody help us with any idea to increase the CPU utilization by around 4 times so the job finishes in 30 minutes
Thanks
Saikat

Hi,
How long does it take when you run the same action that the job is running from sqlplus ?
This looks like more of an Oracle tuning question than a Scheduler question. You might get better answers if you gave more info about the pl/sql code being run and posted this to the general pl/sql forum here
PL/SQL
You can also try general PL/SQL profiling tools to see what statements in your code are taking the longest while to run e.g. AWR and ADDM if you have licenses for them.
Hope this helps,
Ravi.

How to increase processor focus for rendering?

Similar Messages

Maybe you are looking for