How to increase screen resolution in Vista under boot camp?

I have installed Vista Home Premium under boot camp (OS X 10.5.7) but in preferences I can only get the maximum of 1280x960 while my screen resolution on SyncMaster P2250 in OS X is 1920x1080.
(I am using new Mac mini with NVIDIA GeForce 9400).
I have inserted Leopard disc in Vista and installed boot camp but still I can't make the resolution higher.

OK everything works fine! The problem was that after installation of Vista I was inserting old Leopard disc that I bought a year ago instead of inserting the Mac OS X installation disc that I got with new Mac mnini.
When I put the Mac OS X that was toghether with new Mac mini it installed missing driver and everything started working

Similar Messages

Why two QuickTimes with Apple Software Update in Vista under Boot Camp?

Running Apple software update in BootCamped Vista, I see selection for 1) QuickTime, 2) Safari, 3) iTunes & QuickTime.
Items 1) and 3) are by default checked for download. Why would I want to download QuickTime twice??

Hi!
Funny you should mention that! Same thing happened to me yesterday, I was downloading Boot camp 2.1 and there were the other three downloads you mentioned. I downloaded them anyway. I now have Safari 3.2.1 (etc.) on my Windows partition. Why did I do that ? To be frank I do not know!! Now you have all three on the Windows partition.

How to increase screen resolution Solaris 10

Hi,
Just installed S10..The monitor that I am using runs pretty high resolution but the highest option that I can choose is 1024x768...What is the easiest way to increase the selections?
Also where would I look to find audio drivers for this box? The speaker has a red line going through it...Speaker works fine with latest dev build of opensolaris, though...Thanks.

If you are mirroring the displays they will have the same resolution, if you are extending the displays you can have different resolutions for each display.

Has ANYONE managed to install Vista under Boot Camp on a second drive?

As I understand it Vista cannot be installed on secondary drive because of the "Windows is unable to find a system volume that meets its criteria for install" error message when selecting the install location because it needs a Primary Drive.
In the Microsoft Knowledge Base they recommend removing the primary drive to overcome this but I tried and it failed.
Do I HAVE to go out and buy XP (which allows installs on secondary drives) and then upgrade to Vista.
I'm so darn frustrated with this issue I wondered if anyone has managed to do this successfully.
Thanks
Aln

No problems here. I have Vista 64 Ultimate running on a different internal drive, and I didnt remove my primary OSX drive to do this. In fact it worked without a hitch. There must be something you are doing wrong in the bootcamp preparation phase.

Can't uninstall or re-install Vista drivers (Boot Camp 2.1)

I'm having problems with my MacBook Pro's bluetooth support in Vista under Boot Camp so I thought I'd try to re-install the Boot Camp 2.1 drivers. However, whenever I run the setup program, it just gives me a useless error message saying it encountered an error before it could start the install, and to please try again later. Rebooting doesn't help.
So I thought maybe I could uninstall all the Apple stuff then start again. But when I try to uninstall "Boot Camp services" from the programs and features control panel, it starts to uninstall, but then gives up silently as it nears the completion of the "gathering information" dialog.
So I can't uninstall or re-install this thing. Anyone know how I can fix this?
Thanks!

Ric - wrote:
I'm having problems with my MacBook Pro's bluetooth support in Vista under Boot Camp so I thought I'd try to re-install the Boot Camp 2.1 drivers. However, whenever I run the setup program, it just gives me a useless error message saying it encountered an error before it could start the install, and to please try again later. Rebooting doesn't help.
So I thought maybe I could uninstall all the Apple stuff then start again. But when I try to uninstall "Boot Camp services" from the programs and features control panel, it starts to uninstall, but then gives up silently as it nears the completion of the "gathering information" dialog.
So I can't uninstall or re-install this thing. Anyone know how I can fix this?
Thanks!
It may be too late, but have you tried going into the drivers using Vista's control panel and either removing the drivers or reverting to precious drivers?

How to handle screen resolution in bdc session method.

hi all,
how to handle screen resolution in bdc session method.

Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel.

How to do screen resolution in session method

hi guru how to do screen resolution in session method.
please tell me.
regards
subhasis

Sometime back this is refered in SDN :
Check table CTU_PARAMS and field DEFSIZE for setting fixed line of table control.
CALL TRANSACTION 'VA01' USING it_bdcdata
OPTIONS FROM OPT
MESSAGES INTO it_mesg.
opt of type ctu_params.
WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
WA_CTU_PARAMS-UPDMODE = 'S'. "synchronus update
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
Default size will play good role in terms of resoultion. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resoultion. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
Thanks!!

How to handle screen resolution in session method

how to handle screen resolution in session method without bdc_insert .

Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel.

How to create screen resolution in bdc table control

hi gurus
can anyone suggest me
how to create screen resolution in bdc table control
thanks&regards
mark.

Hi ,
Using CTU_PARAMS table for screen resolution .
For this sample code.
This is for Transation FB60.
report ZZFB60
       no standard page heading line-size 255.
tables t100.
PARAMETERS : p_file1 like rlgrap-filename,
             p_doctyp like RF05A-BUSCS,
             p_invdat like INVFO-BLDAT,
             p_posdat like INVFO-BUDAT.
CONSTANTS : C_TRANS_FB60(4) VALUE 'FB60'.
*Parameter string for runtime of CALL TRANSACTION
data : l_option type ctu_params,
       l_subrc type sysubrc.
DATA : l_mstring(150).
data      accnt type char17.
data       : day   type char2,
             month type char2,
             year type char4,
             date1 type char10,
             date2 type char10.
data      : cnt(2) TYPE n,
             cnt1 type i,
             fld(25) TYPE c.
data : begin of excel occurs 0,
        fieldname(255) type c,
       end of excel.
DATA:BEGIN OF it_mess OCCURS 0,
         msgtyp(5),
         lms(200),
          msgv1(50),
     END OF it_mess.
data: begin of t_record occurs 0,
         BUKRS(004),
        ACCNT(017),
        XBLNR(016),
        WRBTR1(016),
        WAERS(005),
        SECCO(004) ,
        SGTXT(050),
        HKONT(010),
        WRBTR2(017),
        MWSKZ(002),
        GSBER(004),
        KOSTL(010),
     end of t_record.
*Internal Table for Header Data
DATA : BEGIN OF t_head OCCURS 0,
        BUKRS(004),      "Company Code
        ACCNT(017),      "Account or Vendor
        XBLNR(016),      "Reference
        WRBTR1(017),     "Amount in document currency
        WAERS(005),      "Currency
        SECCO(004),      "Section Code
        SGTXT(050),      "Text
        END OF t_head.
*Internal table for Item Data
DATA : BEGIN OF t_item OCCURS 0,
        ACCNT(017),      "Account
        HKONT(010),     "GL Account
        WRBTR2(017),    "Line item Amount in document currency
        MWSKZ(002),     "Tax Code
        GSBER(004),     " Business Area
        KOSTL(010),     "Cost centre
        END OF t_item.
DATA: IT_BDCDATA      LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
      IT_BDC_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
start-of-selection.
l_option-defsize = 'X'.
l_option-dismode = 'A'.
l_option-updmode = 'S'.
day = p_invdat+6(2).
month = p_invdat+4(2).
year = p_invdat+0(4).
concatenate day month year into date1 SEPARATED BY '.'.
day = p_posdat+6(2).
month = p_posdat+4(2).
year = p_posdat+0(4).
concatenate day month year into date2 SEPARATED BY '.'.
*perform open_group.
loop at t_head.
CLEAR    IT_BDCDATA.
REFRESH IT_BDCDATA.
perform bdc_dynpro      using   'SAPLACHD'         '1000'.
perform bdc_field       using   'BDC_OKCODE'        '=ENTR'.
perform bdc_field       using   'BKPF-BUKRS'        t_head-bukrs.
perform bdc_dynpro      using   'SAPMF05A'          '1100'.
perform bdc_field       using   'BDC_OKCODE'        '/00'.
perform bdc_field       using   'RF05A-BUSCS'       p_doctyp.
perform bdc_field       using   'INVFO-ACCNT'       t_head-accnt.
perform bdc_field       using   'INVFO-BLDAT'       date1.
perform bdc_field       using   'INVFO-BUDAT'       date2.
perform bdc_field       using   'INVFO-XBLNR'       t_head-xblnr.
perform bdc_field       using   'INVFO-WRBTR'       t_head-wrbtr1.
perform bdc_field       using   'INVFO-WAERS'       t_head-waers.
perform bdc_field       using   'INVFO-SECCO'       t_head-secco.
perform bdc_field       using   'INVFO-SGTXT'       t_head-sgtxt.
cnt = 1.
cnt1 = 1.
loop at t_item where accnt = t_head-accnt.
*if cnt > 4.
*cnt = 4.
*endif.
if cnt1 gt 1.
CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
perform bdc_field      using   fld                   'X'.
perform bdc_dynpro      using 'SAPMF05A'          '1100'.
perform bdc_field       using 'BDC_OKCODE'        '=0005'.
endif.
perform bdc_dynpro      using 'SAPMF05A'          '1100'.
perform bdc_field       using   'BDC_OKCODE'        '/00'.
CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-hkont.
CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
perform bdc_field using       fld                t_item-wrbtr2.
CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-mwskz.
CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-gsber.
CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-kostl.
perform bdc_field      using 'BDC_CURSOR' fld.
*CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
*perform bdc_field      using   fld                   'X'.
cnt1 = cnt1 + 1.
*cnt = cnt + 1.
*if cnt > 1.
*perform bdc_dynpro      using 'SAPMF05A'          '1100'.
*perform bdc_field       using 'BDC_OKCODE'        '=0005'.
**perform bdc_field       using 'BDC_OKCODE'        '=0006'.
*endif.
endloop.
perform bdc_dynpro      using 'SAPMF05A' '1100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BS'.
perform bdc_dynpro      using 'SAPMSSY0' '0120'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
*perform bdc_transaction using 'FB60'.
CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA options from l_option
                             MESSAGES INTO IT_BDC_MESSAGES.
perform error.
perform errordownload.
endloop.
*perform close_group.
*Form data_upload
FORM data_upload .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME              = p_file1
   FILETYPE              = 'DAT'
TABLES
    DATA_TAB             = t_record.
ENDFORM.                    " data_upload
*Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = 'p_file1'
    IMPORTING
      file_name     = p_file1.
ENDFORM.                    " file_selection
Form BDC_DYNPRO
FORM BDC_DYNPRO using program dynpro.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
endform.
*Form BDC_FIELD
FORM bdc_field using fnam fval.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Table Control
FORM table_control .
LOOP AT t_record.
    ON CHANGE OF t_record-accnt.
      MOVE-CORRESPONDING t_record TO t_head.
      APPEND t_head.
    ENDON.
loop at t_head.
         t_item-accnt   = t_head-accnt.
         t_item-hkont   = t_record-hkont.
         t_item-wrbtr2 = t_record-wrbtr2 .
         t_item-mwskz   = t_record-mwskz .
         t_item-gsber   = t_record-gsber .
         t_item-kostl   = t_record-kostl.
    APPEND t_item.
endloop.
     If t_record-level = 'H'.
         t_head-bukrs   = t_record-text1.
         t_head-accnt   = t_record-text2.
         t_head-xblnr   = t_record-text3.
         t_head-wrbtr1 = t_record-text4.
         t_head-waers   = t_record-text5.
         t_head-secco   = t_record-text6.
         t_head-sgtxt   = t_record-text7.
      APPEND t_head.
     else.
        t_item-accnt   = t_head-accnt.
        t_item-hkont   = t_record-text1.
        t_item-wrbtr2 = t_record-text2.
        t_item-mwskz   = t_record-text3.
        t_item-gsber   = t_record-text4.
        t_item-kostl   = t_record-text5.
     APPEND t_item.
     endif.
ENDLOOP.
ENDFORM.
FORM error .
LOOP AT IT_BDC_MESSAGES.
    IF IT_BDC_MESSAGES-msgtyp = 'E'.
   SELECT single * FROM t100 WHERE
                                sprsl = it_BDC_MESSAGES-msgspra
                                AND   arbgb = IT_BDC_MESSAGES-msgid
                                AND   msgnr = IT_BDC_MESSAGES-msgnr.
      IF sy-subrc = 0.
        l_mstring = t100-text.
        IF l_mstring CS '&1'.
          REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
          REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
          REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
          REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
        ELSE.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
        ENDIF.
        CONDENSE l_mstring.
        it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
        APPEND it_mess.
      ELSE.
        it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
        APPEND it_mess.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
form errordownload.
*down the internal table to excel file.
call function 'EXCEL_OLE_STANDARD_DAT'
           EXPORTING
                file_name                 = 'c:/Error.xls'
           TABLES
                data_tab                  = it_mess
                fieldnames                = excel
           EXCEPTIONS
                file_not_exist            = 1
                filename_expected         = 2
                communication_error       = 3
                ole_object_method_error   = 4
                ole_object_property_error = 5
                invalid_filename          = 6
                invalid_pivot_fields      = 7
                download_problem          = 8
                others                    = 9.
endform.
Reward if useful
Regards,
Narasimha
Edited by: narasimha marella on May 13, 2008 12:12 PM

How to make screen resolution independent in BDC

How to make screen resolution independent in BDC

hi
good
You need to use the CTU_PARAM structure alon with the call transaction statment.
**Sturcture of CTU_PARAM
**DISMODE : Display mode (like the MODE addition 'A' , 'E', 'N')
**UPDMODE: Update mode (like the UPDATE addition 'S', 'A')
**DEFSIZE : Use default window size (Here we are handling those transaction by giving default window size)
**RACOMMIT: Do not end transaction at COMMIT WORK
**NOBINPT : No batch input mode (that is, SY-BINPT = SPACE)
**NOBIEND : No batch input mode after the end of BDC data.
*The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
DATA : L_OPTION TYPE CTU_PARAMS, "Parameter string for runtime of CALL TRANSACTION
L_SUBRC TYPE SYSUBRC.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01' "FK01-Vendor master creation
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
thanks
mrutyun^

How to solve screen resolution in bdc

hi experts,
please tell me how to solve screen resolution in bdc.
regards.
subhasis

Hi,
Pls check other posts in SDN before posting ur thread..there is same thread related to this on this forum on same day.
Screen resolution means different in the screen display depending on ur system screen resolution.
suppose ur system resolution is diff and another's system is different then like in Tcode VA01, there will be 3 lineitems and another there will be 5 lineitems ,
so while doing recording and page down that will bw diff so there will be some problem
So u have to set the screen resolution as default by using CTU parameters..
write this code then
f_option-updmode = 'S'.
f_option-defsize = 'X'.* f
_option-dismode = 'N'.
*call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
Hope it helps.
Regards,
Sonika

How to change screen resolution on touchpad

how to change screen resolution on touchpad ?i was working on my tp and out of the blues my screen looks like it is at 800*600
or is this the screen itself that went bad?
can someboby please tell me the procedure to use the 12 mt warranty..
tia
Post relates to: HP TouchPad (WiFi)

Sorry to say reloading WebOS did not help this issue on my TP. contacted Support and was told to send it.Even sorrier to say that my TP is now lost. My tracking number reports it as delievered on Dec 5, but HP has no record of it.When I got back on Chat they are now also telling me that my TP serial number is a EU model, even though my box clearly states HP Touchpad ,US, 1.20,32gb,Wifi.
Not sure what that even has to do with it being lost now..if it is as they say and no warranty on it in US I just want it sent back.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Dual monitor not working under Boot Camp on Mac Pro ATI HD 2600 XT

Recently got a brand new Mac Pro with ATI Radeon HD 2600 XT graphics card.
On the Mac side (Leopard), everything works perfectly: my second monitor (a plasma screen connected with HDMI to the second DVI of the ATI card via HDMI/DVI adapter) is fully recognized and it works as an extended desktop or in Mirroring mode.
Under Boot Camp (Windows XP Pro) however, NOTHING: the second monitor always appears in the display properties, but it is grayed out (inactive), and when I try to activate it, it switches back to being grayed out immediately and nothing gets displayed on it.
After reading all the posts I can find on the topic, I tried the following (in pretty much every possible combination - Thank god for WinClone that allows me to restore the Boot Camp basic install image without having to reinstall Windows from scratch every time):
a) Bootcamp 2.0 (installed by default by Bootcamp assistant)
b) Update to Bootcamp 2.1
1) Windows XP Pro SP2c vanilla install (from my Windows XP pro install disk)
2) Update to Windows XP SP3 (I tried with and without BC 2.1: both worked -> BC 2.1 didn't seem to be required for SP3 - maybe because this is a mac pro and not a MB or MBP)
i) ATI drivers installed by default by Boot Camp assistant (BC 2.0) or by BC 2.1
ii) Latest ATI drivers found on ATI web site specifically under Boot Camp / Mac Pro.
Note: Interestingly, the catalyst installer worked ok (provided .NET framework 2.0 is installed though), but it seems that the Radeon BootCamp/Mac Pro driver set itself from ATI's web site does NOT include a driver for the HD 2600 XT - so when I install this driver set, it tells me that no compatible hardware was found...
iii) Latest ATI drivers found under Windows XP (these did include one driver specifically for the Radeon HD 2600 XT)
NOTHING seems to work. I read posts (most of the from late last year) about ATI Catalyst utility showing a 3rd monitor at some point, but I never got any 3rd monitor showing in any of my many many trials with Catalyst. I have yet to get a single image appear on my plasma under Bootcamp Windows. I don't believe its the hardware because everything works great on the max OS X side.
I am actually considering switching to an NVidia 8800 GT just to get the dual screen to work under BootCamp/Windows XP because I really need it and I read everywhere that drivers for NVidia are far better than ATI ones.
Any advice? What should I try next before getting an 8800 ?
Is there a diagnostic utility that I can use to test my config including the GC?
Thanks!

Hi there aside from my laptop I have an iMac 20" with the same HD 2600 XT card. I recently installed the Catalyst 8.6 driver by using a driver mod from driverheaven, I use Vista 32. By installing it this way I got boosted performance and many issues with the bootcamp drivers were fixed. As you may already know the ATI drivers do not install on bootcamped macs usually but the mod tool fixes this. Its unofficial so do so at your own risk but try it out and see if you get the second monitor if not just rollback. Hope this helps and I didn't want to say too much about the 8.6 driver mod because it may not be allowed here but google will provide any answers.

Latest Windows 8.1 update under Boot Camp loses my cursor

I was having no problems running Windows 8.1 under Boot Camp on my MacBook Pro Retina (2012) with the latest Boot Camp drivers until I tried downloading Microsoft's latest major update to Windows 8.1 (KB2919355). After installing the update, I lost my cursor. The trackpad and a USB mouse both "worked" by highlighting icons and windows at random, but without a cursor I'm flying blind. It seems to be a video or screen driver issue. I chatted with Apple and spoke to Microsoft on the phone. They both suggested that I uninstall the update, which I have done. And that does bring back my cursor. The only hope is that Apple and Microsoft can work out this problem between the Apple drivers and the Microsoft update. I understand that this latest Microsoft update is a prerequisite for future Microsoft updates, so I hope they straighten this out. Is anyone else suffering from this problem?

Hi
I have exactly the same problem on my MacBook Pro Retina (early 2013). After updating from Windows 8 to Windows 8.1 (KB2919355) the mouse cursor is invisible on the desktop. On the Lockscreen and Sign In screen the cursor is visible. My resolution is 1920x1200. I connected also another "normal" mouse device and I have the same effect.
When starting Windows in Safe mode the cursor is visible. When uninstalling the update KB2919355 everything works again.
See also http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_update/kb291 9355-makes-mouse-pointer-invisible/b9d014f1-9ec1-4faa-a046-7b96fcd66661 .
I use the latest version of BootCamp http://support.apple.com/kb/DL1720.
Thank you to solve this issue.

No headphones under Boot Camp

When running Vista x32 under Boot Camp on my 13" MBP, I can't get sound through the headphones - only through the internal speakers. Based on previous recommendations that have been posted, I uninstalled and reinstalled the Boot Camp drivers - but the problem persists. I've tested several different headphones and none work under Boot Camp.
However, when running OS X or running Vista under Fusion, the headphones work as expected.
Any recommendations what I should try next?
thanks!

Had the exact same issue. I would plug-in my headphones and the sound would continue to come out of the internal speakers instead of the headphones.
HOW TO FIX
-Plug in your headphones
-Right click on the little speaker in the system tray and click on "Playback Devices"
-Right click on Speakers (Cirrus Logic) and disable
-The sound should now only be coming out of the headphones

How to increase screen resolution in Vista under boot camp?

Similar Messages

Maybe you are looking for