How to increase the BOM Alternate field in CS01
Hi,
We are interfacing between SAP and third party PLM software (Innovator) to bring the BoM date for CS01 transaction. the third party PLM is having 3 digit version, whereas IN CS01 the BoM alternate takes only 2 digit . kindly suggest the best solution to map the date to CS01 requirement (the RFC are working fine and we are uploading thrrough BDC)
regards,
paveetra
Dear
"Alternative selection for multiple BOMs"
(Transaction OS32).
select the bom Application and check all the box like mrp elxp rel for costing
with regards
pushpala
Similar Messages
-
How to increase the width of field Whld Tax
Dear Friend,
I was configuring WHT formulae for TDS setcion code 195 with Time dependant formulae
My requirement is If the base amount is 100000 the TDS will be as under:-
TDS @ 10% = Rs10000/-
Surcharge @2.5% = Rs.250/- (2.5% on Rs.10000) as such in the formulae I have put 0.25
E Cess @ 3% on (102.5) = Rs308/- ( 2.5% on Rs10000250) for this I need to put formulae 0.3075
But the field is not accepting 0.3075 , It is only accepting upto 2 decimal places
Please advise how to increase it.
Regards,
AlokDear Srini,
I want to create time dependant WHT Code with the below requirement:-
My requirement is If the base amount is 100000 the TDS will be as under:-
TDS @ 10% = Rs10000/-
Surcharge @2.5% = Rs.250/- (2.5% on Rs.10000) as such in the formulae I have put 0.25
E Cess @ 3% on (102.5) = Rs308/- ( 2.5% on Rs10000250) for this I need to put formulae 0.3075
I have created thre different Wht Tax Code and in the rate field maximum five character can be put, but for calculating 3% E Cess I have to put 0.3075 which is 3% on (10% + 2.5%).
How can I do it please advise.
In time independet tax code there is a provision to put 6 character but in time dependant max 5 character.
Regards,
Alok -
How to increase the number of fields to be displayed in search tab
HI,
I have and opportunity search tabOPP_DISPLAY_SEARCH_RESULT. Currently it is displaying only 9 fields . I have 12 fields as mandatory fields but 3 fields are missing still how to get them. We need to enforce this for all users.
Thanks
NaveenHi Raj,
Thank you for the reply but the problem is if you see in the personalization we see the fields but I want to make it displayed so that default search list contains the field. The field which I was see by default is a EEWB field and another thing is there any way to remove the number of fields to be displayed as Currently I see only 9 fields in the default list. How can i increase it.
thanks
naveen -
How To Increase the Size of Memo Fields 4000 Char in WebCenter 11g?
How To Increase the Size of Memo Fields greater than 4000 Char in WebCenter Content (UCM) 11g?
I was able to increase the size of Memo field from 2000 Char to 4000 by setting parameter value MEMOFIELDSIZE=4000 . But the requirement is to increase the size more than 4000 around 7000 char but Database(Oracle 11G) is not supporting more than 4000 char.
Is there any other way to increase the size of Memo field?
Thanks in Advance!!
Regards
RamHello All,
Thanks for your responses.
Let me explain the scenario again in detail:
1. we have three meta-data fileds xProductCategory,xProductFamily and xProducts
2. These fields are related with DCL feature and corresponding values are being stored in corresponding custom Views
3. xProducFamily is dependent of xProductCategory and xProduct is dependent on xProductFamily
4. currently, there are around 250 Product values and average name of Product can be of 25 Char, so if we are selecting all product values for some Contents then Product Values are being stored in DocMeta table as comma separated values with one space, so total characters are being very high than 4K Char.
5. Currently view that is storing the Product values, stores "Name" column instead of ID(like 1,2,3....)
6. And our Content Server is integrated with Oracle WebSenter Portal, where logic has written to retrieve the contents based on "Product Name" instead of "Product ID" and already we are in UAT phase.Currently we are not in situation to revert the changes from Product Name to Product ID.
7. Also if we are storing the values on the basis of Product ID, then again the issue may arise in Future, if the number of Products increased.
Hoping the issue explanation is clear now and waiting for some possible solution for increasing the length of memo field.
Thanks in Advance !!
Regards
Ram -
How to increase the DFF fields length
Hi Gurus,
its very urgent requirement ,how to increase the dff field length in standard page i.e self-service appraisal page,please help me
Regards,
SreeniHi Ayaz/Sreese,
As per my requirement user enable the DFF Fields in perticuler pages in sshr module like PMS So ...i create the attribute columns and viewinstance through personlization create the column and i give the hight and lenght in column cration time i create the id like "XXApr" same id name i gave in DFF Field Names.....so i did like ....this is my approch.....
---u have any doubts fell free to post the mail..i fwd through screen shots then only u undershood ,([email protected])
Regards,
Srinivas -
How to increase the decimals in RPD for some field?
Hello gurus,
We have 1 filed in DW name as "EXCHANGE_RATE" when i query it DW it's showing me values with 4 decimal points.
and same column when i m using in OBIEE frontend, it's giving me values with 2 decimals.
So how to increase the decimals for that field in RPD?
we have 10.1.3.4.1 version.
Thanking You.Hello Svee,
Thanks for ur help, But I found one different way that will make change only to that particular filed.
Bcz if I will change the database properties that will change the configuration globally to all the fields.
So what I did is, I went to column properties and change the Data Format to 4 decimals and saved it as System-wide default for that field.
So, the change that i want will be their only for that filed...
Though I really appreciate ur help.
Thanking you. -
How to increase the speed of video (avi file) using labview
How to increase the speed of video (.avi file) using labview? I have tried this by skiping alternate frames. also I have used minimum time delay.Is there any other option for which i can go?
please suggest me...........Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison -
How to Increase the Length of Condition table in OV20
While creating a condition table in T.code OV20 if fields length is more that 50 bytes table is not getting generated.it gives error as Too Many Fields Selected(More than 50 Bytes).
Actually i need to create a tabel with Basic Material(WRKST) which has length of 48 bytes.
Is there a solution on how to increase the length so that error is avoided.
There is no such error occuring while crating condition table in V/03Hi,
You can try to use the type string:
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fieldxx type string,
dayst like zscr_data_hdr-dayst,
end of t_data.
So you can save you informations of every fld<n> concatenating their values into fieldxx.
Regards -
How to increase the length of internal table dynamically
How to increase the length of internal table dynamically depending on the number of fields fetched into the internal table ?
The requirement code :
types: begin of t_data,
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fld1 like zscr_defect_data-defect_val,
fld2 like zscr_defect_data-defect_val,
fld3 like zscr_defect_data-defect_val,
fld4 like zscr_defect_data-defect_val,
fld5 like zscr_defect_data-defect_val,
fld6 like zscr_defect_data-defect_val,
fld7 like zscr_defect_data-defect_val,
fld8 like zscr_defect_data-defect_val,
fld9 like zscr_defect_data-defect_val,
fld10 like zscr_defect_data-defect_val,
fld11 like zscr_defect_data-defect_val,
fld12 like zscr_defect_data-defect_val,
fld13 like zscr_defect_data-defect_val,
fld14 like zscr_defect_data-defect_val,
fld15 like zscr_defect_data-defect_val,
fld16 like zscr_defect_data-defect_val,
fld17 like zscr_defect_data-defect_val,
fld18 like zscr_defect_data-defect_val,
fld19 like zscr_defect_data-defect_val,
fld20 like zscr_defect_data-defect_val,
fld21 like zscr_defect_data-defect_val,
fld22 like zscr_defect_data-defect_val,
fld23 like zscr_defect_data-defect_val,
fld24 like zscr_defect_data-defect_val,
fld25 like zscr_defect_data-defect_val,
fld26 like zscr_defect_data-defect_val,
fld27 like zscr_defect_data-defect_val,
fld28 like zscr_defect_data-defect_val,
fld29 like zscr_defect_data-defect_val,
fld30 like zscr_defect_data-defect_val,
fld31 like zscr_defect_data-defect_val,
fld32 like zscr_defect_data-defect_val,
fld33 like zscr_defect_data-defect_val,
fld34 like zscr_defect_data-defect_val,
fld35 like zscr_defect_data-defect_val,
fld36 like zscr_defect_data-defect_val,
fld37 like zscr_defect_data-defect_val,
fld38 like zscr_defect_data-defect_val,
fld39 like zscr_defect_data-defect_val,
fld40 like zscr_defect_data-defect_val,
fld41 like zscr_defect_data-defect_val,
fld42 like zscr_defect_data-defect_val,
fld43 like zscr_defect_data-defect_val,
fld44 like zscr_defect_data-defect_val,
fld45 like zscr_defect_data-defect_val,
fld46 like zscr_defect_data-defect_val,
fld47 like zscr_defect_data-defect_val,
fld48 like zscr_defect_data-defect_val,
fld49 like zscr_defect_data-defect_val,
fld50 like zscr_defect_data-defect_val,
fld51 like zscr_defect_data-defect_val,
fld52 like zscr_defect_data-defect_val,
fld53 like zscr_defect_data-defect_val,
fld54 like zscr_defect_data-defect_val,
fld55 like zscr_defect_data-defect_val,
fld56 like zscr_defect_data-defect_val,
fld57 like zscr_defect_data-defect_val,
fld58 like zscr_defect_data-defect_val,
fld59 like zscr_defect_data-defect_val,
fld60 like zscr_defect_data-defect_val,
fld61 like zscr_defect_data-defect_val,
fld62 like zscr_defect_data-defect_val,
fld63 like zscr_defect_data-defect_val,
fld64 like zscr_defect_data-defect_val,
fld65 like zscr_defect_data-defect_val,
fld66 like zscr_defect_data-defect_val,
fld67 like zscr_defect_data-defect_val,
fld68 like zscr_defect_data-defect_val,
fld69 like zscr_defect_data-defect_val,
fld70 like zscr_defect_data-defect_val,
fld71 like zscr_defect_data-defect_val,
fld72 like zscr_defect_data-defect_val,
fld73 like zscr_defect_data-defect_val,
fld74 like zscr_defect_data-defect_val,
fld75 like zscr_defect_data-defect_val,
fld76 like zscr_defect_data-defect_val,
fld77 like zscr_defect_data-defect_val,
fld78 like zscr_defect_data-defect_val,
fld79 like zscr_defect_data-defect_val,
fld80 like zscr_defect_data-defect_val,
fld81 like zscr_defect_data-defect_val,
fld82 like zscr_defect_data-defect_val,
fld83 like zscr_defect_data-defect_val,
fld84 like zscr_defect_data-defect_val,
fld85 like zscr_defect_data-defect_val,
fld86 like zscr_defect_data-defect_val,
fld87 like zscr_defect_data-defect_val,
fld88 like zscr_defect_data-defect_val,
fld89 like zscr_defect_data-defect_val,
fld90 like zscr_defect_data-defect_val,
fld91 like zscr_defect_data-defect_val,
fld92 like zscr_defect_data-defect_val,
fld93 like zscr_defect_data-defect_val,
fld94 like zscr_defect_data-defect_val,
fld95 like zscr_defect_data-defect_val,
fld96 like zscr_defect_data-defect_val,
fld97 like zscr_defect_data-defect_val,
fld98 like zscr_defect_data-defect_val,
fld99 like zscr_defect_data-defect_val,
fld100 like zscr_defect_data-defect_val,
fld101 like zscr_defect_data-defect_val,
fld102 like zscr_defect_data-defect_val,
fld103 like zscr_defect_data-defect_val,
fld104 like zscr_defect_data-defect_val,
fld105 like zscr_defect_data-defect_val,
fld106 like zscr_defect_data-defect_val,
fld107 like zscr_defect_data-defect_val,
fld108 like zscr_defect_data-defect_val,
fld109 like zscr_defect_data-defect_val,
fld110 like zscr_defect_data-defect_val,
fld111 like zscr_defect_data-defect_val,
fld112 like zscr_defect_data-defect_val,
fld113 like zscr_defect_data-defect_val,
fld114 like zscr_defect_data-defect_val,
fld115 like zscr_defect_data-defect_val,
fld116 like zscr_defect_data-defect_val,
fld117 like zscr_defect_data-defect_val,
fld118 like zscr_defect_data-defect_val,
fld119 like zscr_defect_data-defect_val,
fld120 like zscr_defect_data-defect_val,
fld121 like zscr_defect_data-defect_val,
fld122 like zscr_defect_data-defect_val,
fld123 like zscr_defect_data-defect_val,
fld124 like zscr_defect_data-defect_val,
fld125 like zscr_defect_data-defect_val,
fld126 like zscr_defect_data-defect_val,
fld127 like zscr_defect_data-defect_val,
fld128 like zscr_defect_data-defect_val,
fld129 like zscr_defect_data-defect_val,
fld130 like zscr_defect_data-defect_val,
fld131 like zscr_defect_data-defect_val,
fld132 like zscr_defect_data-defect_val,
fld133 like zscr_defect_data-defect_val,
fld134 like zscr_defect_data-defect_val,
fld135 like zscr_defect_data-defect_val,
dayst like zscr_data_hdr-dayst,
end of t_data.
In this fld1 to fld135 are defined in internal table.
But if the number of fields are more than 135 then the program is going to short dump.
Some times fld1 to fid170 or more fields will be there in my internal table.
Please suggest me how to make my requirement dynamic and display this data fetched into this internal table onto a .XLS file in the presentation server ?Hi
You can try to use the type string:
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fieldxx type string,
dayst like zscr_data_hdr-dayst,
end of t_data.
So you can save you informations of every fld<n> concatenating their values into fieldxx.
Max -
How to increase the space of a page in Application Designer ?
Folks,
Hello. I am developing a page in Application Designer.
I need to place multiple records with many fields in the page. But the entire space of the page is not enough to place the fields. We need to use a vertical scroll to increase the space of the page to hold all of the fields. But I don't understand how to do this feature.
Can any folks tell me how to increase the space of a page in Application Designer in order to hold many fields ?Folks,
Hello. Thanks a lot for replying. It's correct ! -
How to Increase the retreving size of instances using PAPI filters.
Hi,
How to Increase the retreving size of instances using PAPI filters.
In my engine database instance size exceeds 2500 then we are getting following exception.
If we login in to user workspace able to see the instances but while trying to retrieve from PAPI getting below exception and showing the user's inbox aize as 0.
In Process Admin console we set all the required parameters.
Still I m getting the same problem.
Can you please lgive mev the solution.
<Mar 23, 2010 8:58:24 PM SGT> <Warning> <RMI> <BEA-080003> <RuntimeException thrown by rmi server: fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl.getInstancesByFilter(Lfuego.papi.impl.j2ee.EJBSecureEngineInfo;Ljava.lang.String;Lfuego.papi.Filter;)
java.lang.ClassCastException: cannot assign instance of java.util.HashSet to field fuego.view.FilterImpl.attributes of type java.util.List in instance of fuego.view.FilterImpl.
java.lang.ClassCastException: cannot assign instance of java.util.HashSet to field fuego.view.FilterImpl.attributes of type java.util.List in instance of fuego.view.FilterImpl
at java.io.ObjectStreamClass$FieldReflector.setObjFieldValues(ObjectStreamClass.java:2032)
at java.io.ObjectStreamClass.setObjFieldValues(ObjectStreamClass.java:1212)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1953)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
Regards,
Bharath.
Edited by: bg57295 on Mar 24, 2010 6:45 PMHi Bharath,
Believe me, you have an incompatibility between different build#.
PAPI has an instance cache. When certain process has more instances than the maximum specified, the cache is switch to status OPEN. That means, that PAPI will not be able to resolve some instance queries using the information in the cache. When that occurs, PAPI forward all those queries to the engine.
The incompatibility introduced is in the communication between PAPI and Engine. So, you only get the exception when you have more instances than the maximum cache size.
Regards,
Ariel -
How to increase the line items against the std no of line items in MIGO
hi,
I have PO with more than 100 line items
During GR system is showing the error message as
Maximum number of items F1 reached
What is the standard no of line items in MIGO
And how to increase the line items
Is there any notes to apply
plz give sutable solution
K.RaghuramDo you get message F5727 "Maximum number of items in FI reached"? reason is that in FI the posting line has a three-digit line item number (BSEG-BUZEI).
SAP's note 117708 provides a modification. I am pasting solution below.
Via the summarization you can post documents with more than 999 items in
FI.
The modification required for this is small, in addition you have to
change 2 tables. The modification is carried out in FI not in invoice
verification.
To activate document summarization in FI proceed as follows:
- The changes are described in Note 36353 and for the
modification in Note 77161. You may also have to apply Note
67640 so that the document summarization affects inventory
management.
An advice for the notes:
36353: Solution point 3: Field name WERKS
77161: Solution point 2: Maintain table TTYPV with Transaction
SE16
- this has the following effects; you can no longer clear the
GR/IR clearing account on purchase order item level (but only
on purchase order level) and you can only display the FI data
summarized (also see Note 36353) -
How to increase the size (Length and width) of check box
Hi All,
I have to increase the size of ( width and length) of check box, I have revised to check box topic in dev guide but didnt find any clue, i have also tried to use CCStyle class but that is also not working, I would appreciate if some can help me out on this. Thanks in advance , let me know if any clarification required.
Thanks
PratapHi Pratap ,
I honestly don't know how to increase the size
But i am giving you an alternate solution : we can create two Images with check box type 1 ) with checked
2 ) with unchecked . ( you can create image of any size ) and get them displayed on OAF screen dynamically using switcher case .
Dynamically displaying image will give the illusion of check box being checked and unchecked .
keep this image moved to following media directory
eg : /oraapp/mfgtestcomn/java/oracle/apps/media .
Implement the switcher case , add the fire action to this Image Column , create a transient attribute and attach to this
column . Depending on the value returned by transient attribute display the image on the column .
Let me know if its not clear .
Keerthi -
How to increase the width of the Crystal Report
Hello All
How to increase the width of the Crystal report template in the CR designer in .NET 2005 editor ?
I need to design a report which has to accomodate more number of columns.So achieve that i need to redesign the report having more width.
CrystalReports version 10.2.3600.0
Thanks in advance
SrivatsaHI Srivatsa,
You can make a wider report by creating virtual pages. Virtual pages are the extra pages to the right of the main page that get created to accommodate cross-tabs that are wider than a single page. By inserting a cross-tab in a report then suppressing it, you can create a report that is multiple pages wide.
Insert and Suppress a Cross-Tab
1. On the 'Insert' menu, click 'Cross-Tab'.
2. In the Cross-Tab Expert, click any field and move it into the 'Columns' box, and click any field and move it into the 'Summarized Fields' box. Do not move any fields into the 'Rows' box.
3. Click the 'Customize Style' tab and select the following check boxes:
" Suppress Empty Rows
" Suppress Empty Columns
" Suppress Row Grand Totals
" Suppress Column Grand Totals
4. Click the 'OK' button and then insert the cross-tab into the Report Header section.
5. On the 'Report' menu, click 'Format Sections'. Click 'Report Header' and select the 'Underlay Following Sections' check box.
When you run the report you will not see the cross-tab, but you will be able to scroll to the right and see multiple virtual pages.
====================
NOTES:
" As there are no rows to the Cross-Tab, it does not carry on to Page 2 and the virtual pages do not appear past the first page.
" To increase or decrease the number of virtual pages do one of the following:
- Limit the number of records for the field in the 'Column' box of the 'Cross-Tab Expert' using the 'Select Expert'.
- Change the width of the 'Column' field in the Cross-Tab by moving the edges of the field.
====================
How to Insert Fields on Virtual Pages
You cannot drag-and-drop a field onto a virtual page, you can only do so on the main page. To get a field to appear on a virtual page:
1. Insert the field on the main page.
2. Click the 'Preview' tab.
3. Drag the right edge of the field to the right, onto the virtual page.
4. Drag the left edge of the field to the right, onto the virtual page.
Hope this helps!!
Regards,
Shweta -
How to increase the width size between PROMPT and TEXT BOX?
Hi Gurus,
my page having MessageTextInputs. Normally page runs displays the Prompt name and one text box will displayed.
my requirement is
1) how to increase the width size between PROMPT and TEXT BOX?
2)prompt name displays like
elephant
xxxxxant
xxxxRose
here xxxxx indicates SPACE
but my client requirement is don't displays the SPACES in left side.
so our requirement is in page PROMPT displays like
elephant
ant
rose
How to achieve this plz help me
its very urgent
ThanksHi,
Create a table layout region and under that use 'messageStyledText' for displaying the prompt and use 'messageTextInput' for text field without giving any prompt to that.
--Sushant
Maybe you are looking for
-
Is it currently possible to create a doughnut chart with multiple concentric circles in SSRS?
Is there currently any way to create a 'doughnut' chart with multiple concentric circles in an SSRS report (any version), without using 3rd party tools? Something like this, perhaps? (For that matter is it possible to create this using JavaScript? I
-
Server load balancing onto itself
hi I have a customer with 4710 that load balances inbound traffic onto 2 servers. this works There is also a requirement for the servers that are load balnced to [what seems to me ] to load balance onto themselves and for other server on the same vla
-
Tracking button active state?
Hi - I have three pages within a section of a site - when the user clicks on a text button to go there, I'd like the text link to show active. In this case, the text is black - when you rollover it becomes red. So, when you're on a page, I'd like the
-
Error while invoking simulator
Hi, <remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke: ; nested exception is: dynamic invocation error: javax.xml.soap.SOAPException: Error parsing envelope: (1, 1) Start of ro
-
10.5.3 Update Breaks Applications
I resolved the issue, but I was just wondering if anyone else has had any issues where right after you restart your computer after the 10.5.3 update, all your applications don't open and freeze up. It happened to me several times, and I eventually ju