How to increase the horizon (in days) for a resource

Hi experts,
I'm trying to update my resources registered in the APO Master Data so that its bucket capacity list (which currently is valid from 06.2010 to 12.2010) to become valid until 2012. However, regardless of the value registered at the field Days + the range stays from 06.2010 to 12.2010. Could anyone tell me how should I proceed?
Below is an example of a registered resource:
tab: Bucket
Resource: R
Category (Cat): P - Production
Location: L
Time Zone: BRAZIL
Bucket Dimensn: Time
Factory Calendar: 99 - International
Bucket Capacity: 1
Unit: D - Days
Number of Periods: 1
Period Type: Day
Days -: 0
Days +: 1000
Moreover, after some research I found in the forum recommendations about the usage of the /SAPAPO/CRES_CAPACITY_LENGTHEN report. However, I was not able to run it (I simply typed /SAPAPO/CRES_CAPACITY_LENGTHEN in field on the upper right of the main screen and press the Enter button. As a result, the message "This function is not possible" was available at the bottom of the screen).
I am using the version 5.0 of the APO.
Thanks in advance for help.
Edited by: Francisco Fonseca on Jul 6, 2010 6:02 PM
Edited by: Francisco Fonseca on Jul 6, 2010 6:10 PM
Edited by: Francisco Fonseca on Jul 6, 2010 6:12 PM

Hi Francisco
If you are trying extend the validity of the resource, then as you said that you tried extending the resource by extending the General data tab, and the validity of the resource still remains till 12.2010.
The validity of the resource if governed by a couple of things :
Validity as defined in R/3 Work center under capacity tab in the APO resource tab
In CFC9, you can define what should the validity of the resource be, when you are CIFing the resource.
Moreover, as you have righlty read in various posts across the forums, you can use the report /SAPAPO/CRES_CAPACITY_LENGTHEN to extend the validity of the resource. But I am not sure how are using this report. Please type in se38, enter this report and execute. In the next screen, enter the version, the resource and the location at which the resource exists. Click on execute and validity of the resource should increase.
Let me know if it helps.
Rgds, Sandeep

Similar Messages

How to increase the number of days in syslog

Currently syslog keeps 1 days events with additional log files for the previous 6 days.
Is there a way to either increase the number of backup logs or increase the number of days in each log. I would love to have 2 to 4 weeks of events.
much thanks
john

In Mavericks, /var/log/system.log rotations are now handled by /etc/asl.conf
look at options: ttl=DAYS, file_max = SIZE and all_max = SIZE
Cheers

How to increase the decimals in RPD for some field?

Hello gurus,
We have 1 filed in DW name as "EXCHANGE_RATE" when i query it DW it's showing me values with 4 decimal points.
and same column when i m using in OBIEE frontend, it's giving me values with 2 decimals.
So how to increase the decimals for that field in RPD?
we have 10.1.3.4.1 version.
Thanking You.

Hello Svee,
Thanks for ur help, But I found one different way that will make change only to that particular filed.
Bcz if I will change the database properties that will change the configuration globally to all the fields.
So what I did is, I went to column properties and change the Data Format to 4 decimals and saved it as System-wide default for that field.
So, the change that i want will be their only for that filed...
Though I really appreciate ur help.
Thanking you.

How to get the last seven days for out put of present day

Hi Experts,
we developed one query for 3 years data
1.user enter the current date (21-03-2014) but out put value should be last seven days (21-03-2014 - 7) (last one week data only)
2.some times user will enter the (20-03-2014 ) but out put value should be last seven days (20-03-2014 - 7) (last one week data only)
how to achieve the 2 different scenario?
is there any standard variable ? please suggest .
Thanks,
Bindu.

Hi,
i created the Characteristic value variable not formula variable
in char variable i can't see the off set functionality but we can see off set function in formula variable
user requirement he wants enter the input value as date and he need last week data means one week data calday wise.
i tired the 0PREVWK , 0CWEEK these two variables these not asking the input and direct showing the out put.
these can achieve through the customer exit?
Thanks,
Bindu.

How to increase the Java Heap Space for a main method

Hello all,
after a given number of calculations inside a class with main-method, I get an OutOfMemoryError (Java Heap Size).
So I'm just trying to increase the Heap Size Creator uses, but it won't work.
After reading a lot of posts and online-articles, I tried the following:
1) I changed the -Xms and -Xmx options (to 512m) both in
$CREATOR/SunAppServer8/domains/creator/config/domain.xml and
$CREATOR/etc/creator.conf (this file also points to the Creator built-in JDK)
2) additionally I tried to start Creator from the console with the respective option:
./creator -J-Xmx512m
The memory toolbar shows the right value, but when I use
System.out.println("JVM maximum memory:\t"+Runtime.getRuntime().maxMemory()/1024+" KB\n");it always says 64 MB, no matter which option I chose in the config-files.
So how can I increase this value?
Regards,
Felix
Message was edited by:
Felice
Message was edited by:
Felice

Thank you very much,
this was an important hint. Additionally I had to create a new "Java Class Library" project with a copy of the needed files (those that are not dependent on the Application Server). Then I could use the option you mentioned.
Unfortunately, when I try to run the file with
java -jar FILENAME.jarit won't work, because the archive is not complete: MANIFEST.MF lacks the main-class and all involved libraries.
I managed to add the main-class attribute manually, but adding all library references seems to be very error-prone.
So does anyone know if I did something wrong or if this is a bug of Creator?
Regards,
Felix

How to increase the number of rows for Entry via Excel in SSM ?

hello
we are facing a scenario where we need to enter the target data for more than 14000 fields.So when we open the excel ad in and trying to upload, it is accepting data for only 500 fields and the rest are not getting displayed.
The condition is that we have to enter data via Entry and Approval and not using a procedure and multiple metric sets is not a feasible option since the number of records is large. How can the number of rows in excel be increased ?
Vijay

Hi Bob
I am facing another problem....
we have designed our model in such a way that we built it using normal procedures but the target values have to be entered using entry and Approval via Excel ad-in..
the problem we are facing is that if we select both the actual and the target measures to load the data via Excel login then the column TARGET is getting greyed out. When we build the same model using cube builder , the column TARGET is not getting greyed out and we are able to enter data there.
Is there any setting changes we need to make inorder to make the Entry and Approval process via Excel behave the same way when the model is built using the Cube builder ? Are there any new notes or a newer version of Excel ad in to resolve this ?
Vijay

How to increase the dhcp IP range for sunray server

Hello,
We need help on how to reconfigure DHCP on sunray server. The current configuration is range of 150 DHCP addresses has been configured for the 10.218.0.0 network, which is exhausted now.
Yes with utadm -a will add new and -d will delete, here do we have any option to reconfigure and add additional 10 more addresses.
OR any thing that how to backup existing network configuration and then delete->and add new configuration.
Appreciate help on this.
Thanks,
Dattatray.

Hi Francisco
If you are trying extend the validity of the resource, then as you said that you tried extending the resource by extending the General data tab, and the validity of the resource still remains till 12.2010.
The validity of the resource if governed by a couple of things :
Validity as defined in R/3 Work center under capacity tab in the APO resource tab
In CFC9, you can define what should the validity of the resource be, when you are CIFing the resource.
Moreover, as you have righlty read in various posts across the forums, you can use the report /SAPAPO/CRES_CAPACITY_LENGTHEN to extend the validity of the resource. But I am not sure how are using this report. Please type in se38, enter this report and execute. In the next screen, enter the version, the resource and the location at which the resource exists. Click on execute and validity of the resource should increase.
Let me know if it helps.
Rgds, Sandeep

I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for

I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for.

StevieJ wrote:
I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for.
Check Mail Preferences, Accounts tab. Select the account, then the Mailbox Behaviors tab. See if you have it set to Permanently erase deleted messages when: One week old. (or less)

Is there any way to increase the amount of space for all day events?

I have iCal on my ipad and my phone, and when I look at the daily view or weekly view, only 1 1/2 lines are shown. If I have a few events that are all day (I keep several calendars) then I have to scroll through them one at a time. And with my fingers, sometimes they go by too fast. Does anyone know how to increase the amount of space? I am using an iPad3, and an iPhone 5, both with ios 7.
Thank you!

With Mac OS X, there is no way for you to alter the amount of real memory a program is allocated. This is all done dynamically by the OS. OS X's virtual memory management is far better than 'ole OS 9's.
What are saying about a memory leak? I take it that Safari is continually using more and more memory. How much memory is it usually taking up after a few hours? Perhaps you should just quit and restart Safari every few hours before it begins failing to respond.

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.

How to increase the performance in server 2008 R2 for RDP users

Hi,
My application take to much time to load. If anyone double click on mail client the exe file will appear in task manager but it will open after 5 mins. how to increase the performance.
My sever configuration is as below,
SC2600 Intel motherboard with total 24 core processors and 32 GB RAM and 8 TB Hard Disk. RAID 5 is configured which has two lungs one is 167 GB for C drive and other is 4.5 TB for D drive.
There are 28 Thin-clients connected to server through L300 N computing Thin-clients.
Thin-clients connect to V-space server installed in server for RDP users to get connected.
we have installed around 20 applications including printer and scanner driver. And apps are has below,
Firefox browser, windows mail, Adobe acrobat XI, canon printer and scanner drivers, Epson printer and scanner driver, E scan anti-virus, office 2007, v space, power ISO, win-rar,Tally and e token drivers and some backup software's.
Below are the services and features enabled,
AD, File services, RDP, web server, Hyper-v, .net frame work.
Is there a way to increase the performance .
Very slow performance.

Hi,
what would you suggest on hardware configuration must be for above mentioned applications and services with those many users.
how many cores and ram size is required.

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

How to increase the number of data Business Object can pull for a report?

Hi,
I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
Thanks

Bobby,
to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti.

How to increase the thread count for JDBC adapter

Hi ALL,
Could someone advice me on how to increase the thread count for JDBC Adapter in Visual Admin:
JDBC_http://sap.com/xi/XI/System.Call.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Recv.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Rqst.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Send.maxConsumers 5
I need to increase them to 10.
Regards,
Xier

hi check the below links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a
admin manual:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fdb09490-0201-0010-e09e-a76388646ad0
note:reward points if solution found helpfull.....
regards
chandrakanth.k

How to increase the horizon (in days) for a resource

Similar Messages

Maybe you are looking for