How to increase the iCal Alert Popup BOX height?

I would like to be able to increase iCal's Alert popup box to show more than two concurrent alert notifications at one time. Ideally, this popup box would dynamically size itself to the number of active alert notifications up to the available screen space. A second less elegant solution would be to enable the user to resize the iCal Alert popup box manually. A third even less elegant solution would be to statically redefine a new default height in terms of either active alert notifications or pixels. Anything would be better than the limitations currently in place...
Here is an example of three concurrent alerts. In this case, the user must scroll down within the iCal Alert popup box to see Alert #3.

Hi
It's not at all possible.
If you want to use a textbox with muliple line items... you need to use Text Edit control. If you want to use that click on the following link for clear information:
http://help.sap.com/saphelp_nw04/helpdata/en/7d/fe9f668af411d3805e00c04f99fbf0/frameset.htm
Regards
Surya.

Similar Messages

How to increase the size of text boxes in FCPX without stretching the text inside?

How to increase the size of text boxes in FCPX without stretching the text inside?

There are two basic Title formats — I should say Layouts — available: Text (plain) and Paragraph. (The plain text version usually does not appear with the blue dot controls — those generally appear for the paragraph type control.)
If the Title is using a Paragraph layout, it's like having a mini version of Text Edit available inside FCPX. You can tell when you click on the text (when the title is selected) -- a rectangle will appear around the text like so:
double clicking on the text will give you the bounds controls which you can use to redefine the text area without distorting the text. Once selected, notice the button that appears in the top right corner of the canvas:
Pressing that will activate the ruler. You can right click on the ruler and add Tab Stops (left, right, center and decimal.)
So if the title uses paragraph formatting, you can create a very WYSIWYG type of display text (use the Text inspector to alter text selections within the paragraph bounds.)

How to Increase the number of string boxes?

I have attached a VI in which the number of string boxes in "No:, Questions , Ok/not Ok, Remarks " are eight.
Can any one help me by changing the number of String/ Numeric boxes from 8 to 50 in all the items?
I am very new to labview and i got this VI from a friend.
Thanks in advance
Sunitha
Attachments:
questions.vi ‏172 KB

I think you will find it much easier if you had an array of clusters. The array can be sized however big you need it. On the block diagram, use a for loop to index through the array a perform whatever actions you want on it. You may also look at event structures to control the read and write.
Look through the help files. They are very complete and the examples offer some good ideas.
Message Edited by jasonhill on 07-06-2006 10:40 AM
Attachments:
array of clusters of controls.PNG ‏22 KB

How to increase the size (Length and width) of check box

Hi All,
I have to increase the size of ( width and length) of check box, I have revised to check box topic in dev guide but didnt find any clue, i have also tried to use CCStyle class but that is also not working, I would appreciate if some can help me out on this. Thanks in advance , let me know if any clarification required.
Thanks
Pratap

Hi Pratap ,
I honestly don't know how to increase the size
But i am giving you an alternate solution : we can create two Images with check box type 1 ) with checked
2 ) with unchecked . ( you can create image of any size ) and get them displayed on OAF screen dynamically using switcher case .
Dynamically displaying image will give the illusion of check box being checked and unchecked .
keep this image moved to following media directory
eg : /oraapp/mfgtestcomn/java/oracle/apps/media .
Implement the switcher case , add the fire action to this Image Column , create a transient attribute and attach to this
column . Depending on the value returned by transient attribute display the image on the column .
Let me know if its not clear .
Keerthi

How to increase the width size between PROMPT and TEXT BOX?

Hi Gurus,
my page having MessageTextInputs. Normally page runs displays the Prompt name and one text box will displayed.
my requirement is
1) how to increase the width size between PROMPT and TEXT BOX?
2)prompt name displays like
elephant
xxxxxant
xxxxRose
here xxxxx indicates SPACE
but my client requirement is don't displays the SPACES in left side.
so our requirement is in page PROMPT displays like
elephant
ant
rose
How to achieve this plz help me
its very urgent
Thanks

Hi,
Create a table layout region and under that use 'messageStyledText' for displaying the prompt and use 'messageTextInput' for text field without giving any prompt to that.
--Sushant

How to increase the font size in the safari tool bar

Hello,
I am trying to set-up Yosemite for my mom who is a senior. The toolbar and address bar for safari seem to be quite small. Does anyone know how to increase the font size in the tool bar and address bar? I already figured out to make the font size bigger on a webpage which is nice but the rest of the interface, though pleasing to look at, is quite miniscule.
Hope someone can help.

I too would like an easier way to do it. The only way that I have found (& it works for all applications, desktops Document & Download files) is to decrease the size of your Screen display from 2560 by 1440 ( this is your "Default for display") to 1920 by 1080. This is accomplished by going to "Accessibility Preferences" in your menu bar or through Systems Preferences and choosing the DISPLAY icon, then unchecking the "Default for Display" Setting and then check "Scaled".
Your screen resolutions will then appear in the drop down box & you can choose a smaller display (e.g. 1920 x 1440), then all print will appear larger on the screen.
If anyone knows a slicker way, I 'm all ears (actually "eyes" would be more appropriate.
I hope this helps you.
-fpn7

How to increase the width of the Crystal Report

Hello All
How to increase the width of the Crystal report template in the CR designer in .NET 2005 editor ?
I need to design a report which has to accomodate more number of columns.So achieve that i need to redesign the report having more width.
CrystalReports version 10.2.3600.0
Thanks in advance
Srivatsa

HI Srivatsa,
You can make a wider report by creating virtual pages. Virtual pages are the extra pages to the right of the main page that get created to accommodate cross-tabs that are wider than a single page. By inserting a cross-tab in a report then suppressing it, you can create a report that is multiple pages wide.
Insert and Suppress a Cross-Tab
1. On the 'Insert' menu, click 'Cross-Tab'.
2. In the Cross-Tab Expert, click any field and move it into the 'Columns' box, and click any field and move it into the 'Summarized Fields' box. Do not move any fields into the 'Rows' box.
3. Click the 'Customize Style' tab and select the following check boxes:
" Suppress Empty Rows
" Suppress Empty Columns
" Suppress Row Grand Totals
" Suppress Column Grand Totals
4. Click the 'OK' button and then insert the cross-tab into the Report Header section.
5. On the 'Report' menu, click 'Format Sections'. Click 'Report Header' and select the 'Underlay Following Sections' check box.
When you run the report you will not see the cross-tab, but you will be able to scroll to the right and see multiple virtual pages.
====================
NOTES:
" As there are no rows to the Cross-Tab, it does not carry on to Page 2 and the virtual pages do not appear past the first page.
" To increase or decrease the number of virtual pages do one of the following:
- Limit the number of records for the field in the 'Column' box of the 'Cross-Tab Expert' using the 'Select Expert'.
- Change the width of the 'Column' field in the Cross-Tab by moving the edges of the field.
====================
How to Insert Fields on Virtual Pages
You cannot drag-and-drop a field onto a virtual page, you can only do so on the main page. To get a field to appear on a virtual page:
1. Insert the field on the main page.
2. Click the 'Preview' tab.
3. Drag the right edge of the field to the right, onto the virtual page.
4. Drag the left edge of the field to the right, onto the virtual page.
Hope this helps!!
Regards,
Shweta

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to increase the row height of the table in the smartform

Hi,
Can any one say,
How to increase the row height of the table in the smartform.
It is presently show the row width very small, i want to increase the row with of the table in the smartform.
Plase say how can we increase the row height in the smartform.

Hi Ravi,
In Smartforms , Select the Table and you can adjust the cell hieghts in OUTPUT OPTIONs TAB.
Reward points if that Helps.
Manish

How to hold the value in List box.

Hi All,
On my screen painter Screen I am displaying the Sold to party and ship to party with thier address.
I am also displaying the Shipping condition based on ship to party. To display the shipping condition i am using list box. Once the user enter the sold to party automatically all the field is going to populate in their respective fields. I am facing the problem that, The list box getting populated with shipping condition but once you choose the shipping condition and hit the enter the list box getting refreshed. I am using this code in PAI event. And I can Only use this in PAI.
The Function i am using for list box is CALL FUNCTION 'VRM_SET_VALUES'.
Pls suggest me how to hold the value in List box.
Thanks,
Rakesh

Hi,
Now i am using in PBO.
the code below in in PBO.It is still not holding the value.
      if list[] is initial.
      perform SHP_COND.
      endif.
form SHP_COND .
*DATA: SHOP(80).
    clear : GT_VSBED, list.
    refresh : GT_VSBED, list.
     select vsbed
       from knvv AS K
       into table GT_VSBED
      where Kvkorg = vbak-vkorg "Kkunnr = GV_STPH
      and K~vtweg = vbak-vtweg
      and K~spart = vbak-spart.
    select VSBED vtext
      from TVSBT
    into table list
    for all entries in GT_VSBED
    where spras = sy-langu
    and vsbed = GT_VSBED-VSBED.
*break-point.
NAME = 'SHP_CON'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
    id                    = NAME
    values                = LIST[]
EXCEPTIONS
   ID_ILLEGAL_NAME       = 1
   OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " SHP_COND
Thanks,
Rakesh

How to increase the number of rows in Status Oveview iView in MSS?

Hi
We have implemented MSS and have a question regarding Status overview iview.
The standard status overview iview of the team workset has 5 rows and we have to scroll using the arrow buttons to select/view a request.
Now can anyone explain me how to increase the number of rows in this iview? Is this somthing that has to be accoplished through web dynpro customization?
I checked the options in iView property and do not see any option to increase the number of rows.
please help
Thanks
-Michael

Hi Micheal,
Well, I am not really sure, if you could accomplish this using customizing, but I am sure that you can accomplish this using the JDI. Well, you can extract the application's source code using JDI and then change the required display rows property and republish it.
Am not really sure if this is suggestable method for this requirement,but it can be achieved using this JDI stuff.
Regards
<b>Raja Sekhar</b><i></i>

How to increase the number of rows to be displayed in BEx Web Analyzer

hi,
I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows of data at a time. How to increase the number of rows? do i need to any kind of settings?
pls reply.

Hi,
I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
<bi:BLOCK_COLUMNS_SIZE value="4" />
<bi:BLOCK_ROWS_SIZE value="17" />
Then just save, and ignore the error messages.
Message was edited by:
vind Reinsberg

How to increase the battery life of your N series ...

What I am about to post here is valid for any 3G phone or device regardless of model but it is particularly focused towards the N series devices and their power hogging features.
Your battery life is dependant on many many things. How often you take calls on the device, the condition of your battery, the features you use on the device and so on and on. Therefore it is impossible to say that by following the information in this post you will get x amount of days battery life, but it will get you more time out of the battery than you otherwise would have got.
So with that out the way, if your looking to increase your battery life then follow these tips and your battery should start looking a lot healthier.
First of all lets start with THE big one. The one that is going to save you the most juice. Switching 3G off.
Yep, you heard me right. Just by switching the 3G capability of your phone off you will add hours and hours to your battery life. How is this so? Allow me to explain...
Due to the rather poor delivery of 3G in the UK by the network operators, it is rare for any 3G phone to maintain a constant 3G signal. Instead you will find that the phone constantly flips between 3G and GSM mode (Keep an eye on your signal one day). Even those of you on Vodafone who probably have the best 3G network coverage will find this is the case.
Unfortunately, this constant flipping between the two modes sucks power from the battery like a vampire as it alters its reception state for the different modes and the constant flipping is..well...causing it do this constantly! It can sometimes even make your phone unavailable for calls for very brief periods as it trips from GSM to 3G and vice versa.
If you need to use 3G for video calls or whatever then I'm afraid your just going to have to live with this but if you don't (And lets face it few of us do) then you can switch 3G off and increase your battery life considerably.
To do this, go into the "Settings" application (Found in the menu somewhere, by default Nokia normally stick it in "Tools"), and then to the "Phone" tab. In there you will see an option that says "Network mode" and you have a choice of "GSM" or "Dual Mode" (I.e. UMTS and GSM). Set it to GSM and your phone will restart. Once it restarts it will be working in GSM with GPRS speeds only but really for most purposes this is fine.
You have now just extended your battery capability considerably. You can further extend it by going to the "Connection" tab, going into "Packet data" and changing it to "When needed" so it is not constantly checking for a data connection.
The second big change you can make is to turn your phones wifi scanning capability off. The last time I looked not all Nokia's phones that have wifi capability can have their wifi cards switched off entirely but if you can, turn it off except for when you need to use it. Wifi is a power hog.
The next big change you can make is to lower the screen brightness settings on your phone. The less bright your screen is the less power is being used to light it up. Nokia by default leave the screen brightness at something like 50%. Lowering this a bit more will conserve more juice. Before you do this though please consider the fact that lowering the brightness setting will have a big impact on your ability to see the screen clearly in sunny conditions although you will be fine in the dark as you can't lower the brightness that far.
To lower the brightness, go to the settings tool in your phone and into the display option (Hidden in a subcategory called "Personalisation" on the N95). It won't hurt to set the power saving time out to 1 minute and the backlight time out to 10 seconds while your here (Although these are the Nokia default so they should already be set to this).
Finally in regards to the screen, although they may look pretty, animated screensavers use more battery power than the standard blank screen with time and date so avoid them if you can.
It also helps to keep Bluetooth switched off until you need it although the power savings are minimal in comparison to the other changes but every little milliamp counts!
Using the above methods I generally get about 3 to 4 days with about 3 hours talktime on my N95 without using Bluetooth, GPS or anything like that (I might be able to get more but so far I have not paid attention to the battery state before I put it on charge). If I am on a long train journey I can get about 4 hours worth of full screen video and about 2 hours talktime over the period of about 24 hours before it needs a recharge. As I said at the start of the post your mileage will vary greatly depending on how you use your device.
Hope this helps.
Useful links: Phone firmware update | Nokia support site

02-May-200701:14 PM
bixby wrote:
no keffa it is a cop out from nokia
its not unfai as its a premium device with a premium price
the n95 battery is atrocious
dont change the post content as the title is 'How to increase the battery life of your N series device'
your talking about nokia phones specifically
the networks are not to blame
they do not make the handsets : Nokia do !!!!!!!!!!
I'm going to choose my words carefully here...
I would never deny the battery on the N95 is not really up to the job of powering the N95 with its power hungry features. To put the same battery into a phone that has WiFi, GPS and a large 320x240 screen, the same one that goes into the E65 which has comparatively nothing compared to it is a bit pants.
However at no point was I criticising them for the band hopping problem. I labelled the post as how to increase the battery life of your N series device because this is a board for the N series devices. It was a simple choice of wording and not intended to be cutting in any way and I did make a remark that the details would be true of any 3G device at the top of the post.
What I was trying to point out in my second post is that the constant band hopping the phone is being forced to do that is draining its battery so much more quicker than it would if it had a constant signal of one kind or another isn't quite Nokia's fault.
They build it to conform to a laid out specification for 3G. However if the network operators cannot be bothered to roll out their 3G infrastructure adequately enough that the phone can find and remain locked onto a 3G signal that is usable then what are Nokia to do other than offer you the capability to turn 3G off until you need it (Although note to Nokia: That **bleep** reboot the phone does when you do this is entirely unneeded and you know it).
Blaming Nokia for this would be like blaming the manufacturer of your radio for failing to pick up radio because the radio station does not have any transmitters within range of your radio's receiver.
Finally...this band hopping is exhibited by all 3G phones built by Samsung, Nokia, Sony Ericsson, etc, from their most budget 3G model to their priciest piece and is the reason that all phones with 3G capabilities have batteries that do not last for any respectable length of time because these phones are also having to band hop between 3G and GSM.
Finally the proof is in the pudding. Turn 3G off for a few days. See your battery improve. Then (Although admittedly this will be harder to do...mcuh harder) find an area where you get a fairly decent 3G signal constantly. Again, see your battery improve. Try it with a different 3G phone...different manufacturer even. The same will be true.
So I stand by my comment, the network operators and their woeful 3G rollout are the villains costing you a fair chunk of your battery and Nokia cannot be expected to mitigate this....but a better battery would be nice all the same...
Useful links: Phone firmware update | Nokia support site

How to increase the row and Column length of Bex query in EP Portal 7.3

Dear All,
Please let me know the process to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Please let settings to increase rows up 10000 and column 100 in one page.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to increase the performance of a report

can any body tell me how to increase the performance of a report?////
i have prepared a report to show the expense detail .I have used BSIS and BSAS table.
But whenever I am executing it is facing runtime error (TIME_OUT error ).
Moderator Message: Duplicate Post. Read my comments in your previous thread.
Edited by: kishan P on Nov 25, 2010 1:38 PM

Please SEARCH in SCN before posting.
Also post performance related issues here.

How to increase the iCal Alert Popup BOX height?

Similar Messages

Maybe you are looking for