How to increase the input gain within the program not just with hardware?

Im guessing its probably the simplest thing Ive just overlooked,but can you increase the gain within the program its self. Ive just been doing it with my interface and I cant always get the amount I want.Any help would be great.Thanks

As I understand, you'd like to record things louder than they appear on your audio interface input, don't you? This is not possible at all. But you can make it louder after recording and this can be done in several ways:
1. Move the fader up (you can add 6db this way)
2. Add the helper plugin Gain - this way you can add additional dbs
3. Add any EQ plugin, they always have a gain fader but remember, EQs usually add some colour to the sound even if no other parameters are altered.
The above were the ways to increase the voulme without altering the soundfile itself, the following alter the soundfile:
4. doubleclick the file and it will appear in the sample editor. Now you can use 'normalize' to max the volume, you can use 'audio energizer' to make it louder but also to change the character.
Hope this helps.
EDIT
If your audio interface has its own mixer which comes BEFORE the signal gets into your sequencer then you can increase the volume there. But I guess this is not your case.
Message was edited by: samplaire
Message was edited by: samplaire

Similar Messages

Help! iTunes has completely disappeared off my iPhone 4s, yes the program, not just the app, and all my music has gone! How can I get this back? Thanks!!

Help! iTunes has completely disappeared off my iPhone 4s. Yes the Program, not just the app! All my music has just vanished! How do I get this back!!
(p.s. I do suspect a deletion has occurred courtesy of my 4 year old nephew, some other stuff has gone too, but beats me how he deleted a whole program!!!)

Hi clorowan
I found the following information that may be helpful:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Alternatively, if your media was downloaded from the iTunes Store, you may be able to download it again free of charge:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M.

How to prevent the program not to skip the process when exception is genera

Hi, friends.
How to prevent the program not to skip the process when exception is generated?
For example, I am doing a process for 100 records. If the 15th record causes a Java Exception, I want to be able to skip it and continue processing the remaining 85 records.
How it is possible with Java Exception handling? Any sample code?
Thanks,
Jaykishan

[http://java.sun.com/docs/books/tutorial/essential/exceptions/]
while (there are more lines) {
try {
process the next line
catch (...) {
log the error
}[http://java.sun.com/docs/books/tutorial/essential/exceptions/]
You'll want to be careful about which exceptions you catch though. For instance, if there's an unchecked exception, like NullPointerException, it's a sign of a bug in your code. Continuing to process as if that bug weren't there is often a worse approach than just failing. In this particular case, however, as long as you log the exception and then followup by fixing the bug that caused it, it may be acceptable to continue trying to process the rest of the file, even if some lines bring out a bug in your code.

Replacing the Applications Icon in the Dock, not just with an Applications alias--two different things

There is at least one answer to my question posted here, except it's not quite accurate. I too accidentally yanked my Applications folder from the Dock (which, by the way, is very easy to do, so in the way is the Dock. It's just very easy to drag it or any other icon in the dock out accidentally while working in a another programs, most particularly perhaps while working furiously back and forth across the screen in a grahics program. And hiding the Dock doesn't help because one is constantly bumping the sides of the screen with the mouse. In fact, choosing to hide the Dock might make matters worse because one forgets it's there. That's what happened--I accidentally grabbed it and pulled it out.
I thought to put back an alias out of Finder and it works okay, but not like before. The old Applications icon wasn't just an alias (and I don't recall there being a shortcut symbol attached to the old Applications Icon). Now when I click on it I don't get the balloon that used to pop up dislaying all of my program as large icons. Instead I just get a Finder-style list of my applications such that it's harder to locate the program I want to use.
What I really want back is the old Icon that worked as it used to work and that installs with the orginal installation of Snow Leopard. Does anyone know how to get that one back? Thanks,

FYI - All Dock icons are aliases, however they don't show the curly arrow.
To view your folder contents as you wish, right-click on the icon and choose the view options -
"display as" 'folder' will just show the folder, 'Stack' will show the first application in the folder (usually Adress Book).
View contenta as - list or grid - no fan option when the Dock's at the side (as it sounds like yours is).
EDIT
Incidentally, if you've dragged an alias to the Dock instead of the actual folder from Finder, you now have an alias pointing to another alias pointing to the Applications folder.
Bit unnecesary.
Message was edited by: noondaywitch

How to increase the battery life of your N series ...

What I am about to post here is valid for any 3G phone or device regardless of model but it is particularly focused towards the N series devices and their power hogging features.
Your battery life is dependant on many many things. How often you take calls on the device, the condition of your battery, the features you use on the device and so on and on. Therefore it is impossible to say that by following the information in this post you will get x amount of days battery life, but it will get you more time out of the battery than you otherwise would have got.
So with that out the way, if your looking to increase your battery life then follow these tips and your battery should start looking a lot healthier.
First of all lets start with THE big one. The one that is going to save you the most juice. Switching 3G off.
Yep, you heard me right. Just by switching the 3G capability of your phone off you will add hours and hours to your battery life. How is this so? Allow me to explain...
Due to the rather poor delivery of 3G in the UK by the network operators, it is rare for any 3G phone to maintain a constant 3G signal. Instead you will find that the phone constantly flips between 3G and GSM mode (Keep an eye on your signal one day). Even those of you on Vodafone who probably have the best 3G network coverage will find this is the case.
Unfortunately, this constant flipping between the two modes sucks power from the battery like a vampire as it alters its reception state for the different modes and the constant flipping is..well...causing it do this constantly! It can sometimes even make your phone unavailable for calls for very brief periods as it trips from GSM to 3G and vice versa.
If you need to use 3G for video calls or whatever then I'm afraid your just going to have to live with this but if you don't (And lets face it few of us do) then you can switch 3G off and increase your battery life considerably.
To do this, go into the "Settings" application (Found in the menu somewhere, by default Nokia normally stick it in "Tools"), and then to the "Phone" tab. In there you will see an option that says "Network mode" and you have a choice of "GSM" or "Dual Mode" (I.e. UMTS and GSM). Set it to GSM and your phone will restart. Once it restarts it will be working in GSM with GPRS speeds only but really for most purposes this is fine.
You have now just extended your battery capability considerably. You can further extend it by going to the "Connection" tab, going into "Packet data" and changing it to "When needed" so it is not constantly checking for a data connection.
The second big change you can make is to turn your phones wifi scanning capability off. The last time I looked not all Nokia's phones that have wifi capability can have their wifi cards switched off entirely but if you can, turn it off except for when you need to use it. Wifi is a power hog.
The next big change you can make is to lower the screen brightness settings on your phone. The less bright your screen is the less power is being used to light it up. Nokia by default leave the screen brightness at something like 50%. Lowering this a bit more will conserve more juice. Before you do this though please consider the fact that lowering the brightness setting will have a big impact on your ability to see the screen clearly in sunny conditions although you will be fine in the dark as you can't lower the brightness that far.
To lower the brightness, go to the settings tool in your phone and into the display option (Hidden in a subcategory called "Personalisation" on the N95). It won't hurt to set the power saving time out to 1 minute and the backlight time out to 10 seconds while your here (Although these are the Nokia default so they should already be set to this).
Finally in regards to the screen, although they may look pretty, animated screensavers use more battery power than the standard blank screen with time and date so avoid them if you can.
It also helps to keep Bluetooth switched off until you need it although the power savings are minimal in comparison to the other changes but every little milliamp counts!
Using the above methods I generally get about 3 to 4 days with about 3 hours talktime on my N95 without using Bluetooth, GPS or anything like that (I might be able to get more but so far I have not paid attention to the battery state before I put it on charge). If I am on a long train journey I can get about 4 hours worth of full screen video and about 2 hours talktime over the period of about 24 hours before it needs a recharge. As I said at the start of the post your mileage will vary greatly depending on how you use your device.
Hope this helps.
Useful links: Phone firmware update | Nokia support site

02-May-200701:14 PM
bixby wrote:
no keffa it is a cop out from nokia
its not unfai as its a premium device with a premium price
the n95 battery is atrocious
dont change the post content as the title is 'How to increase the battery life of your N series device'
your talking about nokia phones specifically
the networks are not to blame
they do not make the handsets : Nokia do !!!!!!!!!!
I'm going to choose my words carefully here...
I would never deny the battery on the N95 is not really up to the job of powering the N95 with its power hungry features. To put the same battery into a phone that has WiFi, GPS and a large 320x240 screen, the same one that goes into the E65 which has comparatively nothing compared to it is a bit pants.
However at no point was I criticising them for the band hopping problem. I labelled the post as how to increase the battery life of your N series device because this is a board for the N series devices. It was a simple choice of wording and not intended to be cutting in any way and I did make a remark that the details would be true of any 3G device at the top of the post.
What I was trying to point out in my second post is that the constant band hopping the phone is being forced to do that is draining its battery so much more quicker than it would if it had a constant signal of one kind or another isn't quite Nokia's fault.
They build it to conform to a laid out specification for 3G. However if the network operators cannot be bothered to roll out their 3G infrastructure adequately enough that the phone can find and remain locked onto a 3G signal that is usable then what are Nokia to do other than offer you the capability to turn 3G off until you need it (Although note to Nokia: That **bleep** reboot the phone does when you do this is entirely unneeded and you know it).
Blaming Nokia for this would be like blaming the manufacturer of your radio for failing to pick up radio because the radio station does not have any transmitters within range of your radio's receiver.
Finally...this band hopping is exhibited by all 3G phones built by Samsung, Nokia, Sony Ericsson, etc, from their most budget 3G model to their priciest piece and is the reason that all phones with 3G capabilities have batteries that do not last for any respectable length of time because these phones are also having to band hop between 3G and GSM.
Finally the proof is in the pudding. Turn 3G off for a few days. See your battery improve. Then (Although admittedly this will be harder to do...mcuh harder) find an area where you get a fairly decent 3G signal constantly. Again, see your battery improve. Try it with a different 3G phone...different manufacturer even. The same will be true.
So I stand by my comment, the network operators and their woeful 3G rollout are the villains costing you a fair chunk of your battery and Nokia cannot be expected to mitigate this....but a better battery would be nice all the same...
Useful links: Phone firmware update | Nokia support site

How to increase the size of text boxes in FCPX without stretching the text inside?

How to increase the size of text boxes in FCPX without stretching the text inside?

There are two basic Title formats — I should say Layouts — available: Text (plain) and Paragraph. (The plain text version usually does not appear with the blue dot controls — those generally appear for the paragraph type control.)
If the Title is using a Paragraph layout, it's like having a mini version of Text Edit available inside FCPX. You can tell when you click on the text (when the title is selected) -- a rectangle will appear around the text like so:
double clicking on the text will give you the bounds controls which you can use to redefine the text area without distorting the text. Once selected, notice the button that appears in the top right corner of the canvas:
Pressing that will activate the ruler. You can right click on the ruler and add Tab Stops (left, right, center and decimal.)
So if the title uses paragraph formatting, you can create a very WYSIWYG type of display text (use the Text inspector to alter text selections within the paragraph bounds.)

How to increase the row height of the table in the smartform

Hi,
Can any one say,
How to increase the row height of the table in the smartform.
It is presently show the row width very small, i want to increase the row with of the table in the smartform.
Plase say how can we increase the row height in the smartform.

Hi Ravi,
In Smartforms , Select the Table and you can adjust the cell hieghts in OUTPUT OPTIONs TAB.
Reward points if that Helps.
Manish

How to increase the number of rows in Status Oveview iView in MSS?

Hi
We have implemented MSS and have a question regarding Status overview iview.
The standard status overview iview of the team workset has 5 rows and we have to scroll using the arrow buttons to select/view a request.
Now can anyone explain me how to increase the number of rows in this iview? Is this somthing that has to be accoplished through web dynpro customization?
I checked the options in iView property and do not see any option to increase the number of rows.
please help
Thanks
-Michael

Hi Micheal,
Well, I am not really sure, if you could accomplish this using customizing, but I am sure that you can accomplish this using the JDI. Well, you can extract the application's source code using JDI and then change the required display rows property and republish it.
Am not really sure if this is suggestable method for this requirement,but it can be achieved using this JDI stuff.
Regards
<b>Raja Sekhar</b><i></i>

How to increase the number of rows to be displayed in BEx Web Analyzer

hi,
I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows of data at a time. How to increase the number of rows? do i need to any kind of settings?
pls reply.

Hi,
I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
<bi:BLOCK_COLUMNS_SIZE value="4" />
<bi:BLOCK_ROWS_SIZE value="17" />
Then just save, and ignore the error messages.
Message was edited by:
vind Reinsberg

How to increase the row and Column length of Bex query in EP Portal 7.3

Dear All,
Please let me know the process to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Please let settings to increase rows up 10000 and column 100 in one page.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to increase the performance of a report

can any body tell me how to increase the performance of a report?////
i have prepared a report to show the expense detail .I have used BSIS and BSAS table.
But whenever I am executing it is facing runtime error (TIME_OUT error ).
Moderator Message: Duplicate Post. Read my comments in your previous thread.
Edited by: kishan P on Nov 25, 2010 1:38 PM

Please SEARCH in SCN before posting.
Also post performance related issues here.

How to increase the speed of video (avi file) using labview

How to increase the speed of video (.avi file) using labview? I have tried this by skiping alternate frames. also I have used minimum time delay.Is there any other option for which i can go?
please suggest me...........

Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

How to increase the size of bootcamp partition in macbook-late 2009

How to increase the size of the bootcamp partition in macbook late 2009, without using any third party softwares.

Pick yourself up by your own bootstrap too?
Reinstall after restoring to HFS only then.
You want something that works, then spend the $20 on Paragon CampTune or WinClone 3.

How to increase the width of Panel Tabbed layout

How to increase the width of detailed items of a Tabbed Panel ? I have many columns inside a detailed item of tabbed panel i can see only 3 colums ,to see the rest of the column i need to scroll. I tried to set the width but doesnt seems to be working
<af:panelTabbed id="pt2" inlineStyle="width:800.0px;">
<af:showDetailItem text="Interview" id="sdi1"
inflexibleHeight="50"
inlineStyle="width:800px; border-color:Aqua; border-width:thin;"
styleClass="AFStretchWidth">
Is there any way to increased the width of showDetailItem of panelTabbed ?
Thanks

Make sure the stretchChildren property of the shoDetailItem is set to first.

How to increase the performance in server 2008 R2 for RDP users

Hi,
My application take to much time to load. If anyone double click on mail client the exe file will appear in task manager but it will open after 5 mins. how to increase the performance.
My sever configuration is as below,
SC2600 Intel motherboard with total 24 core processors and 32 GB RAM and 8 TB Hard Disk. RAID 5 is configured which has two lungs one is 167 GB for C drive and other is 4.5 TB for D drive.
There are 28 Thin-clients connected to server through L300 N computing Thin-clients.
Thin-clients connect to V-space server installed in server for RDP users to get connected.
we have installed around 20 applications including printer and scanner driver. And apps are has below,
Firefox browser, windows mail, Adobe acrobat XI, canon printer and scanner drivers, Epson printer and scanner driver, E scan anti-virus, office 2007, v space, power ISO, win-rar,Tally and e token drivers and some backup software's.
Below are the services and features enabled,
AD, File services, RDP, web server, Hyper-v, .net frame work.
Is there a way to increase the performance .
Very slow performance.

Hi,
what would you suggest on hardware configuration must be for above mentioned applications and services with those many users.
how many cores and ram size is required.

How to increase the input gain within the program not just with hardware?

Similar Messages

Maybe you are looking for