How to increase the length limit of the text area ...
It's 2011 and I wanna send email through my phone. Hope that Nokia wake up and catch up with the present time. Looks like this phone hopes me to be content with 552 or so characters at a time. The characters just don't get entered after that limit. Is there a way to construct a longer message? Thanks in advance.
MODERATOR'S NOTE: This post has been edited. Inappropriate use of words are not allowed in this forum.
You state it's 2011 and they should catch up yet you buy a phone that was released in 2008?
Are you using the latest version of the nokia email software? Is your firmware up to date?
Perhaps you should rephrase your posts on this forum if you want anybody to put any serious effort into helping you. Edit - Looks like a moderator has rephrased it for you!
Similar Messages
-
How can I increase the character limit of my text messages for Droid Maxx 4.4?
How can I increase the character limit of my text messages for Droid Maxx 4.4?
Send as a MMS.
-
How do I set a limit to the number of registrants to an event form?
How do I set a limit to the number of registrants filling out an event form?
PLEASE add this feature. as far as I can tell there are no option out there that serve this need. FormAssembly, EmailMeForm, or FormsCentral. Think of how many customers would use this. Imagine a t-shirt company that pre-prints inventory, wouldn't they want to limit how many forms could be submitted that want a size L shirt? My business is participant based, like the evnt question above we need to limit the number of participants. Of course I could program my own solution, but then I would miss out on all the other cool FormsCentral features. Any chance this could be added right away if I sponsored it as a custom development?
-
How to increase field length?
How to increase field length?
path -> in T Code MM01 -> Additional Data ->Unit of mesure (tech name UMREZ)
default length is 5 digits i want increase 7 digits................HI,
I don't thing it is at all possible. Because your field is a standard one and the 3 available exits in MM01
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
can not help it.
Regards,
Anirban -
What is the temperature limit of the finger to work on iPhone touchscreen? I'm asking this, because I've noticed that when my finger gets too warm (about 104oF) the screen of my iPhone 5 doesn't recognize its touch. Thank you.
I understood. Emphasizing that this is still a guess, when you touch the screen it compares your fingerprint at that time to the one you originally recorded. The fact that the finger is warmer may have a small effect on the fingerprint making it appear different than the original colder one. Temperature differences cause things to expand and contract and that may be having an effect on the comparison. You could try recording a fingerprint after doing what you are doing and then see if it will be recognized when you do the same thing to log into the phone. I know that prior to iOS 7.1 for a few minutes after I would wash my hands the phone had difficulty recognizing the fingerprint. Don't know if it was temperature or moisture that caused the temporary change induced by the hand washing. That improved with version 7.1 I think.
-
Can you adjust the length of time the screen stays lit?
Can you adjust the length of time the screen stays lit?
but you can't lengthen it unfortunately.
Bear in mind, the screen is the largest consumer of power. -
From the RAM limit to the CORE limit...
I was thinking that Bidule (Plogue) is a good way to expand RAM Logic limit, but at the end it definetely shrinks to to be a way to add 2 or max 3 instruments to Logic possibilities (because of Rewire one core limit). If I use an Ivory and an Omnisphere plug I already get the Rewire core meter of Logic going near the top
(I have a 2x3 Intel Xeon Quad Core)
So, from the RAM limit to the CORE limit.....
And I think also that the hard criticised Spectrasonics Atmosphere and Trilogy plugins wrappers, now reveal very very useful for saving my Logic RAM expansion possibilities...
And about Logic 9..nothing mentioned on 64 bit support....If file size is the biggest concern, once you've cleared out
all items
you don't need any longer, try:
1. Doing a Save As, then a Save As again. Often, for whatever
reason,
this finally gets rid of old, unused objects.
2. Create a new project and import the existing project's
slides. This
can have the same effect.
In my experience, the first is better for reducing file sizes
and the
second is better for getting rid of any playback anomalies.
Otherwise, a better approach for what you're doing, again in
my
experience, would be to cut up the audio outside of Captivate
into one
file per slide (using a tool like Audacity), import them all
into the
library, then add each individually. That's our standard
process and
we've yet to experience these huge, bloated CP files (knock,
knock).
Erik
luke@nesc wrote:
> I have been using Captivate to imbed an audio recording
of a presentation into
> the slides for said presentation. The audio is in the
form of one large mp3
> file. When adding the audio, I select the option to
distribute over many files,
> and line up all the slides to the correct part of the
audio. If i need to edit
> the slide times or audio (this happens frequently
because captivate seems to be
> rather buggy when splitting up the single audio track
into one for each slide)
> the resulting Captivate Project file rockets in file
size. ....
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware -
How to increase 255 column limit in hyperion financial reporting studio
how to increase 255 column limit in hyperion financial reporting studio
Check this knowledge article :
Best Practices for Hyperion Financial Reporting (FR) Report Design [ID 1196695.1] -
To Extend the length/character in the text column in FBCJ
Hi Experts,
Is there any way to extend the length/character in the text column in FBCJ? If yes then kindly revert me back as soon as possible. My Client needs more characters then the exist one..
Thanks in AdvanceHi
You have two text fields
Addit .text1 with 100 length
Addit text2 with 30 length
If you still need more ask your abaper to check table ISCJ_E_POSTINGS with field text100 and text30
Srinivas -
My wife switched from an iPhone 4 to an iPhone 5. Everything transferred over and service is on the new phone. However, texts are going to her old phone still. Any idea what the problem is?
As long as iMessage is enabled and the old phone is connected to a WiFi access point, it will continue to receive iMessage texts. It won't receive non-iMessage texts nor will it receive any calls.
-
How can I increase the hard limit of the stack size?
Hi,
My process gives an error of segmentation fault (SIGSEGV) that is caused because the stack limit is reached. I have a doubt about how to increase the stack size. I have tried change it with "ulimit - hard" but this size is 65532kb, and is very low for my process. How can I increase the hard limit?
Thanks.When last I checked, the kernel had a fixed stack size limit.
Do you have the source code to this application? If so, [see this Tiger stack size article|http://homepage.mac.com/eric.c/hpc/contents/documentation/How%20to%20in crease%20the%20stack%20size%20on%20Mac%20OS%20X.pdf], and specifically have a look at the +ld -stack_size+ mechanism; rebuild the code with a bigger limit.
Entirely FWIW, this question would be more typical over in the developer forums or maybe in the Unix forum if you don't have Apple developer access. Better audience for application development and for software-related questions over there. -
How to change the Max limit in the Ring
Hi all,
I am try to use a Ring to set up 4 different of Freq form 18Hhz to 20Ghz but the ring Max limit only 65535. How could I change the max limit? Or any way we could set up 4 diffirence Freq number for user select any one they want to use.
Thank you
Solved!
Go to Solution.you could use a case structure and wire your ring control to it and then send the frequency you from the case structure
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome -
Need to increase the length of radiobutton label text
Hi All,
I have a requirement wherein i need to make a selection screen with radiobuttons. The text that i need to put with radiobuttons as label is about 120 chars. But it is giving me an error that the text could not be more than 79 chars.
Is there any way i can increase this length, so that i can write a text (as radiobutton label) of about 120 chars in a single line?
Thanks in advance...Hi
do like this..
SELECTION-SCREEN BEGIN OF line.
PARAMETERS rb_nil RADIOBUTTON GROUP gupd.
SELECTION-SCREEN COMMENT 3(42) comm MODIF ID mod. "text-com.
SELECTION-SCREEN end of LINE.
think you can give till 60 and above... -
Cable length limit on the so-called "Internet" port?
Is there a limit on the cable-length when connecting an Ethernet cable to the so-called "Internet" port on a WRT54G router?
I assume this is a standard 10/100 Ethernet port, since I am connecting this to the Ethernet port of my DSL modem. Since the Ethernet standard defines a maximum cable-length of 100 meters when connecting any 2 Ethernet devices, I should be able to use a cable up to this length when connecting 2 Linksys routers together.
Here is what I want to do:
DSL Modem-->Linksys Router-->Linksys Router
My first Linksys WRT54G router is connected to a DSL modem. I want to put a second WRT54G Linksys router in a different building, and connect them with a 100 meter Ethernet cable, connecting the remote end to the second router´s "Internet" port, and the other end into one of the first router´s available 10/100 ports. This will allow me to create 2 wireless signals, with 2 different DHCP scopes and 2 different SSID´s, basically allowing me to extend the range, with the 2 routers connected with a physical wire.
This works when connecting them with a short, 2 meter cable. Using a short cable I am able to associate with the second router´s SSID, get a DHCP address from that router, and then turn on RIP on both routers and have traffic route from the second router to the first one and out to the Internet successfully.
However, when I replace the short cable with a longer one, either 80 meters or 100 meters, I don´t get a link light between the routers. I do get a link light if I connect to a 10/100 port on both routers, but RIP doesn´t seem to want to exchange routes on the second router out anything other than the "Internet" port. Moving the cable back to the "Internet" port fails to produce a link light (unless I use a really short cable, which does produce a link light).
So my question is this: from a Layer-1 perspective, is the "Internet" port an Ethernet port that enforces a cable-length limit that doesn`t follow the standard 100 meter rule?
--- Christerwell..the internet port is definitely an ethernet port...however, it is not supposed to limit the cable length .. try a 50 m cable and check whether it works...because my friend had a similar kind of an issue and it worked fine with a 50 m ethernet cable ..
-
How can u get the Length of a file u are going to download?
HI,<br>
I have another question, is it possible that u can get the length of a file which u are just going to download?<br>
<br>
I have the following code example:<br>
<br>url = new URL(dlfrom);<br>
f=new File(url.toURI());<br>
System.out.println(f.length)();<br><br>
unfortunatly it keeps throwing an exception, please help.RTFM
http://java.sun.com/j2se/1.5.0/docs/api/java/net/URLCo
nnection.html#getContentLength()<br>
I tried to apply your sollution, but it is allways returning -1, so what should I do now, is there any possebility still to get the length of the object, because i thought of doing something similar as a tool to download stuff
Maybe you are looking for
-
Deskjet 3050 not connecting to my wifi network
Accidentally pressed Restore Default and my printer will not connect to my wifi network. How do reinstall it please?
-
I can't read or download books all so says can't connect to iTunes
I Can't read any book or download any new ones its also saying can't connect to iTunes please help
-
Hi in zone: bash-3.00# reboot [NOTICE: Zone rebooting] SunOS Release 5.10 Version Generic_144488-17 64-bit Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. Hostname: dbspfox1 Reading ZFS config: done. Mounting ZFS filesyst
-
No Contacts Sync in 10.9.3
Mavericks 10.9.3 supposedly adds back the ability to sync contacts and calendars between a Mac and iOS device using a USB connection that was being forced through iCloud in previous versions of Mavericks. Well, after waiting for this functionality to
-
HOW to remove myself from a friend who is group texting?
OMG. My friend started a group texting conversation at 7:20 this morning and included me in it. Now i'm getting everyone's replies and my phone is going off, of course. Please.... how do i remove myself from this series of text messages? (without ha