How to increase the no of rows in excel to accomdate the result area

Hi experts,
               When i am trying to execute a query the following message is been generated after some execution time.
Maximum number of rows (65535) exceeded. Result is incomplete.
Is there any way to increase the no of rows  so that the results can be displayed or any other solution.
Thanks,
Sandeep

I think you are using BW3.5, which has this limit.
In BI7, the limit is around 1 million rows.
I do not think it is possible to increase this limit. Its Excel 2003 limit. You can remove some characterstics from query drilldown and then display the result.
Edited by: Pravender on Apr 21, 2010 1:19 PM

Similar Messages

  • How to increase the row height of the table in the smartform

    Hi,
    Can any one say,
    How to increase the row height of the table in the smartform.
    It is presently show the row width very small, i want to increase the row with of the table in the smartform.
    Plase say how can we increase the row height in the smartform.

    Hi Ravi,
         In Smartforms , Select the Table and you can adjust the cell hieghts in OUTPUT OPTIONs TAB.
        Reward points if that Helps.
    Manish

  • How to increase the number of rows in Status Oveview iView in MSS?

    Hi
    We have implemented MSS and have a question regarding Status overview iview.
    The standard status overview iview of the team workset has 5 rows and we have to scroll using the arrow buttons to select/view a request.
    Now can anyone explain me how to increase the number of rows in this iview? Is this somthing that has to be accoplished through web dynpro customization?
    I checked the options in iView property and do not see any option to increase the number of rows.
    please help
    Thanks
    -Michael

    Hi Micheal,
    Well, I am not really sure, if you could accomplish this using customizing, but I am sure that you can accomplish this using the JDI. Well, you can extract the application's source code using JDI and then change the required display rows property and republish it.
    Am not really sure if this is suggestable method for this requirement,but it can be achieved using this JDI stuff.
    Regards
    <b>Raja Sekhar</b><i></i>

  • How to increase the number of rows to be displayed in BEx Web Analyzer

    hi,
    I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows  of data at a time. How to increase the number of rows? do i need to any kind of settings?
    pls reply.

    Hi,
    I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
    <bi:BLOCK_COLUMNS_SIZE value="4" />
    <bi:BLOCK_ROWS_SIZE value="17" />
    Then just save, and ignore the error messages.
    Message was edited by:
            vind Reinsberg

  • How to increase the row and Column length of Bex query in EP Portal 7.3

    Dear All,
    Please let me know the process  to Increase the Rows and Columns  Size of Bex Query in Enterprise Portal  of SAP  7.3 .
    Please  let settings to increase rows up 10000 and column 100 in one page.
    Thanks
    Regards,
    Sai

    Dear All,
    Please find the attached screen shot.
    The report be open with 4 or 5 columns and 5 or 6 rows.
    So, please  let me know how to increase the length of the table.
    Do the needful for me to over come this issue.
    Thanks
    Regards,
    Sai.

  • How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal  of SAP  7.3

    Dear All,
    Please let me know the process how to Increase the Rows and Columns  Size of Bex Query in Enterprise Portal  of SAP  7.3 .
    Currently I am getting Only  4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100  and row length more than 10000.
    Please suggest me a suitable solution to over come this issue.
    Please find the Below screen shot.
    Thanks
    Regards,
    Sai

    Dear All,
    Please find the attached screen shot.
    The report be open with 4 or 5 columns and 5 or 6 rows.
    So, please  let me know how to increase the length of the table.
    Do the needful for me to over come this issue.
    Thanks
    Regards,
    Sai.

  • How to increase the width of the column in Tableview

    Hi ALL,
    How to increase the width of the column in tableview?I have name column where big name is displaying in rows.Does any one have any idea how to increase the width of the column dynamically in tableview.Please respond its little urgent.
    Thanks in advance

    Hi Peter,
    Here is my Dynpage
    package com.ust.jcatotable;     
    import java.awt.Event;
    import javax.resource.cci.MappedRecord;
    import javax.resource.cci.RecordFactory;
    import com.sapportals.connector.connection.IConnection;
    import com.sapportals.connector.execution.functions.IInteraction;
    import com.sapportals.connector.execution.functions.IInteractionSpec;
    import com.sapportals.connector.execution.structures.IRecordSet;
    import com.sapportals.htmlb.DropdownListBox;
    import com.sapportals.htmlb.event.TableNavigationEvent;
    import com.sapportals.htmlb.page.DynPage;
    import com.sapportals.htmlb.page.PageException;
    import com.sapportals.portal.htmlb.page.JSPDynPage;
    import com.sapportals.portal.htmlb.page.PageProcessorComponent;
    import com.sapportals.portal.ivs.cg.ConnectionProperties;
    import com.sapportals.portal.ivs.cg.IConnectorGatewayService;
    import com.sapportals.portal.ivs.cg.IConnectorService;
    import com.sapportals.portal.prt.component.IPortalComponentContext;
    import com.sapportals.portal.prt.component.IPortalComponentProfile;
    import com.sapportals.portal.prt.component.IPortalComponentRequest;
    import com.sapportals.portal.prt.component.IPortalComponentResponse;
    import com.sapportals.portal.prt.runtime.PortalRuntime;
    public class Display extends PageProcessorComponent {
      public DynPage getPage(){
         return new DisplayDynPage();
    public static class DisplayDynPage extends JSPDynPage{
         private Object formatFlag;
         public static IConnection connection ;
         private IPortalComponentRequest request;
         private IPortalComponentContext context;
         private IPortalComponentProfile profile;
         private IPortalComponentResponse  response;
         private int visibleRow=1;
         TableBean myBean;
         public void doInitialization(){
                   response = (IPortalComponentResponse) this.getResponse();
                   request = (IPortalComponentRequest) this.getRequest();
                    context = request.getComponentContext();
                    profile = context.getProfile();
                    IPortalComponentProfile profile = context.getProfile();
                    Object o = context.getValue("myBean");
                    if(o==null || !(o instanceof TableBean)){
                       myBean = new TableBean();
                       setBeanFromProfile(profile, myBean);
                       context.putValue("myBean",myBean);
                     }else {
                       setBeanFromProfile(profile, myBean);
                        myBean = (TableBean) o;
                    this.getData();
         public void myOnNavigate(Event event) throws PageException{
              TableNavigationEvent tne = (TableNavigationEvent) event;
              this.visibleRow = tne.getFirstVisibleRowAfter();
              if(myBean!=null)
              myBean.setVisibleRow(new Integer(this.visibleRow).toString());

  • How to increase the number of characters in Text Edit??

    Hi,
      How to increase the number of characters we enter in the Text Edit, for example i can't enter not more than 255 characters. If to enter upto 500 char, what to do.
    Thanks and regards,
    Karthik

    We can't restrict the number of characters a UI element can take. Rows and columns properties are to specify the visible no of rows and columns.
    If u want a restriction in the number of characters you have to create a simple type and set it to a context attribute and then map it to the text view.

  • How to increase the the max limit column in pivot view in BIEE 11G?

    Hi Experts,
    How to increase the the max limit column in pivot view in BIEE 11G?
    When the number of column exceed 256 in pivot view, it will generate the following error message as below:
    Exceeded configured maximum number of allowed output prompts, sections, rows, or columns.
    Error Details
    Error Codes: IRVLJWTA:OI2DL65P
    Location: saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
    SQL Issued: 13678~vid1ptgt0v5ubh39gesnauuhl6
    For example:
    ----------------Day
    Country-----20120101---20120102---..........20121231
    China--------10000---------20000----......

    Try increasing the Max Rows in Instanceconfig.xml
    Path:-Middleware\instances\instance1\bifoundation\OracleBIPresentationServices\instanceconfig.xml
    <ServerInstance>
    <Views>
    <Pivot>
    <MaxVisibleColumns>300</MaxVisibleColumns>
    <MaxVisiblePages>1000</MaxVisiblePages>
    <MaxVisibleRows>500</MaxVisibleRows>
    <MaxVisibleSections>25</MaxVisibleSections>
    <DefaultRowsDisplayed>30</DefaultRowsDisplayed>
    </Pivot>
    </Views>
    </ServerInstance>
    Try adding this in the config file and restart the services.
    Mark as correct if it is helpful.
    Thanks.

  • How to increase the width of the Crystal Report

    Hello All
    How to increase the width of the Crystal report template in the CR designer in .NET 2005 editor ?
    I need to design a report which has to accomodate more number of columns.So achieve that i need to redesign the report having more width.
    CrystalReports version 10.2.3600.0
    Thanks in advance
    Srivatsa

    HI Srivatsa,
    You can make a wider report by creating virtual pages. Virtual pages are the extra pages to the right of the main page that get created to accommodate cross-tabs that are wider than a single page. By inserting a cross-tab in a report then suppressing it, you can create a report that is multiple pages wide.
    Insert and Suppress a Cross-Tab
    1. On the 'Insert' menu, click 'Cross-Tab'.
    2. In the Cross-Tab Expert, click any field and move it into the 'Columns' box, and click any field and move it into the 'Summarized Fields' box. Do not move any fields into the 'Rows' box.
    3. Click the 'Customize Style' tab and select the following check boxes:
    " Suppress Empty Rows
    " Suppress Empty Columns
    " Suppress Row Grand Totals
    " Suppress Column Grand Totals
    4. Click the 'OK' button and then insert the cross-tab into the Report Header section.
    5. On the 'Report' menu, click 'Format Sections'. Click 'Report Header' and select the 'Underlay Following Sections' check box.
    When you run the report you will not see the cross-tab, but you will be able to scroll to the right and see multiple virtual pages.
    ====================
    NOTES:
    " As there are no rows to the Cross-Tab, it does not carry on to Page 2 and the virtual pages do not appear past the first page.
    " To increase or decrease the number of virtual pages do one of the following:
    - Limit the number of records for the field in the 'Column' box of the 'Cross-Tab Expert' using the 'Select Expert'.
    - Change the width of the 'Column' field in the Cross-Tab by moving the edges of the field.
    ====================
    How to Insert Fields on Virtual Pages
    You cannot drag-and-drop a field onto a virtual page, you can only do so on the main page. To get a field to appear on a virtual page:
    1. Insert the field on the main page.
    2. Click the 'Preview' tab.
    3. Drag the right edge of the field to the right, onto the virtual page.
    4. Drag the left edge of the field to the right, onto the virtual page.
    Hope this helps!!
    Regards,
    Shweta

  • How to increase the battery life of your N series ...

    What I am about to post here is valid for any 3G phone or device regardless of model but it is particularly focused towards the N series devices and their power hogging features.
    Your battery life is dependant on many many things. How often you take calls on the device, the condition of your battery, the features you use on the device and so on and on. Therefore it is impossible to say that by following the information in this post you will get x amount of days battery life, but it will get you more time out of the battery than you otherwise would have got.
    So with that out the way, if your looking to increase your battery life then follow these tips and your battery should start looking a lot healthier.
    First of all lets start with THE big one. The one that is going to save you the most juice. Switching 3G off.
    Yep, you heard me right. Just by switching the 3G capability of your phone off you will add hours and hours to your battery life. How is this so? Allow me to explain...
    Due to the rather poor delivery of 3G in the UK by the network operators, it is rare for any 3G phone to maintain a constant 3G signal. Instead you will find that the phone constantly flips between 3G and GSM mode (Keep an eye on your signal one day). Even those of you on Vodafone who probably have the best 3G network coverage will find this is the case.
    Unfortunately, this constant flipping between the two modes sucks power from the battery like a vampire as it alters its reception state for the different modes and the constant flipping is..well...causing it do this constantly! It can sometimes even make your phone unavailable for calls for very brief periods as it trips from GSM to 3G and vice versa.
    If you need to use 3G for video calls or whatever then I'm afraid your just going to have to live with this but if you don't (And lets face it few of us do) then you can switch 3G off and increase your battery life considerably.
    To do this, go into the "Settings" application (Found in the menu somewhere, by default Nokia normally stick it in "Tools"), and then to the "Phone" tab. In there you will see an option that says "Network mode" and you have a choice of "GSM" or "Dual Mode" (I.e. UMTS and GSM). Set it to GSM and your phone will restart. Once it restarts it will be working in GSM with GPRS speeds only but really for most purposes this is fine.
    You have now just extended your battery capability considerably. You can further extend it by going to the "Connection" tab, going into "Packet data" and changing it to "When needed" so it is not constantly checking for a data connection.
    The second big change you can make is to turn your phones wifi scanning capability off. The last time I looked not all Nokia's phones that have wifi capability can have their wifi cards switched off entirely but if you can, turn it off except for when you need to use it. Wifi is a power hog.
    The next big change you can make is to lower the screen brightness settings on your phone. The less bright your screen is the less power is being used to light it up. Nokia by default leave the screen brightness at something like 50%. Lowering this a bit more will conserve more juice. Before you do this though please consider the fact that lowering the brightness setting will have a big impact on your ability to see the screen clearly in sunny conditions although you will be fine in the dark as you can't lower the brightness that far.
    To lower the brightness, go to the settings tool in your phone and into the display option (Hidden in a subcategory called "Personalisation" on the N95). It won't hurt to set the power saving time out to 1 minute and the backlight time out to 10 seconds while your here (Although these are the Nokia default so they should already be set to this).
    Finally in regards to the screen, although they may look pretty, animated screensavers use more battery power than the standard blank screen with time and date so avoid them if you can.
    It also helps to keep Bluetooth switched off until you need it although the power savings are minimal in comparison to the other changes but every little milliamp counts!
    Using the above methods I generally get about 3 to 4 days with about 3 hours talktime on my N95 without using Bluetooth, GPS or anything like that (I might be able to get more but so far I have not paid attention to the battery state before I put it on charge). If I am on a long train journey I can get about 4 hours worth of full screen video and about 2 hours talktime over the period of about 24 hours before it needs a recharge. As I said at the start of the post your mileage will vary greatly depending on how you use your device.
    Hope this helps.
    Useful links: Phone firmware update | Nokia support site

    02-May-200701:14 PM
    bixby wrote:
    no keffa it is a cop out from nokia
    its not unfai as its a premium device with a premium price
    the n95 battery is atrocious
    dont change the post content as the title is 'How to increase the battery life of your N series device'
    your talking about nokia phones specifically
    the networks are not to blame
    they do not make the handsets : Nokia do !!!!!!!!!!
    I'm going to choose my words carefully here...
    I would never deny the battery on the N95 is not really up to the job of powering the N95 with its power hungry features. To put the same battery into a phone that has WiFi, GPS and a large 320x240 screen, the same one that goes into the E65 which has comparatively nothing compared to it is a bit pants.
    However at no point was I criticising them for the band hopping problem. I labelled the post as how to increase the battery life of your N series device because this is a board for the N series devices. It was a simple choice of wording and not intended to be cutting in any way and I did make a remark that the details would be true of any 3G device at the top of the post.
    What I was trying to point out in my second post is that the constant band hopping the phone is being forced to do that is draining its battery so much more quicker than it would if it had a constant signal of one kind or another isn't quite Nokia's fault.
    They build it to conform to a laid out specification for 3G. However if the network operators cannot be bothered to roll out their 3G infrastructure adequately enough that the phone can find and remain locked onto a 3G signal that is usable then what are Nokia to do other than offer you the capability to turn 3G off until you need it (Although note to Nokia: That **bleep** reboot the phone does when you do this is entirely unneeded and you know it).
    Blaming Nokia for this would be like blaming the manufacturer of your radio for failing to pick up radio because the radio station does not have any transmitters within range of your radio's receiver.
    Finally...this band hopping is exhibited by all 3G phones built by Samsung, Nokia, Sony Ericsson, etc, from their most budget 3G model to their priciest piece and is the reason that all phones with 3G capabilities have batteries that do not last for any respectable length of time because these phones are also having to band hop between 3G and GSM.
    Finally the proof is in the pudding. Turn 3G off for a few days. See your battery improve. Then (Although admittedly this will be harder to do...mcuh harder) find an area where you get a fairly decent 3G signal constantly. Again, see your battery improve. Try it with a different 3G phone...different manufacturer even. The same will be true.
    So I stand by my comment, the network operators and their woeful 3G rollout are the villains costing you a fair chunk of your battery and Nokia cannot be expected to mitigate this....but a better battery would be nice all the same...
    Useful links: Phone firmware update | Nokia support site

  • How to increase the performance of a report

    can any body tell me how to increase the performance of a report?////
    i have prepared a report to show the expense detail .I have used BSIS and BSAS table.
    But whenever I am executing it is facing runtime error (TIME_OUT error ).
    Moderator Message: Duplicate Post. Read my comments in your previous thread.
    Edited by: kishan P on Nov 25, 2010 1:38 PM

    Please SEARCH in SCN before posting.
    Also post performance related issues here.

  • How to increase the size of text boxes in FCPX without stretching the text inside?

    How to increase the size of text boxes in FCPX without stretching the text inside?

    There are two basic Title formats — I should say Layouts — available:  Text (plain) and Paragraph.  (The plain text version usually does not appear with the blue dot controls — those generally appear for the paragraph type control.)
    If the Title is using a Paragraph layout, it's like having a mini version of Text Edit available inside FCPX. You can tell when you click on the text (when the title is selected) -- a rectangle will appear around the text like so:
    double clicking on the text will give you the bounds controls which you can use to redefine the text area without distorting the text. Once selected, notice the button that appears in the top right corner of the canvas:
    Pressing that will activate the ruler. You can right click on the ruler and add Tab Stops (left, right, center and decimal.)
    So if the title uses paragraph formatting, you can create a very WYSIWYG type of display text (use the Text inspector to alter text selections within the paragraph bounds.)

  • How to increase the speed of video (avi file) using labview

    How to increase the speed of video (.avi file) using labview? I have  tried this by skiping alternate frames. also I have used  minimum time delay.Is there  any other option for which i can go?
    please suggest me........... 

    Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
    Matthew Fitzsimons
    Certified LabVIEW Architect
    LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

  • How to increase the size of bootcamp partition in macbook-late 2009

    How to increase the size of the bootcamp partition in macbook late 2009, without using any third party softwares.

    Pick yourself up by your own bootstrap too?
    Reinstall after restoring to HFS only then.
    You want something that works, then spend the $20 on Paragon CampTune or WinClone 3.

  • How to increase the width of Panel Tabbed layout

    How to increase the width of detailed items of a Tabbed Panel ? I have many columns inside a detailed item of tabbed panel i can see only 3 colums ,to see the rest of the column i need to scroll. I tried to set the width but doesnt seems to be working
    <af:panelTabbed id="pt2" inlineStyle="width:800.0px;">
    <af:showDetailItem text="Interview" id="sdi1"
    inflexibleHeight="50"
    inlineStyle="width:800px; border-color:Aqua; border-width:thin;"
    styleClass="AFStretchWidth">
    Is there any way to increased the width of showDetailItem of panelTabbed ?
    Thanks

    Make sure the stretchChildren property of the shoDetailItem is set to first.

Maybe you are looking for