How to increase the number of data Business Object can pull for a report?

Hi,
I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
Thanks

Bobby,
   to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system  SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti.

Similar Messages

  • How to increase the number of rows to be displayed in BEx Web Analyzer

    hi,
    I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows  of data at a time. How to increase the number of rows? do i need to any kind of settings?
    pls reply.

    Hi,
    I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
    <bi:BLOCK_COLUMNS_SIZE value="4" />
    <bi:BLOCK_ROWS_SIZE value="17" />
    Then just save, and ignore the error messages.
    Message was edited by:
            vind Reinsberg

  • How to increase the number of rows in Status Oveview iView in MSS?

    Hi
    We have implemented MSS and have a question regarding Status overview iview.
    The standard status overview iview of the team workset has 5 rows and we have to scroll using the arrow buttons to select/view a request.
    Now can anyone explain me how to increase the number of rows in this iview? Is this somthing that has to be accoplished through web dynpro customization?
    I checked the options in iView property and do not see any option to increase the number of rows.
    please help
    Thanks
    -Michael

    Hi Micheal,
    Well, I am not really sure, if you could accomplish this using customizing, but I am sure that you can accomplish this using the JDI. Well, you can extract the application's source code using JDI and then change the required display rows property and republish it.
    Am not really sure if this is suggestable method for this requirement,but it can be achieved using this JDI stuff.
    Regards
    <b>Raja Sekhar</b><i></i>

  • How to increase the number of files picked up by File adaptor

    Dear all,
    Can any one tell me how to increase the number of files picked up by File adapter.
    Pl post ASAP.
    Useful answers will be appreciated accordingly.
    Thanks,
    Srinivas

    Hi Srinivasa,
    there is no parameter for number of files to be picked..............if you have too many source files and you want to get them processed quickly, then you can specify a very small polling interval, then XI will pick your source files quickly..........but it will cause heavy load on the XI system which can lead to blockage of messages in queues........
    Regards,
    Rajeev Gupta

  • How to increase the number of characters in Text Edit??

    Hi,
      How to increase the number of characters we enter in the Text Edit, for example i can't enter not more than 255 characters. If to enter upto 500 char, what to do.
    Thanks and regards,
    Karthik

    We can't restrict the number of characters a UI element can take. Rows and columns properties are to specify the visible no of rows and columns.
    If u want a restriction in the number of characters you have to create a simple type and set it to a context attribute and then map it to the text view.

  • How to increase the number of HTTP Worker Threads?

    Hi Buddy,
    I am using the lateset NW AS Java. It's a DEV system and the number of HTTP Worker Threads is 5.
    Do you know how to increase the number?
    What is the number in a Production System?
    Thank you!

    Parameter name: FCAServerThreadCount
    It's under Service->http.
    Use config tool for NW70.
    For NW71 and above use NWA and config tool.
    Also refer this -
    http://wiki.sdn.sap.com/wiki/display/JSTSG/%28JSTSG%29%28Web%29FAQ-FCAServerThreadCount

  • How could increase the number of waiting request queue?

    how could increase the number of waiting request queue?
    thanks,

    I assume you're asking because you're getting connection refused exceptions? Set the AcceptBacklog parameter in the config.xml/via the console. Here's a description of the parameter:
    http://e-docs.bea.com/wls/docs81/config_xml/Server.html#AcceptBacklog

  • How to call the method of a Business Object?

    Hi,
    Can someone guide me how to call the method of a business object?
    For example, I want to use the method SalesDocument.Copy of the Business Object VBAK. How can I do that? If you are familiar with any similar scenario please help.
    Regards,
    Renjith Michael.

    Hi
    double click on the copy  and
    go to abap tab
    there u can get functionmodule name
    u can call that
    Rewards if helpful

  • How to limit the number of pages a PDF can print?

    Hi,
    Does anyone know how to lime the number of pages a PDF can print? For example, if a PDF has 100 pages, it only allow the user to print no more than 100 pages.
    Any software can achieve this ?

    But once I purchased a ebook, which required be opened with Adobe digital edition, the ebook only allow to print 57 pages out of 300+ pages total. 
    Are there any way to convert a PDF to a ebook and encrypted by the printing limits?

  • How to increase the number of processes taken for loading data?

    Hi,
    While loading data from R/3 to BW, we found that the particular load is taking 2 processes to load data into Cube.
    Is there anyway to increase the number to 4 ?
    Thanks in advance.
    Bobby.

    Bobby,
       to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
    in order to check the setting in source system  SBIW--> General Settings --> Control Parameters for Data Transfer.
    we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
    All the best.
    Regards,
    Nagesh Ganisetti.

  • How to increase the number of scrollable shell/terminal lines?

    Hi guys,
    I've just run "pacman -Syu" and got hundreds of error lines. When I tried to scroll up to the first one by pressing "shift-pageup" I noticed, that I could only go back a couple of lines. So apparently my terminal "forgot" the first few lines.
    How can I increase the number of "history lines" (no, I do not mean the bash command history) in my terminal? I'm not using any terminal emulator like xterm. I have no GUI installed on that box. It's just the normal virtual console I'm talking about.
    Thanks a lot in advance,
    Blackhole

    dschrute wrote:
    From what I've read, the standard config uses your vga card's memory, and is pretty limited in how much it can be changed.  I have seen it sugested that using less virtual consoles might give you more of a scrollback, but I can't confirm that.
    There is also a somewhat new option with 2.6 kernels for "Soft Scrolback" that uses system RAM rather than VGA ram.  This is a kernel, compile time option so if it isn't enabled by default in Arch, you'd have to recompile your kernel with it turned on.  Google "console soft scrollback" or VGACON_SOFT_SCROLLBACK for more info.
    Thanks a lot. I didn't expect it to be so difficult. I thought there would be some config file somewhere. Can't the shell/bash itself do the soft scrollback out of the box?

  • How to increase the number of access to a list

    Hi,
    I have a list with many numbers, for example [234, 235, 236, 237 .....]. If I want access to  the first value of the list I can use for example the command: "put MyList [1]" and I get 234.
    Now I need to have a script that increases the number in square brackets of "MyList" by one unit (MyList[2]; MyList [3] etc..) in order to obtain 235, 236 etc.. If I use the command "setAt" or  "MyList [1] = MyList [1] + 1",  with "put MyList" I get the value 2, 3 etc.. and not 235, 236 ... that I need.
    What might be the way to the solution?
    Thanks.

    Thanks a lot Production Monkey for your reply,
    If I use "MyList = MyList + 1", if my list is equal to the following for example: [0, 11, 123, 234, 6443], the result will be: [1, 11, 123 234, 6443], but it is not what I want. I try to be more clear.
    MyList = [224, 336, 445, 224, 779 etc ...]
    Now, without changing the values of "MyList", I need to access the first, second, third .... etc value.
    The first hypothesis might be:
    MyList [1] (I obtain the value 224 and it is good)
    MyList [2] (I obtain the value 336 and it is good)
    MyList [3] (I obtain the value 445 and it is good)
    etc. .........
    but the list is very long and change, I would like a script, for example "on mouseUp me" to increase (not the value of the first list [224.336 etc]) but only the single value inside the brackets for example: MyList [4], MyList [5], MyList [6], MyList [7] ... [8] ... [9] and so on.
    How can I do?
    I apologize for my bad English.

  • How to find the number of data items in a file written with ArryToFile function?

    I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
    If you are young work to Learn, not to earn.
    Solved!
    Go to Solution.

    What about:
    OpenFile ( your file );
    cnt = 0;
    while ((br = ReadLine ( ... )) != -2) {
    if (br == -1) {
    // I/O error: handle it!
    break;
    cnt++;
    CloseFile ( ... );
    There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
    After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to increase the number of rows in a jTable dynamically?

    Can anyone help me in increasing the number of rows in a jTable dynamically without using DefaultTableModel?
    I don't want to use DefaultTableModel because my program is about to finish except this problem.
    Thanks in advance.

    Presumably you're using your own custom table model class. Modify that so that it returns the number of rows you want. Though presumably it would do this anyway so I've no idea what the problem is.
    Do you mean you've added rows to the table model but they're not being reflected in the table itself? You need to fire events - AbstractTableModel provides simple methods to fire them, but if you're not using that then you'll have to fire them manually.

  • How to reduce the number of data blocks used by table

    Hi,
    I was trying to reduce the space usage of a particular table of my apex application which stores blob content and therefore deleted many records from it.
    However, the data block usage remained the same as before.
    I have tried to 'analyze' the table and validate the structure,but am unable to overcome this problem.
    Could someone throw some light on what needs to be to reduce the number of data blocks used by this table?
    Best Regards,
    Priya Jetley

    Priya:
    It is likely that the BLOB content defined in your table is being stored 'Out-of-Line'. This means that the LOB columns are stored in segments of their own. These then are the segments that may need shrinking.
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14249/adlob_tables.htm#i1006363
    Varad

Maybe you are looking for