How to increase the row and Column length of Bex query in EP Portal 7.3

Dear All,
Please let me know the process to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Please let settings to increase rows up 10000 and column 100 in one page.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

Similar Messages

How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3

Dear All,
Please let me know the process how to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Currently I am getting Only 4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100 and row length more than 10000.
Please suggest me a suitable solution to over come this issue.
Please find the Below screen shot.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to get the Row and Column values in ALV (without using Objects)

Hi All,
I need to get the Row / Column when double click is used in ALV, I can use the double click event for this. However, I do not want to use the Object Oriented ALV. I want to implement the same functionality using general (using functions) ALV.
Is there any way to get the row / column values for a Generia (non-OOPs) ALV report.
Please help.
Thanks,
Vishal.

Hello,
The only think you have to do is to get the index where the user clicked, and then read the internal table you sent to the alv
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = 'prg_name'
      i_callback_pf_status_set = 'SET_PF_STATUS'
      i_callback_user_command = 'USER_COMMAND' " this is to the click event!!
      i_callback_top_of_page   = 'TOP_OF_PAGE'
      is_layout                = alv_layout
      it_fieldcat              = alv_fieldcat
      i_save                   = 'A'
      it_events                = alv_events[]
    TABLES
      t_outtab                 = i_totmez. ---> TOUR IT.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
" then....
FORM user_commandUSING r_ucomm     TYPE sy-ucomm
                                ls_selfield TYPE slis_selfield.
" r_ucomm -> HAS THE STATUS
" ls_selfield-tabindex -> HAS THE SELECTED INDEX
" THEN READ THE INTERNAL TABLE
" HERE YOU WILL HAVE THE SELECTED ROW
READ TABLE i_totmez INDEX ls_selfield-tabindex.
ENDFORM.
cheers,
Gabriel P.

How can i open a PDF bank statement in numbers so that the rows and columns contain properly aligned data from statement?

how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?

Numbers can store pdfs pages or clippings but does not directly open pdf files. To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
Then hold the option key while selecting a column of data.
Then copy
Then switch to numbers and paste the column into a table
Then repeat for the other columns in the pdf document
It would be easier (in my opinion) to download the QFX or CSV version from your bank

How to preserve a row and column in numbers automatically.ie the cells are not consecutivecell a1 a3 etc

working on a league table
when sorting the league table ,I need to preserve the row and column
I can preserve row and column by using the drop down menu on every cell,but would like to do it automatically(2 clicks to every cell)
working in numbers
yosemite 10.2

This technique would be quite slow. Unfortunately, it's the only way I could think of if it's really an Excel file. If it's tab delimited file, you could read a whole thing into 2D array and work on Array instead of reading cell-by-cell.

Summing the Rows and Columns in an Array

I am importing a 2-dimensional array of integers.(which is held in a 2-dimensional array)
I need to store the row sums and column sums in separate 1-dimensional arrays.
I can get the integers in and print out a list along with the grand total(sum of all).
But, how do I pass each row's and each column's value in to my sumRow and sumCol methods to get the sum for each row and each column?
Can I do the row and column summing in the same "for" statement where I calculate the "grand total"? Or am I making this more difficult than it is?
Would appreciate any help.
This is what I have so far:
import java.awt.Graphics;
import java.applet.Applet;
public class TwoWayTable extends Applet {
     int numRows;
     int numCols;
     int [] [] cell;
     int [] rowSum;
     int [] colSum;
     int grandTotal;
public TwoWayTable(int [][] data){
grandTotal = 0;
cell = new int [data.length][data.length];
for(int i = 0; i < data.length; i++)
for(int j = 0; j < data.length; j++){
     cell[i][j] = data[i][j];
grandTotal += cell[i][j];
     System.out.println(cell[i][j]);
System.out.println(grandTotal);
public int sumRow(int [] data2){
     int rowaccumulator=0;
     rowSum = new int[data2.length];
     for(int numRows = 0; numRows < rowSum.length; numRows++){
     rowaccumulator += rowaccumulator + rowSum[numRows];
          return(rowaccumulator);
public int sumCol(int [] data3){
     int colaccumulator = 0;
     colSum = new int[data3.length];
     for(int numCols = 0; numCols < colSum.length; numCols++){
          colaccumulator += colaccumulator + colSum[numCols];
          return(colaccumulator);

Thanks for your input.
I'll make the changes that you suggest.(after this)
My output prints:
4 6 3 8 21
9 1 5 3 18
13 7 8 11 39
numbers are right, but I need to format the table
the output needs to look like this:
int int int int | rowsum
int int int int | rowsum
colsum colsum colsum colsum | total
How do I do this?
I have no idea?
I'm supposed to call a "void setMargins( )" method to line this up, without
using the exotic formatting in the IO library.
I'm also supposed to use "public String toString( )"
This is what I have so far:
import java.awt.Graphics;
import java.applet.Applet;
public class TwoWayTable extends Applet {
int numRows;
     int numCols;
     int [] [] cell;
     int [] rowSum;
     int [] colSum;
     int grandTotal;
public TwoWayTable(int [][] data){
cell = new int [data.length][data.length];
for(int i = 0; i < data.length; i++){
for(int j = 0; j < data.length; j++){
     cell[i][j] = data[i][j];
calcTotals(cell);
for(int i = 0; i < cell.length; ++i){
for(int j = 0; j < cell.length; ++j){
System.out.print(cell[i][j] + " ");
System.out.println(rowSum[i] + " ");
for(int j = 0; j < cell.length-1; ++j){
System.out.print(colSum[j] + " ");
System.out.println(colSum[cell.length-1] + " " + (grandTotal));
     public void calcTotals(int [][] data2){
          grandTotal = 0;
          rowSum = new int[data2.length];
          colSum = new int[data2.length];
          for(int numRows = 0; numRows < data2.length; numRows++){
          for(int numCols = 0; numCols < data2.length; numCols++){
               grandTotal += data2[numRows][numCols];
               rowSum[numRows] += data2[numRows][numCols];
               colSum[numCols] += data2[numRows][numCols];

How to increase the row height of the table in the smartform

Hi,
Can any one say,
How to increase the row height of the table in the smartform.
It is presently show the row width very small, i want to increase the row with of the table in the smartform.
Plase say how can we increase the row height in the smartform.

Hi Ravi,
In Smartforms , Select the Table and you can adjust the cell hieghts in OUTPUT OPTIONs TAB.
Reward points if that Helps.
Manish

Is it possible to switch the rows and columns?

Is it possible to switch the rows and columns of a table? The reason I ask is that it would be easier for me to input the data with the number at the top of a column and the fields going down. But it would be easier to read the data with the number on the left and the fields going to the right. Is it possible to switch a table in this way?

mahongue wrote:
Is it possible to switch the rows and columns of a table? The reason I ask is
that it would be easier for me to input the data with the number at the top
of a column and the fields going down. But it would be easier to read the
data with the number on the left and the fields going to the right. Is it
possible to switch a table in this way?
It sounds to me as though you wish to transpose a table so that the original is changed from rows to columns and from columns to rows, as in the following:
Table 1
    A   B   C
========
1   o   p   q
2   r   s   t
3   u   v   w
Table 2
    A   B   C
========
1   o   r   u
2   p   s   v
3   q   t   w
You are right - it would be nice to have a menu item to magically transpose a selected block of cells. But there isn't one. So...
One way to solve this is to use the index() and transpose() functions to accomplish row and column cell transposition. If you are going to use a 1:1 cell correspondence and change the header columns and rows also, you can use this:
   =INDEX(TRANSPOSE(Table # :: <range>),ROW(),COLUMN())
where Table # and <range> is substituted as in the following fashion:
   =INDEX(TRANSPOSE(Table 1 :: $A$1:$C$3),ROW(),COLUMN())
Create a second table. Copy the modified formula above with the appropriate substitutions, select the range you wish to have your transposition inserted into (must match the transposed cell dimensions of the original range), paste the forumula and voila! the cells will be transposed.
Cautions:
o The target table must match the swapped cell length and width dimension. For example, if the original data range is 6 columns wide by 4 rows deep, then the corresponding table or range to hold the transposition must be 4 columns wide by 6 rows deep.
o If your transposed data block is to be offset from the origin of the new table, then you will need to include a subtractive offset into your cell formula, since in the transpose() function the data in the master data range is referenced from its position with the master range, not its cell position in the table. Such an offset is necessary because this example formula uses the target row and column numbers to arrive at indexed positions.
For example, if the new data range is to be offset one column to the right and one row below from the target table's origin then you must subtract (-1) from the cell and from the column references in the formula:
  Example:
  =INDEX(TRANSPOSE(Table 3 :: $B$2:$D$4),ROW()-1,COLUMN()-1)
If someone has a better solution I'd be glad to hear of it.

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

How to Increase the Selection screen window length width big....

How to Increase the Selection screen window length width big.... I cant able to do some enter text... because of the window size it gives error... can anyone help me out this...
Thanks in advance

hi,
Maximum size is fixed for selection-screen.
Split your text into different lines to fit it.
Create a text element for your text and write it as comments.
selection-screen begin of block b3 with frame title text-041.
selection-screen begin of line.
    parameters : p_all radiobutton group g2 default 'X'.
    selection-screen comment 10(75) text-049.
selection-screen end of line.
selection-screen begin of line.
    parameters : p_iloc radiobutton group g2.
    selection-screen comment 10(75) text-050.
selection-screen end of line.
selection-screen end of block b3.
Regards
Sailaja.

To increase the VARCHAR datatype column length

Hi,
I need to increase the VARCHAR datatype column length from VARCHAR2(16) TO VARCHAR2(100) on Production environment.
Kindly let us know the impact on Production and also required for downtime to proceed the activity.
Please find the details as below,
DB Version: Oracle 11g R2 (11.2.0.3)
OS : AIX 6.1
If you need further information, kindly let me know.
Thanks & Regards,
Raj

Hi,
You can do it online but better to perform at off-peak time because it will marked all those Cursor from Library Cache as Invalid which refer this Table which incurs hard parsing when those cursor refer by the application next time.
Thanks

JTable - Swapping the Rows and Columns

This issue was raised in the Java Programming forum. Received initially as a weird requirement, it now seems that it is more common than you might think. Under it's original title it was "JTable - Limitation or Not?"
I introduced the topic here so that the thread perspective can include more experienced Swing developers.
The JTable in it's default layout is intended to hold database tables with records in rows. But what if you want records in columns?
Some have said why? Just accept the row layout. Others have said use a customised form. Both reasonable views. Despite this, others report that the inherrited power of the JTable is worth leveraging and they have been doing it for years. Albeit with messy code in certain cases.
This is a clear candidate for a popular derived component. If the existing JTable were renamed as a JTableRecordPerRow I am describing a JTableRecordPerColumn. The corresponding Table Model must naturally have a getRowClass method and no getColumnClass method.
Java is good at seperating data from display issues so essentially this is only a display issue. The data representation is unaffected.
While this may be so, the TableModel for a JTable makes the link from the display to the data so it must have knowledge about cell type to trigger the correct cell editor for example.
I think it is fair to say that the standard JTable has not be designed with alternative row/column or column/row displays in mind. Hence a single getColumnClass method. However implementing a Table model which exchanges columns for rows is a good start. This leaves a few loose ends where editting is concerned.
While this may not be an ideal topic for anyone just learning Swing I have been encouraged to consider the general case within the limitations of the cell types normally supported by the default Table model.
I would have a guess that this is an established component in many private Java libraries already.
Views and experience on this topic extremely welcome.

It appears to me that while interchanging the rows and columns of a JTable is not trivial it is still worthwhile as a workhorse component.
Perhaps the original design could have allowed for an aternative layout manager of somekind but this could easily have made description of records/rows and fields/columns confusing.
I will probably get this summary wrong but I aill attempt to collate the neatest approach as I see it. Criticisms or shorter steps welcome. My thanks to the original contributors traceable from this thread.
In the descriptions below a distinction is made between the normal internal data model representation of a row, called "mrow", and the displayed form "row".
Only the TableModel need be changed.
1 Use row 0 to show the headers by a)disabling the normal TableHeader renderer b)setting the cell renderer for column 0 to the default renderer used by the TableHeader and c)using the getValueAt method to return mcol header values for the row entries.
2 For other row, col values to getValueAt return the value at mcol, mrow where mcol==row-1 & mrow==col.
3 Create a new getCellClass(col,row) method to return the class where mrow==0 and mcol==row-1. Note that I am only trying to immitate the common use of of a database record per mrow here.
4 Override a)getCellRenderer and b)getCellEditor to use getCellClass
Four steps with seven parts seems worth it to me.
The power of Swing!
Many thanks to all.

How can I make Numbers respect the row and column locks in an Excel workbook opened in Numbers???

I have a Windows server app that generates Excel workbooks to be emailed to political campaign volunteers to be loaded into Numbers on an iPad, edited, then emailed back to be posted to the server database. There are two problems encountered:
1. The Excel workbook has the first row (column headings) and first column (route identifier) of cells locked, so that they will not scroll off the screen, but Numbers doesn't respect the locks, so when the user scrolls horizontally or vertically, the column headings and/or the route identifier scroll off the screen.
2. The Excel workbook has pop-up "tool-tip" type comments in certain column headings in order to provide the user with the acceptable entries for those columns, but Numbers does not respect those. When the user touches any of the commented column heading cells, a context menu appears instead of the comment.
What must I do in the Excel workbook sheets, or what settings can be made in Numbers to correct the above?

I imported a Numbers '09 file into Numbers on the iPad. All comments were removed during import. Frozen header row and column were retained.
Thank you for your responses I must ask, however, when you refer to "importing" the Excel file, are you referring to a two step process whereby the Excel file is first converted by some other process into Numbers format, then opened in the Numbers application - which is what I have to do in my PC application to generate the Excel file, and reverse that process to convert the Excel back into my database format - or are you simply referring to opening the file in Numbers as "importing" it? And please excuse any ignorance, as I'm not at all familiar with Apple's terminologies. In fact, I don't own an iPad myself, but rather I have to depend on one of my clients to do the testing for me.
I imported an XLSX file into Numbers on the iPad. The file used "freeze panes" to "freeze" the first column and row. Only warning on import was that it changed fonts. It imported without the first row and column frozen and with no comments. Nothing I can do about the missing comments but it was a simple matter to turn the first column & row into headers and freeze them.
Unfortunately this would not be an efficient solution, since the end users are, for the most part, elderly political campaign volunteers who are fairly computer illiterate. These workbooks are actually canvassing lists - known as walklists. Their purpose is for the volunteers to interview voters, record the results of the interviews, and post the results to a database, which provides the campaigns with valuable strategizing capabilities. Also, these workbooks have multiple pages - as many as 10 or more. and from what I infer from the above, the setting changes would have to be made on each page.
My whole intent in developing this iPad/Tablet methodology was to significantly reduce volunteer's work - which is a recruitment benefit - and eliminate paper. While the latter would be accomplished, the former would not, and in fact would tend to increase it. It's necessary to keep the first row - column headings - and the first column - the route identifier - from scrolling off the page, so that the volunteer won't have to keep scrolling up and down and right and left to know what the data are.
Conclusion: Comments are not supported on the iPad version of Numbers. Frozen headers are not imported from Excel but can be recreated easily.
I was previously directed to the Apple website http://www.apple.com/ipad/from-the-app-store/apps-by-apple/numbers.html which extols the wonders of the Numbers application. About halfway down the page there's a section regarding, "Sliders steppers and pop-ups". The web page states that pop-ups can be set up but, being a marketing site, gives no indication whatsoever as to how it's done. I was hoping someone could tell my if there's any way to carry them over from an Excel file.

Displaying the Row and Column number in the report

I am trying to show row and column number in the report (not just web preview). I am using Hyperion Reports Version 7.2.5.168

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

Where'd the row and column headings go?!

I'm an experienced Excel user trying to learn Numbers....help!
So, I have a spreadsheet that I just exported to PDF after which all row and column headings disappeared! No idea why this would be or how to get them back short of closing and re-opening the file....please help.

Move the table away from the top of the sheet, leaving a larger white space at the top and see how that works for you when you export or print.
Jerry

How to increase the row and Column length of Bex query in EP Portal 7.3

Similar Messages

Maybe you are looking for