How to increase the size of the Data file?

There are two factors afftecting the datafile size. One is the block_size, the other is the MAX_Blocks. How can I increase these two number to increase the datafile size?
I am building the raster dataset. And I have several terabyte images. But currently, my max datafile size is just 32G.
Help me, pls.
Thanksk,

Thanks, first.
I sure definitely sure to increase the datafile size to more than 50GB. I am creating Raster Database. It's about 4 TB. If I can not have the bigger size datafile, I need to create so many small size datafiles.
Where is the setting for the MAX_BLOCKS? If I can not change this setting, can I change the BLOCK_SIZE?
There is a document: http://www.remote-dba.net/10g_45.htm. How can I get what he means MAXIMUM DATA FILE SIZE?
Thank you so much.

Similar Messages

How to increase font size on the finder and menu bar

how to increase font size on the finder and menu bar

according to this thread, in Leopard you can't but they offer some suggestions: https://discussions.apple.com/thread/2075719?start=0&tstart=0

How to increase font size in the report when emailed as PDF

How do I increase the font size of the report when I distribute the report as PDF to the users. I tried using different paper sizes in the LayOut tab in Broad Caster and Orientations. When I open the PDF from the mail I see the report shrinked and not readable, but when I magnify the report the numbers are visible with no loss in quality. I cannot give the users to print a shrinked PDF file. I would like to see a visiable font and print the same size what I see.

The size of the font is increased by selecting a bigger page size while emailing. This will automatically increase the size of the page.

How to control the size of live data in Coherence?

How to control the size of live data in Coherence?
See the following statement:
Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
--Excerpted from http://coherence.oracle.com/display/COH35UG/Best+Practices

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How to increase the size of Redo log files?

Hi All,
I have 10g R2 RAC on RHEL. As of now, i have 3 redo log files of 50MB size. i have used redo log size advisor by setting fast_start_mttr_target=1800 to check the optimal size of the redologs, it is showing 400MB. Now, i want to increase the size of redo log files. how to increase it?
If we are supposed to do it on production, how to do?
I found the following in one of the article....
"The size of the redo log files can influence performance, because the behavior of the database writer and archiver processes depend on the redo log sizes. Generally, larger redo log files provide better performance, however it must balanced out with the expected recovery time.Undersized log files increase checkpoint activity and increase CPU usage."
I did not understand the the point however it must balanced out with the expected recovery time in the above given paragraph.
Can anybody help me?
Thanks,
Praveen.

You dont have to shutdown the database before dropping redo log group but make sure you have atleast two other redo log groups. Also note that you cannot drop active redo log group.
Here is nice link,
http://www.idevelopment.info/data/Oracle/DBA_tips/Database_Administration/DBA_34.shtml
And make sure you test this in test database first. Production should be touched only after you are really comfortable with this procedure.

How do I increase the size of the text on the toolbar?

How do I increase the size of the toolbar text, please? For some reason, it's now very tiny, and everything I do only increases the font size of whichever web sites I access (which is not what I'm wanting to accomplish).
Thanks in advance for any help in this. Actually, I'm wondering what I might have done that would make the toolbar so tiny?

Do you mean the menu bar at the very top of your screen?
If so, open System Preferences > Displays > Display > Scaled
Try a different resolution.

How to fix the size of table data in html

I want to fix the size of table data in html. ie if i want to insert only 50 char in a <td> field then it contain only 50 character, after that it switched to another line and contain the remaining character. Means <td> field wil not get automatically adjust there size according to data.

you cant specify how many characters a td cell can have but u can specify the pixel width of a td cell
<td width=50>
as long as you have wrap text on, then text will not force the box size over the 50 pixels
this wont limit it to only 50 chars though, you will probably have to use some javascript to cut the string down to size (unless youre using something like php or asp then that will do the trick too)

How do you increase the size of the tabs in excel?

Hello,
I am working with Excel on the new 27" iMac, can anyone inform how you are able to increase the size of the tabs on each worksheets?
The software is OfficeMacs 2011.
Thanks,
A

http://answers.microsoft.com/en-us/mac?auth=1

How to increase the size of the applet/ form displayed on the bowser

kindly guide me how to increase the size of the applet / forms displayed on the browseri.e the width and length of the forms/applet so that i can display all the controls on the form .
thanks with regards

i changed the value of width and height in formsweb.cfg file in my devsuite_home/forms/server/formsweb.cfg , i am able to see the result when i compile and run the form in devsuite, whereas the same is not reflected when i run the same form in application server.
when i tried to change the value of abbovementioned file in oracle_home /forms/server/formsweb.cfg of the application server file , the file does not have the applet wdth and applet height values. in fact this file does not have any applet information..
pls guide
thanks with regards.

How to increase the size of the fonts for file, bookmarks and all toolbars in firefox 4.01

how can i increase the size of the fonts such as file, bookmarks,tools,etc and all toolbars

Try this extension:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

How to increase the size of the exported dashboard in powerpoint

When I am trying to increase the size of the dashboard in the powerpoint then the fields are overlapping in the powerpoint slide.
Actually in the preview the size of the fields is clear and font is visible. But in the ppt if the report size is not increased then the font is not clear, and when increasing the report in the ppt then the fields are overlapping.
How to resolve?
Thanks in advance

Siva,
This is very common issue.
Try increasing the font size and align your components in design mode, and try resizing the dashboard in ppt as well.
Hope this helps...
-Anil

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.
Once it started, it just shows it's progress and there's no option I can find to stop the download.
Any help greatly appreciated.
Regards,
Kye.

Hi,
I am not sure whether it works, Try "Restore Sound Library" in Menu.

Apple Mail (Mavericks), Viewing size of list is too small.how do you increase the size of the email message list. The font is too small, I can hardly read them.

In Apple Mail, using Mavericks, how do you increase the size of the email message list that displays on the left side of the screen?
The font size is so small.
Thanks.

Thank you for responding. After investigating and checking further, it was clear that only one of your suggestions changes the font size of the list of emails, also called the In-box. And that is the display resolution.
However, changing the display resolution affects the dots per inch of everything, everywhere and makes it larger.
Given the high end fee Apple charges for their products, and the generally well developed software they provide, it is hard to imagine they have not corrected this obvious slight of effort on the inbox text. At times Apple's "one-size-fits-all" and "it's our way or no way" mentality astounds me and makes me want to run back to Microsoft.
Evidently this is a well known mistake, which has yet to receive any attention.
Again, thank you for your effort and assistance on my behalf.

HT201401 How do i reduce the size of my Other file to increase storage capacity?

How do i reduce the size of my Other file to increase storage capacity? I have almost 4.5g taken up of storage in Other on my 8g phone.

Use search or check out the "More Like This" section to the right to find answers to the question.

How to restrict the size of Buffer data object

Hi everyone.
How do you restrict the size of the Buffer data object. The byte array that you get by calling getData(). I want to restrict the size to be at most X nbr of bytes. I'm 'filling' the buffer like this:
Buffer readBuffer;
PushBufferStream stream;
stream.read(readBuffer);

This is my code:
class DataSourceHandler implements DataSink, BufferTransferHandler {
          private int MAX_DATA_PACKET_SIZE = 2000;
          private DataSource source;
          private PullBufferStream pullStrms[] = null;
          private PushBufferStream pushStrms[] = null;
          // Data sink listeners.
          private Vector listeners = new Vector(1);
          // Stored all the streams that are not yet finished (i.e. EOM
          // has not been received.
          private SourceStream unfinishedStrms[] = null;
          // Loop threads to pull data from a PullBufferDataSource.
          // There is one thread per each PullSourceStream.
          private Loop loops[] = null;
          private Buffer readBuffer;
           * Sets the media source this <code>MediaHandler</code> should use to
           * obtain content.
          public void setSource(DataSource source)
                    throws IncompatibleSourceException {
               // Different types of DataSources need to handled differently.
               if (source instanceof PushBufferDataSource) {
                    System.out.println("source instanceof PushBufferDataSource");
                    pushStrms = ((PushBufferDataSource) source).getStreams();
                    unfinishedStrms = new SourceStream[pushStrms.length];
                    // Set the transfer handler to receive pushed data from
                    // the push DataSource.
                    for (int i = 0; i < pushStrms.length; i++) {
                         pushStrms.setTransferHandler(this);
                         unfinishedStrms[i] = pushStrms[i];
               } else if (source instanceof PullBufferDataSource) {
                    System.out.println("source instanceof PullBufferDataSource");
                    pullStrms = ((PullBufferDataSource) source).getStreams();
                    unfinishedStrms = new SourceStream[pullStrms.length];
                    // For pull data sources, we'll start a thread per
                    // stream to pull data from the source.
                    loops = new Loop[pullStrms.length];
                    for (int i = 0; i < pullStrms.length; i++) {
                         loops[i] = new Loop(this, pullStrms[i]);
                         unfinishedStrms[i] = pullStrms[i];
               } else {
                    // This handler only handles push or pull buffer datasource.
                    throw new IncompatibleSourceException();
               this.source = source;
               readBuffer = new Buffer();
               byte[] data = new byte[MAX_DATA_PACKET_SIZE];
               readBuffer.setData(data);
          * For completeness, DataSink's require this method. But we don't need
          * it.
          public void setOutputLocator(MediaLocator ml) {
          public MediaLocator getOutputLocator() {
               return null;
          public String getContentType() {
               return source.getContentType();
          * Our DataSink does not need to be opened.
          public void open() {
          public void start() {
               try {
                    source.start();
               } catch (IOException e) {
                    System.err.println(e);
               // Start the processing loop if we are dealing with a
               // PullBufferDataSource.
               if (loops != null) {
                    for (int i = 0; i < loops.length; i++)
                         loops[i].restart();
          public void stop() {
               try {
                    source.stop();
               } catch (IOException e) {
                    System.err.println(e);
               // Start the processing loop if we are dealing with a
               // PullBufferDataSource.
               if (loops != null) {
                    for (int i = 0; i < loops.length; i++)
                         loops[i].pause();
          public void close() {
               stop();
               if (loops != null) {
                    for (int i = 0; i < loops.length; i++)
                         loops[i].kill();
          public void addDataSinkListener(DataSinkListener dsl) {
               if (dsl != null)
                    if (!listeners.contains(dsl))
                         listeners.addElement(dsl);
          public void removeDataSinkListener(DataSinkListener dsl) {
               if (dsl != null)
                    listeners.removeElement(dsl);
          protected void sendEvent(DataSinkEvent event) {
               if (!listeners.isEmpty()) {
                    synchronized (listeners) {
                         Enumeration list = listeners.elements();
                         while (list.hasMoreElements()) {
                              DataSinkListener listener = (DataSinkListener) list
                                        .nextElement();
                              listener.dataSinkUpdate(event);

How to Increase the size of the table?

Hi All:
I'm a newbie and i'm trying to understand how can I increase or set the size of the table. I want to display all the columns and rows of the table but for doing that I understand that the size of the tbale has to be increased . The following is the warning I would get when looking at the database. How can I get over it. Any suggestions?
The table GOESDBA.SAT_PARAM_VALUES contains more than 2000 rows. Displaying all the columns and rows of the table could be time-consuming.
best,
Sri

I'm migrating the database from Oracle to MySQL through a migration kit.I don't know anything about MySQL or your migration kit (this is an Oracle forum after all).
Is there some way that the size of the table can be increased on the oracle sideBut this doesn't make sense anyway. What you're saying is that the table is too large. So why would you want to make it larger?

How to increase the size of the Data file?

Similar Messages

Maybe you are looking for