How to increase the time of silde record.

Hi,guys!
sorry for my poor english.
I meet a problem.when i finished a full motion recording and
publish it.i found there so many swf files named *_Fullmotion*
under that folder.and all of them are necessary otherwise i can not
show my complete flash.how can i reduce the number of these swf
files?
Thank you.

Welcome to our community, Smileruner
This sounds like you have used Captivate and enabled the
"Full motion" recording option. Try using it differently. Use
Demonstration recording and you will still end up with many
different slides, but fewer actual files to distribute when you are
finished.
There are also issues you are probably unaware of with using
the Full Motion recording. If you create a recording that is long
enough, you end up seeing the "Red Screen Of Death" as playback
exhausts all available memory. Also keep in mind that it's quite
literally WYSIWYG. You cannot change aspects of Full Motion
recording after you are finished as you can with the other modes.
Cheers... Rick

Similar Messages

  • How to increase the time for detect a device down on Prime 2.0

    Hi,
    I would like to know how to increase the time for detect when a device has lost connection, currently I monitor several stand alone Access Points that are paleced on differents locations connected to prime through 256 Mbps Links, so when the location has very high bandwith utilization, an e-mail notification about the unreachable Access Point is sent, but if we check te reachability, the Access Point is reachable, and we don´t want to receive to many of this notificatios,
    thanks for your help

    Go to the Console,   Select the server --> configuration --> tuning tab, 
                        Stuck Thread Max Time and Stuck Thread Timer Interval  (give your required time)
    This will definitely increase the Stuck Thread time interval.
    or
    by using work manager also you can define Stuck Thread Max Time interval by editing deployment descriptor file
    <work-manager>
    <name>wm_name</name>
      <max-stuck-thread-time>30</max-stuck-thread-time>
    <stuck-thread-count>5</stuck-thread-count>
    </work-manager>

  • How to increase the time at the end of what aaa requeries the authentication of a client web

    Hi All,
    I configure ASA aaa to authentificate our internal web client to access to internet. It's check the username/password of client in our Active Directory.
    When the client initiate the first connexion, the ASA request the login connexion and when it's correct, it authorise the access. But after 10 min for exemple, it's request again the login, and so one and so one. Approximativelly, after each ten minute, it requeste an username/password.
    I want to know how can i increase the time between two authentifcation. Or increase the time of 10 min.
    Thanks.

    The authentication timeout is configurable via the "timeout uauth" command, and you can set either absolute or inactivity timeout.
    Here is the command for your reference:
    http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/t.html#wp1569874

  • How to increase the time for threadstuck jdeveloper weblogic server

    Hi,
    This is a requirement for increasing the time for threastuck detection in jdeveloper weblogic server.
    Few of my threads take a longer time than the default value for threastuck detection.
    Could you please share the suggestions on how to do it?
    i have tried by creating workmanager from the administration console but not aware of how to apply it to application(in web.xml).
    Share inputs on this.
    Thanks,
    Devender

    You are posting this on the wrong forum. All this in one of the server forums.
    Timo

  • How to increase the time of an introduction clip

    Hi. I'm working on my first ever video. I have nearly completed everything, including the editing and
    adding in a secondary sound track. I now need to add in voice over clips for each segment.
    When recording the voice over for the lead-in segment (a fade from black segment with an illustrator heading/title), I realized that the voice-over required is significantly longer than the fade from black clip that I originally put into the video; the voice-over needed is 21.9 seconds long and the fade from black segment is only 5 seconds long.
    I've tried simply moving the right edge of the lead-in segment to the right to extend the time, but nothing happens. I can't seem to get the entire video to extend its timeline. I must have obviously locked some or all of the segments, but I can't seem to figure out how to unlock them so I can extend the lead-in segment.
    Can anyone tell me what I'm doing wrong, or what I need to do to fix this. Surely there is a simple way to extend the timeline of the lead-in segment, and I'm just missing it.
    Thanks in advance to anyone that can offer suggestions.

    Hi,
    try moving everything to the "right" of the clip you want to extend...make longer ...to the right..out of the way....
    If you have "handles" on that clip you can drag it out to the time you want...if you dont have handles you can drop a "new" instance of that clip in its place and make it as long as you want..

  • How to increase the time period in Debugger

    Hi,
    If we put Debugging screen Idle for some time,we will get timed out Status bar message.Can we increase that time period.

    hi,
    A work process which is processing your task is set into a DEBUG mode.
    Debugging in general does requesting a huge memory consumption and system resources as well.
    This means that system is moving data to its extended memory in PRIV mode.
    In this mode normal request being processed by other work processes are located in local memory instead of extended. Extended memory is occupied by data for debugging user exclusively. However this cannot persist in system for a long time. So since you are not active in debugging session for some time system is canceling whole debugging with following messages:
    1) Transaction from "PRIV" session reset after timeout (Message no. 14048)
    2) Transaction from "DEBUG" mode (after timeout) reset (Message no. 14056)
    From basis point of view for production system there should not be a necessity to adjust profile parameters in order to allow debugging for a long time and for a so much users. If you wish to avoid this message anyway or you want to make debugging more comfortable on development or test system you need to consider following profile parameters:
    1)rdisp/max_priv_time # Standard value: 600
    2)rdisp/wppriv_max_no # Standard value: MAX(1, Anzahl Dialog-WPs)
    3)rdisp/max_debug_lazy_time # Standard value: 600
    thanks and regards
    chinnaiya

  • How to increase the waiting time for response in Adapter Engine not in IE

    Hi Experts,
                It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired.  We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
    kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with  status flag Log version.
    Thanks & Regards,
    Srihari.

    Hi,
    Please see
    How To... Investigate Timeouts In Synchronous XI/PI Scenarios
    It will answer all your queries
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

  • How to increase the logout time

    Hi Guys,
    My PIA logs out for every 20 minutes. i do not want that happen. I want to increase the time for logout to 1 hour.
    Can any suggest me how to do that?
    Please help me.

    Then you should be able to find under Peopletools menu, the webprofile configuration, choose the one you are using to start the webserver (if you don't know which one is using, check the configuration.properties file, it should be somewhere in that file), and modify the timeout on the next page.
    Nicolas.

  • How to increase the web session time out for FDM While data uploading.

    I have very large data files of Balance Sheet and Profit & Loss. These are taking very long time while being loaded through FDM. Kindly let me know of the following:
    1 - How can I increase the time for "web session time out" in FDM; and
    2 - What is the standard data loading time, e.g. how much time should it ideally take for approximately 1,000 lines to be load in Hyperion.
    Regards
    Amjad
    Edited by: ar_aff on Sep 12, 2011 8:30 AM

    You supposedly feed it a (undocumented) parameter, -rxidletimeout, with the time in seconds, at startup.
    app.serverSettings.sessionTimeout will report back whatever value you fed it. However, in my experience so far, the timeout is somewhere around 30 seconds no matter what value you feed it. I might be doing something wrong.
    I currently have a ticket open with Adobe support about this very issue, but it's slow going. I'll try to update you with whatever I find out.
    I'd love to hear whether anyone else has this working.
    Jeff

  • How can we increase the maximum number of records which we export from UME

    Hi All,
             Is there any way to increase the maximum number of records which we can export from the UME.
    Please give your valuable suggestions as soon as possible.
    Thanks in Advance
    Regards,
    Ramalakshmi.S

    I didn’t find any configuration you can set to increase the number. I think it is related UI. The number is designed programmatically.
    Lisa Zheng
    TechNet Community Support

  • How to increase the number of rows to be displayed in BEx Web Analyzer

    hi,
    I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows  of data at a time. How to increase the number of rows? do i need to any kind of settings?
    pls reply.

    Hi,
    I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
    <bi:BLOCK_COLUMNS_SIZE value="4" />
    <bi:BLOCK_ROWS_SIZE value="17" />
    Then just save, and ignore the error messages.
    Message was edited by:
            vind Reinsberg

  • How to display the time length of video (current time/ total time) ?

    Hi,everyone. I would like to ask how to display the time length of the video which show only in system example: it show the current time and total time? using AS 3.0.
    It there any information or solution to solve it? .
    I appreciate it any of you able to answer it. ^^
    Thank you.

    Hi,
    Actually I have this requirement for MAC OS 10.5. With the code you provided, I got the output as "6289375". When I changed the URL to point to my file (file:///Users/VPKVL/Desktop/MyRecord/tempAudio.wav), I am getting the below mentioned Exception:
    Exception in thread "main" javax.sound.sampled.LineUnavailableException: Failed to allocate clip data: Requested buffer too large.
         at com.sun.media.sound.MixerClip.implOpen(MixerClip.java:561)
         at com.sun.media.sound.MixerClip.open(MixerClip.java:165)
         at com.sun.media.sound.MixerClip.open(MixerClip.java:256)
         at TestWavLength.main(TestWavLength.java:13)The "tempAudio.wav" file is created by using java sound API. I am using the SSB USB Headphone Set to record the audio with the following settings for AudioFormat object:
    AudioFormat audioFormat = new AudioFormat(
              AudioFormat.Encoding.PCM_SIGNED, // the audio encoding
                                                            // technique
              48000.0F,// sampleRate the number of samples per second
              16, // sampleSizeInBits the number of bits in each sample
              2, // channels the number of channels (1 for mono, 2 for
                            // stereo, and so on)
              4, // frameSize the number of bytes in each frame
              48000.0F,// frameRate the number of frames per second
              false); // bigEndian indicates whether the data for a single
                            // sample is stored in big-endian byte order
                            // (false means little-endian)Can you please suggest where I am going wrong ?

  • How to reduce the time of a loop

    Hello,
    I have a VI how generate and acquire signals via a NI-USB device.
    I have lighted a bit my VI because the rest of the calculation doesn't increase the time spend in the loop.  (I acquire 8 signals and i do 2 PID in the real VI)
    So, the VI is made for read two hall sensor of a motor and tell me in wich position is the motor (Motor is a stepper with 20step per 360°). But I think that my VI only count from 0 to 19 ..
    I have tried to decrease the values of both DAQ but then the sine wave doesn't look like sine.. The loop run at 200ms/iteration
    If anyone know how to run it faster it would be great
    thanks
    Max
    Attachments:
    Loop_time.vi ‏181 KB

    And use a zip file.  Many people can't open RARs.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How to increase the battery life of your N series ...

    What I am about to post here is valid for any 3G phone or device regardless of model but it is particularly focused towards the N series devices and their power hogging features.
    Your battery life is dependant on many many things. How often you take calls on the device, the condition of your battery, the features you use on the device and so on and on. Therefore it is impossible to say that by following the information in this post you will get x amount of days battery life, but it will get you more time out of the battery than you otherwise would have got.
    So with that out the way, if your looking to increase your battery life then follow these tips and your battery should start looking a lot healthier.
    First of all lets start with THE big one. The one that is going to save you the most juice. Switching 3G off.
    Yep, you heard me right. Just by switching the 3G capability of your phone off you will add hours and hours to your battery life. How is this so? Allow me to explain...
    Due to the rather poor delivery of 3G in the UK by the network operators, it is rare for any 3G phone to maintain a constant 3G signal. Instead you will find that the phone constantly flips between 3G and GSM mode (Keep an eye on your signal one day). Even those of you on Vodafone who probably have the best 3G network coverage will find this is the case.
    Unfortunately, this constant flipping between the two modes sucks power from the battery like a vampire as it alters its reception state for the different modes and the constant flipping is..well...causing it do this constantly! It can sometimes even make your phone unavailable for calls for very brief periods as it trips from GSM to 3G and vice versa.
    If you need to use 3G for video calls or whatever then I'm afraid your just going to have to live with this but if you don't (And lets face it few of us do) then you can switch 3G off and increase your battery life considerably.
    To do this, go into the "Settings" application (Found in the menu somewhere, by default Nokia normally stick it in "Tools"), and then to the "Phone" tab. In there you will see an option that says "Network mode" and you have a choice of "GSM" or "Dual Mode" (I.e. UMTS and GSM). Set it to GSM and your phone will restart. Once it restarts it will be working in GSM with GPRS speeds only but really for most purposes this is fine.
    You have now just extended your battery capability considerably. You can further extend it by going to the "Connection" tab, going into "Packet data" and changing it to "When needed" so it is not constantly checking for a data connection.
    The second big change you can make is to turn your phones wifi scanning capability off. The last time I looked not all Nokia's phones that have wifi capability can have their wifi cards switched off entirely but if you can, turn it off except for when you need to use it. Wifi is a power hog.
    The next big change you can make is to lower the screen brightness settings on your phone. The less bright your screen is the less power is being used to light it up. Nokia by default leave the screen brightness at something like 50%. Lowering this a bit more will conserve more juice. Before you do this though please consider the fact that lowering the brightness setting will have a big impact on your ability to see the screen clearly in sunny conditions although you will be fine in the dark as you can't lower the brightness that far.
    To lower the brightness, go to the settings tool in your phone and into the display option (Hidden in a subcategory called "Personalisation" on the N95). It won't hurt to set the power saving time out to 1 minute and the backlight time out to 10 seconds while your here (Although these are the Nokia default so they should already be set to this).
    Finally in regards to the screen, although they may look pretty, animated screensavers use more battery power than the standard blank screen with time and date so avoid them if you can.
    It also helps to keep Bluetooth switched off until you need it although the power savings are minimal in comparison to the other changes but every little milliamp counts!
    Using the above methods I generally get about 3 to 4 days with about 3 hours talktime on my N95 without using Bluetooth, GPS or anything like that (I might be able to get more but so far I have not paid attention to the battery state before I put it on charge). If I am on a long train journey I can get about 4 hours worth of full screen video and about 2 hours talktime over the period of about 24 hours before it needs a recharge. As I said at the start of the post your mileage will vary greatly depending on how you use your device.
    Hope this helps.
    Useful links: Phone firmware update | Nokia support site

    02-May-200701:14 PM
    bixby wrote:
    no keffa it is a cop out from nokia
    its not unfai as its a premium device with a premium price
    the n95 battery is atrocious
    dont change the post content as the title is 'How to increase the battery life of your N series device'
    your talking about nokia phones specifically
    the networks are not to blame
    they do not make the handsets : Nokia do !!!!!!!!!!
    I'm going to choose my words carefully here...
    I would never deny the battery on the N95 is not really up to the job of powering the N95 with its power hungry features. To put the same battery into a phone that has WiFi, GPS and a large 320x240 screen, the same one that goes into the E65 which has comparatively nothing compared to it is a bit pants.
    However at no point was I criticising them for the band hopping problem. I labelled the post as how to increase the battery life of your N series device because this is a board for the N series devices. It was a simple choice of wording and not intended to be cutting in any way and I did make a remark that the details would be true of any 3G device at the top of the post.
    What I was trying to point out in my second post is that the constant band hopping the phone is being forced to do that is draining its battery so much more quicker than it would if it had a constant signal of one kind or another isn't quite Nokia's fault.
    They build it to conform to a laid out specification for 3G. However if the network operators cannot be bothered to roll out their 3G infrastructure adequately enough that the phone can find and remain locked onto a 3G signal that is usable then what are Nokia to do other than offer you the capability to turn 3G off until you need it (Although note to Nokia: That **bleep** reboot the phone does when you do this is entirely unneeded and you know it).
    Blaming Nokia for this would be like blaming the manufacturer of your radio for failing to pick up radio because the radio station does not have any transmitters within range of your radio's receiver.
    Finally...this band hopping is exhibited by all 3G phones built by Samsung, Nokia, Sony Ericsson, etc, from their most budget 3G model to their priciest piece and is the reason that all phones with 3G capabilities have batteries that do not last for any respectable length of time because these phones are also having to band hop between 3G and GSM.
    Finally the proof is in the pudding. Turn 3G off for a few days. See your battery improve. Then (Although admittedly this will be harder to do...mcuh harder) find an area where you get a fairly decent 3G signal constantly. Again, see your battery improve. Try it with a different 3G phone...different manufacturer even. The same will be true.
    So I stand by my comment, the network operators and their woeful 3G rollout are the villains costing you a fair chunk of your battery and Nokia cannot be expected to mitigate this....but a better battery would be nice all the same...
    Useful links: Phone firmware update | Nokia support site

  • How to increase the speed of video (avi file) using labview

    How to increase the speed of video (.avi file) using labview? I have  tried this by skiping alternate frames. also I have used  minimum time delay.Is there  any other option for which i can go?
    please suggest me........... 

    Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
    Matthew Fitzsimons
    Certified LabVIEW Architect
    LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Maybe you are looking for