How to increse the info object length from 60 to 240

Hi Experts
I have one requirement
charectoristic maximum lenth is 60 ,how can i increase these lenth from 60 to 240
can any one help me
Regards,
Ogeti

Hi
Here is demo for creating 4 objects.
/people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling
But i tried this but the incoming data is not so flexible to understand.
Hope this helps....
Rgds,
Dev

Similar Messages

How to activate the Info object catalog in Business content

Hi,
While trying to activate the Info object catalog, I found that some of the info objects under this catalog was earlier activated by some other developer. I brought this catalog (0SALES_CHA01) over to the Business content activation panel ( with only 'necessary object settings ) and all the info objects that also came along were de-selected since I didn't want to install those again). When I tried to install these I get an error indicating that some of the info object in question are not already active.. and ultimately the catalog doesnt get activated , although more than half of its infoobjects are already active under the '0CHANOTASSIGNED' node.
Please let me know whether I can get only the Catalog activated without getting any existing activated info object merged or installing those which are not already activated.
Thanks
Arunava

Hello Arunava,
Just drag the infoobject catalog as u did earlier to the left in the bus cont installation screen with "only necessary object" option.
Dont try to deselect any object. Go ahead with the default options and install in background.
Now you can check for the available objects in the catalog. if you have some objects missing, and available in unassigned node,double click on the newly installed infoobject catalog, select the required objects (which are not yet assigned to this) from the left side and bring them to the right side.
this will make the unassigned objects assigned to the required catalog.
Hope it helps..
(please dont forget to reward points to helpful answers)

How to deactivate the load objects runnnig from CRM to CDM in TCode:R3AM1?

Hello Friends,
We are using CRM 4.0 , at the time of implementation they had done settings for Mobile sales also.But since implementation we are not using Mobile sales, using only CRM sales.
My concern is , in TCode : R3AM1 (Monitor Objects) , many of the objects are in status "Done" with source site " CRM " and Destination as "CDM". And these load objects are running on regular basis .I want to exclude or delete these load objects to run with destination as "CDM" and want only Source site as "OLTP" and destination as "CRM" and vice versa.
Also how can i find which background job is using what load objects?
Would appreciate for your valuable suggessions to achieve this.
Cheers
Sreedhar

Hello Soumya,
Thanks for the info.
My question is how to delete or remove or deactivate the destination as CDB(Mobile sales) in the R3AM1 T Code.Most of the standard Load objects are running in the background (as Background Job) and source site as "CRM" and Destination as "CDB" . Since we are not using Mobile sales , unnecessarily these load objects are running regularly and showing green "Done" status . How to find which job is running all these objects so that i can stop rnning this job?
Let me know for any additional info.
Cheers
Sreedhar
We are using CRM 4.0 , at the time of implementation they had done settings for Mobile sales also.But since implementation we are not using Mobile sales, using only CRM sales.
My concern is , in TCode : R3AM1 (Monitor Objects) , many of the objects are in status "Done" with source site " CRM " and Destination as "CD". And these load objects are running on regular basis .I want to exclude or delete these load objects to run with destination as "CDM" and want only Source site as "OLTP" and destination as "CRM" and vice versa.
Also how can i find which background job is using what load objects?
Would appreciate for your valuable suggessions to achieve this.

How to increase the check number length from 13 to 15( PAYR-CHECT)

Dear Experts,
I have the requirement to increase the check number (chekt) length from 13 to 15. Bcz few vendors UTR number generating with 15 degits in the the bank which are updating as check number in our system. But payr-chect (check number field ) length is 13 , so it is not getting updated. so customer wants to increase the length from 13 to 15.
Thanks & Regards,
Radhakrishna.Ette

Hi
Please, see note 1871827 - Limitation of length of field CHECT upto 13 characters for manual bank statement FF67
I hope this helps you
Regards
Eduardo

How to increase the mail attachement length from 255 chanracters ?

Dear All ,
I am sending a mail to my vendor as attachement .
I have developed one report which caontain 90 coulums now i am taking my final
internal table and sending it as a Mail but not able to send whole as an attachement Bcoz tht 90 columns
length is more than 255 characters which my OBJBIN not allowed to send so its automatically get truncated ..
How to solve this problem . Please help or sample code for this issue .
rgds aryan .

Hello Aryan,
Please have a look @ this [blog |http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID1680813550DB11172067746081864597End?blog=/pub/wlg/789] by Thomas.
In one of the comments he has explained hoe to send data longer than 255 characters.
Good Luck !!
Suhas

How to increase the length of the Info object

Hi All
Any one have idea about how to increse the length of the Info object Char(beyond 60). Can you please explain me in detail we are using BI7.0.
Thanks
Vani

Hello Vani,
You cannot increase the length of an info-object beyond 60 chars.However if you want to store a characteristics data with more than length 60, then you may create separate info-objects
for example: if you need to store 'notes' which might have length more than 60,
then you may create info-objects like notes 1/3 ---store first 60 chars.
notes 2/3 --- store next 60 characters and so on.
Thanx
Priyanka

How to reduce the length of the info object that's being used?

Hi All,
I have created info objects and used them in a DSO. Now I want to reduce the length of the info objects but i'm unable to do it. When I reduced the length and tried activating the Info object, it's giving me error and the info object is not getting activated. Please guide me how I can reduce the length and activate the Info Object.
Thanks
Hima Bindu

Reducing the length of an infoobject is not that easy
Cleanest way -
Drop all transaction data for that infoobject
Drop all data in the DSO and cubes.
Reduce the length and then activate and transport all the infoobject and there dependence objects.

How to remove the space in the info object level?

Hi,
I created a Master Data info Object and gave the data type as <b>Char</b> and length as <b>30</b>.
From the source system I am getting the data of length 9. But at PSA level I am getting some erroneous records.
Example: Data from the source system 'a12345678'
Data in PSA 'a12345678b' -
*** where b - Blank
With out changing the length how can I remove the spaces (Blank)?
Can any one suggest me how to remove, where and what to apply ?
I need to do any settings at the info object level or at the Transfer Rule?
Please provide the each and every step to resolve my problem.
Thank you

Hey you can allow space in RSKC tcode and execute it... .that's it .
and below is the routine for invalid chars and you can have this in update rules ..
data: w_fielda(x) type c.
data: w_result(x) type c.
data: w_temp_field(1) type c.
data: w_count type i.
w_fielda = COMM_STRUCTURE-/BIC/Zxxxxxx.
w_count = 0.
do x times.
clear w_temp_field.
w_temp_field = w_fielda+w_count(1).
if w_temp_field CA
'!"%&''()*+,-./:;<=>? _0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'.
w_result+w_count(1) = w_temp_field.
endif.
w_count = w_count + 1.
enddo.

How to track the user who deleted the info object.

Dear Gurus,
In our BI system one info object has got deleted. If I need to track the user who has deleted that how can I track it(in which DBtable). And the complication is one user ID is being used by many people, in this case how can I track that from which machine the Info Object has been deleted(if there is any possibility to track the machines by IP address).
Kindly let me know if there is any procedure to find it out. Your help will be rewarded with a great honour.
Regards
Mohan Kumar

Hi dear,
you have to go in SLG1 transaction, and then select
Object: RSD
Subobject: IOBJ_DEL
External ID: (put here the name of your deleted IO)
Then choose a time range...and voilà, you can find the user who deleted the IO...
Hope it helps!
Bye,
Roberto
About the IP...look at USR41 table, but I think it's a bit difficult fo find data referred to the past...
If you haven't activated logon auditing in SM19...

How to dispay the text values of the info objects in my transformations

Hi
Can any one say how to do a lookup for a text table. For example for a particular customer number i need to get the customer name from the text table.In the same way i need to display the text values of the info objects in my transformations. It would be great if any one could send me the code.
Thanks
R

Thanks for the immediate reply Anshul, Actually i am having the fields of short description and long description in my text table, my requirement is to display only the long description data in the text table. So it would be great if you could get me the solution.
Thanks
R

How can we find out the info object in a query ....?

How can we find out the info object in a query is belongs to that particular info cube? If the query is built on a Multiprovider having 4 different info cubes.

Hi,
If you have restrictions at the infoprovider level in the RKF then it is coming from that particular infocube.
Or go to the selection option in the multiprovider...her you can get the mappings of which key figure is populted from which infocube.
For characteristics you will have to look for identification tab in the characteristics option.
Thanks

How to get the byte[] size dynamically from the StreamMessage object

Hi all,
Using JMS, I am receiving the FDF file as StreamMessage from the queue and attaching it to the PDF file which is present in the local system.
For that, I have written the code as follows:
{color:#0000ff} Message msg = jmsTemplate.receive();
if(msg !=null && msg instanceof StreamMessage)
StreamMessage message = (StreamMessage) msg;{color}
{color:#ff6600}//hardcoded the byte array size value
{color}{color:#0000ff} byte[] bytes = new byte[{color:#ff0000}856{color}];
System.out.println("read msg="+message.readBytes(bytes));{color}
{color:#0000ff}PdfReader pdfreader = new PdfReader("D:\\Managing_Workflows_No_Comment.pdf");
PdfStamper stamp = new PdfStamper(pdfreader, new FileOutputStream("D:\\12345.pdf"));
FdfReader fdfreader = new FdfReader(bytes);
stamp.addComments(fdfreader);
{color} {color:#0000ff} stamp.close();
{color}{color:#000000}The above code is working fine except with the hardcoded of {color:#ff0000}byte array{color}{color:#ff0000} size value{color} which is given in {color:#ff0000}RED{color} in color.
Can anybody know, {color:#000000}*how to get the byte[] size dynamically from the StreamMessage*{color} object ?
Any help would be highly beneficial for me !!!!
Thanks and Regards,
Ganesh Kumar{color}

When you create your stream message you could add an property to your message, something like streamSize that would contain the number of bytes in your stream message. Then you could get this property from the message before declaring your array.
Tom

Error when assigning SID while uploading text in the info-object of the DSO

Hi
I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
I have created the info-object which is char 60 which has the master data text activated.
In the DSO transformation I have mapped it to the R/3 field.
While activating the data in DSO its giving the error message
'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
How to overcome this issue.
Please advise.
Thanks in advance.

Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
TRANSLATE column TO UPPER CASE.
Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

How to track the flow of data from R/2 to BI ?

Hi Experts,
Question: How to track the flow of data from R/3 to BI ?
I want to load master data from R/3 to BI. In BI, i create an infopackage to load data from R/3. Under processing tab i set it as "PSA and then in the InfoObject (package by package)". Its a Full update.
Now, i start the update to InfoObject. The load goes on well.
Now, i want to track the flow of data from the master data table in R/3 to Datasource in R/3 then Extractors and then in the PSA in BI and then till the InfoObject. That is the complete flow of data from source table (in R/3) to Target table (in BI).
Please help me know how this can be done. (For example lets take cost element master data)
Regards,
Suraj S Nair

Hi,
Data flow :
BW :
When u right click on the Master Data Info object -> Select Data flow.Then it will show u the details like DS name,IS (If 3.x)
Once u know the DS then you need to find out the source tables for the R/3 DS.This information will get using ROOSOURCE or ROOSFIELD tables or help.sap.com.
My suggestion better to search in Help site for DS source tables.
DS Tables :
The following link will provide you the source tables for some of the LO DS.
https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 22, 2009 9:29 AM

How to determine the maximum allowable length of a filename for Window ?

Hi all,
Could I know how to determine the allowable file length (the length of the absolute path) for a file in Window environment?
Due to some reason, I generated a zip file with a very long filename ( > 170) and put in a folder(the length of the folder path around 90). The length of the absolute path is around 260.
I used FileOutputStream with the ZipOutputStream to write out the zip file. Everything is working fine while i generating the zip file.
However, while i try to extract some files from the zip file i just created, i encountered the error
java.util.zip.ZipException The filename is too long.
I am using the class ZipFile to extract the files from the zip file like the following
String absPath = "A very long filepath which exceed 260";
ZipFile zipF = new ZipFile(absPath); //<-- here is the root causeIs it possible to pre-determine the maximum allowable filepath length prior i generate the zip file ? This is weird since i got no error while i created the zip file, but have problem in extracting the zip file ......
Thanks

Assuming you could determine the max, what would you do about it? I'd say you should just assume it will be successful, but accommodate (handle) the possible exception gracefully. Either way you're going to have to handle it as an "exception", whether you "catch" an actual "Exception" object and deal with that, or manually deal with the length exceeding the max.

How to increse the info object length from 60 to 240

Similar Messages

Maybe you are looking for