How to insert a page within a document

I need to insert an additional page within a document without reformatting my layout.
How do I do that?
--- So far "Insert" > "sections" > "text page or blank" puts the additional page at the end of the doument.
Tips anyone?
(Pages 09 version 4.3)

Luanne,
When you Insert a Section from the Add Section tool or the Insert Menu, the new section will be inserted directly after the current section, the section that the Insertion Cursor is in, or the Section Selected in the Thumbnails pane.
You can't insert a new section in the middle of an existing section, so it goes at the end of a 1-section document, which is what I would guess you have, a 1-section document. What you probably should do is insert a Section Break at the point where yiu want to add a section or page. Or forget about adding a Section and just Insert a Page Break there.
Jerry

Similar Messages

  • How to insert Tab Pages into a document

    I have a print job, where I need to insert tab pages into a document. Is there a tab template that I can insert into the Indesign document? If not, how can I create tab pages in Indesign?

    When I used to do tabs I would set up a page that was as wide as the tab sheet including the tab, then add text frames in each tab position.

  • How do I move pages within a document?

    I have a manual I created for work and I want to reorder the pages. I want a move a section to the beginning but when I try to move the pages, it moves multiple pages at once. There is a yellow box surrounding the pages affected. I don't know how to change or remove the box.
    THanks in advance!

    You may only move a section (as indictaed by the yellow border) as a whole.
    Sections are separated by section breaks. So if you want to further divide your book, insert a Section Break as needed.
    Text flows from page to page in a Word Processing document, it is unrealistic to think of them as random pieces of paper to be shuffled on whim. That would have the same effect as tearing out individual pages in a real book and pasting them in somewhere else.
    Peter

  • Pages 5.2 - When I try to reorder different pages it just takes all the pages within the document and turns them into a stack! Why is this happening and how can I oder pages as the update is meant to let me?

    When I try to reorder different pages it just takes all the pages within the document and turns them into a stack! Why is this happening and how can I oder pages as the update is meant to let me?
    Any Help?I know the update has only been out a while but if anyone has an idea why it is doing this, please let me know!

    But you are telling me something I already know.
    Be precise.
    It is not Pages '09 that is broken.
    I am back in Mavericks and testing Pages 5.2.
    There are improvements, we shall see how useful, but in less than a minute I have already discovered bugs.
    Peter

  • How to insert a pages document into another pages document?

    How can I insert a pages document into another one?
    How can I insert 1 page of a document into another document?

    Open your files & show thumbnails. Sections have a yellow border around all of the pages in that section. Now click on the page in the thumbnail pane & copy. If the file is more than one page & you only want one, you'll need to insert a section break to separate the pages. Then go to your other file, click in the thumbnail pane & paste. The whole copied page will be pasted in. Repeat with another section. Styles will copy over with the sections but headers & footers will not.

  • How to add blank page to existing Document In Adobe Dc

    how to add blank page to existing Document In Adobe Dc Pro

    Hi thashrifs16749461,
    You can add a blank page using Adobe Acrobat DC by following the below instructions :-
    1) Open your existing pdf document in Acrobat DC.
    2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
    3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
    *Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
    In case if you experience any issue or have any query please let us know. We will be happy to help you.
    Regards,
    Aadesh

  • Rotating pages within a document

    how do I rotate a page within a document?  Majority of document is portrait, and there is one page that is landscape.

    You can rotate pages with Adobe Acrobat, not Adobe Reader.

  • HT204053 how do i move page and numbers documents from one icloud login to another?

    how do i move page and numbers documents from one icloud login to another?
    I had to change my email address whcih meant new apple login.
    I have a number of docs in iwork/pages and iwork/numbers.  How do I transfer them to my new login?

    There's a couple of ways but my tip backing up your documents in the cloud is as good as any.

  • How to insert a Page Break Programatically ?

    Hello,
    How to insert a Page Break Programatically ? Please Help..
    Regards,
    Aanta
    Message was edited by:
    user526601

    Hi Praveen,
    Thanks for the reply...
    I think <?split-by-page-break?> syntax is used in a loop. In my case i need to check the condition.. if its true i need to insert Page break.
    I have requirement Like as follows
    - In the Invoice Print Report I need to display “Invoice Appendix” On the Last Page of an Invoice.
    - If I am running for multiple Invoices then Invoice Appendix should print on last page of each Invoice.
    As I'm using XMLP 5.6.1, i'm unable to use <?start@last-page:body?> syntax. So i'm trying to achive this as i'm explaing below.
    Invoice Header
    Invoice Lines
    end Of Lines
    If Invoice_Appendix_flag = 'Yes'
    ---------------<Page Break>------------------
    New Page(Or Last Page)
    Start Of Invoice Appendix
    End Of Invoice Appendix
    End Of Header

  • NUMBERS: How do I delete pages within a sheet?

    Using NUMBERS:  HOW DO I DELETE PAGES WITHIN A 'SHEET' ?

    You may want to try posting this question over in the Numbers forum, here.

  • How can I convert page points into document points??

    Hello,
    How can I convert page points into document points? any API?
    I have found 2 APIs
    AIDocumentViewSuite::ArtworkPointToViewPoint( ) and
    AIDocumentViewSuite::ViewPointToArtworkPoint( )
    but I dont know what is view point and art work point.
    I think artwork point = page points and view points = document points. am I correct ???

    What do you mean by 'document points'? Do you mean document units? Like centimeters or inches? If that, there's no API to do (well, kind of in AIUser.h, but that gives you back a string with a unit suffix). Frankly, its pretty easy to just figure out the conversion values for each type of ruler unit -- there are only five or so you need -- and then write a dinky function that takes a value in one or the other, looks up the current document unit and uses that to convert the value (one function for each way). You just need to figure out everything in terms of points (since pixels == points) -- in that regard, it probably helps to know that 72 pt == 1 inch. From that you can figure out pointer-per-inch|centimeter|millimeter|pica.

  • How do i get pages to read documents

    I have Irlens syndorm which makes reading on the computer difficult. So how do i get Pages to read documents to me?

    Select the text you want spoken.
    Press the system-wide Hot-Key set in:
    System preferences > Speech > Text-to-Speech
    The defalut key is Option+Escape
    An additional feature, VoiceOver, is available to read all on screen Items in a different way. It is enabled in
    System preferences > [Universal] Access

  • How do I move a section of Pages within a document ?

    Hi there,
    I am writing my thesis and I want to move a group of 6 pages (representing a chapter) from one area of my document to another. I inserted a 'Section Break' at the end of the page preceeding the first page of my grouping, and inserted another at the end of the 6th page of my grouping. I've done this for all the chapter groupings of my document.
    When I look at the thumbnail view on the side of the document, I can see that each chapter grouping is enclosed by a yellow line box if I click on a page within the chapter grouping. So far so good, I think. Except now when I click of one of those groupings and try to drag it and insert it in between two other other chapter groupings i.e. I'm trying to reorganise my chapter order, it doesn't move the section I want to move at all.
    Can anyone tell me what I'm doing wrong ? Thanks in advance.
    Matt.

    Thanks for your advice Peter.
    I continued to play around with trying to move the sections around (I didn't change any sectioning to what I had previously done). I found out - and I don't know why - that I could not move sections upwards as I was trying to do...only downwards.
    So I eventually reorganised my sections by strategically moving them downwards until I had the document looking like I wanted it to. Still strikes me as odd. It was like doing one of those puzzles, deciding which block goes where without moving up, in as few moves as possible - but I eventually got it done.

  • Can't figure out how to insert an html within my template

    I've searched, but perhaps I am not using the correct terminology. I apologize if this has been addressed elsewhere.
    We have a vendor who is trying to mimic my webpage for our customers who sign on to her service. My problem is that I don't like having versions of our webpage outside our organization because I'll have to get them to update every time I make a change to our page. I know it will be forgotten at some point. What I'd like to do is set up a page on our site and insert their html content page within my template framework. There is a form that needs to link to their site so it needs to live on their server. I tried inserting an html, but it didn't work. I know in the olden days I used to be able to do this in PageMill. Now, I just can't figure out how to do it. Does anyone know the secret?
    Here is a sample page on my site showing what I'm trying to do: http://www.franklinebranch.com/TEST.html. I'm using DW CS5.
    Thanks for any suggestions. Anna

    That's what I was afraid of. Is IFrame a separate program?
    This is the vendor page: https://secure.powerpay.biz/r/fsb.aspx

  • Inserting a page into a document

    I hate sections but whether I designate a Section or not, the program just goes ahead and does it. Then if I need to insert a page after the initial layout, and can't do it. Is there a work around here?

    Whatever version of Pages you are using (you haven't said) does not create Sections, you do.
    Sections do not make it impossible to insert extra pages or reorder existing pages.
    A Section Break is an invisible character inserted into the document, dividing it into what it says; "sections" (chapters if you will).
    A Section is a series of pages within a Word Processing document that share Headers and Footers, Layout and background images.
    The Section can be dragged into a different order in the Thumbnails, but the pages within the section do not change. They move together, otherwise you would scramble your text.
    Peter

Maybe you are looking for