How to insert a record in ROOSPRMSC table? (accidentally deleted)

Calling an InfoPackage in BW causes short dump, while fixing the short dump issue, accidentally
deleted the "ROOSPRMSC" table entries.
Could you tell me how to insert a record in "ROOSPRMSC" table???

Hi Senthil,
Regards,
Phani Raj Kallur
Message was edited by: Phani Raj Kallur

Similar Messages

How to insert some records in one table and some records in another table

Interview question
how insert records in two tables by using trigger
CREATE or REPLACE TRIGGER Emp_Ins_Upd_Del_Trig
BEFORE delete or insert or update on EMP
FOR EACH ROW
BEGIN
if UPDATING then
UPDATE emp2
SET
empno = :new.empno,
ename = :new.ename
--, job = :new.job
--, mgr = :new.mgr
--, hiredate = :new.hiredate
, sal = :new.sal
--, comm = :new.comm
--, deptno = :new.deptno;
sdate = :new.sdate,
edate = :new.edate
end if;
if INSERTING then
INSERT INTO emp2
VALUES
( :new.empno
, :new.ename
--, :new.job
--, :new.mgr
--, :new.hiredate
, :new.sal
--, :new.comm
--, :new.deptno
new.sdate,
new.edate);
end if;
if DELETING then
DELETE FROM emp2
WHERE empno = emp2.empno;
end if;
END;
it is working fine but he wants to insert some specific litimit on one table and some specified limit of records in one ..
In this senerio can i insert records by use count of records...
please help me..

Can you be more specific on the "Limit"
Conditional insert can be used in this case.

How to insert multiple records into a table?

hi all
i have a table that name is : TiketsItem
now i want to 100 records insert my table
for example : TicketsHeaderRef=52000
Active=False
TicketsItemId=45000 to 45100
how to insert TicketsItemId 45000 to 45100 in my table
thanks all
Name of Allah, Most Gracious, Most Merciful and He created the human

So, you just want to insert the serialized data into the table, without useDate or WKRef? I'm assuming these values will be updated later?
Try something like this:
DECLARE @TicketsHeader TABLE (TicketsItemID BIGINT, ticketsHeaderRef BIGINT, active BIT, useDate DATETIME, WKRef SMALLINT)
DECLARE @startInt BIGINT = 45000
WHILE @startInt <= 45100
BEGIN
INSERT INTO @TicketsHeader (TicketsItemID, ticketsHeaderRef, active)
VALUES (52000, @startInt, 0)
SET @startInt = @startInt + 1
END
SELECT *
FROM @TicketsHeader
thanks
i edited your codes:
DECLARE @TicketsItem TABLE (TicketsItemID BIGINT, ticketsHeaderRef BIGINT, active BIT, useDate DATETIME, WKRef SMALLINT)
DECLARE @startInt BIGINT = 45000
WHILE @startInt <= 45100
BEGIN
INSERT INTO @TicketsItem (TicketsItemID, ticketsHeaderRef, active)
VALUES (@startInt,52000 , 0)
SET @startInt = @startInt + 1
END
when i execute:
SELECT * FROM TiketsItem
i do not see any records inserted in TiketsItem
how to solve it?
Name of Allah, Most Gracious, Most Merciful and He created the human

How to insert new record into altered table

I am using JDBC with MySQL. I altered existing table and want to insert new record using java class. But it is not possible.How to do?

How is it "not possible"?
Either modify the Class for the new fields, or give the new fields default values (if applicable). If the type of an existing column has changed, then only the first option is available.
Where's the problem?

How to insert new record into oracle table from GridView in VS2005.

I need to insert records into Oracle10g table from VS2005 GridView using the Insert Method in Business Logic Class. The Update and Delete Methods are working fine. What's the best way out?

How is it "not possible"?
Either modify the Class for the new fields, or give the new fields default values (if applicable). If the type of an existing column has changed, then only the first option is available.
Where's the problem?

How to insert bulk records in a table

Hi to all,
I have one view in which more the 3 lacks records are there and i have to insert that data in a table and used the code in which it taking a lot of time.
I checked one case in which 2000 records are there it taking 5 min apprx. to insert it
Is there any solution to insert the bulk data in a short period of time.
Below code i used to insert
procedure ticket_previous_detail (p_err_msg out varchar2) is
type t_type is table of ticket_previous_details%rowtype;
v_tab t_type;
PRAGMA AUTONOMOUS_TRANSACTION;
begin
SELECT * bulk collect into v_tab
from ticket_previous_details; (It contains 3 lacks record)
FORALL x in v_tab.First..v_tab.Last
INSERT INTO xx_prev_tckt ( Insert in this)
VALUES v_tab(x) ;
p_err_msg := 'Successfully Inserted';
commit;
exception
when others then
p_err_msg := sqlerrm;
rollback;
end ticket_previous_detail;
Thanks in advance!
Edited by: Oracle Consultant on Apr 14, 2011 3:42 PM
Edited by: Oracle Consultant on Apr 14, 2011 3:42 PM

Oracle Consultant wrote:
Hi to all,
I have one view in which more the 3 lacks records are there and i have to insert that data in a table and used the code in which it taking a lot of time.
I checked one case in which 2000 records are there it taking 5 min apprx. to insert it
Is there any solution to insert the bulk data in a short period of time.
Below code i used to insert
procedure ticket_previous_detail (p_err_msg out varchar2) is
type t_type is table of ticket_previous_details%rowtype;
v_tab t_type;
PRAGMA AUTONOMOUS_TRANSACTION;
begin
SELECT * bulk collect into v_tab
from ticket_previous_details; (It contains 3 lacks record)
FORALL x in v_tab.First..v_tab.Last
INSERT INTO xx_prev_tckt ( Insert in this)
VALUES v_tab(x) ;
p_err_msg := 'Successfully Inserted';
commit;
exception
when others then
p_err_msg := sqlerrm;
rollback;
end ticket_previous_detail;
Thanks in advance!
Edited by: Oracle Consultant on Apr 14, 2011 3:42 PM
Edited by: Oracle Consultant on Apr 14, 2011 3:42 PMAssuming that your target table(xx_prev_tckt ) will have same strcture as of source table (ticket_previous_details)
CREATE TABLE xx_prev_tckt AS (SELECT * FROM ticket_previous_details);Later create index on the above table and start working...
Hope this helps.
Regards,
Achyut

How to insert a record in another table

Hi,
Can you please help with this urgent problem.
Suppose my data model is
SELECT id
FROM emp
WHERE salary < 10000
I would like to create a record in another table for EACH emp.id returned, I wonder which trigger is appropriate to place the INSERT statement?
And I DON'T want to do like this
SELECT id, Create_Record(:id)where Create_Record is a function.
Hope the information here is sufficient.
Thanks

Hien
I had a similar requirement to you and put the code on a push button. In my case the reports are being run interactively to the screen and then printed, and I have no way to know whether the report had actually been printed, so we rely on the user pressing the button. Of course there is a danger that the user forgets to press the button, but in our situation that would not be disasterous. Whatever method is used, I don't think there is any way to be sure that it has actually come out of the printer.

How to insert multiple records in DB table

HI Experts,
Jdev 11.1.2.3
I have requirement where my form belongs to two different tables (TableA and TableB).
In this form am using ADF shuttle component. The number of values i select in shuttle component same number of records to be inserted in TableB with each value.
on commit TableA and TableB both should be commited.
Thanks,
Nitesh

Hi,
You can use a managed bean as the target of the value property of the shuttle component. Then in a value change listener you read the selected values and manually update the model. For this you could e.g. expose two view objects (one for each table) as an iterator to the PageDef file, access it from Java and then call dcIteratorBindingInstance.getRowSet().createRow() to create and populate new rows
The above is a bit rough in the outline, but so is the question
Frank

Inserting new records into database table at runtime

Hi all ,
How to insert new records into database table at runtime on click update?
Thanks.

Hi Sasikala,
Just for your understanding am giving a sample code snippet which you can use to read the contents of your Table UI element & save the data on to your database. Suppose you have a button up on pressing which you want to read the data from your screens table & save on to the database then you can proceed as shown below:
1) Obtain the reference of your context node.
2) Fetch all the data present in your table into an internal table using methods of if_wd_context_node
3) Use your normal ABAP logic to update the database table with the data from your internal table
In my example I have a node by name SFLIGHT_NODE and under this I have the desired attributes from SFLIGHT. Am displaying these in an editable table & the user would press up on a push button after making the necessary changes to the tables data. I would then need to obtain the tables information & save on to the database.
data: node_sflight           type ref to if_wd_context_node,
        elem_sflight           type ref to if_wd_context_element,
        lt_elements            type WDR_CONTEXT_ELEMENT_SET,
       stru_sflight           type if_main=>element_sflight_node,
       it_flights             type if_main=>elements_sflight_node.
"   navigate from <CONTEXT> to <SFLIGHT_NODE> via lead selection
    node_sflight_node = wd_context->get_child_node( name = 'SFLIGHT_NODE' ).
   lt_elements = node_sflight->get_elements( ).
"   Get all the rows from the table for saving on to the database
    loop at lt_elements into elem_sflight.
      elem_sflight->get_static_attributes( importing static_attributes = stru_sflight ).
      append stru_sflight to it_flights.
    endloop.
" Finally save the entries on to the database
    modify ZSFLIGHT99 from table it_flights.
    if sy-subrc eq 0.
endif.
However a word of caution here.... SAP doesn't ever recommend directly modifying the database through an SQL query. You would preferably make use of a BAPI for the same. Try go through Thomas Jung's comments in [here|modify the data base table which is comming dynamiclly;.
Regards,
Uday

How to insert null record (some col) in table using loop

Hi,
How to insert null record (for some columns) in table using loop.
sample data of x_tab
order_id order_name
231 xxx
123
345
111 vvvv
Thanks,
Lakshman
Edited by: kolipaka on Jul 5, 2012 1:37 PM

You have a table
   CREATE TABLE tab (
      col1 NUMBER,
      col2 NUMBER,
      col3 NUMBER,
      col4 NUMBER
      col5 NUMBER)Now you insert:
   INSERT INTO tab (col2, col4) VALUES (5, 7);col1, col3 and col5 are NULL by default (there is no DEFAULT clause for these columns so they are NULL).

How to Insert a record in a database table in debugging mode in production

Hi,
How to Insert a record in a database table in debugging mode in production ?
Waiting for kind response.
Best Regards,
Padhy
Moderator Message : Duplicate post locked.
Moderator message : Warning. Don't create multiple threads for same question.
Edited by: Vinod Kumar on May 12, 2011 11:02 AM
Edited by: Vinod Kumar on May 12, 2011 11:04 AM

Hi Senthil,
Regards,
Phani Raj Kallur
Message was edited by: Phani Raj Kallur

How to insert multile records at a time in same db table

Hi All,
I want to insert more than one record in db-tabe.As ADF-Form /ADF-Creation form will insert only one record at time is there any way to insert multiple records using ADF-Table
Thanks in Advance
Regards
RHY

See the following section in the ADF Developer's Guide for Forms/4GL Developers for some insights on this:
(*) 10.4.3 When to Use CreateInsert Instead of Create
You can find the guide on the ADF Learning Center here:
http://www.oracle.com/technology/products/adf/learnadf.html

Insert multiple records into a table(Oracle 9i) from a single PHP statement

How can I insert multiple records into a table(Oracle 9i) from a single PHP statement?
From what all I've found, the statement below would work if I were using MySQL:
     insert into scen
     (indx,share,expire,pitch,curve,surface,call)
     values
     (81202, 28, 171, .27, 0, 0, 'C' ),
     (81204, 28, 501, .25, 0, 0, 'C' ),
     (81203, 17, 35, .222, 0, 0, 'C' ),
     (81202, 28, 171, .27, 2, 0, 'C' ),
     (81204, 28, 501, .20, 0, 1, 'C' ),
     (81203, 28, 135, .22, 1, 0, 'C' )
The amount of records varies into the multiple-dozens. My aim is to utilize the power of Oracle while avoiding the i/o of dozens of single-record inserts.
Thank you,
Will

You could look at the INSERT ALL statement found in the documentation here:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_913a.htm#2133161
My personal opinion is that you probably won't see any benefit because under the hood I think Oracle will still be doing single row inserts. I could be wrong though.
The only way to confirm was if you did a test of multiple inserts vs an INSERT ALL, that is if the INSERT ALL met your requirements.
HTH.

How to insert multiple records?

I have dynamically checkboxes, which get the data from database. I have used a FOR loop to store each value of the checkbox to session variables, i.e.
session.setAttribute("Slangs"+a,request.getParameter("langsID"+a)); (p/s: a is a counter, I also set a hidden variable to store the number of record in DB)
Now, I wanna insert these records to the table called CusLangs which has CusID(PK) and Langs(PK). I wanna construct a insert.jsp, so that those checkboxes that I selected can be written into table CusLangs.
Anyone know how to do that?
Thanks.
From
jeff

You have a checkboxes with the same name in your html/jsp.When you post to a servlet/jsp, use request.getParameterValues("checkboxname ) to get String [], ie.
<html>
<input type="checkbox" name="sampleCheck" value="1">
<input type="checkbox" name="sampleCheck" value="2">
</html>
Servlet/ JSP
String check[] = request.getParameterValues("sampleCheck");
query = "Insert into CusLangs (CusID) values (?') ";
stmt = connection.prepareStatement(query);
for(int i=0, i < check.length, i++) {
stmt.setString(1, check[0]);
int x = stmt.executeUpdate();
Hope this will help.

Triggers to insert the record in a table

I have two table 1. Holiday 2. Attendance.
When I insert the record    in holiday table for his
advance holiday   with empid, the same time I want to insert it attendance table
automatically for the same date using a trigger
Insert into attendance (empid,date,holiday) values (20078,07/10/2014,1). If holiday column value 1 represent holiday marked,
0 represent holiday not marked. The same thing can happen vice versa
If employee mark his current attendance as holiday through attendance,
it should   be inserted into holiday table
automatically using triggers.
Insert into Holiday (empid,date,holiday) values (20078,06/08/2014,1). If holiday column value 1 represent holiday marked,
0 represent holiday not marked. The same thing can happen vice versa
Please I am looking for your help , how I can make it using triggers
to insert both table in two different ways of options.
Regards
Pol
polachan

Hi polachan,
According to your description, if you want to synchronize the data between the holiday table and the attendance table while inserting records into holiday table, you need to create a trigger on the holiday table, please try the following syntax.
use <databasename>
go
create trigger Tr_holiday
on holiday
for insert
as
declare @empid varchar(20),
@date datetime,
@holiday int
select @empid = empid, @date=date, @holiday=holiday from inserted
declare @qty int
select @qty =count(*) from attendance where empid=@empid and date=@date and holiday=@holiday
if @qty<1
begin
insert into attendance
select i.empid,
i.date,
i.holiday
from inserted i
end
Meanwhile, if you want to insert the record into the holiday table when holiday is updated to 1 in the attendance table, you need to create another trigger on the attendance table, please try the following syntax.
use <databasename>
go
create trigger Tr_attendance
on attendance
for update
as
declare @holiday int
if update (holiday)
begin
select @holiday=holiday from inserted
if @holiday=1
begin
insert into dbo.holiday
select empid,
date,
holiday
from inserted
end
end
For more details about creating triggers in SQL Server, please review this article:
CREATE TRIGGER (Transact-SQL).
Thanks,
Lydia Zhang

How to insert a record in ROOSPRMSC table? (accidentally deleted)

Similar Messages

Maybe you are looking for