How to insert a sound recording and save it to iTunes?

How to insert a sound recording and save it to iTunes?
I have 5 voice recording on my iPhone, but the fifth was not detected on iTunes.So i can't sync

 
Hi,
According to my analysis, for Digital Signatures: Adobe has changed the behavior around digital signatures and SharePoint-hosted PDF files. Now, when digitally signing a SharePoint-hosted PDF file, it will be saved directly to SharePoint if that PDF file
is already checked out. If not, the user will be prompted to check it out. When digitally signing a SharePoint-hosted PDF file in Acrobat X, Version 10.0, the user would be prompted to save that file locally and would then need to upload it separately to SharePoint
as a new version.
I suggest that you use Acrobat X, then check the result. For more information about Acrobat X, please refer to
http://blogs.adobe.com/pdfitmatters/2011/06/whats-new-in-acrobat-x-version-10-1.html
In addition, you can also consider the following third-party tool:
http://www.arx.com/digital-signature/sharepoint
Thanks,
Rock Wang

Similar Messages

  • How can you create a voice recording and save it as an mp3?

    I want to create a voice recording and save it as an mp3.  How can I do that on the MAC?  Right now I can only think of recording the voice in iMovie, but it does not have a choice to save as an mp3.

    Rather that iMovie, you may want to check our Audacity.
    It's a free, open-source audio editor and recorder.
    You can easily save a recording as an MP3.
    http://audacity.sourceforge.net/
    Matt

  • How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?

    How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?  I would like them to open at the size they were previously resized like they used to in previous operating systems.  They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it.  Any help would be appreciated.

    hi Prasanth,
    select werks matnr from ZVSCHDRUN into table it_plant.
    sort it_plant by matnr werks.
    select
            vbeln
            posnr
            matnr
            werks
            erdat
            kbmeng
            vrkme
            from vbap
            into table it_vbap
            for all entries in it_plant
            where matnr = it_plant-matnr and
                  werks = it_plant-werks.
    and again i have to write one more select query for vbup.
    am i right?

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • How to restrict the last record and not moving to next reocrd

    1) how to restrict the last record and not moving to next reocrd.
    2) Also for the F6 key(for new record).

    When you are on the last record, next-record will create a new one, so that my question is do you want to forbid new record creation.
    Francois

  • How to loop through report records and update the record

    I have a updateable report. And there is a select LOV in that report. How to loop though the report and save all the changes to the LOV.

    1. Please tell us your first name and put it in your handle and/or profile to help us.
    2. Explain your question in more detail, perhaps with an example and by showing code you already are using.
    Scott

  • Where is the sound recorder and notes on Z3?

    Where is the sound recorder and notes on Z3?

    I have checked a couple of units here and no preinstalled note application on them either. However there are a large number of small and free notepad type applications that can be installed via the Playstore with little effort.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • I have a custom template.  When I edit it and try to save it asks me to name it and then I end up with an additional custom template.  How do I edit the template and save the changes without creating another template?

    I have a custom template.  When I edit it and try to save it asks me to name it and then I end up with an additional custom template.  How do I edit the template and save the changes without creating another template?

    Hi Atrec,
    If you don't need your old custom template, save your changes with the same template name. It will tell you that this template exists and will ask you Replace? Say yes (if you do want to replace the old with the new!)
    To delete unwanted templates, go to Finder > Menu > Go and press the option key. Your Library will show in the Go Menu. Navigate to Library > Application Support > iWork > Numbers > Templates > My Templates.
    Delete any unwanted template by dragging it to the Trash or click on it then command-delete.
    Having gone to all that trouble to find My Templates folder, right click (or control click) on it and Make Alias. Drag the Alias to any convenient place for a quick way to get back to that folder.
    Regards,
    Ian.

  • HT4623 what if i download iOS 7 and save in my itunes on my computer, how can i install later

    what if i download iOS 7 and save in my itunes on my computer, how can i install later

    Simply connect your iPad and it will prompt you to update.

  • How to scan with capture image and save 10.6.8

    how to scan with capture image and save 10.6.8 ?

    Instructions for using Image Capture for this available via the 2nd section.
    http://support.apple.com/kb/HT2502

  • How to I scan a document and save it to my computer?

    I just bought a PIXMA MG2920. How to I scan a document and save it to my computer? There is no buttons on the front, just the print buttons.

    Hi jmkj1234,
    To scan with your PIXMA MG2920, the IJ Scan Utility can be used.  To view how to scan, please use the following link:
    http://ugp01.c-ij.com/ij/webmanual/ScanUtility/W/MG2900%20series/1.1/EN/SU/su-004.html
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HT2929 How do I transfer vinyl recorded on a PC to iTunes?

    How do I transfer vinyl recorded on a PC to iTunes?

    What format was it recorded on?  Wav? MP3? 
    If so, just use the Add File To Library or Add folder to Library options in iTunes File Menu.
    iTunes: About the Add to Library, Import, and Convert functions - Apple Support

  • I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version.  How do I update my PHONE and why is an itunes update being confused for my iphone?

    I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version.  How do I update my PHONE and why is an itunes update being confused for my iphone?

    You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.

  • How cna I change the text and background colours in iTunes?

    Can anyone tell me how I can change the text and background colours in iTunes? I am a visually impared user and my main requirement on a PC is to change the colour schemem to white text on a black background. Most software adopts the settings of your colour scheme but iTunes goes it's own and has everything on white backgrounds. I cannot read from white backgrounds (dazzle - that sort of thing). I have never used iTunes for this reason. I have always been a devotee of by far the best media player out there Musicmatch Jukebox, who allow you to edit skins in every detail. However, recently Musicmatch was taken over and users were forced to migrate to the ridiculously poor Yahoo Music Jukebox. A massive downgrade in so many ways.
    I want to use iTunes but will not be able to if I cannot sort this issue out. I downloaded 7.5 before discovering that if you want to use Multi Plugin for skins you need to go back to iTunes 7.02. I've done that, but the skins available are completely pointless to my eyes. They don't change the colours of the main components, just the graphical bit at the top.
    What I need to do is change the background of the main browser windows so that they are black and the text is white (you know the track lists and tree views, etc). This must be a very simple case of just changing the codes somewhere, but I can't find where. I read somewhere that you need to hack into something call ResourceDB inside a file called iTunes.jar. There is no such file on my PC. Could that be a Mac thing?
    Please help someone if you can. I would like to become an iTunes user. There seems to be more music available than on Napster which I currently use.
    Thanks in advance
    Z

    In my opinion, it seems that Apple has decided to sacrifice usability so that iTunes would look more like a Mac application. You are probably already aware that using Windows' built-in high-contrast settings do not work in iTunes.
    I did some hacking at the resource file a while back, but I was unable to figure out how to change the color of the background. IIRC there was a resource whose description indicated it would change the background color, but when I changed the resource, nothing happened.
    I was, however, able to figure out how to make the "large" font much larger (any size you want, I suppose). Will that help? See
    http://home.comcast.net/~teridon73/ituneshacks/index.html
    You should provide feedback to Apple:
    http://www.apple.com/feedback/
    I don't think it is too harsh to call it "shameful" that Apple has chosen this design path. Where I work, we are required to make ALL applications (or any computer interface, such as a website) section 508 compliant. Of course, I'm being a bit of a hypocrite, because I've made no effort to make my website compliant. If you have trouble reading it, please let me know.

  • How you can sync your contact and your mail with iTunes 11 as it's not there anymore ?

    How you can sync your contact and your mail with iTunes 11 as it's not there anymore ?

    ~ means your Home directory. Using the command above takes you to the Home directory on the boot drive.  Your backup files are now on another drive in a directory that used to be your Home but is now a subfolder of Users so you have to specify that drive after the /Volumes, then the user name, then the rest to go there
    I use OSX 10.4.11 and on it the libraries are still visible.  There's two at least.  One general one at the top level of the boot drive and another for each user (the one with the ~).  I think they made at least one of them invisible with newer OS versions.

Maybe you are looking for