How to insert audio – not overwrite – in multitrack view

Very often, I need to insert audio into a project. This means all tracks after the insert need to be pushed back along the timeline to make way for this. (As happens in PP when inserting a clip from the source monitor into the timeline.) I used to use Digigram's Xtrack, which has been able to do this since 15 years ago. The only way it seems possible in Audition is to insert silence that's exactly the same time length as the audio I want to insert, then add the audio to the space that has just been created. Fine if it's a one-off, but I need to do this regularly and it's pretty cumbersome. Any way to speed up this operation?

Yes, it is a limitation. Generally the easiest (and almost certainly the quickest) way to do this isn't to bother with inserting time - just group all the clips after the point you want to insert, drag the lot forward along the timeline, insert your new clip, then drag them back again to the end of it. No it's not perfect - but it works.

Similar Messages

How to insert a NOTE (GOS) foe a given Material No 4711 (BUS1001006)

Hi,
i'm looking for an FM or CL to insert a NOTE for a given Material No.
I have tried SO_OBJECT_INSERT and CL_GOS_DOCUMENT_SERVICE->CREATE_NOTE, but i don't know
the import for Material No.
CL_GOS_DOCUMENT_SERVICE->CREATE_NOTE needs IS_OBJECT like BORIDENT.
Thanks.
regards, Dieter

HI Stephen,
I have the same prolem. I modified the 5 global tables, but I don't see the new line in the screen.
Can you help me with some details?
Thx!
Mihaela

Imported files not appearing in multitrack view

I'm using Audition 3.0.
Someone else used my computer and I believe they changed a default setting. When I import an audio file it only opens in the edit view. When I try to import into the multitrack view the file doesn't appear in the file panel (but it does open in edit view). Is there a setting to open in multitrack view as the default? I can't figure out why the file(s) don't appear in the multitrack file panel.
Thanks!

Thanks for your reply.
1. Yes, I am on a Mac using the latest operating system 10.7.4 (Lion). I'm using a less than 2 year old iMac 27". I have been using Dreamweaver for several years from about CS3 - before that I used Adobe GoLive.
2. Yes, I installed the trial CS6 without any errors. I have installed it twice now.
3. Yes, this is correct. I have taken four screen shots for you to see. The first one is one of my websites in CS 5.5. The second is looking into the 'images' folder in CS 5.5. The third shot is the same as the first shot but as seen in CS 6 and th fourth is the same as the second but as seen in CS 6. You will see that the image files stop in the 'C's and the scroll bar is still close to the top so that nothing below the images folder will display when I scroll down beyond the bottom of the images folder.
You can see some of the missing filenames from the second photo. They are all jpg files in this case although html and pdf files are missing further down.
The path to my local sites is ~user/Dropbox/Sites/sitename folder (I have three different folders for three different sites).
1.
2.
3.
4.
I also found in the process of trying to upload these screen shots that you can't add images using Safari. I had to use Chrome. The 'insert' button doesn't work in Safari.

How to stop Jdeveloper to overwrite my customized view object impl

Hi,
Does anyone know how to stop Jdeveloper to overwrite my view object impl which extends from some customized view object impl ?
Thank you.

"modifying something on the view object".
Do you mean, modifying the ViewObject from the Applications Navigator using the Edit Mode of JDeveloper on that ViewObject?
(or)
Directly modifying the Extended ViewObject Implementation class file in System Navigator?
If you edit your ViewObject class file and if you set the ViewObject to extend it from a Customized View Object Impl, unfortunately the model project of Jdev do not recognize it, becoz certain changes are required in xml (viewobject's definition file).
So, better extend the class from the customized impl in Edit mode of that ViewObject.

How to create LOV not based on a View Object attribute?

Hi,
I am creating a handed-made search form and I want to create an af:inputListOfValues.
I have :
- a read-only-view-object to get the LOV values from BD.
- af:inputListOfValues tag (droped from Component Palette).
How can I create the listOfValuesModel in Bindings layer? (the inputListOfValues is not based on a View Object attribute).

Sorry, I think I am not very clear in my posts.
My requirement is to create a LOV but I have no ViewObject. I just want an input (not based on a view object attribute), alone, but with a LOV (where lov's datas are get from a view object).
In a "normal" LOV I would have something like this :
in jsff :
<af:inputListOfValues id="departmentIdId"
                            popupTitle="Search and Select: #{bindings.DepartmentId.hints.label}"
                            value="#{bindings.DepartmentId.inputValue}"
                            label="#{bindings.DepartmentId.hints.label}"
                            model="#{bindings.DepartmentId.listOfValuesModel}"
                            required="#{bindings.DepartmentId.hints.mandatory}"
                            columns="#{bindings.DepartmentId.hints.displayWidth}"
                            shortDesc="#{bindings.DepartmentId.hints.tooltip}">
        <f:validator binding="#{bindings.DepartmentId.validator}"/>
        <af:convertNumber groupingUsed="false"
                          pattern="#{bindings.DepartmentId.format}"/>
      </af:inputListOfValues>in pageDef :
<listOfValues StaticList="false" IterBinding="EmployeesView1Iterator"
                  Uses="LOV_DepartmentId" id="DepartmentId"/>in model layer : a view object (EmployeeView) with view accessor and LOV based attribute, and a read only view object (DepartmentRVO) to get datas for the LOV.
But in my case I have no ViewObject, so I don't know how to create the listOfValuesModel in fragment pageDef.
I have :
<af:inputListOfValues label="Label 1"
                                popupTitle="Search and Result Dialog"
                                id="ilov1" model="here I want to point to a listOfValuesModel but I don't know how to create it"/>in pageDef : the listOfValuesModel but I don't know how to create it.
in model layer : just a read only view object (like DepartmentRVO), to get the datas for the LOV.
Edited by: h0s on 29 févr. 2012 00:31

How to insert audio track?

how do you insert an audio track into garage band to edit? thanks

Do you mean bring pre-recorded audio into GB? If so, just drag the file into an open GB Timeline. When you see the green plus sign, drop it.

How to insert a note when a field is updated

Hello! I have an employee table, which have a company_id field. When the employee is changing it's company_id, I'd like to notify this in the note field. How can I do this? I tried to use a before update trigger,
(if :NEW.company_id <> :OLD.company_id) then
insert into employee(notes)
values('...'); but it didn't work.
Does somebody have other suggestions?
I would appreciate a lot!

Vitaly,
Is wath you are doing not the functionality of a journal table. Normaly you create for this purpose a table named 'employees_jn' for inserting the old records.
But if you want to do it in the same table you can do it with:
create package emp_pck is
   company_id number;
   first_name varchar2(100);
   last_name   varchar2(100);
end;
create or replace trigger "Employees_bur"
BEFORE
update on "Employees"
for each row
begin
   if :NEW.company_id = :OLD.company_id
   then
      emp_pck.company_id   := null;
      emp_pck.first_name   := null;
      emp_pck.last_name    := null;
   else
      emp_pck.company_id   := :OLD.company_id;
      emp_pck.first_name   := :OLD.first_name;
      emp_pck.last_name    := :OLD.last_name;
   end if;
end;
create or replace trigger "Employees_bus"
BEFORE
update on "Employees"
begin
   if emp_pck.company_id   is not null
   or emp_pck.first_name   is not null
   or emp_pck.last_name   is not null
   then
      insert into employees(first_name,last_name,company_id,edit_date)
      values(emp_pck.first_name,emp_pck.last_name,emp_pck.company_id,SYSDATE);
   end if;
end;
/Fred.

How do I MERGE, not overwrite my contacts?

I cleaned out all of the contacts in Outlook because there were many duplicates, but now when I sync, instead of it giving me the option to merge, it overwrites any contact in my phone with the blank address book from Outlook/iCloud. Wasn't there a "merge" option before?!

Actually, I think my exchange server was pushing all the contacts to it all along and that was causing some sort of conflict w/ itunes syncing and icloud... so I turned the contacts feature off in my exchange mail settings and it's working... I've read a bunch of people having issues with this.

How can I see notes in Calendar week view

Hi,
I want to be able to see any notes I add to an event in week view (without having to click on each event).
Is there anyway to do this?
Are there any Calendar Apps that can do this?
Graham

If you aren't using iCloud, you can sync Notes using iTunes.
Help here > iOS: Syncing Notes

How do I move aiff files from the viewer to the timeline-it is not working when I try to drag and click or clicking on overwrite or insert in Final Cut Pro 7. Thanks

How do I move aiff files from the viewer to the timeline-it is not working when I click and drag or when I try to move the files to the overwrite or insert buttons-Thanks.

hi
You cannot move audio from the viewer
Mark your in and out points then in the browser grab hold of the audio tracks icon and drag that to the time line
PJ

Audio CDs get "The disk you inserted was not readable by this computer"

Hi All,
This a near-duplicate of a message originally posted to the Snow Leopard forums.
A couple months ago I upgraded to 10.6.4 from Leopard and configured a Boot Camp partition running Windows 7. Yesterday I discovered that whenever I put any audio CD, retail or burned, into the Macbook's drive I now get this message - "The disk you inserted was not readable by this computer" - with the options to ignore or eject. Disk Utility displays no unusual information, but a check of the system log on Console turned up this:
Sep 8 11:05:21 Hard-Drive diskarbitrationd17: unable to probe /dev/disk1 (status code 0x00000047).
Has anyone encountered this problem before? I suspect it's related to Boot Camp but not to the initial installation - CD reading worked fine right after the install. Note that this only affects CDs - Burned and retail DVDS read without any trouble.
Michael
P.S. The CDs tested include one just out of the shrink wrap, so please, no "have you checked your CDs they may be scratched" replies.

Thanks, but no thanks. This is a software/hardware (driver?) issue, not a hardware issue alone. I kept a bootable backup copy of my 10.5.8 installation on an external drive, and a quick restart into that yields a desktop where CDs still load perfectly. I'm looking for power users with specific experience with this particular error and insights into what is causing it in 10.6.4.
Message was edited by: mlach, who is tired from simultaneously troubleshooting this and an X11 error and has forgotten how to type.

Logic Pro 9 - Not able to select plugins via Inserts / Audio Units.

Hi
I have the program Logic Pro 9 version 9.1.6 (1700.43) (32- bit)
I use plugins like for example SampleTank and Realstrat . Everything has until recently worked fine, but I now have a problem.
When I choose a plugin I usually put the mouse on the box 'Inserts', press ALT and then a menu appears. Here I, among many menu items, at the bottom see ' Audio Units ' . At this point I usually could choose, for example SampleTank , .. but now I can only choose Apple features. That is to say - I can not choose my plugins in this menu anymore.
I've been around online and search . Here I was recommended to delete a file called com.apple.audiounits.cache . I have done this, but the problem is not solved.
I also have updated the operating system with latest MacOSX10.7.5 update . This has not helped .
All my plugins are also visible in Logic Audio Units Manager, and I can see that they are being loaded when Logic starts up.
The plugins also still works in projects created within the problem occurred. That is, - I can open for example SampleTank in a track in a project that is created and a half years ago.
So the exact problem is that I, in new projects, is not able to select plugins via Inserts / Audio Units .
Can you help me solve this problem?
Regards Henrik

Hekke44 wrote:
I do not think it is very user friendly, I must say.
For users of this system, it must surely be obvious that you very often have to choose musical instruments, also from instrument plug-ins.
Yes, often. That is why it is very obvious and simple for any experienced user.
Hekke44 wrote:
Why on earth is it so complicated to choose a musical instrument? If you are not currently using this system every day, you forget the such a detail about having to press down for several seconds to select an instrument.
I do not think it is complicated at all. And you do not have to press down for several seconds. I just timed, it is 0.4 seconds of clickholding. The holding is functional: you won't load a new instrument (and possiblly loose any work you had done on your sound) just because you accidentally clicked on a slot.
Hekke44 wrote:
There should be a nice big green button on the screen that read 'Select musical instrument', - then a menu where you can choose whether it should be one of Logics musical instruments, or a plugin instrument.
It would be user-friendly.
What is your view about these things?
You are basically saying it should be dumbed down to the level of some "any-kid-or-adult-idiot-can-use-it-out-of-the-box" smartphone app. I think you are overlooking that this is a Pro program, not a toy. I think you try to blame the software for the fact that you didn't know how to operate it. You're avoiding responsability. That's my view.

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

How do I view and open all my files again that are on my external hard drive?? Error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject.

I have recently purchased Toshiba 1TB hard drive and I set it up and I was able to transfer all my files onto it such as my music, photos, documents. I had correctly ejected and used it again and all these files were safely stored and accessible afterwards. However after I rebooted my computer as it had been going slow and I had too much clogging it up once I reconnected the external hard drive I have error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject. How do I access all my files? I set it up to work on both mac and windows. I have tried both another mac and windows computer and same issue occurs?? I am worried that all my personal files are gone but am confused as the drive has had absolutely no damage to it as it was in a very short time frame and its never left the same spot. Any help would be greatly appreciated. Thanks

Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
Thanks

How to insert audio – not overwrite – in multitrack view

Similar Messages

Maybe you are looking for