How to insert independent text column in pages ?

hello,
I have made a flyer from one of the templates in pages..
What I wnat to do is insert another text colum indicated at the attachment. I just con not figure out how to do it.. It keeps insertin within the main text..
any help will be appreciated.
Gokce
oopss.. how do we attache images here ?
Message was edited by: Gokce

Gokce,
Have you tried inserting a text box? If not, click on View > Show Layout to enter the layout view. Click in the gray margin area to make your cursor disapppear. Then click on Insert > Text. The box will be defined as Fixed on Page (because you clicked in the margin area), allowing you to move it anywhere on the page. You can resize it to look just like a column, then put text in it.
Hope this helps.
-Dennis

Similar Messages

How to insert an image between two pages?

How to insert an image between two pages? and how do remove the line of separation between two pages?.
Attached image shows, there is a photo of two pages and no line of separation in the pages!

Michi Thanks, but that option is only available on one page (2 columns), not to put two pages! see new image

How to insert sales text (MM02) into a single record of a Ztable.

Hi,
I'm extracting data from different data base tables and populating a Ztable which has Matnr as primary key and sales text as a field.
I have already used READ_TEXT to display the text and it is displayed in multiple records which in turn leads to duplication of Material numbers.
Now I want to avoid duplication of records (Matnr) as this being a primary record, and display the sales text of a particular material number into one single record.
Can anyone tell me how to insert sales text (MM02) transaction into one single record.
Thanks,
Govind

sorry i am not enough clear about your requirement...
as i can understand i am explaining to you.
suppose your itab contains repaeating matnr.
matnr
1
1
2
2
2
3
3
like this.
data : text(200),
matnr like mara-matnr.
loop at itab.
call READ_TEXT fnmodule.
loop at tline.
concatenate text tline-tdline into text.
endloop.
matnr = itab-matnr.
at end of matnr.
itab1-matnr = matnr.
itab1-text = text.
append itab1.
clear text.
endat.
endloop.
NB change the code as per your requirement
regards
shiba dutta

How to Insert the Text in Selected Text Frame-Reg.

Dear all,
I am using the SnipperRunner - SDK, and create the TextFrame, but I can't insert the Text in the Particular Frame. so please give me the soultions,
(*) Create TextFrame is ok,
(*) Select TextFrame is also ok,
(*) now, my Query ->
How to Insert the Text in the Selected Frame?. (or)
How to Link the Selectable Frame and my Text.? (or)
How come to know the TextFrame is select?.
Please any one can suggest me through the Coding....I will appreciate you...
Thanks & Regards,
T.R.Harihara SudhaN

Hi,
you have to get the TextModel associated with the textframe. Once you got that, ITextModel has an Insert()-method. You could also process kInsertTextCmdBoss - there are quite a few examples around. I believe WriteFishPrice also inserts text into a frame, just as an example. Good luck ...
Bernt

How can I import text produced in Pages into Adobe inDesign?

How can I import text produced in Pages into Adobe inDesign?

Menu > File > Export > Word .doc/x
I doubt it will do graphics and layout, but maybe, depending on your version of Indesign you may hit lucky (but probably not).
Peter

How do i link text boxes between pages in indesign cs5

How do i linbk text boxes between pages in indesign cs5 please

It is indeed may be someone has moved the discussions,
Regarding your issue, Check this link:- http://helpx.adobe.com/indesign/using/threading-text.html
If you could explain what exactly you are trying to do we may help better.

How to insert vietnameese text in a form

Hi all,
How to insert Vietnamese text in a smartform since it is not supported by SAP.

You can insert using standard text So10 call the standard text in your form where every it is required.
Download text/language converter using google search. Convert text to your desired language and place it in SO10.
close the thread once your question is answered.
Regards,
SaiRam

How to display Japanese Text in web page?

Hi,
I am trying to get this i18n stuff right for a few days but don't seem to find all answers.
I am using Sybase databse to store Japanese characters. A perl script inserts the chars in table. Then I use a test JSP program to display the chars.
<%@ page contentType="text/html; charset=UTF-8" %>
<%@ page language="java" %>
<%@ page import="java.io.*" %>
<%@ page import="java.sql.*" %>
<%@ page import="java.util.*" %>
<%@ page import="javax.sql.*" %>
<%@ page import="javax.servlet.*" %>
<%@ page import="javax.servlet.http.*" %>
<%@ page import="javax.naming.InitialContext" %>
<%@ page import="java.text.SimpleDateFormat" %>
<html>
<head><title>testing for utf string</title>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
</head>
<body>
<%
Connection conn = null;
Statement stmt = null;
ResultSet rs = null;
try{
        InitialContext context = new InitialContext();
        DataSource ds = (DataSource) context.lookup(System.getProperty("TESTDS"));
        conn = ds.getConnection();
        stmt = conn.createStatement();
        rs = stmt.executeQuery("select comment from TestTable");
        while(rs.next()){
                out.println("<br>");
                out.println("the comment is : <Textarea Cols=\"90\" Rows=\"5\" Name=\"Comment\">"+rs.getString(1)+"</Textarea>");
                out.println("<br>");
                out.println("the comment is "+rs.getString(1));
}catch(Exception e){
        e.printStackTrace();
}finally{
        try{
        if(rs != null) {rs.close();}
        if(stmt != null) {stmt.close();}
        if(conn != null) {conn.close();}
        }catch(Exception e){}
%>
</body>
</html>But the page does not display correctly. If I change the charset as JIS, then it seems to work. But my web page will be having chars from multiple language and I think utf-8 is the right charset for that.
Any pointers?
Thanks

What JSP/Servlet server are you using and what version?
Try this just for debugging:
Remove the rs.getString(1) from the out.println() call. Just assign the returned value to a local String variable and display the variable using (I hope I'm remembering correctly) this:
<%= myVariable %>
I'm curious whether directly inserting the text into the page is somehow different from sending it via out.println.
Regards,
John O'Conner

How do I remove text boxes from Pages

I have an awful time with Pages on my lap top. I am used to Appleworks 6.2 on my older desktop (PowerMac G4 / OS 10.4.11). If I specify a US letter page I get that in Appleworks, it is then 8.1/2" x 11", without running into pre-existing formats or other similar distractions. I can immediately type a neat business letter.
Not with Pages. On my MacBookAir, with Pages 4.3 and OS 10.8.4, I can type alright, but when I want to print what I typed, only a small part of what I typed shows up in in Print Preview of my typed page. After a bit of backtracking, I notice a blue-lined rectangle on my typed page containing the portion of my typing that appeared in that Print Preview. It is apparently a self-formed "text box", that was not a part of my blank template page and was not inserted by me while or just before I typed.
I did not find any way to delete the edges of that text box. The "delete" option under the pull down edit menu is blanked out. If I click on the "Text box " symbol in the menu bar it does not let me switch off the text box, but instead gives me another text box inside the first one! I suppose this is to allow user to print only a single keyboard stroke of the entire letter. The "Inspector" seems to have no options to set text boxes.
Pages "Help" Menu has nothing of how to delete a text box, or how to prevent it in the first place from screwing up what you have typed in such manner that it becomes unprintable.
Similarly a small rectangular box formed on both the top and the bottom of each page (which could be a space reserved for a header or footer), but again I do not use these on my business letters, and they appear self-formed by Pages, and I would like to know how to prevent them, or delete them.
In other words I like to get a blank page to start with, which will only set up and type what "I, THE USER" enter on my keyboard.
Can anybody tell me how to this with Pages?
(PS. I can do it with even with Thunderbird !)

1. Open a blank Word Processing template (they are listed in the Template Chooser sidebar), you have opened a Layout template that requires Textboxes for you to type into.
2. To select a Textbox hold down the command key and click on its edge or lassoo it, then hit delete.
3. If you don't want Headers or Footers, uncheck them in the Document Inspector
4. Download the Pages09_UserGUide.pdf from under the Help menu and familiarise yourself with Pages' basics. Also look around your Menus and Inspectors which are laid out logically from left to right from broad to details.
I suggest you click inside your textbox first go command a and copy the contents before you delete it and then paste that into a new Word Processing template.
Peter

How to Insert Web Gallery in Web Page?

I created a Web Photo Gallery in Adobe Bridge CS4. I want to INSERT it in a web page using Dreamweaver. The problem is that the Web Gallery is an index.html file and appears to be a web page itself. But I need it to just be part of a web page that contains my background images, texts and links. The Web Gallery is NOT a flash animation.
Thanks,
Ief

With so many questions about this, I decided to create a test gallery using Bridge and I must admit, it's not as easy as one would think to incorporate it into an existing site. Admittedly I didn't spent too much time on this, but I agree, it should be much easier to implement.
Here's a few links dealing with Photo Galleries and Slideshows that may be useful:
Photo album using spry
http://www.adobe.com/devnet/dreamweaver/articles/spry_photo_album.html
Image gallery
http://www.simpleviewer.net/simpleviewer/
LightBox 2
http://www.lokeshdhakar.com/projects/lightbox2/
FLOATBOX:
http://randomous.com/floatbox/demo
Phatfusion lightbox - photos, flash
http://www.phatfusion.net/multibox/
PrettyPhoto:
http://www.no-margin-for-errors.com/projects/prettyPhoto-jquery-lightbox-clone/
Scrolling Images
http://sorgalla.com/jcarousel/
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
http://twitter.com/nadiap

How to insert multilingual text

Problem Statement:
Inserting mutilingual text into a table. English, and other languages with the base script of English is perfectly fine. But what if the script is something like Japanese, Chinese, Korean etc?

You can't have different colors for different pieces of text. See the Swing tutorial on "General Rules for Using Text Components" for and example of how to do this using a JTextPane:
http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html

How do I keep text columns visible?

Hi, When I create text columns and rows in the Area Type Options box they preview but disappear the moment I
click on them or try to put guides on them. How do I keep them visible?
Any suggestions.
Regards'
Ovidivo.

Now I understand you. You are talking about the dividers between the columns, not the text box.
No, you can't select the box by clicking on them, nor can you snap guides to them.
In fact they're only there to show you the maximum width of the columns.
The only way to keep them visible is to have the box selected.
Otherwise, I have always preferred linked single column text boxes in Illie.
It's easier to control text flow that way, but that's only my personal preference.

How to insert long text data in oracle for LONG column type??

Anybody who can tell me what is best way to store long text (more than 8k) in Oralce table.
I am using Long datatype for column but it still doenst let me insert longer strings.
Also I am using ODP.Net.
Anybody with a good suggestion???
Thanks in advance

Hi,
Are you getting an error? If so, what?
This works for me..
Greg
create table longtab(col1 varchar2(10), col2 long );
using System;
using System.Data;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
using System.Text;
public class longwrite
public static void Main()
// make a long string
StringBuilder sb = new StringBuilder();
for (int i=0;i<55000;i++)
sb.Append("a");
sb.Append("Z");
string indata = sb.ToString();
Console.WriteLine("string length is {0}",indata .Length);
// insert into database
OracleConnection con = new OracleConnection("user id=scott;password=tiger;data source=orcl");
con.Open();
OracleCommand cmd = new OracleCommand();
cmd.CommandText = "insert into longtab values(1,:longparam)";
cmd.Connection = con;
OracleParameter longparam = new OracleParameter("longparam",OracleDbType.Long,indata .Length);
longparam.Direction = ParameterDirection.Input;
longparam.Value = indata ;
cmd.Parameters.Add(longparam);
cmd.ExecuteNonQuery();
Console.WriteLine("insert complete");
//now retrieve it
cmd.CommandText = "select rowid,col2 from longtab where col1 = 1";
OracleDataReader reader = cmd.ExecuteReader();
reader.Read();
string outdata = (string)reader.GetOracleString(1);
Console.WriteLine("string length is {0}",outdata.Length);
//Console.WriteLine("string is {0}",outdata);
reader.Close();
con.Close();
con.Close();
}

How do i set up columns in pages

How do I set up 2 columns within a page. That is full page, no column text above the columns and text below the columns?
I have made columns, and have the text above, how do I turn off or set the bottom border of the columns/
Thanks

Matchka007 wrote:
Thank you. Are the start and end locations for columns somewhere I am missing, is it the layout margins section of columns?
The before seems to move start of columns and creates space after, however I am not understanding what these spaces are.
A Layout Break cuts all the way across the page. The content will divide between the columns as equally as possible. If you wish to manipulate the way content is apportioned between the columns in a layout, use Column Breaks.
Jerry

How do I "flow" text from one page to another

I think I have a simple question that I cant seem to figure out. I am creating an electronic Letterhead for my office to use. What I need to be able to do is have a text box that starts on the first page, and "flows" the text to the the following pages as the user types the letter. Does anyone have any idea how to do this? A step by step answer would be very helpful.
Thanks, Aaron

First you'll need to save the form as a dynamic form. Once you've done that, you'll need to click on the field you want to expand and check the Allow Multiple Lines checkbox in the Field tab under Object. Then go into the Layout tab and check Expand to fit under Height.
If this isn't exactly what you're looking for, a quick search using the forum search might help you find what you need.
Regards,
Dave

How to insert independent text column in pages ?

Similar Messages

Maybe you are looking for