How to insert " into a cell in excel
Hi,
I have a z function module to download data into excel file .
Types: begin of t_file,
line(1000) type c,
end of t_file.
I need to create an internal table of above type and send it to z function module to create excel.While creating internal table one of the fields values should be something like "2(starting with ") .During debugging I am able to see " but after download there are some junk characters in that field instead of ".
Please let me know how to send " into excel file
Thanks
Bala Duvvuri
Hi Bala,
I would suggest to go to your code in debugging and chek giving the hwx value for " and dowmload to excel. I faced a similar problem and used this method. But i had to go for other method as my requirement was to download and both upload.
I think hex value for " is 2200.
sample codes for FMs for conversion can be easily find in net.
Please try and reply.
Ben.
Similar Messages
-
How to insert into more than one table at a time also..
hi,
i am a newbee.
how to insert into more than one table at a time
also
how to get a autoincremented value of an id say transactionid for a particular accountid.
pls assume table as
transactionid accountid
101 50
102 30
103 50
104 35
i want 102 for accountid 30 and 103 for accountid 50.
thank u@blushadow,
You can only insert into one table at a time. Take a look here :
Re: insert into 2 tables
@Raja,
I want how to extract the last incremented value not to insert.Also, I don't understand your thread title... which was "how to insert into more than one table at a time also.. "
Insert, extract... ? Can you clarify your job ?
Nicolas. -
How to insert into a table with a nested table which refer to another table
Hello everybody,
As the title of this thread might not be very understandable, I'm going to explain it :
In a context of a library, I have an object table about Book, and an object table about Subscriber.
In the table Subscriber, I have a nested table modeling the Loan made by the subscriber.
And finally, this nested table refers to the Book table.
Here the code concerning the creation of theses tables :
Book :
create or replace type TBook as object
number int,
title varchar2(50)
Loan :
create or replace type TLoan as object
book ref TBook,
loaning_date date
create or replace type NTLoan as table of TLoan;
Subscriber :
create or replace type TSubscriber as object
sub_id int,
name varchar2(25)
loans NTLoan
Now, my problem is how to insert into a table of TSubscriber... I tried this query, without any success...
insert into OSubscriber values
*(1, 'LEVEQUE', NTLoan(*
select TLoan(ref(b), '10/03/85') from OBook b where b.number = 1)
Of course, there is an occurrence of book in the table OBook with the number attribute 1.
Oracle returned me this error :
SQL error : ORA-00936: missing expression
00936. 00000 - "missing expression"
Thank you for your help1) NUMBER is a reserved word - you can't use it as identifier:
SQL> create or replace type TBook as object
2 (
3 number int,
4 title varchar2(50)
5 );
6 /
Warning: Type created with compilation errors.
SQL> show err
Errors for TYPE TBOOK:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
3/1 PLS-00330: invalid use of type name or subtype name2) Subquery must be enclosed in parenthesis:
SQL> create table OSubscriber of TSubscriber
2 nested table loans store as loans
3 /
Table created.
SQL> create table OBook of TBook
2 /
Table created.
SQL> insert
2 into OBook
3 values(
4 1,
5 'No Title'
6 )
7 /
1 row created.
SQL> commit
2 /
Commit complete.
SQL> insert into OSubscriber
2 values(
3 1,
4 'LEVEQUE',
5 NTLoan(
6 (select TLoan(ref(b),DATE '1985-10-03') from OBook b where b.num = 1)
7 )
8 )
9 /
1 row created.
SQL> select *
2 from OSubscriber
3 /
SUB_ID NAME
LOANS(BOOK, LOANING_DATE)
1 LEVEQUE
NTLOAN(TLOAN(000022020863025C8D48614D708DB5CD98524013DC88599E34C3D34E9B9DBA1418E49F1EB2, '03-OCT-85'))
SQL> SY. -
How to insert into a table in database1 from a table in database2?
hi!
how to insert into a table in database1 from a table in
database2?
can anyone help?
Tariq.using the EXEC_SQL package.
see form help for detail.
Regards. -
How to insert into a table from 3 tables?
Hello,
How to insert into a table getting values from 3 different tables?
For example table_A has col_1 to col_10.
I want to insert into table_A,
values: col_1 to col_4 are from table_B,
col_5 is from table_C,
col_6 to col_10 are from table_D.
Thanks!Normally, you'd do this by joining B, C, and D together. In the simplest case, something like
INSERT INTO A( col1, ... col10 )
SELECT B.col1, ..., B.col4,
C.col5,
D.col6, ..., D.col10
FROM B,
C,
D,
WHERE B.someKeyColumn = C.someKeyColumn
AND C.anotherKeyColumn = D.anotherKeyColumnYou'd have to know how the data in B, C, and D relate to fill in the WHERE clause. This basically tells Oracle how to match the data in a particular row in B with the data in a particular row in C with the data in a particular row in D.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
How to download data into one cell of excel in different lines
Hi All,
My Report downloads data from R/3 to excel. Now one particular field contains multiple lines, which i needs to download into different lines into that particular cell(of excel). how can i do this.
I found one method for this and that is cl_abap_char_utilities=>newline.But this is in abap version 6.0.
But i am working in version 4.6c. do we have any method or anything that meets my requirement in 4.6c.
Please let me know.
Thanx in Advance
Subhani.why do you split them to the internal table ,then download it?
Is you special field long text?
If is ,you can use FM READ_TEXT to put it into an internal table ,then download it. -
How can i get the images from a picture ring into a cell in Excel?
Hi
I need to get the chosen image from a picture ring into a cell in a Excel worksheet. If i use an invoke node i only get to write a picture from file. How can i get the picture directly from the picture ring into Excel?
KennethNo, there is no simple way of doing it directly. You need some clipboard manipulation which means you need to write some codes in excel as well. Importing the image through a file is much easier.
-Joe -
How to Update a particular cell in Excel with its specific cell Name?
{color:#000080}Hi,
I have connected my Java program to Excel using JDBC ODBC connection and also I am able to read/write data to Excel currently.
In my write code, I have updated the data in particular Excel cells by using conditions in "where" clause.
Example:
String $mcode="hello";
double da1 = Double.parseDouble(txtda1.getText());
st.executeUpdate("insert into [Sheet4$] values (' " +$mcode+ " ')");
st.executeUpdate("Update [Sheet4$] set Lot1="+da1+" where Lot1='"+$mcode+"'");
But I would like to refer to the individual excel cells by their cell name instead of like the above said one.
In whatever I saw, third party tools were used to refer to the excels cells by their name. But I have to refer to in an ordinary way.
It would be great if somebody could help me in referring to Excel cells by their name.
Thanks in advance!{color}I don't think it is possible to refer to cell in excel using jdbc, since jdbc is intended to communicate with mostly database in generic way. So you have to use queryStrings to update or retive cell info.
The only way to access them by cell name is possibly by using some third party tools. -
How to INSERT into table using CORRELATED subquery
I have 3 tables:
1.TEMP_PHONE(person_id, phonenumber, phone_type) - this holds all phone numbers relating to a person(just a temporary holding area)
2.PHONE_CONNECT(PERSON_ID, PHONE_ID) this table shows all the phone numbers relating to an individual. Phone_id is a unique number to identify a phonenumber and type(cell, work, home) - so in this table a person can have multiple phone ids)
3.MASTER_PHONE(PHONE_ID, PHONENUMBER, PHONE_TYPE) this is a master phone table. each combination of phone number and type has a unique identifier-phone_id.
What i need to figure out is how to populate PHONE_CONNECT with the information from TEMP_PHONE IF PERSON_ID already exists but phone_id is different. In other words, if the person gets a new phone number, i need to insert a new row into phone_connect.
Before that step is started, the master_phone is populated first with a new phone_id associated to the phonenumber/type
any help would be much appreciated. Thanks in advance.
So far, this is what i have come up with, but not sure if it makes sense:
insert into phone_connect(person_id)
select a.person_id
from temp_phone a
where
person_id = (select b.person_id from phone_connect b, master_phone c
where
a.person_id=b.person_id
and b.phone_id <> c.phone_id
and c.phonenumber||c.phone_type=a.phonenumber||a.phone_type);
update phone_connect c
set phone_id=(
select b.phone_id
from temp_phone a, master_phone b
where a.person_id = c.person_id
and a.phonenumber||a.phone_type = b.phonenumber||b.phone_type)
where phone_id is null;It does. You are right. But that's what i need help with. I don't think my code is correct. After the insert, the code is actually updating the same exact record I just inserted. I'm sure this all can be done with one insert. I just really don't know how to show that in my code.
I need to insert a new record into phone_connect with person_id and phone_id. phone_id is already populated in master_phone. I guess my problem is how to go about creating the joins to all three tables to make sure im inserting the data correctly, or not inserting data that already exists. -
How to insert into two differents tables at the same time
Hi
I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
and I want to insert into two differents tables at the same time using one view.
How can I do that ?
TIA
EdgarOracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
2. Create an INSTEAD OF trigger on the view.
3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
ELSE
IF :NEW.deptname IS NOT NULL THEN
UPDATE dept SET deptname = :NEW.deptname
WHERE deptno = :NEW.deptno;
END IF;
IF :NEW.empname IS NOT NULL THEN
UPDATE emp SET empname = :NEW.empname
WHERE deptno = :NEW.deptno;
Try something along those lines.
null -
How to insert into 2 tables from the same page (with one button link)
Hi,
I have the following 2 tables....
Employees
emp_id number not null
name varchar2(30) not null
email varchar2(50)
hire_date date
dept_id number
PK = emp_id
FK = dept_id
Notes
note_id number not null
added_on date not null
added_by varchar2(30) not null
note varchar2(4000)
emp_id number not null
PK = note_id
FK = emp_id
I want to do an insert into both tables via the application and also via the same page (with one button link). I have made a form to add an employee with an add button - adding an employee is no problem.
Now, on the same page, I have added a html text area in another region, where the user can write a note. But how do I get the note to insert into the Notes table when the user clicks the add button?
In other words, when the user clicks 'add', the employee information should be inserted into the Employees table and the note should be inserted into the Notes table.
How do I go about doing this?
Thanks.Hi,
These are my After Submit Processes...
After Submit
30 Process Row of NOTES Automatic Row Processing (DML) Unconditional
30 Process Row of EMPLOYEES Automatic Row Processing (DML) Unconditional
40 reset page Clear Cache for all Items on Pages (PageID,PageID,PageID) Unconditional
40 reset page Clear Cache for all Items on Pages (PageID,PageID,PageID) Unconditional
40 reset page Clear Cache for all Items on Pages (PageID,PageID,PageID) Unconditional
40 reset page Clear Cache for all Items on Pages (PageID,PageID,PageID) Unconditional
50 Insert into Tables PL/SQL anonymous block Conditional
My pl/sql code is the same as posted earlier.
Upon inserting data into the forms and clicking the add button, I get this error...
ORA-06550: line 1, column 102: PL/SQL: ORA-00904: "NOTES": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table EMPLOYEES.
Is there something wrong with the pl/sql code or is it something else? -
How to insert into table from an Datatable ?
Hi Friend,
I have a datatable that is created at some point in my SSIS as an object.
I need to insert the data into a sql table, how should I do that ?
I have this:
Dim oleDA As New OleDbDataAdapter
Dim dt As New DataTable
Dim col As DataColumn
Dim row As DataRow
Dim sMsg As String
oleDA.Fill(dt, Dts.Variables("history").Value
and want to insert into a table in a SQL DB
Dim sqlCon As New SqlClient.SqlConnection("server=Myserver\SQL2008R2;database=MyDB;Integrated Security=SSPI")
Dim sqlreader As SqlClient.SqlDataReader
sqlCon.Open()
Thanks in advance,
Pat
Patrick AlexanderConvert it to a ADO .Net recordset and store it in a object variable in SSIS.
Then you can use it to populate the table using foreach loop with ado enumerator
http://www.codeproject.com/Articles/10503/Simplest-code-to-convert-an-ADO-NET-DataTable-to-a
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
How to change width of cell in Excel using LabVIEW 5.1
Enable program to change width of cell in Excel 97 file using LabVIEW 5.1.
You must have an automation reference to the workbook or the worksheet. Using Application Control pallette find the Property and Invode nodes and wire up the following, cascading the output of each node into the reference of the next:
Start with worksheet reference
Invoke Range
Property Entirecolumn
Property Columnwidth
Change Columnwidth to write and wire in the numeric value in pixels.
Michael
[email protected]
http://www.abcdefirm.com
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector -
How to insert into table, of table description of table
Dear All,
I need to take the table description of the table and i need to insert that description in to a new table column , please help me to how to write the query for these.
many thanks in advance
Sreenivasulu Puser627163 wrote:
Dear All,
I need to take the table description of the table and i need to insert that description in to a new table column , please help me to how to write the >query for these.Why insert into a new column into the same table ? That would be madness. :) (kidding)
You can explore with this :
[oracle@g5 ~]$ sqlplus scott/tiger
SQL*Plus: Release 11.1.0.6.0 - Production on Tue Jun 2 09:23:10 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> create table dtable (tablename varchar2(20),col_name varchar2(20),Not_null varchar2(1), datatype varchar2(20) );
Table created.
SQL> desc dtable
Name Null? Type
TABLENAME VARCHAR2(20)
COL_NAME VARCHAR2(20)
NOT_NULL VARCHAR2(1)
DATATYPE VARCHAR2(20)
SQL> set wrap off
SQL> SELECT column_name "Name", nullable "Null?",
CONCAT (CONCAT (CONCAT (data_type, '('), data_length), ')') "Type"
FROM user_tab_columns
WHERE table_name = 'EMP';
Name N Type
EMPNO N NUMBER(22)
ENAME Y VARCHAR2(10)
JOB Y VARCHAR2(9)
MGR Y NUMBER(22)
HIREDATE Y DATE(7)
SAL Y NUMBER(22)
COMM Y NUMBER(22)
DEPTNO Y NUMBER(22)
8 rows selected.
SQL> INSERT INTO dtable
SELECT 'emp', column_name, nullable,
CONCAT (CONCAT (CONCAT (data_type, '('), data_length), ')') "Type"
FROM user_tab_columns
WHERE table_name = 'EMP';
8 rows created.
SQL> commit;
Commit complete.
SQL> select * from dtable;
TABLENAME COL_NAME N DATATYPE
emp EMPNO N NUMBER(22)
emp ENAME Y VARCHAR2(10)
emp JOB Y VARCHAR2(9)
emp MGR Y NUMBER(22)
emp HIREDATE Y DATE(7)
emp SAL Y NUMBER(22)
emp COMM Y NUMBER(22)
emp DEPTNO Y NUMBER(22)
8 rows selected.
many thanks in advancecheers
Sreenivasulu P -
How to INSERT INTO a specific row?
I have a form with a calendar at the top, below it is a list of items each with a check box.
Here is a wonderful visual of it -
Calendar
Checkbox | Col | Col | Col
Checkbox | Col | Col | Col
Checkbox | Col | Col | Col
I want it so you select the date and it gets passed into the database in the same row as the one (definitely one, multiple is better) that has been checked by the user.
I was trying an INSERT INTO with a WHERE statement but apparently you can't do that. So if I can use a WHERE with INSERT INTO, how can I identify which row to insert the info?
Currently it is passing the dates but it creates a new row.
I didn't think posting the code is neccisary for this question but if anyone wants to see it let me know and I will post it.
THANKS!Ah, ok, I will try UPDATE.
Right now my form looks like this...
<cfform name="requestform" role="form"action="resources/requestform.cfm" method="post" width="375" height="350" >
<label for="startdate">Start Date:</label>
<label for="enddate">Finish Date:</label>
<cfcalendar name="selectedDate"
selectedDate="#Form.selectdate#"
startRange="#Form.startdate#"
endRange="#Form.enddate#"
mask="mmm dd, yyyy"
dayNames="SU,MO,TU,WE,TH,FR,SA"
firstDayOfWeek="1"
monthNames="JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC"
style="rollOverColor:##FF0000"
width="200" height="150">
<cfinput type="dateField" name="startdate" label="Start Date" width="100" value="#Form.startdate#">
<cfinput type="dateField" name="enddate" label="End Date" width="100" value="#Form.enddate#">
</div>
<cfinclude
template = "resources/query.cfm">
<span class="label label-default">Equipment List</span>
<table class="table table-bordered table-striped">
<tr>
<td><b>Select</b></td>
<td><b>Name</b></td>
<td><b>Description</b></td>
<td><b>Status</b></td>
</tr>
<cfloop query = "equiplist">
<cfoutput>
<tr>
<td>
<cfinput name="status" type="checkbox" value="#serial#">Select:</cfinput>
<cfinput name="serial"type="text"style="display:none" value="#serial#">
</td>
<td>#name#</td>
<td>#descrip#</td>
<td>#status#</td>
</tr>
</cfoutput>
</cfloop>
</table>
<cfinput class="btn btn-default" type="Submit" value="Submit" name="addsubmit"></cfinput>
</cfform>
And the action page looks like this...
<cfquery
name = "requestform"
dataSource = "db_cie">
UPDATE equip
SET STATUS="Out",
WHERE serial='#status#'
</cfquery>
<cflocation
url = "../request.cfm">
But I am getting an error "invalid.user.table.column, table.column, or table specification. But the error message shows the SQL output and it looks correct...UPDATE equip SET STATUS="Out" WHERE serial="325255"... it IS getting the serial number variable passed from the form. ...No update though. Is my action form written wrong?
Maybe you are looking for
-
How to make vertical flip of video webcam.
Hi all. I am using logitech webcam, i can show video and take piture well. Now i want to make vertical flip of video. They can do it ? If you have any experience, please help me. Thanks. Diego
-
Driver to communicate between LabVIEW and Omron CJ1G PLC
I am trying to communicate between my Omron PLC (Model CJ1G) and LabVIEW. I want to be able to read specific registers and be able to display and save the data in LabVIEW. I have the "Idustrial Automation Servers for OPC" CD but my PLC model no. doe
-
If you go to the affected site and try to search (upper right hand corner of site) you will have "Suggested searches" popping up. However, with Firefox 4 and newer you are not able to select any of the possibilities. This worked fine with earlier ver
-
Help !!!! Adobe Premiere Elements v.2.0 needed !!!
I lost the Adobe Premiere Elements version 2.0 which was bundled on the CD Rom of my former Nokia N93. Would you please guide me where is the Link that I may be redownloaded the relevant Adobe Premiere Elements v.2.0 (the Adobe Premiere Elements vers
-
Spotify is very slow at the office
Hi,Since a week Spotify is being very slow only at the office. I tested with the Mac Application and with the Web Player. Even the communities are very slow. Actually everything with the Spotify domain is slow. If I connect my computer over the 3G of