How to INSERT INTO Shema1.Table (F1,F2...) SELECT F1,F2 FROM Shema2.Table

I am trying to implement a stored procedure witch should copy date from shema1.table into shema2.table. Tables in both shemas are identical! I need an elegant solution which is implemented as a store procedure or package. Can someone please help me!? Thanx!

Instead of PUBLIC.OAP_WORK_NARUDZBE
Try OAP_WORK_NARUDZBE.
And post the full error that you get.
You can test it with SELECT * FROM OAP_WORK_NARUDZBE from your session, and also from your procedure. There is probably a problem with underlying grants, not with the synonym itself.
After rereading the original requirement, I don't understand why we are talking about synonyms anyway.
Make sure you can select from the table in Schema2. To be aber to do this INSIDE a stored procedure you need to GRANT the right DIRECTLY to the user. That means:
Schemauser1 (OAP_WORK) must do: GRANT SELECT ON narudzbe TO Schemauser2Do not grant it to a role.
Schemauser2 (OAP_DATA) can then INSERT INTO narudzbe (...) SELECT ... FROM Schemauser1.narudzbe inside the procedure.
Message was edited by:
Sven Weller

Similar Messages

How to insert into a table with a nested table which refer to another table

Hello everybody,
As the title of this thread might not be very understandable, I'm going to explain it :
In a context of a library, I have an object table about Book, and an object table about Subscriber.
In the table Subscriber, I have a nested table modeling the Loan made by the subscriber.
And finally, this nested table refers to the Book table.
Here the code concerning the creation of theses tables :
Book :
create or replace type TBook as object
number int,
title varchar2(50)
Loan :
create or replace type TLoan as object
book ref TBook,
loaning_date date
create or replace type NTLoan as table of TLoan;
Subscriber :
create or replace type TSubscriber as object
sub_id int,
name varchar2(25)
loans NTLoan
Now, my problem is how to insert into a table of TSubscriber... I tried this query, without any success...
insert into OSubscriber values
*(1, 'LEVEQUE', NTLoan(*
select TLoan(ref(b), '10/03/85') from OBook b where b.number = 1)
Of course, there is an occurrence of book in the table OBook with the number attribute 1.
Oracle returned me this error :
SQL error : ORA-00936: missing expression
00936. 00000 - "missing expression"
Thank you for your help

1) NUMBER is a reserved word - you can't use it as identifier:
SQL> create or replace type TBook as object
2 (
3 number int,
4 title varchar2(50)
5 );
6 /
Warning: Type created with compilation errors.
SQL> show err
Errors for TYPE TBOOK:
LINE/COL ERROR
0/0      PL/SQL: Compilation unit analysis terminated
3/1      PLS-00330: invalid use of type name or subtype name2) Subquery must be enclosed in parenthesis:
SQL> create table OSubscriber of TSubscriber
2 nested table loans store as loans
3 /
Table created.
SQL> create table OBook of TBook
2 /
Table created.
SQL> insert
2    into OBook
3    values(
4           1,
5           'No Title'
6          )
7 /
1 row created.
SQL> commit
2 /
Commit complete.
SQL> insert into OSubscriber
2    values(
3           1,
4           'LEVEQUE',
5           NTLoan(
6                  (select TLoan(ref(b),DATE '1985-10-03') from OBook b where b.num = 1)
7                 )
8          )
9 /
1 row created.
SQL> select *
2    from OSubscriber
3 /
    SUB_ID NAME
LOANS(BOOK, LOANING_DATE)
         1 LEVEQUE
NTLOAN(TLOAN(000022020863025C8D48614D708DB5CD98524013DC88599E34C3D34E9B9DBA1418E49F1EB2, '03-OCT-85'))
SQL> SY.

How to insert into a table in database1 from a table in database2?

hi!
how to insert into a table in database1 from a table in
database2?
can anyone help?
Tariq.

using the EXEC_SQL package.
see form help for detail.
Regards.

How to insert into a table from 3 tables?

Hello,
How to insert into a table getting values from 3 different tables?
For example table_A has col_1 to col_10.
I want to insert into table_A,
values: col_1 to col_4 are from table_B,
col_5 is from table_C,
col_6 to col_10 are from table_D.
Thanks!

Normally, you'd do this by joining B, C, and D together. In the simplest case, something like
INSERT INTO A( col1, ... col10 )
SELECT B.col1, ..., B.col4,
         C.col5,
         D.col6, ..., D.col10
    FROM B,
         C,
         D,
   WHERE B.someKeyColumn = C.someKeyColumn
     AND C.anotherKeyColumn = D.anotherKeyColumnYou'd have to know how the data in B, C, and D relate to fill in the WHERE clause. This basically tells Oracle how to match the data in a particular row in B with the data in a particular row in C with the data in a particular row in D.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to insert into 2 tables from the same page (with one button link)

Hi,
I have the following 2 tables....
Employees
emp_id number not null
name varchar2(30) not null
email varchar2(50)
hire_date date
dept_id number
PK = emp_id
FK = dept_id
Notes
note_id number not null
added_on date not null
added_by varchar2(30) not null
note varchar2(4000)
emp_id number not null
PK = note_id
FK = emp_id
I want to do an insert into both tables via the application and also via the same page (with one button link). I have made a form to add an employee with an add button - adding an employee is no problem.
Now, on the same page, I have added a html text area in another region, where the user can write a note. But how do I get the note to insert into the Notes table when the user clicks the add button?
In other words, when the user clicks 'add', the employee information should be inserted into the Employees table and the note should be inserted into the Notes table.
How do I go about doing this?
Thanks.

Hi,
These are my After Submit Processes...
After Submit
30     Process Row of NOTES     Automatic Row Processing (DML)     Unconditional
30     Process Row of EMPLOYEES     Automatic Row Processing (DML)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
50     Insert into Tables     PL/SQL anonymous block     Conditional
My pl/sql code is the same as posted earlier.
Upon inserting data into the forms and clicking the add button, I get this error...
ORA-06550: line 1, column 102: PL/SQL: ORA-00904: "NOTES": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
     Error      Unable to process row of table EMPLOYEES.
Is there something wrong with the pl/sql code or is it something else?

How to insert into a table using a procedure in a trigger

I have following trigger and based on the some condition, it should inser a row in to a table using the procedure:
CREATE OR REPLACE TRIGGER RSSC.RR_SERV_ADD_ON_REQ_bu before update on RSSC.RR_SERV_ADD_ON_REQ
for each row
DECLARE
lr_appr_trans_hdr APPR_TRANS_HDR%ROWTYPE;
-- Inserting a row into APPR_TRANS_HDR table
          lr_appr_trans_hdr.apth_ref_system := 'RSAO';
          lr_appr_trans_hdr.apth_xref_col_name := 'RSAO_ADD_ON_REQ_NUM';
          lr_appr_trans_hdr.apth_xref_id := :NEW.RSAO_ADD_ON_REQ_NUM;
          lr_appr_trans_hdr.apth_trans_srce := 'I';
          lr_appr_trans_hdr.apth_balance_amt := :NEW.RSAO_TOT_AMT;
          lr_appr_trans_hdr.apth_is_finance_adj := 'N';
          SPI_APPR_TRANS_HDR (
          lr_appr_trans_hdr.apth_id
          ,lr_appr_trans_hdr.apth_create_dt
               ,lr_appr_trans_hdr.apth_create_user_id
               ,lr_appr_trans_hdr.apth_update_dt
               ,lr_appr_trans_hdr.apth_update_user_id
          ,lr_appr_trans_hdr.apth_ref_system
               ,lr_appr_trans_hdr.apth_xref_col_name
               ,lr_appr_trans_hdr.apth_xref_id
               ,lr_appr_trans_hdr.apth_trans_srce
               ,lr_appr_trans_hdr.apth_udc_name_cd
               ,lr_appr_trans_hdr.apth_udc_acct_num
               ,lr_appr_trans_hdr.apth_level1_apprvl_stat
               ,lr_appr_trans_hdr.apth_level1_apprvl_dt
               ,lr_appr_trans_hdr.apth_level1_apprvr_id
               ,lr_appr_trans_hdr.apth_level2_apprvl_stat
               ,lr_appr_trans_hdr.apth_level2_apprvl_dt
               ,lr_appr_trans_hdr.apth_level2_apprvr_id
               ,lr_appr_trans_hdr.apth_received_dt
               ,lr_appr_trans_hdr.apth_balance_amt
               ,lr_appr_trans_hdr.apth_cust_name
               ,lr_appr_trans_hdr.apth_sent_dt
               ,lr_appr_trans_hdr.apth_wbs_element
               ,lr_appr_trans_hdr.apth_gl_acct_num
               ,lr_appr_trans_hdr.apth_is_finance_adj );
When I use the above, it is saying wrong number of argument or type.
When I use the following instead, I am getting :NEW.APTH_ID must be declared.
SPI_APPR_TRANS_HDR('APPR_TRANS_HDR',to_char(:NEW.APTH_ID),'APTH_ID',:OLD.APTH_ID,:NEW.APTH_ID);
How can use the procedure in a trigger.
Following is the table structure:
Column Name     Data Type     Column Comments
APTH_ID     NUMBER(16) Computed unique identified per large table standards (yyyymmddnnnnnnnn)
APTH_CREATE_DT     DATE     sysdate
APTH_CREATE_USER_ID VARCHAR2(65)     ‘conv’
APTH_UPDATE_DT     DATE     sysdate
APTH_UPDATE_USER_ID     VARCHAR2(65)     ‘conv’
APTH_REF_SYSTEM     VARCHAR2(4)     ‘RSAO’
CPA_PREM_NUM     NUMBER(13,0)     NULL
RSR_REQ_NUM     NUMBER(16)     NULL
RSAO_ADD_ON_REQ_NUM     NUMBER(16)     rsao_add_on_req_num
APTH_TRANS_SRCE     VARCHAR2(2)     ‘I’
APTH_LDC_NAME_CD     VARCHAR2(4)     NULL
APTH_LDC_ACCT_NUM     VARCHAR2(25)     NULL
APTH_LEVEL1_APPROVAL_STAT     VARCHAR2(1)     NULL
APTH_LEVEL1_APPROVAL_DT     DATE     NULL.
APTH_LEVEL1_APPROVAL_ID     VARCHAR2(30)     NULL
APTH_LEVEL2_APPROVAL_STAT     VARCHAR2(1)     NULL
APTH_LEVEL2_APPROVAL_DT     DATE     NULL.
APTH_LEVEL2_APPROVAL_ID     VARCHAR2(30)     NULL
APTH_RECEIVED_DT     DATE     NULL
APTH_BALANCE_AMT     NUMBER(11,2) RR_SERV_ADD_ON_REQ.rsao_tot_amt – amount previously extracted to sap
APTH_CUST_NAME     VARCHAR2(65)     NULL
APTH_SENT_DT     DATE     NULL
APTH_WBS_ELEMENT     VARCHAR2(25)     NULL
APTH_GL_ACCT_NUM     VARCHAR2(15) NULL
APTH_IS_FINANC_ADJ     VARCHAR2(1)     ‘N’
Edited by: user652807 on Sep 3, 2008 4:51 PM

It appears you're missing the format mask in the TO_CHAR, ...
TO_CHAR(:new.apth,'YYYYMMHR24MISS')
The full code would help a bit more.

How to insert into two tables using a Single ADF creation form?

Hi,
I need to make a ADF Creation Form that will insert the data at same time in two tables... Like i have two tables Track (Track_id,Track_Name)
and Module ( Module_id, Track_id, Module_name, Module_Short_name) and i have to insert the data in both the tables using Same Creation Form.
can anybody help me out and gave me the solution,how to do that?
Thanks

if you want to insert different data into two different tables then you can drag the two data objects into creation form..
If you want to duplicate the data inserted in the one table to another then you can follow two approach
1. Drag and drop one table, When Save button is invoked then insert data into another table using callable statement.
or
2. Create on-insert trigger in Table1 where you can insert data into table2.
--Prasanna

How to insert into xml table from relational table

I wrote a sqlstaement that selects value from the relational tables. Now I want to replace root node "<event_start01>" with following value to the above selected xml string. My select returns root node and all nodes and elements of the root node.
I tried holding above sellected value into varchar2 variable but I get ora-00600 error. If I hold above selected values into xmltype variable then I am not able to replace root node with the following value.
I want to rplace rootnode with the following string.
INSERT INTO FRMD_EVENT_START01(xml_event_start) VALUES
(XMLTYPE('<event_start01
xmlns="event_start01.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="event_start01.xsd
event_start01.xsd">

Normally, you'd do this by joining B, C, and D together. In the simplest case, something like
INSERT INTO A( col1, ... col10 )
SELECT B.col1, ..., B.col4,
         C.col5,
         D.col6, ..., D.col10
    FROM B,
         C,
         D,
   WHERE B.someKeyColumn = C.someKeyColumn
     AND C.anotherKeyColumn = D.anotherKeyColumnYou'd have to know how the data in B, C, and D relate to fill in the WHERE clause. This basically tells Oracle how to match the data in a particular row in B with the data in a particular row in C with the data in a particular row in D.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to insert into internal table

I have 3 internal, for example, one of header table, one of item table, one of result table.
How can i insert header and item into result table.
Like.
Insert header-f1 header-f2 item-f1 item-f2 item-f3 into result
Thanks.

loop at ititem.
move-corresponding ititem to itresult.
read table itheader with key f1 = ititem-f1.
if sy-subrc = 0.
move-corresponding itheader to itresult.
endif.
append itresult.
endloop.
here all the tables are with header line if your table is without header line you have to use explicit work area.
regards
shiba dutta

How to insert into mysql the creation time and modification time from java?

first how?
Second what is better from create the date from java or do it from mysql?
thanks in advace
Pedro

One way is to use the GetDate function in mysql. This will set the date as you insert data. insert into table(date) values(getdate())
Anytime you modifiy the table just call the function again and update its fields.
Dont know which is beter to do. In java or on the database side.

Using ADF BC how to insert into two table ?

I'm working with ADF BC and JSP.
In my project, I have :
1- each COURSE have one SYLLABUS .
2- each SYLLABUS have one or many WEEK.
3- showCourses.jsp to show all courses and a button "create a new course" .
4- createCourse.jsp to create or update the course.
In "createCourse.jsp" , I want to fill all the data of COURSE , SYLLABUS and WEEK using the BC.
may you kindly help me !

No response ?!
I have put data control of the two tables : COURSE and SYLLABUS on createCourse.jsp as Input Form drag and drop. Because there are two forms , I have remove one of them and keep one with the Commit button.
Whene I Commit the form the course record that is created early in showCourse.jsp getting updat well .
The problem is :
there is no record in Sysllabus table to be update . So , How to create a record in Syllabus just when I create a record in Course ? And how to update it in the same form with course ?
my project is stoping here !
Are u hear me !

How to insert '&' into a table?

& is the sign of substitution varibles in oracle, if I need to insert a string contains '&' character, how can I do it?
Thanks

& is the sign of substitution varibles in oracleIt is the DEFAULT symbol for substitution variables in SQL*Plus. Other tools such as TOAD and PL/SQL Developer tend to use it for SQL*Plus compatibility, but it is generally configurable. As well as disabling substitution, you can set it to something else:
SQL> set define #
SQL> SELECT 'Mills & Boon' AS name FROM dual;
NAME
Mills & Boon
1 row selected.
SQL> SELECT 'Mills # Boon' AS name FROM dual
Enter value for boon: & Boon
NAME
Mills & Boon
1 row selected.

How can I insert into a table other than the default table in a form

Hi,
I want to insert into a table with some fields value of a form of another table. I have written insert code On successful submission of that form, but after submit it gives the following error
An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)
My code is like this
declare
l_trn_id number;
l_provider_role varchar2(3);
l_provider_id varchar2(10);
begin
l_trn_id := p_session.get_value_as_number(p_block_name=>'DEFAULT',p_attribute_name=>'A_TRANSACTION_ID');
l_provider_id := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',p_attribute_name=>'A_PROVIDER1');
l_PROVIDER_ROLE := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',p_attribute_name=>'A_PROVIDER_ROLE1');
if (l_provider_role is not null) and (l_provider_id is not null) then
insert into service_provider_trans_records(service_provider_id,transaction_id,role_type_id)
values(l_provider_id, l_trn_id, l_provider_role);
commit;
end if;
end;
Where 'PROVIDER1' and 'PROVIDER_ROLE1' are not table fields.
How can do that or why this error comes ? Any idea?
Thanks
Sumita

Hi,
When do you get this error? Is it while running or while creating the form.
Here is a sample code which inserts a non-database column dummy into a table called dummy. This is done in successful procedure.
declare
l_dummy varchar2(1000);
begin
l_dummy := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',
p_attribute_name=>'A_DUMMY');
insert into sjayaram903_1g.dummy values(l_dummy);commit;
end;
Please check in your case if the size of the local variable is enough to hold the values being returned.
Thanks,
Sharmila

How can I get a count at the same time I am inserting into another table

I have a requirement where I have to find out the count(number of records inserted into another table) at the same time I insert into the table:
Like
I am copying records from table B to A, while doing this I have to find out how many records I've inserted since I need this count in subsequent steps
INSERT INTO A
SELECT * FROM B
how can I store the count into any variable while doing above statement
Please advice

No, Warren that doesn't work!
SQL> set serveroutput on
SQL> declare
2     vCtr number := 0;
3 begin
4     insert into emp2
5     select * from emp;
6
7     select count(*)
8       into vCtr
9       from emp2;
10
11     dbms_output.put_line('rows created '||to_char(vCtr));
12 end;
13 /
rows created 15
PL/SQL procedure successfully completed.
SQL> declare
2     vCtr number := 0;
3 begin
4     insert into emp2
5     select * from emp;
6
7     select count(*)
8       into vCtr
9       from emp2;
10
11     dbms_output.put_line('rows created '||to_char(vCtr));
12 end;
13 /
rows created 30
PL/SQL procedure successfully completed.
SQL>

How to insert into more than one table at a time also..

hi,
i am a newbee.
how to insert into more than one table at a time
also
how to get a autoincremented value of an id say transactionid for a particular accountid.
pls assume table as
transactionid accountid
101 50
102 30
103 50
104 35
i want 102 for accountid 30 and 103 for accountid 50.
thank u

@blushadow,
You can only insert into one table at a time. Take a look here :
Re: insert into 2 tables
@Raja,
I want how to extract the last incremented value not to insert.Also, I don't understand your thread title... which was "how to insert into more than one table at a time also.. "
Insert, extract... ? Can you clarify your job ?
Nicolas.

How to INSERT INTO Shema1.Table (F1,F2...) SELECT F1,F2 FROM Shema2.Table

Similar Messages

Maybe you are looking for