How to instal both win 7 & 8 in a same laptop?

in my laptop i already having windows 7 but now i want win 8 too in my laptop. any one tell me how to make that selection of in start up.

Hi,
Please use the following tutorials:
http://www.7tutorials.com/how-dual-boot-windows-8-windows-7-windows-vista-or-windows-xp
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Install both Win & Mac versions from same serial

I have Premiere Elements 9 which with separate installation disks for Windows and Mac version.
The windows version is already installed on my Windows 7 laptop and resgistered at Adobe.
Can I now install the Mac version on my Macbook too? It may sound a silly question since the serial number of both installations will be same.
I am not sure if it can be done or even if done once...one of them will not get automatically canceled by Adobe (since it keeps connecting the server).
Has anyone else thought or experienced this?
Thanks!

As Steve points out, you can install on two separate computers. One consideration is that by the EULA, you cannot have both instances running at the same time.
Good luck,
Hunt

How to install HP Deskjet 990cxi on my new laptop running Windows 7 Home Premium on an AMD 64

I have spent two days trying to install my excellent HP Deskjet 990cxi on my new laptop running Win7 Home Premium on an AMD 64-bit processor. I want to do two things:
to set the printer up to run direct from a USB port on my laptop. Having done this, I then want
to set the printer up on BT Home Hub Type 2A, connected through the hub's USB, as a network computer.
So far under windows, this has proved a huge problem. It seems that the printer settings file is in 32-bit, but in the attempt to install the printer through the Windows "add printer" in Devices and Printers, and after a Windows update on the program to find Deskjet 990c, I run into a brick wall with the printer failing to install. I get the following message: "Printer driver was not installed. Access is denied ". Yet I am loading the printer drivers as Administrator.
By contrast, I also run Ubuntu 11.04 linux on this computer under Windows.
Ubuntu loaded the 990cxi drivers in an instant when it was connected via USB to the laptop; and more importantly,
Ubuntu set the printer us as a network printer running off the BT Home Hub type 2A and it worked perfectly. I even tested it by sending a graphics file from my garden to the printer indoors and the quality was perfect.
So the observation is this: If Ubuntu can load both printer settings on the same laptop, why is Windows 7 such a trial? Can HP do anything about this?
Terence Keeler B.Sc (Hons) LLM
Freshwater, Isle of Wight, UK

JJMack <[email protected]> wrote:
=============
JJMack created the discussion
"when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas"
To view the discussion, visit: https://forums.adobe.com/message/7092876#7092876

How to install both solution manager and ECC Development on same server

Hi All,
Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
Pls let me know.
Regards,
Karthik

Hi Karthik,
I try to answer you message, my answer may not be sufficient for you.
Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
Verify sizing of both systems.
SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
Best regards,
Ruediger Stoecker

How to install both solution manager and ECC Development

Hi All,
Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
Pls let me know.
Regards,
Karthik

Hi Karthik,
I try to answer you message, my answer may not be sufficient for you.
Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
Verify sizing of both systems.
SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
Best regards,
Ruediger Stoecker

How to install oracle 11g and 10g on same linux server.

how can i install oracle 10g and 11g on same linux server ????
10g database is already installed , i want to installed 11g on the same machine. How can i do this???

Hi;
how can i install oracle 10g and 11g on same linux server ????
10g database is already installed , i want to installed 11g on the same machine. How can i do this???You may go wiht different mount point like to create /oracle11g and /oracle10g and you can choose related path for your installation.
Please read:
Managing multiple oracle home
http://docs.oracle.com/cd/B12037_01/em.101/b12140/3_oui_oracle_homes.htm#i1005615
http://docs.oracle.com/cd/B12037_01/em.101/b12140/3_oui_oracle_homes.htm
Regard
Helios

How to install iFS and iAS on the same machine?

I have successfully installed iFS on a Windows NT 4 machine. Now, I would like to install iAS Enterprise Edition on the same machine. The installation guide for iAS says that I should first deinstall all products from the default ORACLE_HOME. I have not found a clue as to what to do if I want to keep the software already installed.
Would it work if I tried (after installing iAS) re-install iFS using different ORACLE_HOME directory?
Is there a white paper or any other document that would clear up the issues involved in installing Oracle products in ORACLE_HOME?
Thanks a lot,
Marek

You can install IAS on the same machine that Oracle and IFS are on. Install IAS into a new Oracle Home (i.e. D:\IAS).
This worked for me.
I am still waiting to hear how (look for my post about 20 below yours) how to configure IFS to use the Apache Web Server that is part of IAS.
Good Luck.
Maybe one of these days Oracle will create an IAS discussion forum. This is my third request and I haven't heard anything back from them yet.
null

How to instal FMS and Wowza Server on same machine.

I want to to instal FMS and Wowza Server on same machine any one know about this please guide me about this.
Thanx in advance.

I have on one server installed both red5,fms and wowza
first install red5 ( by default it uses port 1935 obviously )
then let say wowza , with installation choose port 1936 ( make sure you open this port )- you app will run on rtmp://your-ip/domain.com:1936
then fms - choose port 1937 ( here again make sure you open this port too ) - rtmp://your-ip/domain.com:1937

How to install multiple AirPort devices in the same network?

Can Someone tell me how to install more than One AirPort in the same network?
Does the AirPort Controls rádio channels?
Does they Support Rogue AP?

Hi,
Did you see these how to guides ?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/287bab90-0201-0010-f48e-cc55b0cd13d0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e473ab90-0201-0010-22ac-fdd925cac167
Regards.

Photoshop CS4 - How to install both 64 and 32 bit versions on XP 64

Hello-
When I installed Photoshop CS4 along with the other apps on CS4 Web Premium I thought that both versions of PShop would be installed by default, but that was not the case with my installation; only the 64 bit version was installed.
Now I would like to install the 32 bit version but when I try to do it through setup I am unable to check the box. There is a list of "Installed Products" and then "Available Products"; the only thing under "Available Products" is Photoshop CS4, but I am unable to check the box.
Any ideas on how I can install the 32-bit version? I want it for the GPU acceleration and to use certain plugins.
Thanks,
Paul

a)re: built for XP64 - note that I said "gave the [erroneous] impression," meaning that someone could plausibly infer that PSCS4 64 will not run reliably on XP 64, which is categorically untrue. I am NOT saying that there are not people who have had problems and will continue having problems with PS CS4 on XP 64.* However, I am personally attesting - having worked with PS CS on my XP 64 system a lot since buying it this week, including continuously since I reinstalled last night ( I tend to work at night) - that PS CS4 runs gloriously on XP 64, INCLUDING the OpenGL stuff once you patch the reg via the link I posted (which, by the way, would have been a valid answer to my question).
On that note, telling me stuff that I already know is NOT a valid answer. Further, as we have seen, my running this on XP 64, as opposed to Vista, was irrelevant, if only (but not really only) because that is not the system to which my question referred. How did telling me about Vista help? If you don't know what to do with XP 64, then you don't know....I didn't know either, at least when I posed my question. Your reference to Vista was POINTLESS.
b) re: installing to non-default directory. I have been doing this for so long that I can't remember not doing it, and I have never, ever had a problem like this, and I do have other dual-bit depth apps. This should be a non-issue. If I thought it was relevant I would have mentioned it, but in light of what I just said, it did not seem to be a factor. Crikey- CS3 is in that same directory! Why would Adobe's installer get confused? They are the same structures, i.e. %disk%:\Program Files, %disk%:\Program Files (x86). If you knew things that might cause my problem - you didn't-you might have asked about my install.... Instead, you told me what anyone who had read my question would already know that I knew, namely that there would be two different locations for the two different versions. Incidentally, and here's good intel here, when you do get them both installed, you get BOTH versions listed in your Adobe CS4 whatever edition programs folder. Right there! So, if you had known what you were on about, you would have realized that there was NO WAY that PS 32 was mysteriously hiding somewhere. This is another clue that you knew nothing about the subject you were purportedly answering!
So why, why, why am I picking on you? Because there was a time when you could post a simple question on the internets and some helpful soul would take the time to actually read and consider the question before giving an answer that, even if not ultimately fruitful, was at least in the freaking ballpark. But those days are gone** and even though I know that and I expect nothing, I posted anyway, and along came you, with two heaping helpings of SQUAT in terms of useful advice. What the hey? Are you that bored that you just dole out crappy advice? Watch more TV or something!
Jeez!
Thanks,
Paul
*My relevant system specs are as follows, for those who may want to give XP 64 a shot: and/or are having problems:
XP 64 SP2 ( there is no SP3 for 64 and parenthetically I will note that CS4 on XP 32 SP2 runs fine even though you get a warning on install that it is supposed to have SP3 installed)
8 GB RAM
AMD 64X2 5600 on AMD/ATI 780G Chipset with dual integrated ATI 3200 Graphic plus an extra ATI 3400 card running three different monitors (2 on the 3200 and one on the 3400). On my setup PS likes to enable and actually work with the OpenGL stuff when I launch either/or the 64 or 32 bit version on the monitor that is attached to the 3400 card. After that I can drag the app anywhere I want and it works.
** in July, as myself and my girlfriend were getting ready for our vacation, we posted on a location-specific travel group to ask if people knew if the hotel we were staying at had a safe for our laptop. We got like thirteen responses, all more or less to the effect that we should leave the laptop at home when we go on vacation. Not ONE answer about the hotel! WTF???

How to install the Win XP on my notebook

I have purchased a Satellite notebook, which came with Vista installed and a couple of discs to "rollback" to XP if I so desired.
I find Vista to be an absolute dog of a product, so I inserted my XP disc and waited.
Turns out there is no autorun file on the CD, and no obvious choice of a file to run at all.
Can anyone explain how to return my notebook to the XP operating system?

First of all it would be really useful to know what notebook you have.
Secondly Im asking myself if you have read some threads here in the forum regarding the Win XP installation before you crated this posting
Im not quite sure what the problem could be but Ive got an assumption.
Its possible that you didnt boot up from the Win XP disk. You said you have insered it and waited
The disk should be inserted and the notebook should be OFF.
Then power up the notebook and boot up from the bootable disk
The other possibility could be that you didnt install the SATA drivers (which are necessary for all newer notebooks) and therefore the Win XP cannot recognize the HDD and cannot go through the full setup.
I recommend checking and reading some treads here in the forum regarding the SATA driver and Intel Storage Manger.

How to install clean win 7 32 bit in touchsmart 300

Hello, i buyed touchsmart 300 for work in add multitouch feature to my software MonoTouchLive
I own windows 7 ultimate 100% legally and i do clean instalation, i not really interested in all tools and softare provided by HP, really good pkg, but i really like clean install.
Im very suprised when after try installl widnows 7 ultima, system freeze with BSOD screen due some comflict and installation die.
Its not possible install win7 32 bit on touchsmart 300 due some conflict, i researcha little and discover way to install windows 7 without trouble:
Step 1, With the Windows 7 DVD in your DVD drive press any key when promped @ 'Press any key to boot from CD / DVD...', as soon as the message is gone, quickly press F8 to show the boot options list. Select Safe Mode and install 7. It will allow the initial stages & file copying.
Step 2, When 7 restarts for the first time, press F8 and select 'safe mode'. A dialog box will appear stating that windows cannot continue in safe mode 'ok' to restart.
WARNING don press ok !!!
read step 3
Step 3, press SHIFT+F10 to open the command prompt and direct youself to x:\windows\system32
Code:
cd\windows
cd system32
then type CompMgmtLauncher (it takes a few seconds to load) you can then access device manager from this console.
Step 4, Select DEVICE MANAGER , and disable all yellow devices is the offending hardware & choose to disable it. JUST LEAVE ENABLE NETWORK ADAPTERS !
Close command window and click ok on the dialog box. Windows will use a standard driver (with less funtionality) when it restarts.
Once installation has finished enabel windows update, taht isntall video drivers and others, the go to device manager and select yelow device drivers, make right lick select update driver.
That fix and isntall missing drivers !! : )
Hoppe this help !
This is usefull for windows 7 32 bits.
I tested with windows 64 and install perfectly without troubles !!
After clean install, this devices not work at 100% ot just not work:
Brighnes display selector not work correctly:
Only can setup bright from POWER OPTIONS ---> change plan settings
Then move the bright slider and press save changes, and newe bright value is configured.
The control volumen buttons in the left of the machine not work, i dontreally use so i not find how fix, probably somebody form HP can inform hoy fix this.
Sorry for my bad english, my native language is spanish !
Best regards !

Hi Guys,
I have the solution to your problems and I will go ahead an explain it in detail so that no questions will be raised.
I have struggled to get WINDOWS 7 (32BIT) to run on the Touchsmart 300 PC now for three days (and nights) but I know how you can do it.
The problem lies within the VGA Adapter (Graphics Card) this little buddy has incompatible drivers with the inbuilt functions of the Touchsmart PC in its generic (Windows Preloaded) form. Therefore what you can do is the this.
Step 1: Insert Windows 7 (32Bit) disk and start the setup process and follow it until it hits the problem. (Millisecond of Bluescreen)
Step 2: Once the PC starts booting repeatedly press F8 (I mean it just keep on pressing that button until you can select "Safe Mode")
Step3: Once Windows Setup screen is back it will tell you an error! Which is good. INSTEAD of pressing "OK" (to restart) press SHIFT + F10 (opens the command prompt)
Step4: You should automatically be in \Windows\System32 now enter the following command: CompMgmtLauncher (This is the Device Manager).
(If the default directory is not System32 the navigate to it by entering "cd windows" and "cd system 32" (cd = change directory)
Step5: In the Device Manager (do not worry it will take some time to load) select navigate to "Display Adapters" - "ATI Radeon ..." RIGHT-CLICK on it and choose disable. (To be sure Windows will not have any other troubles you should do the same for all highlighted devices. the once with the yellow triangle)
Step6: Once this is done restart your system and let the install run into the normal mode and finish the install.
Step7: Once Windows starts for the first time. Use the provided ATI Radeon Driver from HP (NOT the original one) from the support download website to install the correct driver.
Step8: Resart and enjoy!
Hope this helps and let me say to AMD/ATI yopu guys really suck at your one product drivers!
Cheers and Out.

How to install and migrate info to a new laptop with Win 8

I got a laptop a few days ago with Win 8.... I am totally lost. I installed FF and it shows on my desktop :)
Now I need to transfer all my data there. I created a new profile in the desktop (Win 7) in case... Then what???
I don't know where to find the info I am familiar with. I use FF 22.
Can you please help me (again!)?
I will have to do the same from an old laptop (Win XP) to the new one.
Thank you very much

Hi JenL27, the Profile Manager lets you see ALL your currently existing Firefox profiles and choose the one you want to use.
Start the profile manager again, select your original profile, and start Firefox using that one. It will be a lot easier to work with your data that way.
IMPORTANT: Do not delete any profiles without making good backups.

How do install both 3.6 and 4.0 on different profiles?

I have FF 4.0. I would like to keep up with it as it improves. In the meantime, 3.6 was faster switching tabs and loading most sites. How do I load FF 3.6 and put it on a different profile.

Do a custom install and install each version in its own program folder to use multiple Firefox versions.
* [[Custom installation of Firefox on Windows]]
Create a new profile exclusively for each Firefox version and create a desktop shortcut with -P "profile" appended to the target to launch each Firefox version with its own profile.
See these mozillaZine KB articles for information:
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

Portege 3110CT: How to install the Win XP or Win 2000?

I have old Portege 3110CT. Additionally I have floppy drive (which works fine) and CD-ROM F-TO-TCD-24L (PCMCI).
What I was going to do was to install Windows 2000. There is no posibility to boot install CD so I created start disks (x4).
After 4th disk booted I found the message that system is unable to find CDROM drive...
So I am asking you is there any way to install Windows 2000 or XP on that hardware ?
I wonder how?

yes, it is possible to install w2000 ( I won't advise to install XP, it will run too slow on a 3110 )
You need the proper drivers for your pcmcia-CD-drive and copy them to a dos-bootdisk
start-up with the bootdisk and go to your CD-drive with the W2000-CD in it
then type cd\i386 and start winnt.exe in that directory, it will install W2000 without problems.
because the DOS-envirement won't recognize a NTFS-partition, your harddisk must be formatted fat32.
in this earlier discussion you will find all the information you need about dos-diskettes, CD-drivers etc.... : http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232&messageID=70382

How to instal both win 7 & 8 in a same laptop?

Similar Messages

Maybe you are looking for