How to Install 11i on existing 10g and APEX setup

Dear All,
I am planning to install 11i EBS on my XP machine that already has oracle 10g and apex 3.2 installed. I am little worried that my lack on experience with EBS may end up me messing-up my existing database and setup. I am new to EBS but have good experience with Oracle database. I am looking for some pointers that will guide me to safer landing with 11i installation. Can you please advise what steps/precautions I need to consider before installing 11i on existing 10g database?
Thanks
Aali

Hi ali;
I am planning to install 11i EBS on my XP machine that already has oracle 10g and apex 3.2 installed. I am little worried that my lack on experience with EBS may end up me messing-up my existing database and setup. I am new to EBS but have good experience with Oracle database. I am looking for some pointers that will guide me to safer landing with 11i installation. Can you please advise what steps/precautions I need to consider before installing 11i on existing 10g database?I belive you can make this installation but i wonder your XP machine can run all those in same time? I suggest use Wmware or oracle Wm and make installation on it.
Regard
Helios

Similar Messages

Installed Oracle Application Server 10g and Dev. Suite 10g to self practice

Hello,
I have Installed Oracle Application Server 10g and Developer Suite 10g on Windows XP 32.bit to practice Developer suite specially Forms and reports. Server has created the database by default.
My questions are:
1. Can i use default database for practice?
2. Which Configuration Assistants mainly i need to configure in this regard?
3. Do i need to install anything else?
I am newbie to Oracle trying to self learning.
Any help will b appreciated.
With regards,
MOHAMMED AJAZ.

hi
open the following pdf it will help u too.
http://students.heinz.cmu.edu/docs/Oracle_10g_R2_Installation.pdf
Can i use default database for practice?
Did u install oracle database? if not then it will be better please install.
sarah

How to install FLEX in SAP WAS and How to deploy project into SAP EP ?

Hi.
I want to create SAP EP Contents using FLEX and I have serveral question about this.
1. How to install Flex into SAP EP and What do I have to install ?
2. When we developing SAP EP Contents using FLEX,
Which Tool do I have to use ? (NWDS or Flex Builder)
3. After we develop contents, How can I deploy into SAP EP and
How to create iView for Flex Application ?
Sorry for many question.
Kindly explain this.
Regads, Arnold.

Hi Arnold,
here my answers to your questions:
1) You don't need to install flex under EP, you need only adobe flash player 9 on EP
2) If you want to develop a SAP Ep cont using Flex, you need adobe flex builder 2 or 3 (ide based).
3)You can store under any EP folder (es. KM) the .swf object and html page of FLEX application, create an iView and call the url link
or load the .swf as mime object in BSP on backend syst, include in a bsp page and create iView for bsp..
Regards
Raffaele

How to install Nokia Messaging Software (Push and ...

How to install Nokia Messaging Software (Push and Pull email) on SD CARD?
I have got Nokia Push email instaled on NOKIA 6110 Navigator. This instalation take all of my phone internal memory, and mailbox is in phone internal memory too. How to install or move program or mailbox to SD card?

I'm surprised that Nokia will spend all that effort to miss out on one little detail - EMAILS WITH ATTACHMENTS TAKES UP A LOT OF SPACE - The least they could do was allow us to point the application storage to the SDHC card.
I love the messaging app, but I just can't afford to give up so much phone memory - So it is not getting installed until we can point storage to the SDHC card.

Oracle application server 10g and apex

Hi allm
Can someone show me a guide on how to use Oracle Application Server 10g with APEX. I'm currently using Oracle HTTP Server but decided to use OAS instead so that I can use the Report Server and the Oracle BI Publisher for the reports.
I'm currently using this guide (http://www.oracle.com/technology/products/database/application_express/howtos/howto_useoas10g.html) but I can't seem to find the marvel.conf and the oracle_apache.conf.
Also, is it really necessary to use OAS instead of Oracle HTTP Server if I want to use Oracle BI Publisher?
Thanks.
Allen
Edited by: A.Sandiego on Sep 3, 2008 12:01 AM

Hi,
Thanks for the response.
Unfortunately I still get the same problem. Somehow I just can't find the marvel.conf anywhere in my machine. I setup my APEX not by using the companion cd but by downloading the apex_3.1.2 then running the apexins.sql. Then install the Oracle HTTP Server only and configured the dads.conf located in the ORACLE_HTTP_SERVER_HOME/Apache/Apache/mod_plsql/conf. It works perfectly with this.
I then installed Oracle Application Server 10g. I'm trying to figure out how to use this instead of the Oracle HTTP Server.
Thanks.
Allen

Where to locate HTTP Server for use with Oracle Express 10g and Apex?

Hello,
Im a newbie and I downloaded oracle express 10g and Apex 3.2.1. The Apex install is referencing "choosing a HTTP Server" specifically "Oracle HTTP Server and mod_plsql and the embedded PL/SQL Gateway". My question is do the HTTP server or PL SQL embedded Gateway come with the 10g install or do I need to download them seperately? If so where can I locate them?
Thank you!

user12027813 wrote:
If using Oracle XE, then which APEX install scenario would I used if I downloaded both the XE and apex from the OTN?Oracle XE includes APEX 2.1 and uses the PL/SQL Gateway for HTTP service work. No separate HTTP Server is required.
If, after you install XE, you want to upgrade to APEX 3.x, you would select the PL/SQL Gateway for the upgrade.
If the PL/SQL Gateway (EPG) does not provide the full set of services you need, you could put a regular Apache in front and redirect to APEX for those specific issues.
If that is to complicated, then you could license Oracle Application Server Standard Edition 1 (for a fee) to get an Oracle HTTP Server and it's mod_plsql to replace the internal EPG.

How to install the EUL5 Business Area and seeded reports for Ora Apps 11i

Hi All,
We have to install the EUL5 Business Area and seeded reports for Ora Apps 11i.
I think there are scripts which need to be executed to create the BA and the Disco seeded reports. I am kind of confused about the whole think. Any pointers as to where to look foe the scripts would be really appreciated.
I am using disco version 10.1.2.48.18.
Thanks.

Hi,
You need to work though Metalink Note 313418.1.
Rod West

How to Install Grid control for 10g (WINDOWS)

Dear All,
This is the first time i am going to test on Grid control. i have lot of droughts from the beginning...
what is the first step to install, database or grid control tool.(*Windows*)
i am downloading the below software from e-delivery
Oracle Enterprise Manager 10g Release 5 Grid Control (10.2.0.5.0) Patch for Microsoft Windows (32-bit) (Part 1 of 2) V15628-01 Part 1 of 2 1.1G
Oracle Enterprise Manager 10g Release 5 Grid Control (10.2.0.5.0) Patch for Microsoft Windows (32-bit) (Part 2 of 2) V15628-01 Part 2 of 2 1.1G
Is the above software containing _10g database alone_, or its with Grid control, if its with grid control kindly let me know how to install ,, kindly don't give me oracle documents. please explain me int his blog itself or some different blogs.
Any one explain me what is the step i have to take after this,, ??
Thanks
Abdull
Edited by: user9111553 on Nov 23, 2010 12:01 AM

Hi Miguel,
Could you help me? Full and base version of what?
For instance, i have Oracle 10.2.0.4 version and did not check EM during instalation oracle sw. So what is the first step to install and configure Grid Control? i downloaded Grid Control and read readme file. There is information that i need to install OEM and then Grid Control. did i understand right way or misunderstood? could you show me steps for implement Grid Control with 10g on Windows?
regards and thanks,
rustam

How to access MYSQL from Oracle 10g and vice versa

I will like to know how do I create a database link between Oracle 10g and MYSQL database on windows. I have been saddled with responsibility of ensuring the communications between the 2 databases and I have searched everywhere on google, I could not find anywhere where this is explain explicitly and made work.
THank you

In general Oracle offers 2 different products to connect from an Oracle database to a MS SQL Server. The first product is for free and it is called
As DG4ODBC is a generic connectivity based on ODBC it allows you to connect to many foreign databases as long as you have a suitable ODBC driver.It for example allows you to read from text files but also connect to foreign databases like MS SQL Server or IBM DB2. Due to this wide variety of foreign data sources tha capabilities of DG4ODBC are very limited. It only supports a few Oracle functions that it can directly map to foreign database equivalents. All other functions will be post processed. Post processing means that ALL records from the foreign table(s) will be fetched into the Oracle database and the result is then processed locally - so depending on the amount of data stored in the foreign database it might take a while.
To be complete here some notes to follow up:
This Oracle support note describes possible options you have to connect to a foreign database:
Document 233876.1 Options for Connecting to Foreign Data Stores and Non-Oracle Databases - For example - DB2, SQL*Server, Sybase, Informix, Teradata, MySQL
So you see, to connect from Oracle to MySQL you need to use the Database gateway for ODBC release 11.2 (HSODBC which was shipped with 10g was desupported in march 2008).
The Database Gateway for ODBC 11.2 (=DG4ODBC) license is included in the Oracle database license and it allows you to connect with a suitable 3rd party ODBC driver to a foreign database.
For your MySQL connection you only need to download and configure the MySQL ODBC driver from the MySQL web site. Once you can connect with the ODBC driver you could then download and configure DG4ODBC.
As you didn't post on which platform your Oracle database is installed, here 2 notes for common platforms:
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle (Doc ID 561033.1)
How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on 64bit Windows Operating Systems to Connect to Non-Oracle Databases Post Install (Doc ID 1266572.1)
- Klaus

How to install Dual OS(solaris 10 and Windows XP)?

I have got a 80 gb sata hard disk and i am not able to install Dual OS(solaris and Windows XP ) on it.My Partitions are as follows:
Primary partition-5GB
Remaining are extended Partition.
Extended partition details
8 gb NTFS partition(installed windows XP)
7 gb NTFS partiton(No data in it)
20 gb NTFS partition(No data in it)
20 gb NTFS partiton(has data in it)
15 gb RAW partiton
I first installed Windows xp on 8 gb Extended partiton.Then when i installed Solaris i could see only 2 partitons.One with the 5 gb and the other with the 71 gb.I actually wanted to install my solaris on the 15 gb Raw partition.Since i could not see the partition(15 gb Raw) i installed solaris on the 5 gb partition.Now when the comp boots it goes to solairs os only.i dont have the option to choose windows at all.
could any one of you explain me how the partitions are supposed to be and how could i make it as a Dual OS.
Saravanan
Message was edited by:
SaravananMandala

Windows uses the primary partiton for boot, too, even if you installed it on the NTFS volume in the extended partition. Wherever you install Windows, it will need the primary partition for booting. You can never boot from Windows extended partitions
As for the 15Gb raw partition, it look like what you call 'RAW partition' is actually just a small little part inside the extended partition. All your NTFS partitions (and your RAW partiton) are logical volumes and they all reside inside the extended partition. Even though Windows sees them as separate drives, each with its own drive letter, just as it sees the primary partition.
You may try do use Windows fdisk or diskpart to delete the last logical volume in the extended partition, and then get the ntfs resize tool from Linux, or the CD1 from the Debian Linux install CDs, which has it included and accessible with a nice user interface, and resize your extended partition.
I don't know if it works, I only used it to also resize some logical volume inside the partition. ntfs resize tool might not be easy to work with, you will need to read its documentation, but it does resize NTFS partitions (I have seen it).
If it works, then you will have your 15Gb as unallocated space available for a new partition. Let the Solaris installer create this new partition automatically during install.
Timothy Madden,
Romania

How to install Oracle Developer Suite 10g (10.1.2.0.2) for Linux

Hi All,
Please let me know how to install oracle forms on Linux red hat. I need to configure it with oracle database 10gR2. Please provide me step by step installation and configuration giude or you can pass on readme file which comes with the software.
Thanks,
Rahul

user8722581 wrote:
Hi ,
Given link is good and I can understand the architecture that it will be 3 tier--DB server-Application Server and Web Browser where Developer will access forms.
I would appreciate if you can provide some screen shots for the configuration details and files to be modified for the port and deploying the forms.
Whether we need to install apache,http or oracle application suite for the linux will take care?
Is there any pre-requisite health checktool like RDA.sh for the rdbms? Please let me know what are the important configuration file.
What is identity management in this?
Thanks.
Edited by: user8722581 on May 8, 2013 11:07 PMAll pre-req. are covered in the installation manual -- http://docs.oracle.com/cd/B19375_07/doc/frs/install/B19314_02/toc.htm
Thanks,
Hussein

How to create dblink between oracle 10G and mysql

I want to create dblink between oracle 10G and mysql
I create it in ECC6.0 using DBCO transaction tcode,which database type can choose?Microsoft sql server?Because there have no mysql item.
I choosed MSS so that I can test it, but it failed,there is an error that 'ORA-12569:TNS:packet checksun failure'.
I configured the oracle tnsnames.ora file like this:
     CW.WORLD =
           (DESCRIPTION =
                (ADDRESS_LIST =
                      (ADDRESS =
                              (COMMUNITY = SAP,WORLD)
                              (PROTOCOL = TCP)
                              (HOST = XX.XX.XX.XX)
                              (PORT = XXXX)
               (CONNECT_DATA =
                    (SID = XXX )
               (HS = ok )
When I tnsping CW,it will fail,like this " TNS-12569:TNS:packet checksum failure"
How can I do.

I want to know if this possible?

How to install tamil fonts to read and write non pdf files

Hi,
i bought a new mac book pro...i want to edit my documents which are typed in vanavil avvaiyar a tamil font...but i dont know how to install it..and i hav a duobt that whether this mac may support tamil fonts in mac office.....

The Mac supports Tamil input Method and lists Anjal and Tamil99.
Microsoft Office probably does not.

How to install my ipod shuffle back and get down loads

how to install ipod shuffle

Are you shure this is an ipod shuffle, because the ipod shuffle dsent have a screen. If it is shuffle down load itunes on your computer, plug the headphone/usb that came with it into the ipods headphone port. Then connect the ipod into your computer and i tunes should recagnize it and walk you through every thing elese.

Qosmio G20 - How to install with one single HDD and without RAID?

I want to set up Qosimo G20 new with Windows XP 32.
I bought a new harddisk and put it into slot 1. I would like to run it without any RAID (so slot 2 is empty)
XP installation CD did not discover the HD
I entered BIOS to see if the HD was there - The HD is recognized normal
then I thought I have to change RAID to JBOD (page 3 BIOS) but this did not work
I confirmed it with the 1234 key - but nothing hapened.
In another task they said to install RAID-drivers (pressing F6... while starting XP installation)
I put the drivers on a USB-stick - but the system will not discover it (and there is no floppy drive)
I have no idea how to install XP on this Laptop.
Any hints?
Chris

>I put the drivers on a USB-stick - but the system will not discover it (and there is no floppy drive)
Win XP does not recognize USB flash memory while setup. This is possible since Vista OS so either you will need a USB floppy drive or you will built a new Win XP CD and will add the RAID driver using the nLite software.
Here is a nice FAQ how to add the RAID (or SATA driver) to using nLite.
http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm
Note: this describes how to add the SATA drivers you have to add the RAID drivers so dont use SATA driver but RAID driver
Good luck

How to Install 11i on existing 10g and APEX setup

Similar Messages

Maybe you are looking for