How to install 2nd time???
Hey all.
I installed and have now used my AE and Mac for about 2 months, but today after downloading an upgrade to my AE it suddenly wouldnt work anymore.
I´ve tried following all the suggested steps for installing and I have tried to reset my AE. I im no longer able to see the "internets name" which i wrote the first time I installed the AE and when i try searching for wireless internet via the Airport Utility it wont find the AE. Eventhough its green.
Can anybody help me, please.
When configuring an AirPort Extreme or Airport Express device with AirPort Utility, it's always best to connect the configuring computer to the device by Ethernet cable.
If AirPort Utility still fails to locate the device, go through the resetting routines once again.
Similar Messages
-
My concern is how to install facetime apps ob my iphone 4s.,is anyone here have an idea??
You can't and there are no FaceTime apps to be installed.
If your phone does no have FaceTime on it already, then there is nothing that you can do to get it except buy a new phone.
That is it - you cannot get FaceTime on a phone that does not have it. -
How can install face time on my ipad mini?
I bought ipad mini and dont have face time how can i nstall face time apps?
Facetime is integrated with iOS 7. It's somewhere on your iPad.
Swipe down anywhere on the screen, and it will open up Search. Type in Facetime and it'll show you where it's located. -
How to install 2nd CD after booting
Hi,
I selected the Complete installation for Solaris 8 x86. After the first CD installed, the machine booted up but couldn't start the installer because the X server was only in 16 color mode. I am running on an Intel810. I have successfully installed Solaris 8 x86 on a different machine with a S3 graphics card.
How do I allow the installer to complete installation of the second CDROM which contains all the SUNWhea and other packges?
best regards
DevOr just do this:
Boot your machine and when dtlogin starts you up, open a terminal and type:
/etc/init.d/dtlogin stop
This should take you into command line mode. Now type "kdmconfig -u" and then type "init 6". This should reboot your machine and the WebStart installer should start in command line mode. You can then add patches afterwards. If Solaris boots and asks you to enter the root password because it tries to run kdmconfig, simply press ctrl+d.
Alex -
How to install Real Time Conference component?
Hello everybody!
It's possible to install the "OC4J_imeeting" the OCS webconference component, when i've an already installed and configured OCS infra and middle tier? If it can be done, how can i do it? Trough OUI? I don't have the "OC4J_meeting" listed on the OCS applications Tier, so, i need to install it. Someone have already installed in environment like this?
Thanks!!i have a related problem i don't know from where i can configure RTC, i clicked on the button "Configure Components" as you mentioned before but the RTC is not listed,
please help me because nothing works....
Thanks -
Satellite A300-1J1 - How to install 2nd HDD?
Hello
I bought a Satellite A300 and I see in the specifications that is possible to add a 2nd hdd. So I bought one and when I opened the hdd box, I didn't find a connector to connect to my hdd. I think I must install a SATA connector but I didn't find any way to proceed.
Thanks
PS : Excuse me if you find mistakes, I doesn't speak very wellHello
Thans for your answers.
Here is the link http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&PRODUCT_ID=1 056110
By the way, I'll take a photo to show you the box, maybe the connector is inside but I didn't notice it.
Thanks
PS : they changed specifications of the product, removing "box for 2nd hdd". You can see on this site, for example, and for french speakers http://www.ldlc-pro.com/fiche/PB00075521.html that they say "hdd 250 go + box for a 2nd hdd" -
I buying iPhone 4S in Saudi Arabia. But I am using in india. I wants to install FaceTime. Any one help me.
You cannot install it. iphone bought in KAS or UAE have facetime disabled by law. Shifting to another country foes not make facetime appear. You might use skype or something ike that
-
How do I install Face Time on My MacBook Air
Can someone tell me how I install Face Time on my MacBook Air please?
Buy it from the Mac App Store...
If you've done that, installation is otherwise transparent. -
Install 2nd HDD in Satellite S55 Laptop
How to install 2nd HDD in Satellite S55 Laptop ?
I doubt there is enough space to install another HDD. You can replace your DVD/CD-Rom with HDD Caddy to install another HDD if you are willing to get rid of DVD/CD-Rom.
Search for "Satellite S55 hdd caddy" from Google, for an example: http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=539
Maybe you can find them cheaper or ebay... -
Error when install Windows 7 2nd time [ boot screen coming always ]
When I install windows 7 for 2nd time, I can`t continue installing because of, a boot a screen coming always.
It is, choose a OS to continue and auto installation of windows 7 can`t run.
Please help me.How did you install Windows 7 for 2nd time, with a installation disk? Make sure to enter the boot menu, then choose to boot from CD\DVD.
More instructions, you can refer to this link
http://windows.microsoft.com/en-in/windows/installing-reinstalling-windows#1TC=windows-7
As arnavsharma said, more information and a screenshot will be helpful
Yolanda Zhu
TechNet Community Support -
How to install Solaris 10 with Win XP on 2nd Hard Drive
hi everyone,
I'm totally new to Solaris. As an enthusiast, I wants to install Solaris 10 on my Win XP PC's 2nd Hard Drive(40GB, empty) from Solaris 10 DVD.
I need help from how to format 2nd Hard Drive to how can I configure the PC so it asks me which OS to load every time.
I will highly appreciate everyone's help as I've just joined SDN. Many Thanx in advance, JagsHappened upon this post while searching for an answer to something else and figured I would give my 2 cents on what you are trying to do so as to offer you some other ideas, as in stuff I have done personally in similar situations, just in case the other suggestions don't work out (and to avoid repartitioning your main hdd if it is your ONLY computer with an OS you have available).
Assuming you have a standard tower or mid-tower with at least 1 free 5 1/4" bay open, and if your motherboard doesn't support booting from a slave drive, and if you prefer a hardware solution so your OS installs are isolated from each other to be certain no corruption happens, like I personally do*. Then you may consider a pair of key lock internal hard drive racks (newegg search "hard drive rack ide" or sata). You would need at least 1 free 5 1/4" bay for the rack mount, then place the hard drives in their housings, each set as master, and you can stick in which ever OS drive you want, turn the key, then boot up (I recommend storing drives not in use in some large anti-static bags for protection). If you have 2 open slots, like I did on my tower, then you can connect both to the same cable and leave both in at all times. Just make sure ONLY 1 drive is keyed "on" at a time, or else you will get errors due to duplicate masters set. Also make sure you ONLY turn the keys when the system is OFF, the racks do NOT make the drives hot-swappable, it is only to offer an easier solution for using multiple hard drives on one PC so you don't have to open the case all the time and potentially damage the pins or the drives when switching them out.. Also you may need longer cables depending on the motherboard controller placement and the size of your tower, 80 wire 40pin if you are dealing with IDE (when you get longer I've noticed less 80 wire and more slower 40 wire cables). As always when dealing with the actual hardware, be extra careful, make sure power is off and PC is unplugged, touch the PC power supply if you don't have better solutions such as anti-static mat/wrist band, etc. You probably know all of this, but just making sure.
*I lost a lot of data one of the first times I tried an open source OS many years ago (some Linux distro, I forget which), I tried to repartition my windows 98 drive, it worked fine for about a week booting between the two, then most my personal windows files suddenly were random sizes and random folders ended up full of garbage files with garbage file names among other peculiar things.. If I partition a drive I generally only do it BEFORE I put data on it or install OS's.. or at least make CERTAIN that I have adequate methods for restoring my OS and personal files (such as imaging my OS install to a larger drive temporarily, etc)..
Anyway, was just offering some possible alternatives to repartitioning your main OS drive.. -TCP -
How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)
This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
here. Maybe this helps other users.
I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
products.
Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
Open a command prompt. CD to the following directory:
\Program Files\Common Files\Lenovo\BMGR
On a german language system (like mine) it is
\Programme\Gemeinsame Dateien\Lenovo\BMGR
If you have an older IBM system the directory may be named
\Program Files\Common Files\IBM\BMGR
or something like that. Maybe you need to search around.
In the following, I will call this the "BMGR dir".
Enter the following command:
bmgr32 /info /v
You should get an output similar to this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
MBR Sector 1 Index: 1 Checksum: 00 Disabled
MBR Sector 2 Index: 4 Checksum: 03 Passed
MBR Sector 3 Index: 5 Checksum: FD Passed
MBR Sector 4 Index: 6 Checksum: 58 Passed
MBR Sector 5 Index: 7 Checksum: 96 Passed
MBR Sector 6 Index: 8 Checksum: 7F Passed
Data Sector Index: 3 Checksum: F1 Passed
Original MBR Index: 2 Checksum: BD Passed
No Patch Sectors
Checksum Byte: 00
Think Flag: 1
WinPE Partition (0-3): 1 Alt Boot Partition (0-3): 1
Boot Config: 2 (Service Partition containing two Service OS's)
Boot State: 0 Alt Boot Flag: 0
(Normal booting operation, will boot to Customer OS)
RRU: 00000000 00000000 Prev Active Part: 255
Previous Partition Type: FF Patch IN: 0 OUT: 0
CIRT Disabled
TOC: 0000000000000000 Lock: 0
Show Error: 0 Halt on Error: 0
CIRT Load Return: 0
CIRT Execute Return: 0
Pause Duration: 10 Scan Code: 0085
F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
Check Msg: There has been a signature failure
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 239 255 255 63 301296177
1 0x00 0x12 0 193 255 239 255 255 301296240 11279520
2 0x00 0x00 0 0 0 0 0 0 0 0
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
for you.
Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
bmgr32 /info /v
The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
shows a smaller value.
Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
Continued in the second post...Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
Opened Master Boot Record to see whose MBR it is.
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 254 255 255 63 109675692
1 0x00 0x07 239 255 255 239 255 255 109676544 191619072
2 0x00 0x12 239 255 255 239 255 255 301296240 11279520
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
Otherwise the following step will likely screw up you harddisk.
Enter the following command (case sensitive?):
bmgr32 /Fbootmgr.bin /m0 /IBM /v
The output will look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
installing MBR
finding free sectors
Sector 9 is free
Sector 10 is free
Sector 11 is free
Sector 12 is free
Sector 13 is free
Sector 14 is free
Sector 15 is free
Sector 16 is free
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Setting Think bit
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
MBR Sector 1 Index: 1 Checksum: 00 Disabled
MBR Sector 2 Index: 11 Checksum: 03 Passed
MBR Sector 3 Index: 12 Checksum: FD Passed
MBR Sector 4 Index: 13 Checksum: 58 Passed
MBR Sector 5 Index: 14 Checksum: 96 Passed
MBR Sector 6 Index: 15 Checksum: 7F Passed
Data Sector Index: 10 Checksum: 01 Passed
Original MBR Index: 9 Checksum: 12 Passed
No Patch Sectors
Checksum Byte: 00
Think Flag: 1
WinPE Partition (0-3): 2 Alt Boot Partition (0-3): 2
Boot Config: 0 (Service Partition containing one Service OS)
Boot State: 0 Alt Boot Flag: 0
(Normal booting operation, will boot to Customer OS)
RRU: 00000000 00000000 Prev Active Part: 255
Previous Partition Type: FF Patch IN: 0 OUT: 0
CIRT Disabled
TOC: 0000000000000000 Lock: 0
Show Error: 0 Halt on Error: 0
CIRT Load Return: 0
CIRT Execute Return: 0
Pause Duration: 10 Scan Code: 0085
F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
Check Msg: There has been a signature failure
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 254 255 255 63 109675692
1 0x00 0x07 239 255 255 239 255 255 109676544 191619072
2 0x00 0x12 239 255 255 239 255 255 301296240 11279520
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
So you have actually regained the Lenovo bootmanager. But you are not done yet.
Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done! -
flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11
I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC -
How can I sync my new iPad with my itunes account on my 4 yr old macbook? I plugged the iPad in once and all music synced. The 2nd time it said update needed. Macbook says no update available.
" how can I sync my iphone to my mac book without losing all the music and pictures on it?"
You cannot. Copy everything you want form the old computer to the new one, then sync it.
it basically says you have to erase your iphone to sync to a new itunes!
Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content. -
How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.
When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial.Hi I'd like to jump in here. Your app showed me this:
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
Destinations:
Plastic Wrapper [Local] (Last used)
Total size: 999.86 GB
Total number of backups: 64
Oldest backup: 2013-07-24 23:25:11 +0000
Last backup: 2013-11-17 01:40:47 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 453.81 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
Thanks,
Darcy
Maybe you are looking for
-
Upgrading SAP ESS and MSS after HR upgrade in ECC 6.0
Hello I am new to SAP netweaver. Our landscape has an ECC 6.0 system integrated with EP 7.0. We recently upgraded our SAP HR from 600(SP 48) to 600(SP61) and EA HR component from 603(SP 22) to 603( SP 35). After the upgrade we came to know that the p
-
Create Function Module Extractor
Hello Friends, Please help me in developing the extractor. I want to write the custom extractor using the three Table fields FAGLFLEXA and FAGLFLEXT with some logic to merge data. if you have any abap code. please email me at [email protected] will b
-
How to get to Factory Installed status?
Hello, Mine is a MBA. Do I have to boot to my original OS DVD to get back to factory installed status on my Mac Book Air? Regards
-
Application scope's duing init()
hi, We have a main servlet, unsuprisingly called "FrontController", where I would like to set an application scoped attribute. In a jsp, I do thinks like "request.setattribute("a", "b", PageContext.AP
-
OMG The Most Annoying Error in the History of iPhoto! "Alert, Photo Missing
This is driving me absolutely insane. EVERY photo that is imported into my iphoto brings an "Alert" that says, "The photo "Blah blah" could not be opened because the original item cannot be found". It's like, I DON'T CARE, upload the photo. How do I