How to install 64bit drivers on Windows 7?

What steps do I need to take in order to find the bootcamp 64 bit drivers for my Macbook Pro Windows 7 partition? I already know that by inserting the OSX install disc that came with my MacBook Pro, will pop up a setup.exe file, but will the wizard find the appropriate drivers? or I should go to the bootcamp64.msi file inside the OSX directory?
Thank You for any help in this matter...

Doesn't the bootcamp drivers wizard install apple software update for that matter? (I already went to visit the site) Well, do I have to let the wizard run or I have to select the bootcamp64.msi installer to get my bootcamp 64bit drivers?
Besides, I have a 2010 Macbook Pro, I can't certify that these drivers will work? Still I will take a look to the link.
Thank You.

Similar Messages

Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7

Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7 using the USB cable. Does anyone have any advise?
Post relates to: HP TouchPad (WiFi)

@MikeNTxs - 64bit USB drivers have been available since April of 2010, and they do work. I've synced successfully to my Vista64 bit laptop many times via USB.
See the sticky thread at the top of this section titled "64bit Palm Desktop drivers are here!"
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How to install bootcamp drivers on Windows 8?

Hello,
Today I decided to install Windows 8 onto my Mac Pro running 10.8.5 in order to play games on Steam. I started BootCamp assistant and made a 65GB partition for Windows 8, and when I tried to install Windows I unchecked the top box (not sure what it said now). Now I have a Windows computer, I CANNOT get back to OS X. The Mac Pro will not boot into OS X, it just goes straight to Windows every time. I've read that there should be some place in Windows to switch back, but I cannot find it. I tried holding down the option key upon boot up at the gray screen, it still goes straight to Windows. I tried holding command R at the boot up screen, it goes straight to Windows. HELP!! I picked the 60.5GB partition to install on, could it have somehow erased my OS X partition? Is there a way to install bootcamp drivers from Windows?
Any help would be greatly appreciated.
Thanks,
Jared

[Enable Bluetooth functionality after a clean installation of Windows 8|http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]
If a clean installation of Windows 8 has been performed, Bluetooth is not present and does not work on your notebook. It is necessary to install two driver components manually to activate the Bluetooth functionality.
- Toshiba System Driver
- If your notebook is equipped with an Atheros or Realtek WLAN card with Bluetooth, you have to download the Atheros or Realtek Bluetooth Filter Driver
- If your notebook is equipped with an INTEL WLAN card with Bluetooth, you don't need to download any filter driver

How to install BootCamp5 drivers for Windows 8?

I have a Mac mini and have installed Windows 8 (64-bit) using Bootcamp. It works fine, but I hear that you should install some drivers. I downloaded them from the apple support website and put them on a usb flashdrive that uses the format "MS-DOS (FAT)".
When I double-click "setup.exe", I get "This app can't run on your PC". When I run as admin it says that it can't find "D:\BootCamp\setup.exe".
It may be worth mentioning that my mac is also running as a server (using the Mac OS X Server app).
How do I fix this?
Let me know if you need any more info...

Finally, the solution! I just had to use another flashdrive. If anybody has this problem, all you have to do is just change flashdrive. In my case the pdf files were corrupted when transferred to the flashdrive, using disk utility seemed to remove most of the folders, and many other files were "broken" as well, so change the flashdrive and it should work!

Portege R500 - How to install 3G-drivers on Windows 7?

I have the PPR50E with the built in 3g-card.
I am unable to install the vista-drivers for the 3g-card, and I haven't found anything on google either.
Anyone gotten it to work on windows 7?

Hi
Did you try to install the 3G driver/software released for the Vista OS.
Did it work on Win 7?
I noticed that many Vista drivers and tools would be compatible with Win 7.
It seems that the 3G module is from Novatel.
I found the Novatel software on the Toshiba European page.
Check it!

How to install Bluethooth drivers on Windows 8 - Satellite S50-A-10P

I bought an Toshiba Satellite S50-A-10P, part number PSKJQE.
I installed Windows 8 x64 and everything is working fine excepting the Bluetooth adapter.
I have found that it is a combo adapter from Atheros, but I can't manage to get it working.
Can you guide me please on solving this issue?
Thank you so much!

[Enable Bluetooth functionality after a clean installation of Windows 8|http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]
If a clean installation of Windows 8 has been performed, Bluetooth is not present and does not work on your notebook. It is necessary to install two driver components manually to activate the Bluetooth functionality.
- Toshiba System Driver
- If your notebook is equipped with an Atheros or Realtek WLAN card with Bluetooth, you have to download the Atheros or Realtek Bluetooth Filter Driver
- If your notebook is equipped with an INTEL WLAN card with Bluetooth, you don't need to download any filter driver

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

Audigy 4 gives blue screen during install of drivers on Windows XP SP3

FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
Asus a8n-sli
GB RAM
6600 GT
Audigy 4
LC Power 550 W PSU
I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
How do get this card to work like it should? I also have a remote control that came together with the card.
Im currently using the onboard AC97 Realtek ALC850 soundcard.
Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

HP Notebook - 15-ac043tu - NOT ABLE TO INSTALL WIFI DRIVERS FOR WINDOWS 7 -64 BIT

I baught HP Notebook - 15-ac043tu. I am not able to install wifi drivers in windows 7 home edition . I have downloaded all drivers from HP Link shown below, http://support.hp.com/in-en/drivers/selfservice/hp-15-ac000-notebook-pc-series/7771404/model/8326116#Z7_3054ICK0K8UDA0AQC11TA930C7 Can anyone help me ?

Hi I am facing a similar issue,Last week I bought my friend this Hp Notebook 15 (15-ac043TU) with DOS, I installed Win8 (64bit) and tried installing drivers from 'http://support.hp.com/, but its not accepting the WLAN drivers, I tried many, available for this model for win7 as well as for win8.1, wondering there was no win8 option, however it should work for Win8, I also followed your suggest but got the same error - "Update.cpp 1205" If you need Hardware Id, on 'Network Controller' - properties in devices manager, it is -PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 Thank you and Regards:Gagan

How to install jdbc drivers

hai how to download jdbcdrivers and how to install these drivers.please give solution

gnomeom wrote:
Hello friend.
You need to install MS-SQL in ur pc.
And then u can find the driver.
After install u need to do this
For example
u need to press windows key and R.
then u need to type. odbcad32Complete and utter useless drivel and garbage.
I have no idea what would possess someone, who obviously knows nothing about what is being discussed, to use their very first forum post to post such tripe.
Just garbage. All of it.
This is JDBC we are talking about. Not ODBC. There are other serious errors too but that's your biggest one.

How to install printer drivers....

HI
Can any body tell me about how to install printer drivers. In my case standard drivers(sapwin,swin ..etc) are not supporting. printer drivers are available in Manufacturer site . Can any body please suggest how to install the drivers.
Please give me the steps ,
Message was edited by:
venkateshwarlu veeramalla

You will need to create separate device types for each printer family installed at your installation or if each printer family require either simplex or duplex printing.
1. Go to Spool Administration screen by using transaction code SPAD from the initial screen of SAP.
2. From the SPAD screen choose menu path Utilities-->for device types --> IMPORT (or you can run RSTXSCRP program from SE38, too).
3. In the initial screen of SAPscript Export to Dataset/SAPscript Import from Dataset enter the following:
a) Check Radio button for device type.
b) In the Object Name field enter object name of the device type file (please see the table at the end of this document for object names)
c) MODE must be IMPORT
In the Ctrl parameters for file operation
d) Check radio button for "From/on frontend" ( Generally this would be the default)
That's it. Don't enter anything else. Execute by clicking execute button or function key F8.
4. In the Create Object Directory Entry window that pops up, enter your development class and press enter
5. You will get a pop up Window Import from a Local File. Browse through the Window to enter the filename in your local directory and click Transfer button.

How to install SOA 10g on Windows 7 64-bit platform?

Hi Friends
How to install SOA 10g on Windows 7 64-bit platform ?
I've downloaded the 64-bit version downloadable from OTN and able to run the irca.bat on DB 10.2.0.3 however the SOA Installer fails at BPEL Config Assistant step with errors :
deploy-applications:
Deploying Oracle BPEL Process Manager ...
Copying 1 file to C:\SOA134\bpel\system\services\lib
Copying 1 file to C:\SOA134\bpel\system\services\lib
Copying 1 file to C:\SOA134\bpel\system\services\lib
Updating jar: C:\SOA134\bpel\system\services\lib\orabpel.ear
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://<domain name>:6003/oc4j_soa -script C:\SOA134\bpel\system\services\install\ant-tasks/bpel_deployapps.txt
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.

Hi,
We know now why SOA Installer fails...
Now we need to know why you can not start OC4J properly. What do you see in the log files?
https://forums.oracle.com/forums/ann.jspa?annID=893
Cheers,
Vlad

How to install Oracle 11gR2 on Windows 7

Hi friend;
There are many questions about *"how we can make instalaltion on win7"*. Thatswhy i made one video tutorial which is mention *"How to install Oracle 11gR2 on Windows 7*
Its avaliable at my blog:
*http://heliosguneserol.wordpress.com/*
Hope it helps who need to make this installation
Regard
Helios

This question is not related to the Database Migration Assistant for Unicode (DMU). Please, post your question to one of the more appropriate forums, for example:
General Database Discussions
Database Installation
-- Sergiusz

How to install ODBC Drivers in Oracle

Hello All,
I want to install ODBC Drivers (from Oracle vender, Not from the DataDirect ).
I have downloaded the ODBC Drivers for Sparc( from official Oracle website) but while installation it is asking for DriverManagers Installtion..
Where Can I get this Driver Manager........
Please help me how to install ODBC Drivers on Unix platforms....
Sridhar.

Please help me how to install ODBC Drivers on Unix platforms....You should be able to install them as a component of your client (or server) installation. Just use the Oracle Installer to add them.
~Jer

How to Install or Run on Windows Xp/7

Hi, I just see the bin/kvctl for Linux.
How to Install o Run on Windows ?

The actual command to invoke kvlite is pretty simple. From the bottom of the kvlite script:
java $LOGGING -cp $LIBDIR/kvstore-1.1.100.jar oracle.kv.util.kvlite.KVLite -root $KVROOT -store $KVSTORE -host $HOSTNAME -port $REGPORT $ADMINPORT
Here is a .cmd file that you can use (it's not supported). Some of our developers run on Windows but it is not a supported platform since we don't run our qualification tests on it. It's Java code, so in theory, "it should just work".
@ECHO OFF
CLS
SET RETURN_CODE=
SETLOCAL
echo %~dp0
SET HERE=%CD%
SET BINDIR=%~dp0
cd %HERE%
SET LIBDIR=%BINDIR%\..\lib
SET EXAMPLEDIR=%BINDIR%\..\examples
SET KVSTORE=kvstore
SET HOSTNAME=127.0.0.1
SET REGPORT=5000
SET KVROOT=kvroot
SET LOGGING=
SET ADMINPORT=
setlocal enabledelayedexpansion
:LOOP_ARGS
SET ARGNAME=%1
SET ARGVALUE=%2
IF NOT "%1"=="" (
IF "%ARGNAME%"=="-store" (
SET KVSTORE=%ARGVALUE%
SHIFT
SHIFT
) ELSE (
IF "%ARGNAME%"=="-port" (
SET REGPORT=%ARGVALUE%
SHIFT
SHIFT
) ELSE (
IF "%ARGNAME%"=="-root" (
SET KVROOT=%ARGVALUE%
SHIFT
SHIFT
) ELSE (
IF "%ARGNAME%"=="-host" (
SET HOSTNAME=%ARGVALUE%
SHIFT
SHIFT
) ELSE (
IF "%ARGNAME%"=="-admin" (
SET ADMINPORT=-admin %ARGVALUE%
SHIFT
SHIFT
) ELSE (
IF "%ARGNAME%"=="-logging" (
SET LOGGING=-Djava.util.logging.config.file=%EXAMPLEDIR%
/logging.properties
SHIFT
) ELSE (
IF "%ARGNAME%"=="-usage" (
call:USAGE
GOTO:end
) ELSE (
IF "%ARGNAME%"=="-help" (
call:USAGE
GOTO:end
GOTO LOOP_ARGS
IF NOT EXIST %KVROOT% (
MKDIR %KVROOT%
echo Store "%KVSTORE%" starting ...
java %LOGGING% -cp %LIBDIR%/kvstore-1.1.100.jar oracle.kv.util.kvlite.KVLite -root %KVROOT% -store %KVSTORE% -host %HOSTNAME% -port %REGPORT% %ADMINPORT%
echo.&goto:eof
::-- Usage Function
:USAGE
echo Usage: run-kvlite.sh [-help]
echo [-logging]
echo [-store storeName]
echo [-port port]
echo [-host hostname]
echo [-root rootDir]
echo [-admin adminPort]
echo -logging enables console logging
echo -store defaults to kvstore
echo -port defaults to 5000
echo -host defaults to localhost
echo -root defaults to ./kvroot and is created on demand
:end

How to install 64bit drivers on Windows 7?

Similar Messages

Maybe you are looking for