How to install 7.1 latest device software on Curve 9220

Hi Guys,
Please guide me to install latest software update manually on my curve 9220, as I have 7.1.0.1137 Os installed default and got updated OS from blackberry website. I have downloaded and installed it on my system but dont know how to install it on the device.
Please help me to do this.
Awaiting for your reply
Thanks in advance.
Nishant
Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.

Hi nishantpotdar,
Welcome to the Community,
There are already many thread related to OS update you can search it in the Search box ,any to update an OS all you need is a PC or Laptop,an internet Connection and a USB cable.As you told you had already Downloaded and installed the OS in your PC you may continue from step  5 ( make sure it is not from any other Carrier then your's)
Before that take a backup of your device using desktop software.then follow the sequence :
1. On your Pc change your folders option to show hidden files/folders then On your PC or Laptop uninstall any previous OS packages ( remove any files related to RIM go to  C:\Program Files\Common Files\Research In Motion  : remove any Readme file also)uninstall your previous Desktop software Go to contol panel > uninstall programs > remove desktop software.
2 . Download the latest BB Desktop Software from here Blackberry Desktop Software
3.Locate your Carrier and Download the OS you desire from here and Install it in your PC or Laptop Carrier
   If the OS that you are downloading is from your official carrier, skip step 4, if you got it from other carriersThen      follow:
4.Search your C: drive for Vendor.xml and delete them, there may be one or two vendor.xml file :
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\Windows UserName\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
5. Go to C:\Program Files\Common Files\Research In Motion\AppLoader. (For 64-bit Vista or Windows 7, the path will be C: > Program Files x86 > Common Files > Research In Motion > AppLoader) double click Loader.exe.
6. let the update complete.
If During the installation error "507" appear simply unplug the your Blackberry using USB cord  and then re-insert it ,and  the install will continue.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

  • How to install Hp deskjet 3050 Jobs software on Windows 8.1 Desktop putter

    how to install Hp deskjet 3050 J610 software on Windows 8.1 Desktop HP Pavillion

    Hello @dougz ,
    Welcome to the HP forums.
    I understand that you would like to know how to install your deskjet 3050 software onto your Windows 8.1 desktop.
    It should be as easy as installing the printers driver. Just download the software and follow the on screen prompts. 
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • What is the latest device software?

    hi, can you please tell me what is the latest device software official relase for bb 9900 ?

    Change logs are the responsibility of the carriers to release, and so many of them just never do so. In general, a later OS level would be "better" than an older one, as it would contain bug fixes and new features/functions that are absent in the older version. But, nothing more exact than that can be provided...it is up to you to choose the OS level you desire to operate on.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • MAX 14.0 broken and database corrupt after installing LV2014 and latest device drivers

    I have LV2012 and 2013 (both 32-bit) installed on my Win8.1 64-bit system and have used them without problem.  I recently went through the agony of installing LV2014 32-bit from Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work.  Firstly, it is slow to populate the System information display, secondly when I try to expand a tree I get a MAX Database Connection Error (see attached), and there is no software listed at all.  Thirdly, devices are not listed properly even though appearing in Device Manager (eg. a CAN interface no longer lists CAN0 but does show the device but no configuration, same for USB DAQ devices I(see attached), and I do have CAN 14.0 installed), and there is nothing under Data Neighborhood. 
    Initial attempts to install LV2014 were prevented by the NI mDNS Responder and related services not stopping when required by the installer.  This also affected attempts to repair MAX.
    All 3 versions of LabVIEW run OK, but projects no longer include remote or RIO/FPGA hardware - possibly due to uninstalled support software - but without the software list in MAX I cannot tell what is and isn't installed.
    I have performed a Reset Configuration Data, repaired MAX several times, uninstalled it (any all dependencies), turned of the firewall and virus software, and completely reinstalled LV2012, LV2013, LV2014, and device drivers, but with no change to the problem.  I have now lost 2 whole days and I am getting desperate for a fix.  Surely this cannot be the only case of this in the whole world.
    Mike
    CLD & Alliance Member, UK
    Solved!
    Go to Solution.
    Attachments:
    MAX problems.jpg ‏218 KB
    NI mDNS errors.jpg ‏102 KB
    MAX Devices.jpg ‏83 KB

    Hi Dr.M
    In order to workaround and repair your MAX problems , please see the following article (the Knowledge based article mentionned in the error):
    I know you have been through a couple of these steps , but there may be some related links that could help as well.
    http://digital.ni.com/public.nsf/allkb/B9107A7F281​F9B408625720B0078E5A8?OpenDocument
    As for your installation errors:
    This error happens when a service gets hung up in a "stopping" state that does not allow the installer or uninstaller to remove it.  This can happen with a number of different services, but it has appeared to happen mostly with the Lookout Citadel Server (lkcitadel server) and National Instruments Time Synchronization (lkTimeSync).
    -To resolve the issue, open up the Services application by going to Start»Run and typing "services.msc" without the quotes.  In the window that opens, find the service that the error message references.  It will usually have a status of "Stopping." 
    -Double-click on the service to open the service's properties window as seen below.
    -Try clicking Stop to stop the service.  If this does not stop the service, set the service's type to Manualand restart the computer.  It is safe to set the service to Manual because it will be started manually if it needs to run.  After the restart, the service will not start automatically and you will be able to install or uninstall your software as necessary.
    As for the devices not being visible have you downloaded the NI DAQmx drivers correctly(after installing LabVIEW).
    Regards,
    Mark 
    Applications Engineer Intern
    National Instruments UK and Ireland

  • How can install Bar file on device

    my bb z10 is stuck after update.. it blicks red light in a pattern, 1 blink, then 3 then 2... i was hoping to install os thru bar file as i hv already tried using link, but phn is still stuck.. can i install on such a phn os thru bar file? if yes, then how??

    This might help you:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-BB10-OS-Using-Sach... 
    Cheers.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • HT1338 how to install hp jet 1000 printer software on my mac

    how i can i install hp jet 1000 printer software, connect it to my mac book air and get it to operate?

    If your printer were AirPrint compatible, this would explain how to do it:
    AirPrint basics
    But I believe your printer is not one of those listed in the article as AirPrint compatible.  So you'll have to visit HP's website for help.

  • How to Install BlackBerry 4.5 System Software in the Blackberry 8310?

    I followed the instructions to download and install the BlackBerry Desktop Manager 4.5 and the BlackBerry Device Software 4.5 for BlackBerry 8310. This was done correctly and the installation was successful. 
    When I opened the Desktop Manager to install the Device Software on the phone, there was no software to install. 
    It was installed on my computer but could not be installed on the phone. The software appears in the list of programs installed on the  installation and uninstallation manager in the control panel of the computer, but does not appear on the Desktop Manager to be installed.
    What steps should I follow?
    Solved!
    Go to Solution.

    Close Desktop Manager.
    Go to folder: C:\Program Files\Common Files\Research In Motion\Apploader
    and delete Vendor.xml file
    Now, connect the device and launch BB Desktop Manager.

  • [SOLVED] how to install ArchLinux on a simple software raid 0

    I have two 256GB disks and I want them to be in raid 0.
    I tried following this tutorial: https://wiki.archlinux.org/index.php/In … AID_or_LVM
    but this tutorial has the added complication of LVM and raid 1 which I don't need.
    I made 3 partitions on each of the disks:
    sda1 - 100MB for /boot
    sda2 - 2048MB for swap
    sda3 - raid 0 md0
    sdb1 - unused
    sdb2 - 2048 for swap
    sdb3 - raid 0 md0 for /
    I can assemble and format the sda1(ext4), sda2(swap), sdb2(swap)  md0 (ext4) and install all the packages
    I also configured mdadm.conf by Alt F2 at the installer and executing: mdadm --examine --scan > /mnt/etc/mdadm.conf
    and added mdadm hook to the HOOKS list in /etc/mkinitcpio.conf (before 'filesystems')
    configured the boot with grub outside of the installer as indicated in the tutorial
    But when I boot I get:
    md0: unknown partition table
    Error: Unable to determine the file system of /dev/sda3
    please help.
    Last edited by 99Percent (2011-06-29 20:21:52)

    fyi this is how I finally set up my simple 2 drive raid 0:
    1. Create a bootable USB ArchLinux with UNetBootin
    2. Boot with the USB
    3. # /arch/setup
    3. Select source: internet (highly recommended because i found out UNetBootin sources are not 100% reliable though not necessarily so, IOW just to be sure)
    3. partition the two drives with 100mb for /boot and 100mb for swap (setup requires it - I have 8GB memory, I decided I don't need much swap space) and the rest of both sda and sdb which will make your raid 0.
    4. ALT F2 to another terminal and create the the raid like this:
    # modprobe raid0 (not sure if this is actually necessary)
    # mdadm --create /dev/md0 --level=0 --raid-devices=2 /dev/sda2 /dev/sdb2
    5. go back to the setup screen with CTRL-ALT-F1
    6. go to Prepare Hard Drives>Manually configure block devices, filesystems and mountpoints. Add the /boot (ext2) for sda1 swap for sdb1 and desired filesystem for md0 (I chose reiserfs). Ignore the rest of the devices.
    7. Select packages. Add the base-devel just in case, but nothing else and install packages
    8. ALT F2 again to the  terminal and run:
    # mdamd --examine --scan > /mnt/etc/mdadm.conf
    (this will configure the mdadm.conf to use your raid as created)
    9. go back to the setup screen again with CTRL-ALT-F1
    10. Select configure system
    11. Edit /etc/rc.conf adding: raid0 to MODULES= like this:
    MODULES=(raid0)
    again not sure if necessary but it works for me
    12. Edit /etc/mkinitcpio.conf adding dm_mod to the MODULES= like this:
    MODULES="dm_mod"
    13. also add to /etc/mkinitcpio.conf HOOKS= mdadm but before filesystems in my case it went like this:
    HOOKS="base udev autodetect pata scsi sata mdadm filesystems"
    14. I went ahead and uncommented a few mirrors in the mirrorlist file so I wouldn't have to deal with that later (and maybe it helps on the way).
    15. Also set a root password. Not sure if it is even necessary but maybe some components require it.
    16, Go to configure bootloader and select Grub
    17. When asked "Do you have your system installed on software raid? answer Yes
    18. When asked to edit the menu.lst file don't edit anything, just exit
    19. When asked "Do you want to install grub to the MBR of each harddisk from your boot array? answer Yes
    20. You will get "Error: Missing/Invalid root device:" and "GRUB was NOT successfully installed." Ignore those messages.
    21. Exit the install
    22. remove the USB stick and:
    # reboot
    23. the boot will fail and you will get a grub> prompt type the following commands:
    grub> root (hd0,0)
    grub> setup (hd0)
    grub> reboot
    Thats it!
    Last edited by 99Percent (2011-06-28 18:51:59)

  • How to install and run USB device application without NI-VISA environment?

    Hi everyone:
          I develop a LabWindows/CVI8.5 application that uses a driver for a USB device created using the NI-VISA 4.6.2. The application is ok when the NI-VISA  environment is installed in PC. But the  NI-VISA 4.6.2 is too big(326M).  Can be the USB device successfully installed in non-development machine without NI-VISA 4.6.2?  Just need some files, such as INF, NiViUsbK.sys and ni-visa32.dll, the device will be installed and run.   If the way is feasible, please tell me how to do. Which files are necessary to the device is installed in non-development machine without NI-VISA 4.6.2 environment? It is so big, I need a minimum NI-VISA system.
          I need your help.

    Personally I use the open source LibUSB. It links without difficulty with
    CVI. And it works both on Linux and Windows, which is a big plus. Haven't
    touched it in 2 years though.
    Guillaume Dargaud
    http://www.gdargaud.net/

  • How can i undo the latest ios7 software update for my iphone4? It completely screwed up my phone!

    I updated my iPhone 4 a few days ago to the latest operating system, iOS7. I've always proceed with the operating system updates because I assumed there were security fixes included as well as other fixes that were supposed to make the system run better. I haven't had any significant problems with updates in the past, except for some minor differences in appearance that didn't bother me.  This time but the update appears to have completely screwed up my phone.
    My first complaint is, where the **** did all of my apps go?? I paid for them, and now they're gone. Are they hiding in the iCloud? I had over 3 screens of apps, and now I've only got 1 screen.
    My second complaint is, what was wrong with the appearance of the interface and icons in the previous version? The new system has gone with opaque pastel-colered icons that, frankly, I don't like as much as the icons in the previous system.  And why does there have to be a gray band on the bottom row of icons?
    My third complaint is everthing else on the phone is screwed up. Nothing works like it did before. Most of the photos I had on my phone have disappeared (iCloud??) Granted, my complaints about the appearance may seem trivial, but this is really annoying.
    Can I reverse the iOS7 "downgrade" and go back to the good old days with the previous version when everything worked just fine and I was able to access all of my apps?

    You might want to check out these two threads:
    https://discussions.apple.com/thread/5325838?tstart=0
    https://discussions.apple.com/thread/5369545?tstart=200
    This topic has been discussed ad nauseum, they might give you some ideas on how to deal with the changes.  Be sure to leave Apple your feedback on the matter: http://www.apple.com/feedback/  Good luck!

  • How to install Apple's Rosetta emulation software?

    Sigma Chess is a legacy PowerPC application and therefore needs Apple’s Rosetta emulation software in order to run on Intel based Macs. This is pre- installed on Mac OS X 10.5 and earlier, but must be installed manually on the new Mac OS X 10.6. Please guide me

    Chessmaster 9000 (PPC) running in Snow Leopard Server installed in Parallels for use in Lion, Mt. Lion and Mavericks:
                                  [click on image to enlarge]
    More information here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • How to install and configure latest xampp, php, Mysql, apache server, and configure it with dreamvie

    Working on my next project for the tech blog Techmozilla I am trying to make php to work with Apache. . i surfed for the procedures and finally i was asked to do the below mentioned operation .. but i am unable to understand it can anyone please help me .I am using Windows XP
    # Add the following 3 lines to your httpd.conf file. You can put them anywhere in the file but maybe it makes sense to put them after the other LoadModule section.
    LoadModule php5_module "d:/Program Files/php/php5apache2_2.dll"
    AddType application/x-httpd-php .php
    PHPIniDir "D:\Program Files\php"
    Is there any other link which helps to install PHP,Apache and MySql. Please help me. Thank you in advance

    This forum is for helping people who are trying to download and install Adobe software products.  You need to find an information resource suitable to the task you are undertaking, most probably provided by whomever provided the resource(s) you are trying to install.

  • Just upgraded to the latest device software and having problems

    Hello Everyone,
    I received an email from RIM telling me that I needed to upgrade my phone's (Blackberry Curve 8310) software. I went through the process and now all of my contacts are re-arranged. Before the upgrade I had all of my contacts listed as such: Name of contact; Mobile No.; Home No. etc... Now there is a new contact for each additional number that I have for each contact. Has anyone else experienced this? Anyone know a fix?
    Also, my internet browser is gone. I don't have a goto button or anything. Bookmarks are gone... (*slight cursing*). Can anyone help me get my phone back to where it was prior to the update?
    Thanks
    TexSbennett

    please read this article from the public knowledge base :
    http://www.blackberry.com/btsc/KB03710
    Browser icon does not appear on the BlackBerry smartphone
    The upgrade forgot to put the browser back. it is cause 5.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Bug on V4.51!!!How to install old V of my software...

    I would like to install V3.70 or V4.52?! I dont like new V4.91! There is a bug at inciming call. When is video clip set as ringtone people who are calling me they dont hear me, bat I can hear them! Can somebody help me to fix this bag?

    Downgrading is not possible, if you try you will kill the handset.
    First use the search to see if your question has already been answered...
    Secondly I will not knowingly assist in breaking the forum rules.
    My information is always changing, what I post at the time is usually true.

  • HOW CAN I DOWNLOAD THE LATEST IPHONE SOFTWARE

    hello..i cannot restore my iphone 3gs ....error 1015 keeps coming up

    Type "1015" into the search bar at the top of this screen by "Support".

Maybe you are looking for