How to install a external floppy disk drive?

I insert a external USB floppy drive in my Macbook Pro, but no responce! Pls help!

Disconnect all USB devices except the floppy drive. From the menu bar, select Apple menu > About This Mac. The System Profiler application will open. Look under Hardware > USB for an entry representing the drive. If you're not sure, post the output. If the drive is not listed, either it's dead or something is wrong with the cable or your USB port. You can distinguish those possibilities by testing the drive with another computer and testing another device with the same USB port and cable.
If the drive is listed in System Profiler, but doesn't work, then it may be faulty or incompatible.

Similar Messages

External floppy disk drive

I have an HP F1059C External Floppy Disk Drive by TEAC that came with a (really) old HP laptop. I have some old research saved to floppy disks I need to access. Is there a cable that will convert my External drive to a USP port on my present HP laptop with Windows 8? Do I need a new driver?
Thanks
Oxford Designer

Thank you Dean Huffy. Yes, I recall it was an omnibook. I loved the compactness of the thing. And it had enough heft one could throw it like a brick at someone's head if they made fun of it. Your advice alone is worth the $30 and elegant in its simplicty.
If you have the patience, I would add another permutation to my situation. After the Omnibook's monitor went dark the files were tranferred via it's floppy drive to its desktop successor, for which I ordered a redundant floppy drive for that purpose. There it rested, with some updates, but unbidden for the past five years until the desktop crashed and I replaced it with the present laptop. I took the two units to my local computer repair person who neatly transferred most if not all the contents of the former to the latter, EXCEPT THAT, when I try to open the one, much coveted file, I get a message "cannot convert password protected documents". Okay, so had so much regard for the file I put a password on it, but I can't even get to a point where I can enter a password; and following the Windows advice to "Open and Repair" seems to have no impact.
The bottom line is, I am most grateful for your advice on how to recover the file as of 2001 from an old back-up floppy , but would be even more grateful if I can recover the file through its 2009 updates now on my harddrive (and perhaps a back-up CD.)
Thank you, again.
Hank

How to reinitialize an external hard disk drive which serves for Time Machine?

How to reinitialize an external hard disk drive which serves for Time Machine?
Thanks for your answer.

Everything you need to know about initializing (formatting) is here.
http://pondini.org/OSX/DU1.html
Lots of useful information on TM is here in the same place.
http://pondini.org/OSX/Home.html

Where can I buy an external floppy disk drive for my Macbook?

where can I buy an external floppy disk drive for my Macbook?

You can find them on eBay http://www.ebay.com/sch/i.html?_odkw=usb+floppy+drive&_osacat=0&_from=R40&_trksi d=p2045573.m570.l1311.R1.TR2.TRC1.A0.Xusb+floppy+drive+for+mac&_nkw=usb+floppy+d rive+mac&_sacat=0

External floppy disk drives for the new iMac?

I'm trying to move a whole slew of files I created on a Macintosh from a longtime back--the original Mac--and they are all saved on floppy disks. I recently bought a Sony MPF88E not knowing it didn't work with the new Leopard OS. Are there any external floppy drives out there that do work with the new OS?

Hello and Welcome to Apple Discussions.
I just dug out my +TEAC FD-05PUB+ (which I originally bought for an iMac DV running OS 9.0.4!). It works fine* on my Aluminium Intel iMac 2.8GHz.
I'm not sure why the Sony wouldn't work. Does it appear in System Profiler and/or Disk Utility?
mrtotes
* by fine, I mean normal, but I'd forgotten how bad floppy disks are...

How to password protect external hard disk drives

Hi All,
I have purchased and external USB port hard disk. The problem with it is anyone just plug it to thier computers USB port and use it as we use our windows explorer to browse the filesystem. However whenever I plug to my computers USB port it should prompt me for a password and once authenticated it should allow me to browse the filesystem of my external hard disk. How can I achieve this using java ?
Thanks & Regards,
Kumar.

If you really want this to work properly, you will have to write a DLL for Windows that will intercept the appropriate filesystem call and prompt you for a password. Otherwise, another option would be:
Create a standalone Java application that will read/write from the hard drive
Use Java Cryptography extension for all read/writes to the hard drive (encrypt onto hard drive, decrypt into memory or internal hard drive)
Have your sign-on required to use the Java application (and hence, decrypt the contents of the drive)
Use passphrase-based symmetric encryption so that the password can be the actual key for the encryption/decryption (or if you want, have that key unlock a larger symmetric key also encrypted on the drive)- Saish
"My karma ran over your dogma." - Anon

Floppy Disk Drive for Mavericks

Hello
Does anyone know of an FDD for a mavericks mac? I would like to create boot disks for an old mac. Is this a good method to consider? I am not sure how else to go about this. If there is an alternative, whatever it might be, please let me know.
I apologise for posting here but this relates to older machines in a way.
Thanks in advance.

The original system for a PowerBook 2400c/180 was 7.6.1. Other supported systems (according to Apple's technical specifications) were 8, 8.1, 8.5, 8.6 and 9. You would need to purchase an appropriate Apple system CD. Ensure that it is a retail disc (for all models), not a disc for a certain (other) machine.
You can use one of the Apple CD-ROM drives above, providing that you have the proper HDI-30 cable. See the manual for details about connecting SCSI devices and about booting from a CD.
If necessary, and if the already installed operating system is working (and you can navigate the Japanese menus), you should at least be able to create a Disk Tools PPC floppy on the PowerBook. Use the Disk Copy 6.3.3 program (the Make a Floppy command under the Utilities menu) for this. I assume that you have the external floppy disk drive for the PowerBook.
www.info.apple.com/support/oldersoftwarelist.html
http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English -North_American/Macintosh/System/Mac_OS_8.1_Update/Disk_Tools_PPC.img.bin
http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English -North_American/Macintosh/Utilities/Disk_Copy/Disk_Copy_6.3.3.smi.bin
One may also want to try to modify a Disk Tools PPC to hold CD-ROM software, thus allowing a CD to be read when the computer is running from the floppy disk system.
Additionally, since the computer in question has PC Card slots, an inexpensive PC Card adapter for CompactFlash and a CompactFlash memory card can be very useful for file transfers. In certain PowerBook models, such a CompactFlash card (reformatted to Mac) can even act as a startup disk (if it has an appropriate system folder).
Jan

External Floppy Disk Drivers

Hi all, Can anyone tell me if I buy and external floppy disk drive - compatible
with Mac... will it transfer photos to my Mac if the floppy were created on
a Windows computer?
-or-
If I put the floppy disk photos on a CD-R using a Windows computer... will
the photos on the CD transfer to /or/ be readable by my Mac computer?
-or-
Am I just wasting my time with this and I should just throw the windows created floppy disks away. I no longer own a windows computer (it died)
and all I have is my new iBook. But, I would really like to figure out how
to trasfer the photos created on my deceased Windows computer and
stored on floppy disks over to my Mac computer. I have tried one (supposedly) Mac compatible external floopy disk drive... when I loaded
the (Windows created) floppy disk, my Mac was not able to view the
photos.
Thanks in advance for your help with this! ~~ HoundDogg
iBook G4 // PowerBook6,7 Mac OS X (10.4.7)

You will probably be able to use an external floppy drive to transfer the photos to the Mac, and you can do this with a CD-R. Some floppy disk formats are not supported on all platforms, and 800KB Mac floppies cannot be used in an USB floppy drive.
(15164)

How to install a floppy disk drive

I have an HP Pavilion 20-b150 All in one desktop PC running Windows 8. I want to use some old floppy discs from my old XP computer. I have bought an external floppy disc drive which was recommended as using Windows 8 but when I plug it into a USB socket it just sits there and nothing happens. It came with instructions or installation disc. What am I doing wrong or is the drive a dud? Please tell me how to install it.
Thank you

Hi:
This is the one I have.
It came with my nc6400 business notebook. Works like a champ.
http://www.ebay.com/itm/HP-359098-003-391091-001-DC361B-USB-1-44MB-EXTERNAL-DISKETTE-DRIVE-/22118599...

Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

How to stream audio/video files on bb playbook and create different play lists from another pc and/or external hard disk drive connected with a share router

hi guys
i wish to use my external hard disk drive (1tb) connected with a belkin share router as main storage drive and stream audio/ video and other files on bb playbook through wifi.
also wish to create different playlists directly on playbook.
please tell me guys how can I do it.
thank you in advance

Try this...
http://forums.crackberry.com/blackberry-playbook-f222/how-stream-video-music-more-your-mac-pc-your-p...

Is it possible to boot or Time Machine restore from an external Thunderbolt disk drive?

(There are several questions - search for "?".)
I purchased a Seagate Backup Plus for Mac Desktop Drive 3 TByte with default USB 3.0 interface, and also acquired the Seagate Thunderbolt Adapter for Backup Plus Desktop Drives and Thunderbolt cable.
I do a redundant backup to the Seagate Drive using both Carbon Copy Cloner (nightly) and Time Machine (hourly) using its Thunderbolt adapter. BTW: One never knows when Time Machine will choke - see discussion titled, "UPDATED: Serious Time Machine bug on Mountain Lion", which I had; Rest In Peace Pondini (James Lewis Pond).
Booting from the external Seagate Backup Plus via Thunderbolt inteface from System Preferences -> Startup Disk:
I select the Time Machine OS X, 10.8.5 Startup Disk (Thunderbolt attached drive), click Restart, confirm my choice, the computer reboots, however, it reboots from the internal Macintosh HD OS X, 10.8.5, NOT the selected external Thunderbolt drive. The SSD drive was used as the Startup Drive, not the selected external Time Machine volume as indicated by the display free disk space command (df(1)) and seeing that the Macintosh HD OS X, 10.8.5 volume is mounted as root. That is very deceptive in that both the internal and external drives will appear in the same manner from a GUI point of view! OS X doesn't even inform me that it did not boot off the selected volume. This is the first half of the problem, that is, Is it possible to boot from an external Thunderbolt disk drive? In my case, the answer is deceptively No. Can anybody else boot off a Thuderbolt attached disk drive? Note that if I remove the Thunderbolt adapter, and attach the drive via its USB 3.0 cable, the MBP boots off the external Seagate Backup Plus just fine, as is expected.
Booting from the external Seagate Backup Plus via Thunderbolt inteface from boot-time "Option - Select startup disk" method:
When I restart the MBP using the startup Option key to select the startup volume, the externally connected Seagate drive ONLY SHOWS UP if it is attached with the USB 3.0 cable, not when it is attached with via the Thunderbolt interface. Can anyone else boot off a Thunderbolt drive with the startup Option key sequence? At least the MBP doesn't deceive me in this case - I know right away that the external Thunderbolt drive is not an option when connected as such.
Time Machine restore from the external Seagate Backup plus via Thunderbolt interface from the "command-R - Recovery Parition" method:
After booting from the recovery partition, I attempt to perform a Time Machine restore from the Thunderbolt connected Seagate Backup drive. When Time Machine attempts to present me with a viable backup Time Machine volume, the external Thunderbolt drive is never offered as an option. So I switch the Time Machine volume to use its USB 3.0 interface, and then Time Machine displays that drive as an option, and the MBP proceeds with the restoration as expected. The interesting thing to note is that while booted in the recovery partition via the Thuderbolt cable, the MBP Disk Utility may be selected, and the Thunderbolt attached drive may be operated on just fine. Can anybody else restore their MBP using Time Machine and the Recovery Partition via the Thunderbolt interface?
This is also a big problem for me in that I am forced to restore my MBP via Carbon Copy Cloner using the USB 3.0 interface, because I cannot even boot off that volume's Thunderbolt interface. Of course, the option may be that I could use yet another eternal USB 3.0 drive, boot from it, and then use Carbon Copy Cloner to restore the Macintosh HD via the aforementioned drive connected by a Thunderbolt cable, but that is less than ideal and not elegant, so I'm not going there.
Another side issue is that the commercially available program, TechTool Pro 7's eDrive, which I installed on the Time Machine volume, will not boot off that eDrive as advertised, but I won't got through those steps here, because that would be beyond the scope of this issue, however, I must say, It does not work either when the Time Machine volume is connected via the Thunderbolt interface, but works just fine when connected via the USB 3.0 interface.

If this helps anybody else make a decision about whether to consider Apple because of Apple's superior customer service:
Apple sells this entire line of drives right in their store, from 1TB to 4TB. I spent 1 and 1/2 hours, yesterday, confirming that the 3TB model IS NOT 100% Thunderbolt compliant. A MBP cannot boot, nor can it Time Machine restore from this drive, though EVERYTHING about the drive is normal.
Apple's South Coast Plaza store management had at least two responses to me personally about how to proceed:
1. Buy a different drive from another drive manufacturer, and to attempt to return the drive to COSTCO. A lead genius suggested going with GTech drives, for instance.
2. Wait for Seagate to fix their problem.
I told Apple management in the store that the drive is advertised as Mac Compatible (see picture) and that it is advertised as being a Thunderbolt drive (see picture). I pressed management that my purchasing decsion to get the best possible MBP Retina was based on the availablity of Inexpensive Devises (raID), and that not having this complete compatibility is a show-stopper for my needs, and that I wanted a refund. Their response? They needed to talk with "Merchendising" to see if they are on or off the hook for these kind of 3rd party assertions, and would get back to me.
I am not holding my breath.
Note: I do not hold this against the Geniuses that helped me, nor against the management I've dealt with, nor the upper level engineers that I've corresponded with through Apple Care - their problem solving skills were helpful - although I could have arrived at similar conclusions given enough $$$. (For instance, try a Lacie TB drive and see if that works - we did, and it did not work. Or, we have a different TB cable and a different TB adapter, let's try those - we did, and it did not work.) I blame myself for not doing enough homework before going with Apple's solutions.

Solaris 8 Floppy Disk Drive Problem

Hi to all!, I need help with Solaris 8 10/00 Intel. I�ve installed it and everything works fine, but I cant make the system to recognize the floppy disk drive, everytime I do a "volcheck", it just ignores it. Inside CDE happens the same thing, when I do check the floppy, nothing happens. Any clue?. I�m using an AMD Athlon 700, with VIA KT133 chipset. Thank a lot!.

Try "ftp" + your email address. (but "anonymous" works, too).
Perhaps a typo or there was some other temporary problem with the
web site.
The K7M boards have different bios release numbers, it seems the
first bios release had a revision number of 1007:
ftp://ftp.asus.com.tw/pub/ASUS/mb/slota/k7m
Do you have to boot using the DCA floppy for some specific reason?
(for example to install using the >32GB ide-drive patch; network install
and no local cdrom drive; El-Torito CDROM boot does not work at all)?
Or do you have the system already installed by booting from CDROM,
and you just want to get usable floppy/serial/parallel ports under
solaris 8? In that case have a look at http://www.tools.de/solaris/via/. I've written a small driver that attaches to the VIA
686A SouthBridge PCI/ISA device and it re-enables the Super-I/O
controller on that chip. The Super-I/O chip is disabled due to the
solaris ACPI bug and is the reason all these on-board devices do
not work under solaris 8. According to
http://www.asus.com.tw/products/Motherboard/SlotA/k7m/spec.html, the K7M uses the same SouthBridge chip, so my driver should work for
this board, too.

I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 Mac with MacOS X 10.4 operating system. What will work for me?

I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 with Mac OS X 10.4 operating system. What external drive will for for me?

Hi,
Providing that the old 3.5" floppies are 1.44 MB HD disks, you should be able to use a USB floppy drive.
However, if the disks are 2DD/DSDD in the 800K Mac format a USB drive is not going to work. In this case you would need a suitable semi-old Macintosh computer with a built-in floppy drive as an intermediary.
Jan

Tiger doesn't install on external firewire disk (partition)

hi, i've got a Lacie Porche 250GB firewire drive, partitioned in two parts, and i want to install tiger on the first 50GB partition, but the installer give me an error about the destination: "You cannot install Mac OS X on this volume. Mac OS X cannot start up from this volume."
i'm trying to do this with an ibook G4 and the standard Tiger DVD Install.
the external firewire disk is formatted in HFS+
please help me
iMac Intel\iBook G4 Mac OS X (10.4.8)

A boot disk for the Intel Macs needs to have a GUID Partition Table, the G4 needs the "Apple Partition Map". If you formatted the drive on your Intel Mac, you may need to repartition for the G4. In the "Partition" tab in Disk Utility, use the "Options..." button to choose the partitioning. Backup any data on the drive that you need, first.

How to install a external floppy disk drive?

Similar Messages

Maybe you are looking for