How to install a HP Laser Jet 4 Plus

I have successfully installed my HP PhotoSmart 7520 but I have a workhorse printer that I would like hooked up to my new HP Notebook also......it is a Newlett Packard Laser Jet 4 Plus.  It is not listed as a choice and I would really like to use it. Any help would be appreciated. Thank you.

Any of the laserjet models that have a front panel (touchscreen) and the option to print a Supplies Status page can provide this information. The Supplies Status page shows how many pages each of the current toner bins have printed since installation.
Make sure to check that the printer has a Supplies Status page in the Reports submenu of the Setup menu. Hope this helps.
example: the Laserjet Pro 200 M276nw has this feature.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

  • How to check in hp laser jet 1020 Plus , how many printout in one toner. cartridge

    I change again-by-again in HP Laser 1020Plus toner but not recevied any information like how many printout this  cartridge . please give me any solution.

    Any of the laserjet models that have a front panel (touchscreen) and the option to print a Supplies Status page can provide this information. The Supplies Status page shows how many pages each of the current toner bins have printed since installation.
    Make sure to check that the printer has a Supplies Status page in the Reports submenu of the Setup menu. Hope this helps.
    example: the Laserjet Pro 200 M276nw has this feature.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • How do i install a hp laser jet 4l printer on windows7

    how do i install a hp laser jet 4l printer on windows7 Where do I get the drivers

    The driver is delivered through Windows Update as described here.  
    You could also use the Windows 7 driver finder tool at http://www.hp.com/go/tools.
    If you do not have a parallel port on your Windows 7 machine you may need a USB-parallel converter cable.  The models mentioned in the posts tagged here have been verified by users to work in Windows 7.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Cannot install my HP laser jet 1225n.

    Cannot install my HP laser jet 1225n. The software installs but does not show in print and scan and cannot be added in print and scan. Message received as follows.Can't install the software for the Hewlett-Packard HP LaserJet CP1525N because it is not currently available from the Software Update server.
    Pleae help

    Hi,
    Download and install teh Full Feature Software from HP below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-107388- 1&cc=emea_middle_east&dlc=en&lc=en&os=219&product=4052977&sw_lang=
    After completing the installation be sure to reboot your Mac, then click the Apple icon and select Software Update, be sure to select any listed HP Update to ensure you use the latest drivers.
    Please let me know of any problem,
    Shlomi

  • I have a Laser Jet 4 plus C2037A and purchased a new computer with Windows 8.

    I have a HP Laser Jet 4 plus   C2037A.  Bought a new notebook with Windows 8.  Had Windows XP.  I do not seem to be able to load it and have not found a driver yet.  Anyone else having this problem?

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Need driver for hp laser jet 4 plus with windows 7

    need driver for hp laser jet 4 plus with windows 7

    Hi,
    A friend of mine uses USB-Parallel cable, he was saying it's ok
    Good luck,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to print envelopes hp laser jet pro mfp m225dw

    Can you please advise as to how I can print invitation style (4 3/8 x 5 2/4) envelopes on the Laser Jet Pro MFP M225dw?  Also, if my template is set up for a horizontal mail merge configuration, how should the envelope be inserted into the printer?

    Hey @Shaggs,
    I would like to assist you today with printing on envelopes with your HP LaserJet Pro MFP M225dw.
    Please refer to the document below for step by step instructions on how to load envelopes in your printers paper tray:
    Loading Plain Paper and Envelopes
    Once you have your envelope loaded properly, open up the program that you want to print envelopes from. Because Word seems to be the standard program that people print envelopes from I'm going to provide you with the envelope printing instructions for that specific program. Should these steps not work for you, be sure to respond to this post with your Operating System and the program that you're printing from.
    What's my OS?
    How to Print Envelopes from Word:
    1. Open Word and click on Mailings at the top
    2. Select 'Envelopes' from the top left hand side
    3. An Envelopes and Labels page should now open. Enter your Delivery and Return Addresses.
    4. Select 'Options' on the bottom right hand side.
    5. Under the 'Envelope Options' tab ensure that your Envelope size is appropriately selected.
    6. Select the 'Printing Options' tab at the top. You now need to select the appropriate Feed Method for your product.
    7. Make sure that you choose the 'Face up' option.
    8. Also ensure that 'Clockwise Rotation' is not selected.
    9. Hit 'OK' and 'print'
    Here is a video for additional instruction:
    Please respond to the this post with the result of your envelope printing. Thanks for reaching out to the HP Support Forums. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • How can I get my Laser Jet M2727 back online?

    For the past several days my printer has been going offline. 
    Once, re-booting solved it.
    Once, switching it on and off and on solved it.
    I have checked connections, I think.
    The screen is blank.

    What printer?  What operating system?  What router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Please tell me how to install ThermalRight SI-120 on Diamond Plus

    Hi!
    I bought this cooler and I'm afraid of installing it.
    I mounted the special retention module and after that I tried to install the cooler without a CPU installed on the mobo. I pushed it as hard as I considered that it won't damage the mobo, but I didn't managed to install it and I stopped, being afraid of causing damage to the mobo.
    If there is someone that has this cooler installed (preferably on Diamond Plus), please help me with some advice.
    I don't want to mess things up.
    How is it better to install? With the heat pipes facing the memory, or facing the back side of the computer case?
    Thank you very much!
    Your help is greatly appreciated!:)

    Quote from: adyp2003 on 18-May-06, 08:23:57
    With a bit of attention and a little bit more force, I managed to install it.
    Boy, that was hard...
    That's what I call a big hug (between a cooler and a CPU (inexistent for now :P). 
    Yeah... I have an XP90 & I understand that a 120 has a similar mount.
    They are a b!tch! But you don't have to worry about 'em coming off by themselves!
    For my XP90, I find that it is best to hold the whole thing firmly down with the palm of your hand & engage the clips. Don't release the pressure until you are absolutely sure that the clips are in.
    If you have to remove it, make sure that it's firmly held down before popping off the clips or the thing will snap up to the side with enough energy to forcably remove the CPU from its locked socket. As the HS fits to the top of the CPU with enough pressure to suction itself to it with the thermal compound in place.
    Not good!
    You can remove it safely by doing it immediately after shutting down the system - the paste will be softer. After unhooking the clips, twist it gently from side to side until it comes loose.

  • Laser Jet 4M plus with Windows &?

    So will this work?  I seem to have downloaded a drive for the 4M+ for Windows 7, but have questions about whether it will really work or not???   Where do I get a cable that is USB to parallel or whatever that is that goes into the printer?  I got a new laptop and never thought about whether this old soldier that still works great after 16 years would work with it or not.  Any help greatly appreciated. 
    thanks.

    if you can get a jetdirect card for your printer, then you can connect it through the lan as a network printer
    Although I am an HP employee, I am speaking for myself and not for HP.

  • I can not install my wireless P2015 dn Laser Jet Printer with the MS 7 software.

    For three years the P2015 worked "wireless"on my Lenovo T60p with microsoft XP.  It ran through my wireless router and printed fine. 
    I just updates the software to MS 7 (32 bits, 2007) and the printer will not run off the router.  I hooked the printer up directly by cord, downloaded the printer drivers off the MS 7 software and it worked fine while attached.  The router works fine with MS 7 for the internet and the email on my computer and the two other computers (still MS XP) on the router.
    I tried installing the 2015nd Laser Jet using the CD driver it came with originally and I come to a screen "searching for available printers" and there is nothing in the box below to choose from (blank screen).  It goes though a "searching for available printers" routine and finally the message come up "No printers were found".  This same thing occurs when I try downloading from the HP Web site drivers.  I get the same screens and the same results. 
    What do I need to do?  (I am a beginning level of computer knowledge)
    This question was solved.
    View Solution.

    Hi Edronenburg,
    Even though the software installer can not find your printer automatically, you can still install the printer if you know the IP address.
    If you press and hold the "Go" button on the control panel for several seconds (until the lights begin flashing) the config page will print. On this page you can find the IP address of the printer that has been assigned by the router. During the software install, instead of having the installer automatically search for the printer, choose to manually enter the IP address. This should allow the software install to complete successfully.
    (Although I am an HP employee, I am speaking for myself and not for HP.)

  • HP Laser Jet 1536dnf MFP

    Why does my computer recognize my HP Laser Jet 1536dnf MFP as Universal Printing PLC6?  And how can I install the HP Laser Jet 1536dnf MFP if it s not on any list, I don't have disc and is recognized as the wrong MF printer?

    Hi ballard,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand the printer name is showing the Universal Printing PLC6 driver and not the Laserjet M1536.
    I will be happy to help you.
    During the install it pulled the Universal driver instead of the Laserjet driver.
    Did you download and install the drivers?
    Here is the URL for the drivers if you haven't already installed them.
    HP LaserJet Pro M1536dnf Multifunction Printer Drivers. Select the operating system and click next.
    Click on Driver - Product Installation Software and download the drivers.
    Delete the PCL driver and install the download.
    We can see if we can update the driver through the device manager if the full software was already installed from the download to get the right driver installed.
    How do I get into Windows Device Manager?
    Click on View and select show hidden devices.
    Look for the printer entry and right click and select update the driver.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected?
    Please let me know the results if you are still having issues.
    Thank you for posting on the HP Forums.
    Have a great weekend!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I-cannot-print-with-HP-Laser-Jet-Professional-P-1102w/m-p/489258

    How can I initialize my Laser Jet Professiional P 1102w printer?

    Frielinghaus
    Welcome to the HP Community Forum.
    Frielinghaus wrote:
    How can I initialize my Laser Jet Professiional P 1102w printer?
    Perhaps I do not understand your inquiry?
    Is the printer exhibiting a Hardware issue?
    If yes, the following might be useful:
    The Printer Will Not Turn On or Respond When the Power Button or Power Switch is Pressed
    ============================================================================
    If the printer is OK and you just need to install printer software and "get things going":
    You can find the Full Feature Software for your printer here for several flavors of Windows, Mac OS.  There are apparently even drivers for Linux:  HP LaserJet Pro P1102w Printer
    On your printer Support Pages, you can also find links to your User Guides, How-to Pages, Troubleshooting, and other interesting bits.
    Click the Kudos Thumbs-Up to show you appreciate the help.
    Click Accept as Solution when the Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Printer Laser Jet 4L driver installation

    I still can not install the Printer Laser Jet 4L with serial ports on windows XP. Is any one have this drivers?

    @EdmondH 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • How to install hp laser jet 1018 on windows 7 x64

    ok thanks
    how to instal hp laserjet on computer windows 7 (64-bit)?

    Have you already installed the driver/software and its not working or is this the first time you are installing?
    For the first time installing...
    1. Close any software programs running on your computer.
    2. Click on the Download button ( LJ1018_1020_1022_Full_Solution.exe ) and save the file to your hard disk.
    3. Double click on the downloaded file. This will extract all the driver files into a directory on your hard drive. The default directory these files are extracted to will have a similar name to the printer model.
    4. Follow the on-screen instructions to proceed installation.
    I usually have the printer disconnected from the computer and connect the usb cord when prompted by the installer.
    Is this what you are looking for?
    Let me know how it turns out.

Maybe you are looking for