How to install a lean kde system?

hi all
by lean i mean a minimum kde desktop without too many kde softwares installed
thx

toad wrote:
fuscia wrote:you could also go the kdebase route.
What's that then? I installed vanilla, I think the install took more than 1GB
kdebase comes with basic kde apps, like konqueror, dolphin and konsole, etc.. in order to use the kde desktop with that, you'd need to install kdebase-workspace, as well. this ends up being about a 500mb installation. i usually use openbox, so i already have things like gimp and vlc installed and i prefer cplay to any of the major audio players.

Similar Messages

How to install JCO in linux system?

How to install JCO in linux system?Thanks.

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost above discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

How to install Linux on UEFI systems where GRUB fail to install?

A few of us are asking:
How to install Linux on UEFI systems where GRUB fail to install? Because after installing Linux, my MBR is messed up, and I get a "no operating system found" at system startup.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.
Solved!
Go to Solution.

Hi again,
I would like to answer to another question, just in case:
Question: Can I dual boot Win7 and Linux on a UEFI capable bios?
Answer: Yes you can. If your HDD is formatted in MBR partition table (or msdos) than you can install first windows 7 and than the distro of your choice. BUT, careful, if you install windows from a DVD media it will convert your HDD in GPT partition table and dual boot will be almost impossible... (or will give you a lot of headache) to avoid this, dump the win7 iso to an usb using Windows 7 USB/DVD Download Tool. Installing from USB will not change the hdd in GPT partition table.
take care
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

How to install REDUCE Computer Algebra System

How to install REDUCE Computer Algebra System in macbook pro Yosemite 10.10

That doesn't appear to have been updated for nearly 5 years.
The latest OS X version supported is 10.6 Snow Leopard.

How to install 0FI_GL_10 in OLTP system

Hi! Tell me please how can I install 0FI_GL_10 in OLTP system (for next replication to BW system). Do I need install it from BI Content, that is do I need install BI Content in OLTP system at first?
Thanks,
Olga

Hi! I run RSA9. I got message "The application component hierarchy was transfered from the Content". But the folder "SAP" in "Source Systems" stays empty: no any subfolders and source systems in it. When I try to open folder "SAP" I get message "No entry for BW_USER in table RSAMIN available".
The folder "BI" exists in Source Systems but with strange content: something called "Sender", when I click twice on it I see "NODESNOTCONNECTED" and different data sources in it, for example, "Aggregated Status for Area of Responsability"... "Planning Calendar" ... etc
Please else any ideas?
Thanks,
Olga

How to install Onekey Recovery Boot System

Hello,
A month ago, I bought new Lenovo G460. The unit have Onekey Recovery button that can make you boot to Onekey Recovery System (have own partition)
Yesterday, I recovered my Windows 7 and it was failed. Suddenly, all my Recovery System partition gone..
Can someone help me how to get the application and how to install on that partition?
Thanks,
PinSki

your welcome.

Install a basic KDE System without thousands of apps

Hi there...
I just wanted to know how to install KDE without installing tons of programs with it. I'm imagining something like this: I install KDE, and when I start it, I have a full Desktop environment, but without 3 browsers and 5 music players already preinstalled...
Do I have to (or should I) use kdemod, or is it possible (and wise) to do this with the standard KDE?
Gaspode

kdebase-workspace is a minimal KDE install. For everything else see http://wiki.archlinux.org/index.php/KDE_Packages

How to install two different operating systems?

Hi Guys,
In my macbook, I was using Server 2003, installed through Bootcamp. For some reason I urgently needed to install Windows XP on another partition i.e, I needed two operating systems natively without being used VMware.
Could you please post how could I succeed this through Bootcamp or any other third party software?
I really appreciate for your fast response.
Reg,
Sri.

Other possible setups:
run OS X from external
- there are even ExpressCard eSATA - and it may be possible with some to install later versions of Windows 2008 or 7.
Shrinking Windows partition (backup wtih WinClone or something) will interfere to some extent with the Apple OS Switcher but does work; then install in there.
Using a PC to run and manage Windows - after using my Mac for almost 3 yrs - is so much easier, and flexible, even though the Mac Pro can have as many Windows partitions as you want on multiple drives (internal) and partitions.
I know you can install XP after Vista or 7 is installed w/o editing the boot.ini or using EasyBCD to 'fix' Windows boot manager.

How to Install JAVA on working systems

Hi gurus,
system : Windows 2003 64bit and SQL
on this server i have already installed :
DEV + Java (test/development)
BWD (development for BW NW2004s)
SSM + Java
i would like to install Java for BWD. Which packet should i install. How to start install.
Regards.

Hi Markus,
i go through Planing->Technical Infrastructure Guide -> Installable Software Units -> SAP Systems Based on SAP NetWeaver Application Server with Usage Types (Software Units) -> SAP Application Server Java is it correct ?
Next i assume : Installation Guide - SAP NetWeaver 7.0 including EHP 1 correct ?
Media Label : SAP EHP1 FOR SAP NETWEAVER 7.0 Java based Software Components correct ?
I am little confused . Please help.
Regards

How to install apex on my system?

Hi,
I have installed Oracle 9i on my system. I am able to use the Oracle HTTP server and able to access ISQL through the following path := http://localhost:7778/ISQL.
I have downloaded apex 3.1. zip file. Please let me know the exact path where I need to extract the file so that I can use it.. My Oracle is installed in C:\\OracleNT\
Any help would be greatly appreciated.
Thanks and Regards,
coolsub82

Subash:
Please read the installation instructions at http://download.oracle.com/docs/cd/E10513_01/doc/install.310/e10496/toc.htm
Varad

How to install a non-English system?

I would like to install some Chinese software in my Nokia cell phone, is there anyone can tell me how can I get an Chinese language package first?

yeah i can tell you. take the phone to a Nokia Care point.
If you want to thank someone, just click on the blue star at the bottom of their post

How to install windows on a system already running Arch? [SOLVED]

Hello.
I use Arch for my daily use, but I'm having a big problem, my little brother. He wants to play videogames on the laptop and that's it, I know you can do it from Arch but I honestly don't want to install Steam neither anything else than what I need so I'm going to install Windows for him to play. I'm currently partitioning my HDD, but I was reading and I found out that you need GRUB in order to dual boot, I use syslinux, so my main question is, can I simply install windows and then install GRUB? Or do I have to do something before this?
Any help is welcome as I'm really new to dual booting Linux with Windows and the last time I used Windows was in 2006. So please help me or refer me to a good article as I'm scared to break something.
Last edited by d15d18a (2014-12-24 04:28:58)

Syslinux works great!! And yeah, I had an option like that but it was inside Windows power management, not in my BIOS, I've dissabled it and it works like a charm... But I'm angry, I did all this, I bought this mother f***er 3 Steam games for more less 80 bucks, a 30 bucks PC gaming controller from Radioshack and he ended up downloading a Gameboy Emulator and playing some Pokémon game
Thank you very much for the help, everything works fine now. And merry Christmas

How to Install BlackBerry 4.5 System Software in the Blackberry 8310?

I followed the instructions to download and install the BlackBerry Desktop Manager 4.5 and the BlackBerry Device Software 4.5 for BlackBerry 8310. This was done correctly and the installation was successful.
When I opened the Desktop Manager to install the Device Software on the phone, there was no software to install.
It was installed on my computer but could not be installed on the phone. The software appears in the list of programs installed on the installation and uninstallation manager in the control panel of the computer, but does not appear on the Desktop Manager to be installed.
What steps should I follow?
Solved!
Go to Solution.

Close Desktop Manager.
Go to folder: C:\Program Files\Common Files\Research In Motion\Apploader
and delete Vendor.xml file
Now, connect the device and launch BB Desktop Manager.

How to install new fonts using code in java?

Hi,
How to install font in a system using java, provided i know the font file's address. Is there any specific class/method available for this purpose? Copying the file to windows/font directory will work for windows, but I think it wont be generic to all operating system. So is there anyway to install a font using code?
I also want to know how to make the font available only until my application window is open, It must be available to all other external applications like photoshop, word etc., When I close my window it must un-install automatically or be made not available to other applications. Any suggestions? Please do help! Thanks in advance...

I have already tried the above, But the font created using input stream is available only to my application* and is not viewable in photoshop.*. I realize this. Like I said, I know of no method that will register/deregister the font with the system. You'll have to create your own method that takes the operating system into account.
String os = System.getPropery("os.name");
if(os.equals("Windows Vista")) {
}else if(os.equals("Windows XP")) {
}else if(os.equals("Windows NT")) {
}else if(os.equals("Solaris")) {
AIX
Digital Unix
FreeBSD
HP UX
Irix
Linux
Mac OS
Mac OS X
MPE/iX
Netware 4.11
OS/2
Solaris
Windows 2000
Windows 95
Windows 98
Windows NT
Windows Vista
Windows XPYou'll need the standard font directory for each system. I think all the window ones are C:\Windows\Font\ . Each OS probably has its own little quark (like having several font directories or throwing different security exceptions). Undoubtly it's going to require some research and a bit of trial and error. You can probably work some magic with Runtime.exec(...) as well.
The alternative would be to google for some libraries that offer similar functionality, or promt the user for the system's font directory and save the location of the directory in a file somewhere for future use (so the user dosen't have to specify the font directory everytime he/she starts up the application).

Black screen on GDM, how to install xorg-base from grub?

I followed these installation guides to install archlinux in a virtualbox before testing it out on a real machine:
* http://wideaperture.net/blog/?p=3851
* https://wiki.archlinux.org/index.php/Vi … al_Machine
* http://lifehacker.com/5680453/build-a-k … he-process
* http://www.muktware.com/2013/11/how-to- … ed/16825/6
* http://cbopt.com/how-to-install-arch-li … ng-system/
* https://wiki.archlinux.org/index.php/Beginners%27_Guide
It was really all smooth sailing until I finished installing gnome and gnome-extra. These seemed to go well, but then I ran into a problem a lot like this guy's:
https://bbs.archlinux.org/viewtopic.php?id=119657
Namely, I now get past GRUB and am greated with a black screen that I seem to have no control over. I can't boot, can't type, can't add my user to a video group, nothing.
So, I have two questions:
* What seems to be wrong? From that thread, I think I need to install xorg-base, possibly? Could it be that I installed the wrong video drivers for a virtual machine? (I assume it's the virtual machine I need drivers for, not my actual video card, right?)
* In a situation like this, how should I properly use GRUB to boot into CLI where I can diagnose, fix stuff, and do things like install xorg-base? I can't find any way to boot to command line.
**Update**
Here's a little more research I've done.
1. I booted up using my installation disk to try accessing my files, maybe I can set something to not use GDM, as per here: http://askubuntu.com/questions/76543/ho … -selection
2. But I didn't know how to access underlying files when on boot disk, so I did this:
$ fdisk -l # told me sda2 was my Linux Filesystem
$ sudo mount /dev/sda2 /mnt
3. From the beginner's guide section on GUI troubleshooting here, https://wiki.archlinux.org/index.php/Beginners_Guide, I tried this (prepending my mount point):
$ grep EE /mnt/var/log/Xorg.0.log
4. Well, I can't copy the output because of no GUI, but there were 3 errors:
(EE) Failed to load module "modesetting" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
Are any of these relevant to why I boot into a black screen rather than something that looks like GNOME?
**Update 2**
Something similar for:
grep EE /mnt/var/log/gdm/:0.log.4
(EE) Failed to load module "modesetting" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) AIGLX: reverting to software rendering
** Update 3 **
Discovered I could TTY to another terminal. In virtualbox this is Host + F2.
Re-enabled gdm, restarted xstart, ran gnome, no luck.
$ sudo pacman -S xorg
told me I was out of disk space, uh oh! Of course, I made it only 4 GB since this is a virtualbox demo.
OK, let's resize my sda2 disk. Restart with the live CD.
and now...?
Last edited by mittenchops (2014-01-20 06:58:31)

I followed these installation guides to install archlinux in a virtualbox before testing it out on a real machine:
* http://wideaperture.net/blog/?p=3851
* https://wiki.archlinux.org/index.php/Vi … al_Machine
* http://lifehacker.com/5680453/build-a-k … he-process
* http://www.muktware.com/2013/11/how-to- … ed/16825/6
* http://cbopt.com/how-to-install-arch-li … ng-system/
* https://wiki.archlinux.org/index.php/Beginners%27_Guide
It was really all smooth sailing until I finished installing gnome and gnome-extra. These seemed to go well, but then I ran into a problem a lot like this guy's:
https://bbs.archlinux.org/viewtopic.php?id=119657
Namely, I now get past GRUB and am greated with a black screen that I seem to have no control over. I can't boot, can't type, can't add my user to a video group, nothing.
So, I have two questions:
* What seems to be wrong? From that thread, I think I need to install xorg-base, possibly? Could it be that I installed the wrong video drivers for a virtual machine? (I assume it's the virtual machine I need drivers for, not my actual video card, right?)
* In a situation like this, how should I properly use GRUB to boot into CLI where I can diagnose, fix stuff, and do things like install xorg-base? I can't find any way to boot to command line.
**Update**
Here's a little more research I've done.
1. I booted up using my installation disk to try accessing my files, maybe I can set something to not use GDM, as per here: http://askubuntu.com/questions/76543/ho … -selection
2. But I didn't know how to access underlying files when on boot disk, so I did this:
$ fdisk -l # told me sda2 was my Linux Filesystem
$ sudo mount /dev/sda2 /mnt
3. From the beginner's guide section on GUI troubleshooting here, https://wiki.archlinux.org/index.php/Beginners_Guide, I tried this (prepending my mount point):
$ grep EE /mnt/var/log/Xorg.0.log
4. Well, I can't copy the output because of no GUI, but there were 3 errors:
(EE) Failed to load module "modesetting" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
Are any of these relevant to why I boot into a black screen rather than something that looks like GNOME?
**Update 2**
Something similar for:
grep EE /mnt/var/log/gdm/:0.log.4
(EE) Failed to load module "modesetting" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) AIGLX: reverting to software rendering
** Update 3 **
Discovered I could TTY to another terminal. In virtualbox this is Host + F2.
Re-enabled gdm, restarted xstart, ran gnome, no luck.
$ sudo pacman -S xorg
told me I was out of disk space, uh oh! Of course, I made it only 4 GB since this is a virtualbox demo.
OK, let's resize my sda2 disk. Restart with the live CD.
and now...?
Last edited by mittenchops (2014-01-20 06:58:31)

How to install a lean kde system?

Similar Messages

Maybe you are looking for