How to install a pci-6030e in a pxie-8102 chassis

I removed a PXI-6030E multifunction IO card from a PXI-1010 chassis, which is installed in a SCXI backplane. I can now see the device in Devices and Interfaces under the PCIe-8102 chassis, but it only lets me use a visa test panel. I have no idea how to use the visa test panel and none of the options make sense. From everything I've read, I should be able to use this device through DaqMX, but when I try to add a new DaqMX device, and select new analog voltage input -- or any input for that matter -- it says no supported devices found. I'm totally lost, but i know on the old PXI box it was able to show up through DawMX, but I think that was because it was on the SCXI backplane. I don't understand what's going on, but surely this isn't NI trying to force me to use SCXI is it?? I'm trying to resurrect this PXI card because i need to make some simple analog measurements and it seems a shame to replace it considering all the money i spent on it before.

HI David,
The behavior that you are seeing is definitely odd. When you are measuring the dedicated 5V output with your DMM what ground are you referencing? After you click Run on the Test Panel when measuring an AI channel you see a constant 10V, correct? Which pins is your input signal connected to when running this test?
Finally, what is the other chassis that you have which was working?
Brian H. -- Applications Engineer

Similar Messages

How to install a PCI card in my HP 110-335t expansion slot?

The HP 110-335t desktop comes with one expansion slot, per the product spec. Right? How do I open up the box and install a PCI card?
This question was solved.
View Solution.

Hi,
Review this HP posted information.
You can use the PCI-E mini-slot for a wireless LAN card. Contct HP Support or Sales and get a recommendation. You will still need to configure an antenna.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How To Install mini-pci wireless card in 1955-S805 ?

I'm trying to install a new mini-pci wireless card in my Satellite 1955-S805. I was able to pry off the black shiny strip above the keyboard, and unscrew the two screws holding down the keyboard. But under the keyboard is a silver metal plate. There doesn't appear to be a way to get past that. Everything I've read seems to say that the mini-pci card goes under the keyboard.
Does anyone know how to install a mini-pci card in these 1955-S805 notebooks? Or does anyone have a tech manual on this model?
Thanks,
Pat

Hi Pat
I am not sure but you have an US model. I have 1900-703 notebook. It is a European model and I had no problem to install mini-pci wireless card.
Your unit has also wireless keyboard. Am I right?
If you want to built in wireless card you must remove the keyboard from notebook using keyboard releases on the left and right side of your unit. After that you can see small cover on the place of keyboard and this cover is fixed with one screw. Under this small cover there is wireless card slot.

How to install NI6711 (PCI) & MIO-16X (ISA) on the same PC?

NI6711 & MIO-16X work with two differents versions of NI-DAQ: Each version can detect only one DAQcard. What the solution to install them on the same PC?

I know that the pci-6711 is supported since nidaq 6.5 and that since that version the at-mio-16x is no longer supported. Thus, there is no way to get them to install in the same computer. Either you must install them in different computers, or you should get a new board which performs the same operations of the mio-16x. There is a huge variety of E series boards which perform operations much better than that legacy board. Maybe you can get it to exchange with your Sales Rep.
Hope this information is useful.
L Aguila
Applications Engineer
National Instruments

How to install a full length PCIe card?

Having trouble installing Digidesign PCIe accel cards in my Macpro. I can't seem to get them past the chassis edge. What's the trick?

Hi Jim,
This is the link for OWC Install Videos:
http://eshop.macsales.com/installvideos/
Just scroll down to whichever Mac Pro model you have, and select the relevant video.
Regards,
Bill

How to install driver for Intel Pro 1000 PCI Network-card

Hello,
I just bought the a.m. Intel Pro 1000 Network adapter, but I don't know at all how to install the driver for Solaris 10.
The installation instructions delivered from Intel didn't help me at all, because I can't uncompress the INTCGigae.pkg and the INTCGigaE.tar.z files.
I copied them to /tmp and folllowed Intel's Installlation Instructions.
Please keep in mind I am new to Solaris 10, with no Linux/Unix experience, when helping me.
Thanks in advance for help and assistance.

Hi!
And what happens if you install the driver from the Toshiba WLAN portal:
http://aps2.toshiba-tro.de/wlan
I still dont know what you mean with Askey for Toshiba
You should try to install the driver manually. Choose in device manager the WLAN card, right click and select Update Driver. Choose the advanced installation where you can choose the driver directory yourself and navigate to the folder where you have stored the downloaded driver.

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

How to install the NI-DAQmx driver on a real time target PC?

Hi, I’m painful about how I can install a PCI-6363 DAQmx on my real time desktop PC target. The PCI-6363 is directly connected to the real time PC. And I’m using LabVIEW 2011 and MAX 5.0.
The DAQmx device driver can be seen in software lIst in the host PC, but it can not be found in the install wizard. Is there something wrong with my host PC? or is that wrong to connect PCI-6363 with real time desktop PC?
I would be grateful for any advice that I could get here.
Solved!
Go to Solution.

Hi Zhleo,
If you are about to use the PCI-6363 with the Real-Time Desktop you are right you need to have it installed, and then you need to deploy DAQmx driver software to the real-time target.
To do that you access your real-time desktop under Remote Systems in MAX and start the Real-Time Software Wizard. There you should see DAQmx listed.
In case you do not have DAQmx listed there, see this KB: Deploying DAQmx to a Real-Time Controller or PC?
Regards,
Eirikur Runarsson
Platinum Applications Engineer
NI Denmark

Full backup ( ~ 1 TB ) using external HD - speed USB vs. Firewire vs. eSATA - what are relative speeds - how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)_

    Hi All,
     I'm trying to resume regular scheduled Full backup ( ~ 1 TB ) of drives using external HD (to allow off-site redundant backup storage) .
     What are relative speeds of USB vs. Firewire vs. eSATA ?
     I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Thanks

Jim Bogy wrote:
...I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Adding a USB 3.0+eSATA PCIe card, which The hatter mentions, is the best solution that I've found. See http://eshop.macsales.com/item/CalDigit/FASTA6GU3/. The card is not cheap, but the USB 3.0 works flawlessly (which can't be assumed; ask me how I know) and the eSATA connection allows booting from the connected drive. Grant Bennet-Alder's point about HD speed is important to consider; in addition, the size of the individual files being backed up and where on the backup disk they're going will affect overall transfer speed. For example, using the USB 3.0 connection on that CalDigit card going to a Toshiba 3TB external, the transfer rate for a big file (say a virtual machine file) from an internal SSD boot drive was about 145 MB/sec while a bunch of little files might drop to 30 MB/sec and both rates decrease as an inner partition on the external is used. All told, a nearly 700 GB backup took under 1.5 hours. Using a HD as the source added almost an extra hour, though a WD external was used for that. Using a WD green drive plugged into this http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ with an eSATA connection took about 2.5 hours also, but that was bootable whereas the USB 3.0 connection is not.
Another point to consider is that USB 3.0 is ubiquitous on PC's now so there's lots of price competition for externals; not so much for eSATA externals.

How to install second Ethernet-adapter

I've got Ultra 5 and there is the on-board Ethernet-adapter on it. But i want to insert another (PRO/100) PCI adapter.
I did it, and ptrconf says:
pci (driver not attached)
ethernet (driver not attched)
I tried sys-unconfig - but this utility always trying to configure my ON-BOARD card... So, how to install drivers?
Thank you.

I've got Ultra 5 and there is the on-board
Ethernet-adapter on it. But i want to insert another
(PRO/100) PCI adapter.
I did it, and ptrconf says:
pci (driver not attached)
ethernet (driver not attched)
I tried sys-unconfig - but this utility always trying
to configure my ON-BOARD card... So, how to install
drivers?
Thank you.

How to install Leopard in my iMac if it has no DL-DVD player?

How to install Leopard in my iMac if it has no DL-DVD player?
My eMac is:
eMac G4/1.25 (USB 2.0) with 2GB RAM

Most PPC Macs cannot boot OSX from USB, they need Firewire... that being said, out of 13 PPC Macs I had one that booted from USB Drives, including Flash Drives, it was my eMac/1.42GHz as a matter of fact, USB drives would show as a boot choice if I held the Option/alt key at bootup, (nowhere else), but It lost that ability when I reset the NVRAM.
The USB boot workaround that works for some is...
Connect the drive to your machine, and find out which partition the OS X system is installed on. I usually find this by going to Disk Utility and looking at the info for the partition on the USB disk with OS X. That is, disk2s3 is usually for a USB disk with no OS 9 drivers installed that is the second disk disk. disk3s9 might be a USB disk with OS 9 drivers that is considered the third disk. There are other ways of finding this out, but in my case, my disk is disk2s3 (the 3 on the end will come into play soon).
Start up the machine in Open Firmware (this is the fun part). Hold Command-Option-F-F right after the machine is turned on.
Here is the moment of truth. If this step does not work, I have had very limited success getting a machine to boot off USB2. In Open Firmware, type devalias, and you should get a list as output. In this list, look for ud, usually below where you see hd (ud is "USB Disk," I presume). If found, it will usually have beside it /pci@f2000000/usb@1/disk1, or something similar. Again, if you see this, I have not had this fail yet.
Now type printenv boot-device, which will usually get you output of boot-device hd:,\\:tbxi. (See where this is going yet?)
Type setenv boot-device ud:3,\\:tbxi where the number after the colon corresponds to that partition number we found in step two. You should get an ok back.
Type printenv boot-device, and you should see the change displayed already. Something like:
boot-device ud:3,\\:tbxi hd:,\\:tbxi"
http://hints.macworld.com/article.php?story=20060301112336384
You'd need to clone the Install Disc to a Flash Drive, or make a DMG of it then Restore it to the Flash drive.

How to install new graphics card

Hi everyone. I have an intel mac pro and i want to install my pci express ati xtx 1900 card into it. It fits in the slot nice and snug but requires the 6 pin power cable to run the card. I have no idea where this is inside the mac and need help getting my new graphics card to work. i know this card works on a mac so how to i do this. please, please someone help. thank you

If you click on the "manuals" from the small strip above, then click on Desktop -> Mac Pro ->
http://www.apple.com/support/manuals/macpro/
There is a pdf. You should also have a small booklet that came with the Pro, and I am surprised the card doesn't come from Apple with a guide and photos.

How to install drivers for ati radeon 3200?and how to config xorg.co ?

how to install drivers for ati radeon 3200?and how to config xorg.conf?

mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier

How to install windows on the SSD (Y580)

I have bought an Y580 recently wIth a 64GB SSD and 1TB HDD. I asked the salesperson upfront if the OS would be on the SSD. He said yes. Turns out that it is not. When i returned to them they told me it's a hybrid drive solution. And they have no idea how to install Windows on the SSD.
I did some research and found out that Lenovo uses *Rapiddrive* to speed up programs. Hence why i can't see the SSD in WIndows as it is merged with the 1TB HDD. In Disk management 2 disks show , 0 and 1 , but Windows asks to give disk 1 a MBR or GPT (this is apparantly due to the rapiddrive methode).
My questions:
* Is it possible to install Windows on the SSD and if so how can that be done without loosing the backup on the hidden partition of the 1TB disk? (so that OKR still works)
* What are the benefits of Rapiddrive over using the SSD as bootdisk?

Since it is a hybrid drive, it works a little bit differently; Lenovo's "Rapiddrive" is also different from other hybrids, and in the sake of making it "user friendly" and seen as a single disc they have probably nerfed some configurability for the intermediate/advanced users. However, Windows should already be installed on the SSD portion of the drive, this should be done automatically according to this press release:
http://shop.lenovo.com/us/sitelets/ee/consumer-news
"In the factory we will preload not just Windows 7 on the SSD, but also our Lenovo applications like OneKey™ Theater or OneKey™ Rescue System. The applications, operating system, drivers and other files are all fully-optimized for Enhanced Experience to make them load much faster. This, combined with their installation on the SSD will make the boot time to Windows desktop even faster. Some portion of the SSD will also be reserved as the Windows Paging File — this is used by Windows as 'virtual memory' additional to the normal RAM installed inside the computer. With the SSD acting as the Paging File, general Windows 7 performance will also benefit, especially when multitasking several applications.
The remaining space, which will typically be around 15GB on a 32GB SSD, will be empty, ready for the user to install their favorite applications and files."
I have some of the fastest SSD's around installed on my desktops (SATA III), and while they are blazing fast, keep in mind the whole boot sequence still isn't going to be instantaneous even with an SSD (the biggest differennce you will notice is by the time Windows is loaded, it's fully loaded to the RAM, whereas a normal HDD you may see the desktop but your PC will still be cranking away with startup processes). If your startup is taking 30 seconds or less, maybe even a little longer, it's probably accessing the SSD just fine; if it's taking closer to 60 seconds, then yeah it may need to be reinstalled/reconfigured.
As for reinstalling, sorry I won't really be able to help, hopefully someone else can come along; I personally have never used OKR anyways, and aside from doing a ghost backup I wouldn't say for sure that OKR would be salvageable with a fresh install. And because the Rapiddrive is its own technology, half SATA half PCI-E, I also couldn't tell you if it's even possible to fully seperate the two and keep them as distinct drives.

How to install Win XP on Equium P200

Hi guys,
I found a very usefull tutorial how to install windows xp onto Equium P200 laptop.
Problem is that when I have done everything whats in that tutorial (used nlite, made xp install cd with sata drivers) Win Xp is showing error.
When u boot from cd, and all the drivers are loaded it will show me a blue screen saying that the installation was stopped to prevent damage to my pc, and its saying that the error is in file pci.sys ...
Any ides what it could be?
Thanks in advance

Hi
Im not 100% sure why this error appears but Ive got one idea.
Possibly the installed Intel Matrix Storage Manger doesnt support the right chipset.
Ive tow different Intel Matrix Storage Manger versions and both versions support different chipsets.
Fact is that different Equium P200 series exist which needs different drivers.
I think you should visit the Toshiba European driver page and should choose the right notebook series! Please compare the series number which can be found at the bottom of the unit!!!
Then try the installation again!

How to install a pci-6030e in a pxie-8102 chassis

Similar Messages

Maybe you are looking for