How to install a second Cd/Dvd writier

I'm wanting to install a second CD/DVD writer. I slipped in into the slot and plugged in the sata cord. Do I just find an unused plug to plug in the power? It makes sense to me, but I just bought a new computer and don't want to mess it up.
This question was solved.
View Solution.

Hi,
You're basically right so this is just to confirm .  Before you start you should ensure all power to the computer has been disconnected and that you ground yourself or wear an antistatic wrist band.
1.  Install the CD/DVD drive in a free drive bay
2.  Connect a SATA cable to your CD/DVD drive and plug the other end in to the next available SATA connector on your        Motherboard.
3.  Plug in the power connector (there will probably be a spare one very close to the power connector plugged in to your existing drive).
That is probably all you will have to do and Windows will detect your new drive as soon as you start up.  If by any chance it doesn't, you may need to enter your system Bios to enable the new SATA connection.
Hope it goes well.
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • How can install a second app icon  of the same on app on a different home screen?

    how can install a second app icon  of the same on app on a different home screen?
    for example i have the phot app on one home screen and the i want the same photo app showing on the other home screens?
    I want to have a duplicate app on on more than one home screen
    Another example if i have the Evernote app showing on my first home screen and then my last home screen as well

    Put it in the dock at the bottom. Apps put there stay there and show at the bottom of all home screens.

  • How to install a second HDD in Stelllite P200D

    I want to install a SSD and move my HDD into the slot for the second HDD. I can't find any document how to install the second HDD. Do I need special adapter or any HW to do that?
    kind regards Frank

    Hi
    At the bottom of the unit you can find two HDD bays. Right?
    But one of the bays does not contain any connectors? Right?
    At the first look this might be a little bit strange but fact is that different Satellite P200/P200D models were available on the market with different motherboards.
    Some would support a 2nd HDD but some units dont. But all models supports the same bottom covers and some people think that an 2nd HDD would be possible which is wrong.

  • How to install the second hard disk (HP ProBook 6560b LG658EA) ?

    How to install the second hard disk (HP ProBook 6560b LG658EA) ?

    Hi,
    You can install a second HDD in the Upgrade Bay - this is detailed on Page 67 of your Maintenance & Service Guide.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to install a second identical printer on network

    I have a HP 3600 already installed on my Windows Server 2003 network and need to install a second HP 3600 but not sure how. Can someone please help me with this?
    roy

    Easy peasy. Check this link:
    http://www.apple.com/support/powermac/doityourself/storage.html
    and download the PDF. the instructions are the same no matter the capacity of the drive. Instructions are also in your owner's manual.
    Good luck!
    -K
    (if this answered your question, be sure to award points!)

  • How to install os x through dvd disk

    i formatted my macbook pro and im trying to install os x 10.6.1 using mac dvd but im inveining ,
    pls help me out of this suitation and tell me how to install os on my laptop

    Welcome To  Discussions alansky1!
    Did you use the procedure posted below to create the Disk Image of the Leopard 10.5.x install disc?
    Insert the DVD that you wish to copy.
    Open Disk Utility, from the Utilities folder.
    From the list on the left side of the window select the original DVD that you wish to copy.
    From the DU contextual File menu select New: Disk Image from Disk....
    Name the disk image and choose Image Format: DVD/CD Master.
    Save to the Desktop.
    When the Disk Image is finished, you can eject the original DVD.
    Back in Disk Utility, from the list on the left side of the window select the new Disk Image. This may be a .cdr or a .dmg.
    From the Images contextual menu, select Burn.
    Insert a new blank DVD and click Burn.
    ali b

  • How to install adobe photoshop cs3 dvd

       How do I install Adobe Photoshop CS3 DVD to my computer  windows 7  I put the DVD in and nothing comes up to install it

    Hi mvigus,
    If the installer doesn't start automatically (you don't see the autoplay screen), navigate to the contents of your disc in Windows Explorer. Double-click the setup.exe file. Ensure that you are logged in as the administrator of your computer. Also, after the installation is complete, run the software with administrator permissions.
    Let me know if this helped.
    Thanks,
    Preran    

  • How to Install OEL5.3 Source DVD from eDelivery

    I'm totally new to installing OEL (not using an OBI)
    I need to have source code available to install the CISCO VPN (at least that's how I'm interpreting the instructions).
    I have downloaded the iso for the source and burned it to a DVD.
    When I look at the DVD I see SRPMS folder, EULA, GPL, RP-GPG-KEY and TRANS.TBL
    Nothing gives me a clue how to install the souce...
    Is it as simple as just copying the rpms to usr\src?
    thanks

    You just need the "kernel-devel" RPM package from the binary distribution; ignore the source media and ".src.rpm" packages.
    # /bin/rpm -Uvh kernel-devel*.rpmYou will need to find the "kernel-devel" RPM on the installation media; use that.

  • How to install itunes without cd/dvd rom support?

    Hi,
    Everybody knows when you install iTunes to any windows device, you will have a problem with your dvdrw afterwards. Till day, every installation i made end up with losing my dvd-rom.
    There is 3 solution to this problem, but those solutions never worked for me and last time i used my company notebook without it's dvdrom for over a year.
    Now, i reinstall my notebook with Windows 8.1 Update 1 and i want to install iTunes for my music but i can' let iTunes do the same thing again.
    Is there anyway install iTunes without cd-dvd 3rd party/usb/firmware driver support?
    I search on net and i found this link but it's way too old
    http://support.apple.com/kb/TA44491?viewlocale=en_US

    QuickTime is required for iTunes to run. You can think of iTunes as a media manager "front end" to QuickTime which handles the actual playing of the media.
    Safari was an optional install when I installed iTunes on my Windows system. I wasn't forced to install Safari. MobileMe is also no longer automatically installed, though it will update if it finds an existing installation. I didn't get it forced on me when I installed on my Vista system.
    You might find this helpful:
    http://blogs.zdnet.com/Bott/?p=554
    Regards.
    One tip: it will pay better dividends if you avoid ranting. Apple won't see your rants (except to delete them) and we, your fellow users who are with rare exceptions the only ones participating here, don't really want to be yelled at.

  • How to install Aperture without original dvd

    I lost my Aperture 2 installation and Aperture 3 upgrade disks. How to install Aperture in my new Macbook ?

    Do you still have the Aperture 2 and Aperture 3 registration codes? Then you can download the Trial installer and use that to install Aperture on your new Macbook.
    You can download the Aperture 3 trial installer to reinstall Aperture from this webpage - there is a link to the trial and instructions on how to reinstall - don't let the title of this page distract you :
    Aperture 3.4: May quit unexpectedly on launch after updating
    The Aperture 3 serial number will be available in the about panel, when you are running Aperture on your old mac (from the main menu bar: Aperture > About Aperture).
    Regards
    Léonie

  • Who knows how to install small windows on DVD?

    Hi Guys I can't remember long time ago i saw a CD preinstalled windows within ready to launch on empty computer.
    that was very helpful to sort out my data when my windows failed to operate and i used it before i install new windows on it.
    Does anyone know that prog or help me to remind how to do it please .. I highly appreciate your help 
    Solved!
    Go to Solution.

    Yes, Neihn is quite right about BartPE being a useful Linux self-contained boot up CD that can help troubleshoot. It is a good tool, but if you're not afraid of a screwdriver a computer user would be well-advised to buy an external drive enclosure matching your type of hard drive for your laptop or PC. When things go bad, even Bart may not boot your PC. So slide that drive out and put it in the case and you have an new big USB drive ready to retrieve your data to another machine. Even better is to buy another barebones hard drive the same as your drive so you can immediately switch out and reinstall Windows in the crippled machine and then bring back the data (hopefully) from the enclosure drive. Just remember that external drives (whether you buy one or make one) will die eventually just like any hard drive...typically 3-5 years, although some last longer and some die very soon. The best backup bet is putting your eggs into many baskets, online storage, relatives computers, external drives, and best of all multiple copies of burned DVDs or CDs you create with your data. Put those in a safe place and you will always have them in your lifetime. DVDs supposedly last 100 years, but I won't be around to see if that is true. *;-0
    Take care,
    Texruss

  • How to install HDMI from HDMI DVD player to watch movies from iTunes?

    I have bought an HDMI outlet for my MacBook Pro, My TV doesn't have HDMI so i bought an HDMI DVD player at big lots (GPX HDMI DVD Player) the mac to HDMI transfer outlet (Rocketfish) i got at best buy same goes for the HDMI outlet. I'm the type that doesn't want to buy more stuff that costs over $40 just to watch movies from iTunes to my TV. I don't want to have a complexed installment i just want to know how to get this going before i get frustrated and stressed out. So could you help me with this situation Please?

    See if this link helps you out.
    http://support.apple.com/kb/HT4072?viewlocale=en_US&locale=en_US
    Never tried it myself but hopefully it's what you're looking for.
    Good luck.

  • How to install Leopard without working DVD-drive?

    I have a MacBook Pro 3,1 (A1226) without a working DVD-drive and I would like to replace the existing 80Gb drive with a 320Gb drive. The hardware is no problem, I did that a few times already, but how to get the OS working?
    I have an TimeMachine backup on a USB-disk of the 10.5.8 (9L31a) installed system. I do not wish to upgrade because there is some old licensed software on it that does not work with a newer OS.
    I also have another MacBook Pro (with 10.7.5) I could hook up with an Ethernet-cable. Theoretically even with a Firewire cable I do not have right now. But when I buy extra things I should perhaps better get an external hard disk enclosure for the 320Gb?
    Please advice.

    Am gonna solve it in another way. I will just get a so-called "9.5 mm PATA Optical Bay SATA Hard Drive Enclosure" and put the 320Gb drive in that one. Sorry to have distracted you.

  • How to Install SNOW LEOPARD by DVD SHARING from WINDOW PLATFORM?

    i need to install SNOW LEOPARD on my LEOPARD running macbook, There is no apple store or imagine store in my town... can u guide me the process i have already installed DVD Sharing application on the WINDOW's system and ENABLED it.... but what is the next Step to go about?

    my macbook throws out the DVD after few spins.... i think it cannot read DVD's or it has become faulty! it would be really helpful if you guide me the process of installing it via DVD sharing.
    Thank you.

  • I purchased a lightroom 5 cd from the store, and have used the first download on one computer. I would like to know how to install the second download to my other mac without a cd drive?

    PLEASE HELP!!!

    Download the installer file for Lightroom 5 again, using the Mac without a CD drive. Install it, enter your serial number, done.

Maybe you are looking for

  • Windows Vista Aero theme - incompatible with iTunes?

    Whenever I boot up my laptop I get an error saying iTunes is stopping my Vista Aero theme from showing. When I go to task manager and end the ituneshelper.exe module process, the Aero theme is then accessible. I know the ituneshelper.exe is an import

  • Error in the Work item

    Dear All,              I am getting the manager is trying to see the work item. he is getting this error. "Message number cannot be read from workflow container". What may be the problem for this. how to resolve this issue. Message number cannot be r

  • Save As with file containing tags and fields

    We are using Windows XP, AcroProf 8.1.5. We create non-tagged PDFs directly from InDesignCS3. We manually tagged this doc. After making updates to the original InD file, we create a new PDF. We open the original PDF file containing all tags and field

  • Wireless keyboard Home/End not working

    I apologize if this has been answered before but I searched and didn't find it. I also apologize if this is a stupid question but I just got my first Mac 3 days ago. My problem is with the Home/End shortcuts on the wireless keyboard (Fn-Left Arrow an

  • CFEclipse and RDS on Mac OSX (Tiger)

    I'm running CF8 with the stand-alone CF web server on a MacBookPro running OS X (Tiger). I installed Eclipse 3.3 and the CFEclipse plug-in, then ventured to install the ColdFusion8 Extensions for Eclipse (Release 3.3.1.1). All installed without error