How to install a second identical printer on network

I have a HP 3600 already installed on my Windows Server 2003 network and need to install a second HP 3600 but not sure how. Can someone please help me with this?
roy

Easy peasy. Check this link:
http://www.apple.com/support/powermac/doityourself/storage.html
and download the PDF. the instructions are the same no matter the capacity of the drive. Instructions are also in your owner's manual.
Good luck!
-K
(if this answered your question, be sure to award points!)

Similar Messages

How can install a second app icon of the same on app on a different home screen?

how can install a second app icon of the same on app on a different home screen?
for example i have the phot app on one home screen and the i want the same photo app showing on the other home screens?
I want to have a duplicate app on on more than one home screen
Another example if i have the Evernote app showing on my first home screen and then my last home screen as well

Put it in the dock at the bottom. Apps put there stay there and show at the bottom of all home screens.

How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2?

How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2? Several attempts with various downloads from Apple and Samsung sites have failed. Any help is higkly appreciated. Thanks in advance!

Thias is what I find in system information:
Samsung Scanner:
Version:          2.01.12
Erhalten von:          Apple
Zuletzt geändert:          10.04.14 21:20
Art:          Universal
64-Bit (Intel):          Ja
Signiert von:          Software Signing, Apple Code Signing Certification Authority, Apple Root CA
Ort:          /Library/Image Capture/Devices/Samsung Scanner.app
Informationen:          Copyright (C) 2013 Samsung Electronics Co., Ltd.

How to install a second HDD in Stelllite P200D

I want to install a SSD and move my HDD into the slot for the second HDD. I can't find any document how to install the second HDD. Do I need special adapter or any HW to do that?
kind regards Frank

Hi
At the bottom of the unit you can find two HDD bays. Right?
But one of the bays does not contain any connectors? Right?
At the first look this might be a little bit strange but fact is that different Satellite P200/P200D models were available on the market with different motherboards.
Some would support a 2nd HDD but some units dont. But all models supports the same bottom covers and some people think that an 2nd HDD would be possible which is wrong.

How to install the second hard disk (HP ProBook 6560b LG658EA) ?

How to install the second hard disk (HP ProBook 6560b LG658EA) ?

Hi,
You can install a second HDD in the Upgrade Bay - this is detailed on Page 67 of your Maintenance & Service Guide.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to install samsung scx-4200 printer/scanner on yosemite?

How to install samsung scx-4200 printer/scanner on yosemite?
iam not able to install the drivers for samsung scx-4200 printer/scanner
is there any method for wifi print from my mac air to samsung scx-4200 printer/scanner

Try SpliX, it works ok.

How to install a tcp/ip printer

How can I install a tcp/ip printer on my powerbook G4

What is the make/model of this printer? Does it have a built in ethernet print server?
In general terms - you open the Printer Setup Utility, click to Add a new printer, select "IP Printing", select the type of IP Printing protocol you want to use, enter the IP address of the print server, and then select the printer driver.

How to install Epson Stylus C88 printer on 10.9.3?

How do I install Epson Stylus C88+ printer? Is it supported by 10.9.3?

Hi Janet ...
There is a driver available for v10.9 Mavericks to download here > http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58602&BV_UseBVCooki e=yes&infoType=Downloads&platform=OSF_M_X9
After you download the driver, open System Preferences > Printes & Scanners then select the Print tab.
Then click ➕ to install the printer.

HT1338 how to install hp jet 1000 printer software on my mac

how i can i install hp jet 1000 printer software, connect it to my mac book air and get it to operate?

If your printer were AirPrint compatible, this would explain how to do it:
AirPrint basics
But I believe your printer is not one of those listed in the article as AirPrint compatible. So you'll have to visit HP's website for help.

How to install a second Cd/Dvd writier

I'm wanting to install a second CD/DVD writer. I slipped in into the slot and plugged in the sata cord. Do I just find an unused plug to plug in the power? It makes sense to me, but I just bought a new computer and don't want to mess it up.
This question was solved.
View Solution.

Hi,
You're basically right so this is just to confirm . Before you start you should ensure all power to the computer has been disconnected and that you ground yourself or wear an antistatic wrist band.
1. Install the CD/DVD drive in a free drive bay
2. Connect a SATA cable to your CD/DVD drive and plug the other end in to the next available SATA connector on your Motherboard.
3. Plug in the power connector (there will probably be a spare one very close to the power connector plugged in to your existing drive).
That is probably all you will have to do and Windows will detect your new drive as soon as you start up. If by any chance it doesn't, you may need to enter your system Bios to enable the new SATA connection.
Hope it goes well.
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to install HP Deskjet 990cxi printer on laptop...

I have spent two days trying to install my excellent HP Deskjet 990cxi on my new laptop running Win7 Home Premium on an AMD 64-bit processor. I want to do two things:
to set the printer up to run direct from a USB port on my laptop. Having done this, I then want
to set the printer up on BT Home Hub Type 2A, connected through the hub's USB, as a network computer.
So far under windows, this has proved a huge problem. It seems that the printer settings file is in 32-bit, but in the attempt to install the printer through the Windows "add printer" in Devices and Printers, and after a Windows update on the program to find Deskjet 990c, I run into a brick wall with the printer failing to install. I get the following message: "Printer driver was not installed. Access is denied ". Yet I am loading the printer drivers as Administrator.
By contrast, I also run Ubuntu 11.04 linux on this computer under Windows.
Ubuntu loaded the 990cxi drivers in an instant when it was connected via USB to the laptop; and more importantly,
Ubuntu set the printer us as a network printer running off the BT Home Hub type 2A and it worked perfectly. I even tested it by sending a graphics file from my garden to the printer indoors and the quality was perfect.
So the observation is this: If Ubuntu can load both printer settings on the same laptop, why is Windows 7 such a trial? Can HP or BT Customer Service do anything about this?

This might help:
I had huge problems with my HP Laserjet 5M on getting a Homehub 3.0 - I'd used a Sky router before and had similar problems at the start with that. The BT Homehub is a very poor piece of equipment and the BT support staff (in India) are absolutely useless, they try to help and got me to allow them to remotely go on my screen and control my computer - so I could see exactly what they were doing - the computer equivalent of a bogbrush to a blocked bog - not impressive and 2 days and over 2 hours on the phone got me nowhere.
Finally found the instructions - or similar I'd used some years ago on the Sky hub:
Instructions on how to set a LaserJet 5M for IP address use on a network. Other printers models may may be similar.
         This is necessary on Mac OSX 10.6+ due to the loss of Appletalk support which made it much easier to configure with Default.
         • Press Menu, repeatedly, the following messages appears on the control panel: HP MIO MENU
         • Press ITEM. - CFG NETWORK=NO* will appear.
         • Press the PLUS button once. - CFG NETWORK=YES* will appear.
         • Press SELECT .
         • Press ITEM repeatedly until CFG TCP/IP=NO* appears.
         • Press the PLUS button. CFG TCP/IP=YES* will appear.
         • Press SELECT.
         For DHCP based IP addressing:
         • Press ITEM until BOOTP=YES* appears.
         • When using BootP or DHCP, keep the setting BOOTP=YES*. If set to BOOTP=NO*, then press the PLUS to change it to BOOTP=YES.
         • Press SELECT to set, then GO.
         • The BootP or DHCP server will configure the TCP/IP parameters on the HP Jetdirect.
         • No other TCP/IP configuring is necessary.
         • Print a self-test page to verify the IP settings.
         • Press Menu until TEST MENU appears.
         • Press Item until PRINT SELF TEST is displayed.
         • Press SELECT .
         • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
         When set for BootP the lower right corner of the test page display something like:
         TCP/IP STATUS: READY
         HOST NAME: 192.168.2.10
         CONFIG BY RARP/BOOTP
         IP ADDRESS: 192.168.2.10
         SUBNET MASK: 255.255.255.0
         DEF. GATEWAY 192.168.2.1
         SYSLOG SERVER: NOT SPECIFIED
         IDLE TIMEOUT (SECONDS): 90
         SNMP GET CMTY NAME: ALL
         SNMP SET CMTY NAME: NONE
         BOOTP/DHCP SERVER: 0.0.0.0
         If you want to set the printer to a static IP address:
ALSO if you do NOT have a JetDirect follow the instructions below:
         • Press ITEM until BOOTP=YES* appears.
         • Press the PLUS button. BOOTP=NO will appear.
         • Press ITEM . IP BYTE 1=192 will appear.
         • Press the PLUS or MINUS button until the value of the first byte of the IP address appears on the control-panel display.
         • Press SELECT to set that byte.
         • Press ITEM to continue.
         • Repeat to configure the remaining bytes of the IP address you wan to set. e.g., IP BYTE 2=168 , IP BYTE 3=2, IP BYTE 1=10) = 192.168.2.10
         • Repeat Steps to configure the subnet mask bytes (SM BYTE 1=255, SM BYTE 2=255, SM BYTE 3=255 , SM BYTE 4=0) = 255.255.255.0
         • Repeat Steps to configure the syslog server IP address (LG BYTE 1=0,LG BYTE 2=0, LG BYTE 3=0, LG BYTE 4=0) = 0.0.0.0 (Mine had the BYTE 4=1 and only when I reset it to BYTE 4=0 did everything go correctly).
         • You can leave this at 0.0.0.0 if not needed.
         • Repeat Steps to configure the default gateway (GW BYTE 1=192, GW BYTE 2=168, GW BYTE 3=2, GW BYTE 4=1) = 192.168.2.1 (often it is automatically set by your router and you do not have to do anything other than check this is correct).
         • Configure the timeout (TIMEOUT=90). You can leave the default at 90 seconds.
         • Press GO .
         • Print a self-test page to verify the IP settings.
         • Press Menu until TEST MENU appears.
         • Press Item until PRINT SELF TEST is displayed.
         • Press SELECT .
         • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
         When set to a static value it looks something like:
         TCP/IP STATUS: READY
         CONFIG BY FRONT PANEL/TELNET
         IP ADDRESS: 192.168.2.10
         SUBNET MASK: 255.255.255.0
         DEF. GATEWAY 192.168.2.1
         SYSLOG SERVER: 0.0.0.0
         IDLE TIMEOUT (SECONDS): 90
         Add the printer.
         • To add the printer on Mac OSX 10.6+, open the Printer & Fax Preference panel.
         • Unlock if locked.
         • Press + to add.
         • Select HP JetDirect - Socket from the Protocol pulldown menu.
BUT if you do not have a JetDirect then click the Line Printer Daemon – LPD option instead.
         • In the address field, enter the IP address from the Test Page printout.
         • Print Using should set itself to LaserJet 5M from the built-in drivers in Mac OSX 10.6+ within a few seconds if it can communicate with the printer.
         • Type in a name you want to give the printer. It will use its IP Address as the name if nothing is entered.
         • Type in a location if you desire. Not sure where this shows up.
         • Press Add.
         • The Installable Options are determined and the printer is added.
NOTE – ref users without a JetDirect:
                  • If you get a message telling you the printer is busy – you have probably indicated JetDirect or Internet Printing Protocol - IPP option in the Protocol pulldown menu by mistake – delete the printer and go back and reset it with the Line Printer Daemon – LPD option instead.
Good luck.

How to install an Officejet 8100 printer on a hybrid network?

Hi,
I want to buy an Officejet 8100 printer to use on my home network. My desktop PC has Windows 7 64 bits and is connected to a wireless router through an Ethernet cable. I have also a Windows 7 64 bits notebook, which access the home network through wi-fi. The desktop is near both the router and the printer.
After reading the 8100 installation instructions, I plan to do the following:
1) Install the 8100 hardware, cartridges, etc.
2) Connect the 8100 to the router by using an Ethernet cable.
3) Install the 8100 drivers and software on my desktop PC, by folllowing the steps on "Wired (Ethernet) network" installation instructions.
4) Install the 8100 drivers and software on my notebook by folllowing the steps on "Wireless network" installation instructions.
Is that OK? Is that the correct method of installing the Officejet 8100 on a hybrid network?
Cheers!
This question was solved.
View Solution.

You can connect it either way. You don't have to use an ethernet cable to install the printer. You may be prompted to temporarly connect a USB cable to transfer wireless settings. The document link I provided has pretty detailed instructions on how to connect using either method
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

How to install All-In-One software with network printer?

I plugged my 7310xi into my Linksys WRT54G router. In Windows 7 64-bit I found the printer, installed the default drivers, and it's printing happily via the network.
But I need to install the HP All-In-One software if I want more advanced functions like scanning to my computer.
Downloaded the software from the web. During installation I get to the part where it asks me to choose how the printer connects to the computer. I select "through the network," click next,and it just keeps on kicking me back to this screen and I can't proceed. Any ideas?
Here's the error:
Now Launching=X:\hpzdui40.exe -I XXX -f X:\DIVins??.DAT
fail to load library X:\hpzscb01.dll
CNetworkUIPlugInApp::InitInstance fail to initialize sacabod. Result = o;
GetLastError = 193
RUN: Driver UI Plug-In exits returning 50
Exit code=50
I've set it to run in Vista compatibility mode and Run as Admin.
Message Edited by fuzzybabybunny on 08-06-2009 11:59 AM

I had exactly the same problem with Windows 7 64-bit and HP Photosmart 2610xi. All you need to do is right click on the installation program, go to properties, go to compatibility mode, select Windows Vista SP2 and optionally check run as administrator. It worked after that.

How to install Adobe as a printer in control panel?

I just changed computers. On my old computer, I was able to select Adobe in the printer list to save a document or excel file as a PDF file. However, on my new computer, I am not able to figure out how to get Adobe installed in the printer list. I'm running Windows XP Pro and cleanly installed Adobe Reader 9.0. I have searched the support and forums on this site but am unable to find my answer.
Any guidance will be most appreciated.
Teresa

>I am not able to figure out how to get Adobe installed in the printer list
Easy. Install Adobe Acrobat. Reader doesn't come with the PDF printer.

How to install wireless HP Officejet printer on my Macbook air?

Hi there,
I just bought a MacBook Air for college and I want to install wireless printing.
When we installed printing (non-wireless) on my other laptop we inerted a disk into it to install the printer.
However, I can't insert a disk into my Macbook so I am confused on how I can install wireless printing! Can anybody help me?
I appreciate all your help! Thanks!

You don't need the disc.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

How to install a second identical printer on network

Similar Messages

Maybe you are looking for