How to install a single 2Gb FC adapter with Solaris 10 SPARC ?.

Hi All,
I have the Sun Box runing Solaris 10 SPARC, i tried to install PCI single 2Gb FC adapter on this Server in order to connect to Sun Storage FC. At Ok prompt, i tried to run show-devs and looked the path /pci@1e,600000/SUNW,qlc@2 and supposed that physical installation for this adapter is ok.
But i don't know whether Solaris 10 SPARC included the required drivers for this adapter already or not. Pls show me how to get correct drivers for this adapter and how to test to look if it's working properly under Solaris 10 SPARC ?.
Thanks
Scott

Yes, it's part#X6767A supported for entry SPARC Sun Fire server Line.
I tried to seach drivers via qlogic.com and it leads me to the sunsolve.com for the download but the download is required to login with a service plan from Sun. So sun wanted to charge for these patches/drivers.
Do you know which site/link is free for Sun drivers in gerneral ?.
Thanks
Scott

Similar Messages

How do i combine single pages into documents with Adobe?

How do i combine single pages into documents with Adobe?

Hi zebideeplus,
Using Reader, you need to purchase subscription for Adobe PDF Pack to combine PDF files into single document.
Refer: Acrobat.com Help | Adobe PDF Pack FAQ
But, if you need to combine single pages, then it can be done with Adobe Acrobat only.
Let me know if you have further queries.
Regards,
Anubha

How to install Windows 8 on Macbook pro with retina display ?

Hi - How to install Windows 8 on Macbook pro with retina display ?
I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
I am not interested to install it through Parallels or Fusion. Plz guide.
Thanks !

OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp

How to install owb server-side software on UNIX Solaris (SPACR-64)?

Hi there,
How to install owb server-side software on UNIX Solaris (SPACR-64)?
I've read the install guide
and it mentions
3. Start the installer by entering the following at the prompt:
cd mount_point
./runInstaller
I don't have access to any graphical interface on the UNIX box e.g. x-windows nor any cd with the software, just the solaris software downloaded from web - does this include the runinstaller
and is the runisnatller just a command line interface?
I hoped I would be able to download the software from oracle website and then simply run the a setup scrip?
Is it possible to do this? Would I simply substitute cd mount_point to cd <directory I put software)
I've never ran oracle universall installer on UNIX before.
Many Thanks
Edited by: user575470 on Feb 15, 2009 7:54 AM
Edited by: user575470 on Feb 15, 2009 8:06 AM

Hi,
You can install the server-side software from the downloaded software.
You don't need the CD
You do need an X-windows client on your computer to connect to the server OR work directly on the server.
Without X-windows you cannot start the Oracle Universal Installer.
Maybe there is a command line installation, I have never used this.
I hope this helps.
Regards,
Emile

How to install adobe elements on a minibook with a 1200 x 600 resolution

how to install adobe elements on a minibook with a 1200 x 600 resolution?

You don't... that is below the minimum specifications
http://www.adobe.com/products/photoshop-premiere-elements/tech-specs.html

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

How to use 45W MagSafe 2 Power Adapter with cable management MagSafe 2 power port macbook air 2013

How to use 45W MagSafe 2 Power Adapter with cable management MagSafe 2 power port macbook air 2013 there's two plugs do I use both for the safety to work or I just one ? Thanks sorry new macbook air 2013 was given to my daughter fir her 18th bday 2 days ago by my brother

No, the one is just an extension cord, just use the 45W charger with its attached thin cord and connect the magnetic magsafe to to the connector on the back left of the macbook Air for use and charging it

How to Install and config Discover9.0.2 on Solaris?

I am finding the doc about HOW to install and config Discover9.0.2 on Solaris where Application 11i has been installed!
It's quite uegent.Hope you can help me.If possible,pls directly mail the docs to me:[email protected]
Thanks!

Hi,
Installaing Discover is quite easy but you need to configure to the database and apps also for which you need to create a repostory. So keep you database login and a seperate tablespace ready and start discover from oracle_discover_home/bin you will find options there for configuring repostory there.
kamalesh jk

Install ADF 11.1.2.1 on SOLARIS SPARC?

I want to install ADF 11.1.2.1 but only find 11.1.1.5 installer that Work with solaris sparc
What can i do??

Ahh sorry... My bad.
I am using firefox 10 which seems not supported yet.
I tried on IE 9 and chrome and it's working fine there.
I will try with firefox 4 and post here in case if I find any issue.

How to install Oracle Content Database Archive Adapter for SAP on windows

Hi,
I would like to install CDAA(Oracle Content Database Archive Adapter) on 32 bit and 64 bit windows. Will somebody point me to where i can download this from (if its not free i would like to try out trial version first) . If it depends upon other oracle components what is that i need to install additionally . And if you could provide links to all the required components, it would be great help.
Also if there is any demo from where i can see what all features CDAA support and how does it compare to other products say IBM commonstore etc , please let me know.
Thanks a lot ..
-Rohit

Can any body help me to say thet "How to install Oracle Applications 11i(11.5.10.2) on Windows 2003 R2 X64 bit ' . Hi,
I believe, 11i installation on Windows 2003 X64 is not fully supported.
what is your os version:
if it is windows 2003 32 bit, then it is supported on X86-64 servers for both database and application tiers
If it is windows 2003 64 bit, then only datatabase tier is supported on x86-64 servers
Have a look at the following note
Frequently Asked Questions: Oracle E-Business Suite Support on x86-64 Doc ID: 343917.1
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=343917.1

How to install microsoft hosted virtual network adapter

I have a HP 20- A225IN windows 8.1 All in one PC
I accidentally uninstall the Microsoft hosted virtual network adapter from Network Adapters under Device Manager.
please tell me how to install this adapter again?

I have a video that covers the steps to install the Microsoft Loopback Adapter in Windows 7. Hope this helps...
http://www.youtube.com/watch?v=R9674zGHxrE
Guides and tutorials, visit
ITGeared.com.

How to install 11.5.10 on VMWare with Windows 2003 Server?

Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
Jags

Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
Jags

How to install photoshop CS6 in silent mode with a serial number on Win7?

I have a serial number. Now I have to install photoshop CS6 in silent mode with this serial number in command line. How?

Check the deployment guides in the developer center.
Mylenium

How to install windows 8.1 64 bit with a DVD

has anyone found a workaround to install windows 8.1 64 bit with a retail DVD?

Gotcha!!
I am done with mounting a secondary HDD (thanks to ifixit) and installing Windows 8 Pro 64 bit on it without a worry. Charm, charm!!
Boot Camp 5 guide prescribes all needed steps and when read and used correctly, installation must be an easy task. And all the existing apple hardwares work so good in the Windows environment too.
I am going to help out a friend of mine in doing a similar thing on his mac too. If you got specific questions, please do shoot up here and i should be able to get a reply to it (if at all).
Thanks everyone.
~ Narey

How to install JDev 11.1.1.6 with a older Jdev 11g?

I had a JDeveloper 11.1.1.5 with SOA extension installed already in C:\Oracle\Middleware folder (windows7),
now I plan to install JDeveloper 11.1.1.6 with SOA extension but still keep the JDeveloper 11.1.1.5.
where should I install the JDeveloper 11.1.1.6? Thanks.

Install to new middleware home(for example: C:\Oracle\Middleware2).
Dario

How to install a single 2Gb FC adapter with Solaris 10 SPARC ?.

Similar Messages

Maybe you are looking for