How to install a SSD HD in mid 2011 imac

I want to install a SSD (preferably 512 GB) in my mid 2011 27in iMac. The local Apple Authorized Service Center tech said, "Apple has not released the mounting kit needed for correctly installing the drives"
It's hard for me to believe that Apple would not think that people would want to upgrade their Macs after purchase. I'm not one for "hack" jobs and I heard that without the proper connectors the fan will go into overdrive and I don't want that.

I ended up going with Other World Computing. http://eshop.macsales.com/shop/turnkey/iMac
Got a 480 SSD, sent and received my iMac in about 6 business days. Runs GREAT! Now using my 1TB drive for storage and the SSD to run the OS and Apps. A little expensive but well worth it to me.

Similar Messages

Is there a way to run a external ssd with my mid 2011 iMac hdd in a raid configuration and basically have a fusion drive

is there a way to run a external ssd with my mid 2011 iMac hdd in a raid configuration and basically have a fusion drive

A Fusion Drive is not a RAID; it's a CoreStorage logical volume group. While it's technically possible to do as you suggest, there would be little or no benefit from it.

Re-Installing Snow Leopard on a mid 2011 iMac

I have accidentally wiped the hard drive of a mid 2011 imac 27" there was no install DVD provided for this machine and a retail Snow Leopard disk will not boot, apparently I need 10.6.8 and the retail disk is only 10.6.3 is there any solution to this dilemma?

The machines (we have more then one) all came with SL but no install disks. When I boot with cmd-R it comes up with a globe icon and message - apple.com/support - 6002F. I am now convinced that these machines were so close to the Lion release and were probably intended for Lion but were shipped with SL. I have now tried everthing including Lion install from USB recovery stick created an another SL to Lion machine and this works to the point where after downloading all 3GB of Lion it just goes back to the beginning again! I tried 3 times - good thing we have fast broadband and it failed every time! I then tried restoring a SL and even a Lion clone from another similar Mac but kernel panic every time, tomorrow I will try the retail "Lion on USB" option but it looks like its off for repair as far as this MAC is concerned.

Can I install a SSD in my mid 2010 iMac

Wondering if this can be done
Also I have 4 ram slots with 2gb in two of them can I install two sticks of 4gb in the empty ones without impacting performance

Wondering if this can be done
Yes.
http://www.ifixit.com/Device/iMac_Intel
Also I have 4 ram slots with 2gb in two of them can I install two sticks of 4gb in the empty ones without impacting performance
Yes. Recommended in pairs. So 2x2GB + 2x4GB SO DIMMS for a total of 12 would be fine.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27

How can i play xbox on my mid 2011 imac

is there a video input for thunderbolt so i can play xbox on my imac

You can't. Thunderbolt IS a video input but Xbox doesn't export thunderbolt compliant video. Target display mode is intended to be used with another Mac http://support.apple.com/kb/ht3924

Exactly which mid 2011 iMacs are Air Play compatible?

How can I find out exactly which "mid 2011" iMacs are Air Play compatible? Mine was purchased July 29 2011. 2.7 GHz Intel Core i5.

Make sure your tv is updated to the 5.0.2 software level and you should see these options in System Preferences > Displays. Check Show Mirror option in menubar and you'll see this icon:

I can't install Mavericks on the new SSD in my mid-2010 iMac

I recently had my old 500 GB hard drive swapped out for a new 480 GB SSD on my mid-2010 iMac. I made a flash drive into an OSX Mavericks installer per instructions from online tutorials. With the flash drive inserted, I formatted the new SSD in disk utility and then selected it to install Mavericks. However, I can't complete the installation, which is supposed to take 26 minutes, because the screen goes black midway through. I tried this twice and the second time moved the mouse periodically to make sure that the computer wasn't going to sleep. Same thing happened. Installer says that the installation can be recovered, but it will not complete installation. Any advice much appreciated!

Wondering if this can be done
Yes.
http://www.ifixit.com/Device/iMac_Intel
Also I have 4 ram slots with 2gb in two of them can I install two sticks of 4gb in the empty ones without impacting performance
Yes. Recommended in pairs. So 2x2GB + 2x4GB SO DIMMS for a total of 12 would be fine.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27

Where did 30GB of unused space on my SSD main drive go? I have a mid 2011 iMac that until yesterday had just 54GB of space occupied on the primary drive. I imported 45 minutes of video from an SD card. Could that have used up the space?

Where did 30GB of unused space on my SSD main drive go? I have a mid 2011 iMac that until yesterday had just 54GB of space occupied on the primary drive. I imported 45 minutes of video from an SD card. Could that have used up the space?

I added an SSD to my 27" 2011 iMac. Although Sahidus is absolutely correct, it is much easier to add an SSD replacing the optical drive, it wasn't that bad to add it using an entirely seperate cable using SATA-III. To me it is worth the extra hassle to install a SATA-III SSD. This is where you are going to get maximum performance.
Although it appears complicated, if you go slow, the procedure to install an SSD drive isn't too bad. It takes at most 3 hours, as long as you are prepared and have all the parts and tools.
http://www.btobey.com/learn/imac-ssd-install.php
This describes how I did it. Now I get awesome data performance from my iMac!
I think the 21.5" may be more difficult to find where to place the SSD. But im sure it is possible. Just be creative.

How do I restore my 27" mid-2011 iMac EXACTLY the way it was after hard disk replacement?

Hi all.
Recently received an email from Apple saying that the 1TB Seagate hard drive in my 27" mid-2011 iMac is apt to fail anytime. Apparently they used some bad hard drives in the mid-2011 27" iMacs which are problematic so they're offering me a free replacement to a brand new hard drive. I'll be sending in my iMac for the replacement sometime in the next few days.
In preparation for it, I've backed up my entire system using Time Machine into an external harddrive. The backup is up to date & includes all system files. I've also made a Lion install disk on an 8GB USB flash/pen drive using Carbon Copy Cloner.
My question is: When I get my iMac back after the hard disk replacement, will I be able to restore my iMac to EXACTLY the way it was before the replacement using the Time Machine backup & the Lion install disk that I've prepared? When I mean EXACTLY, I do mean EXACTLY, e.g I don't have to re-install all the programs I have, my settings for the programs I have will stay intact, everything is where it should be etc...i.e EXACTLY the way my iMac is right now.
If yes, how do I do it? I've read Pondini's guide: http://pondini.org/TM/14.html
However it is less than clear on certain points, e.g in my case, which one do I have to use to restore my system to the way it was...the Time Machine backups I have on the external HDD or the Lion install disk that I made using Carbon Copy Cloner? And how do I go about doing the restore?
I'd appreciate any & all help given. Thanks in advance!

daniirwan wrote:
baltwo: Thanks for your input! I didn't think of wiping the old HDD before sending it in for the replacement..all those sensitive user data! One question: What's a FWHD?
Already answered. Just note that FW is much faster than USB. See http://help.bombich.com/kb/troubleshooting/how-long-should-the-clone-or-backup-t ake for details.
I already have CCC installed so I'll probably try it out. Are the steps outline here the one that I should do to restore the CCC clone when I get my Mac with the new HDD back? See: http://help.bombich.com/kb/overview/restoring-data-from-your-backup#full_volume_ restore
Yes.
Another question: while I'm booted on the backup/clone, and just after I've wiped the old HDD, how do I reinstall the OS to create a generic user account? Will I have to use a Lion install USB disk?
No. IIRC (if I remember correctly), you can either use a saved Lion installer (hopefully it exists on your backup/clone) or use the Recovery HD. If you have the USB stick w/Lion installer on it, use that.

How do I migrate data from my 2003 iMac to my mid-2011 iMac?

Hi All,
I have a 2003 iMac and I want to migrate the iTunes, iPhoto, etc DBs to my new mid-2011 iMac. The 2003 iMac is the last one before they switched to the intel chip. It's Mac OS is version 10.5.4. That's as late as I can get it as they quit supporting the old chip after that.
I found a vid on mac-to-mac file migration online. It said to connect the two computers via firewire cable (done), start the new computer (done), start the old computer while holding down the T-key (done), and the old computer's hard drive will show up on the new computer finder window (did happen). Then it says to start Migration Assistant on the new computer (done), and follow directions. That's where I run into a problem. The Migration Assistant says "Looking for other computers" and it never finds the old iMac even though the old iMac's hard drive is visible in the new iMac's finder window. Note that I can click down through directories on the old iMac in the new iMac's finder window.
Any suggestions you can offer would be greatly appreciated.
Thanks much!

Your old machine may too old for Migration Assistant to work. In that case your best bet is to set up the old machine in Target Disk Mode and then drag and drop your files to the new machine. You should only migrate data files, if you have applications on the old machine these should be manually installed on the new machine. If any of the old machine's apps are PPC (Power PC) based these will not run in Lion and will need to be upgraded or replaced prior to installing on the new machine. You can check what apps are PPC based by opening System Profiler (Applications - Utilities - System Profiler), click Applications on the left and then look in the Kind column. Applications that will run in Lion OK are Intel & Universal apps.

Unable to install Yosemite on mid 2011 iMac 27"

OK, so I have tried to install Yosemite on this mid 2011 iMac for two days now and I get the exact same error message every time:
An error occured when extracting files from the archive AdditionalSpeechVoices.pkg. Abort the installation and reboot.
I have formatted the harddrive, reinstalled the original OS using the Restore via Internet option (the Mac works perfectly with Mac OS X 10.7.X) and then I try to upgrade to Yosemite via App Store and the error is back.
Any ideas regarding what might cause this problem?
TIA

If you find you'll need to replace a faulty module(s) I recommend you do so from Crucial.com which has an excellent reputation for providing top quality and compatible memory modules for Macs. They are guaranteed to work and are warranted. Otherworldcomputing.com is another recognized, reliable source for Mac memory.

My Mid-2011 iMac with pre-installed Lion can't load AHT (Apple Hardware Test) over internet

I have a Mid-2011 iMac (3.4GHz) of which Apple's Support document for the Apple Hardware Test (http://support.apple.com/kb/ht1509) says:
Some Macintosh computers that shipped with OS X Lion support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT.
Well, this doesn't work for me. My Mac is on a DHCP-supporting router which has constant internet connection. Yet, when I turn off the Mac and then on again, holding the D key down even before the screen turns on, the Mac does indeed react to this key as it's then turning the screen on and taking another about half minute before it continues with the boot process along with showing the Mac symbol. Without the D, the Mac symbol comes up quickly.
So, it appears that the iMac is indeed trying to get AHT over the internet. Just that it doesn't succeed in it, and probably timing out after a while.
Any suggestions how to fix this?

Re
extract from kb article
PPPoE (where there is no router handling the PPPoE connection)
No
No
Captive-Networks (where you click an "Agree" button to access the Internet)
Yes
No
Proxies (where specific proxy servers must be configured in network preferences)
No
No
Certificate-based authentication / 802.1x
No
No
try check if you are in that case for your internet acces ?
could be a firewall problem too , if is possible try desable firewall ( or any internet filter )
no you can not see a wifi selection if you are wired ( using cable )
by the way D key for AHT need to be pressed AFTER start up sound , and hold at min one minute
HTH
Pierre

How do I update firmware for mid 2011 iMac running Yosemite?

I tried the link in the Apple support pages, but it told me I need Lion to install it. I bought the computer used. It came with Mavericks and I updated to Yosemite. I don't have Lion or any way (or desire to) install it.

There is no update for the mid-2011 iMac firmware that will fix the fans running at high speed.
Only the OEM (original equipment manufacturer) Apple hard drives had the proprietary firmware designed to properly monitor the hard drive temperature.
So you have several possible solutions:
1. If the computer was sold to you with a warranty, rather than "AS IS", my first choice would be to force the seller to restore the computer to the condition it was represented to be in when you purchased it, with an OEM Apple 500GB drive that does not cause the fan problem. If they cannot or will not correct the problem, make them take it back and refund your money. Consumer advocates such as the Better Business Bureau can help you prepare a formal complaint against the seller, and perhaps lead to a successful resolution through arbitration, without hiring an attorney and filing a lawsuit.
2. If you bought the computer "AS IS", you'll have to attempt to repair the problem yourself:
A) Locate an exact replacement for the original OEM Apple hard drive with the proper firmware and install it on your own;
B) Purchase a 'compatibility kit'. OtherWorldComputing www.macsales.com reverse-engineered a solution to the problem and sells a short cable with an external temperature sensor for the hard drive that can be used successfully with non-OEM drives. http://eshop.macsales.com/item/OWC/DIDIMACHDD11/
They also sell the sensor cable with a toolkit that can be used to disassemble and install the cable. http://eshop.macsales.com/item/OWC/DIYIMACHDD11/
C) Try the fan control program mentioned in earlier replies.

HT201457 I have a mid 2011 iMac and have installed windows 8.1 on it I costantly get system thread not handled and kernel security check failure and the Mac restarts

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

Mid-2011 iMac won't boot Win 8.1 (BC) w/ ACD 30 attached

I have a 27" mid-2011 iMac Core i7 with two external displays, an ACD 30" and a 20" HP. I spent a great deal of time watching Win 8.1 in a reboot loop after install (Apple Drivers installed fine), sometimes with vertical lines down the ACD 30 (nothing on the HP). (I didnt expect Win to notice the more than one DisplayPort screen.) Finally I disconnected the displays and I booted into 8.1 fine.
IS this a thing? Others share this experience?
Thats not the end of my Boot Camp woes, but that's all tied to this issue.
BP

Can you provide details on how each these displays are connected?
From iMac (27-inch, Mid 2011) - Technical Specifications, you have two TB ports, which can support DP connections.
Please also see
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ) - Apple Support
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support (this not directly related).

How to install a SSD HD in mid 2011 imac

Similar Messages

Maybe you are looking for