How to install a tcp/ip printer

How can I install a tcp/ip printer on my powerbook G4

What is the make/model of this printer? Does it have a built in ethernet print server?
In general terms - you open the Printer Setup Utility, click to Add a new printer, select "IP Printing", select the type of IP Printing protocol you want to use, enter the IP address of the print server, and then select the printer driver.

Similar Messages

How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2?

How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2? Several attempts with various downloads from Apple and Samsung sites have failed. Any help is higkly appreciated. Thanks in advance!

Thias is what I find in system information:
Samsung Scanner:
Version:          2.01.12
Erhalten von:          Apple
Zuletzt geändert:          10.04.14 21:20
Art:          Universal
64-Bit (Intel):          Ja
Signiert von:          Software Signing, Apple Code Signing Certification Authority, Apple Root CA
Ort:          /Library/Image Capture/Devices/Samsung Scanner.app
Informationen:          Copyright (C) 2013 Samsung Electronics Co., Ltd.

How to install samsung scx-4200 printer/scanner on yosemite?

How to install samsung scx-4200 printer/scanner on yosemite?
iam not able to install the drivers for samsung scx-4200 printer/scanner
is there any method for wifi print from my mac air to samsung scx-4200 printer/scanner

Try SpliX, it works ok.

How to delete unwanted TCP/IP Printer Ports

Windows 7 64bit; I have created, in error, one TCP/IP Printer Port which I would like to delete to keep the Ports clean of rubish, but I am unable to find how to do so.
Can anyone help?
Nevio

You get the 'port is in use' error message if the port is currently assigned to a printer. It has nothing to do with print spooler - it's just that you can't delete a port that is already assigned to a printer.
1. When you open properties and go to the 'Ports' tab, you have your printers listed with headings - Port, Description, Printer.
2. Identify the printer using the port that you want to delete, exit out of printer properties window and delete the printer.
3. Right Click on any of the remaining listed printers and select 'Properties' (if there is none left then you craft create a fake printer).
4. Click the Ports tab.
5. Select the port and click “Delete port".
6. Check any available port and exit out of 'properties' window.
The above will work in many cases but unfortunately not all. You may well find one of a couple of problems. One symptom is that having removed printer(s) and exited from "Devices and Printers" - if you re-enter "Devices
and Printers" the printers have returned. Another symptom is that Windows will not let you delete the port as described above.
There are three things I have encountered which can need fixing. One is that there are print jobs queued on the printer. If this job can be cancelled that fixes that, otherwise stop and re-start
the print spooler. the third is the "in use" message mentioned below.
The second situation is that a program - in my case foxit reader - is somehow associated with the printer you are trying to remove when you look through the full list of Ports. I had to un-install
Foxit and only re-install it after the printer situation was resolved.
Thirdly you may have to go into "Programs and Features" and un-install the software associated with the printer.

How to install Epson Stylus C88 printer on 10.9.3?

How do I install Epson Stylus C88+ printer? Is it supported by 10.9.3?

Hi Janet ...
There is a driver available for v10.9 Mavericks to download here > http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58602&BV_UseBVCooki e=yes&infoType=Downloads&platform=OSF_M_X9
After you download the driver, open System Preferences > Printes & Scanners then select the Print tab.
Then click ➕ to install the printer.

HT1338 how to install hp jet 1000 printer software on my mac

how i can i install hp jet 1000 printer software, connect it to my mac book air and get it to operate?

If your printer were AirPrint compatible, this would explain how to do it:
AirPrint basics
But I believe your printer is not one of those listed in the article as AirPrint compatible. So you'll have to visit HP's website for help.

How to install HP Deskjet 990cxi printer on laptop...

I have spent two days trying to install my excellent HP Deskjet 990cxi on my new laptop running Win7 Home Premium on an AMD 64-bit processor. I want to do two things:
to set the printer up to run direct from a USB port on my laptop. Having done this, I then want
to set the printer up on BT Home Hub Type 2A, connected through the hub's USB, as a network computer.
So far under windows, this has proved a huge problem. It seems that the printer settings file is in 32-bit, but in the attempt to install the printer through the Windows "add printer" in Devices and Printers, and after a Windows update on the program to find Deskjet 990c, I run into a brick wall with the printer failing to install. I get the following message: "Printer driver was not installed. Access is denied ". Yet I am loading the printer drivers as Administrator.
By contrast, I also run Ubuntu 11.04 linux on this computer under Windows.
Ubuntu loaded the 990cxi drivers in an instant when it was connected via USB to the laptop; and more importantly,
Ubuntu set the printer us as a network printer running off the BT Home Hub type 2A and it worked perfectly. I even tested it by sending a graphics file from my garden to the printer indoors and the quality was perfect.
So the observation is this: If Ubuntu can load both printer settings on the same laptop, why is Windows 7 such a trial? Can HP or BT Customer Service do anything about this?

This might help:
I had huge problems with my HP Laserjet 5M on getting a Homehub 3.0 - I'd used a Sky router before and had similar problems at the start with that. The BT Homehub is a very poor piece of equipment and the BT support staff (in India) are absolutely useless, they try to help and got me to allow them to remotely go on my screen and control my computer - so I could see exactly what they were doing - the computer equivalent of a bogbrush to a blocked bog - not impressive and 2 days and over 2 hours on the phone got me nowhere.
Finally found the instructions - or similar I'd used some years ago on the Sky hub:
Instructions on how to set a LaserJet 5M for IP address use on a network. Other printers models may may be similar.
         This is necessary on Mac OSX 10.6+ due to the loss of Appletalk support which made it much easier to configure with Default.
         • Press Menu, repeatedly, the following messages appears on the control panel: HP MIO MENU
         • Press ITEM. - CFG NETWORK=NO* will appear.
         • Press the PLUS button once. - CFG NETWORK=YES* will appear.
         • Press SELECT .
         • Press ITEM repeatedly until CFG TCP/IP=NO* appears.
         • Press the PLUS button. CFG TCP/IP=YES* will appear.
         • Press SELECT.
         For DHCP based IP addressing:
         • Press ITEM until BOOTP=YES* appears.
         • When using BootP or DHCP, keep the setting BOOTP=YES*. If set to BOOTP=NO*, then press the PLUS to change it to BOOTP=YES.
         • Press SELECT to set, then GO.
         • The BootP or DHCP server will configure the TCP/IP parameters on the HP Jetdirect.
         • No other TCP/IP configuring is necessary.
         • Print a self-test page to verify the IP settings.
         • Press Menu until TEST MENU appears.
         • Press Item until PRINT SELF TEST is displayed.
         • Press SELECT .
         • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
         When set for BootP the lower right corner of the test page display something like:
         TCP/IP STATUS: READY
         HOST NAME: 192.168.2.10
         CONFIG BY RARP/BOOTP
         IP ADDRESS: 192.168.2.10
         SUBNET MASK: 255.255.255.0
         DEF. GATEWAY 192.168.2.1
         SYSLOG SERVER: NOT SPECIFIED
         IDLE TIMEOUT (SECONDS): 90
         SNMP GET CMTY NAME: ALL
         SNMP SET CMTY NAME: NONE
         BOOTP/DHCP SERVER: 0.0.0.0
         If you want to set the printer to a static IP address:
ALSO if you do NOT have a JetDirect follow the instructions below:
         • Press ITEM until BOOTP=YES* appears.
         • Press the PLUS button. BOOTP=NO will appear.
         • Press ITEM . IP BYTE 1=192 will appear.
         • Press the PLUS or MINUS button until the value of the first byte of the IP address appears on the control-panel display.
         • Press SELECT to set that byte.
         • Press ITEM to continue.
         • Repeat to configure the remaining bytes of the IP address you wan to set. e.g., IP BYTE 2=168 , IP BYTE 3=2, IP BYTE 1=10) = 192.168.2.10
         • Repeat Steps to configure the subnet mask bytes (SM BYTE 1=255, SM BYTE 2=255, SM BYTE 3=255 , SM BYTE 4=0) = 255.255.255.0
         • Repeat Steps to configure the syslog server IP address (LG BYTE 1=0,LG BYTE 2=0, LG BYTE 3=0, LG BYTE 4=0) = 0.0.0.0 (Mine had the BYTE 4=1 and only when I reset it to BYTE 4=0 did everything go correctly).
         • You can leave this at 0.0.0.0 if not needed.
         • Repeat Steps to configure the default gateway (GW BYTE 1=192, GW BYTE 2=168, GW BYTE 3=2, GW BYTE 4=1) = 192.168.2.1 (often it is automatically set by your router and you do not have to do anything other than check this is correct).
         • Configure the timeout (TIMEOUT=90). You can leave the default at 90 seconds.
         • Press GO .
         • Print a self-test page to verify the IP settings.
         • Press Menu until TEST MENU appears.
         • Press Item until PRINT SELF TEST is displayed.
         • Press SELECT .
         • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
         When set to a static value it looks something like:
         TCP/IP STATUS: READY
         CONFIG BY FRONT PANEL/TELNET
         IP ADDRESS: 192.168.2.10
         SUBNET MASK: 255.255.255.0
         DEF. GATEWAY 192.168.2.1
         SYSLOG SERVER: 0.0.0.0
         IDLE TIMEOUT (SECONDS): 90
         Add the printer.
         • To add the printer on Mac OSX 10.6+, open the Printer & Fax Preference panel.
         • Unlock if locked.
         • Press + to add.
         • Select HP JetDirect - Socket from the Protocol pulldown menu.
BUT if you do not have a JetDirect then click the Line Printer Daemon – LPD option instead.
         • In the address field, enter the IP address from the Test Page printout.
         • Print Using should set itself to LaserJet 5M from the built-in drivers in Mac OSX 10.6+ within a few seconds if it can communicate with the printer.
         • Type in a name you want to give the printer. It will use its IP Address as the name if nothing is entered.
         • Type in a location if you desire. Not sure where this shows up.
         • Press Add.
         • The Installable Options are determined and the printer is added.
NOTE – ref users without a JetDirect:
                  • If you get a message telling you the printer is busy – you have probably indicated JetDirect or Internet Printing Protocol - IPP option in the Protocol pulldown menu by mistake – delete the printer and go back and reset it with the Line Printer Daemon – LPD option instead.
Good luck.

How to install an Officejet 8100 printer on a hybrid network?

Hi,
I want to buy an Officejet 8100 printer to use on my home network. My desktop PC has Windows 7 64 bits and is connected to a wireless router through an Ethernet cable. I have also a Windows 7 64 bits notebook, which access the home network through wi-fi. The desktop is near both the router and the printer.
After reading the 8100 installation instructions, I plan to do the following:
1) Install the 8100 hardware, cartridges, etc.
2) Connect the 8100 to the router by using an Ethernet cable.
3) Install the 8100 drivers and software on my desktop PC, by folllowing the steps on "Wired (Ethernet) network" installation instructions.
4) Install the 8100 drivers and software on my notebook by folllowing the steps on "Wireless network" installation instructions.
Is that OK? Is that the correct method of installing the Officejet 8100 on a hybrid network?
Cheers!
This question was solved.
View Solution.

You can connect it either way. You don't have to use an ethernet cable to install the printer. You may be prompted to temporarly connect a USB cable to transfer wireless settings. The document link I provided has pretty detailed instructions on how to connect using either method
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

How to install Adobe as a printer in control panel?

I just changed computers. On my old computer, I was able to select Adobe in the printer list to save a document or excel file as a PDF file. However, on my new computer, I am not able to figure out how to get Adobe installed in the printer list. I'm running Windows XP Pro and cleanly installed Adobe Reader 9.0. I have searched the support and forums on this site but am unable to find my answer.
Any guidance will be most appreciated.
Teresa

>I am not able to figure out how to get Adobe installed in the printer list
Easy. Install Adobe Acrobat. Reader doesn't come with the PDF printer.

How to install wireless HP Officejet printer on my Macbook air?

Hi there,
I just bought a MacBook Air for college and I want to install wireless printing.
When we installed printing (non-wireless) on my other laptop we inerted a disk into it to install the printer.
However, I can't insert a disk into my Macbook so I am confused on how I can install wireless printing! Can anybody help me?
I appreciate all your help! Thanks!

You don't need the disc.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

How to install hp laserjet m1213nf printer in mac os x 10.10.1

Dear,
I need your help please.
I have HP Laserjet M1213nf MFP printer and install in MAC OS X YOSEMITE v10.10.1.
but i have no drivers for this printer.
I did check drivers in HP official site and apple store,but it also did not there.
I have Downloded drivers from Outside,but it's not working.
So, please tell me, how can i install the printer in Mac OS X Yosemite 10.10.1 ????
Thanks & Regards,

Hi kishan143,
As i understand you are unable to download the drivers for laserjet printer. Please click on the link below and download and install the printer.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r...
Please go ahead and download and install and incase if you require any further issues u can get back to us and we will assist you in resolving the issue.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"
Regards
Aneesh
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How to install hp laserjet m1217nfw printer driver and software

I move my printer to another place and want to set up a wireless connection, I install the cd drive and follow the instructions, after that my printe stock in initializing., then I uninstall the software and try to install again, but it does not let me to install the software, now I cannot print and cannot install software, how I need to do now? please help me, thanks

Hailun, welcome to the forum.
Here is a guide to help you solve your problem. Read it carefully and follow the instructions step by step.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to Install a parallel port printer to usb port of Pavilion dv5 Notebook

In trying to install my HP DeskJet 610C Parallel Port printer to my HP Pavilion dv5-1235dx Notebook PC with Windows Vista Home Premium 64-bit, I followed instructions given by HP Support some two years back.
I connected up the two units through a Parallel-to-USB ports cable. The PC loaded and confirmed suitable driver. (Following advice from sites on the Internet, I have made repeated attempts to carefully install the printer, but to no avail).
Upon my issuing the Print instruction, the printer invariably prints two copies of what appears to be 'gibberish' in two lines at the start of the sheet. Thereafter it picks up and then ejects 6-8 sheets of blank paper.
Any help in resolving this anomalous situation will be be most welcome and much appreciated.
I might add that the printer works normally when connected in parallel to an older, Compaq Armada 1750 Notebook (XP OS). In this instance too, the Parrallel/USB worked as in the Pavilion PC, above.
This question was solved.
View Solution.

Hi khalidem,
Sounds like you have a communication problem with the printer cables. Have you tried a new parallel to USB cable or adapter?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How to install a second identical printer on network

I have a HP 3600 already installed on my Windows Server 2003 network and need to install a second HP 3600 but not sure how. Can someone please help me with this?
roy

Easy peasy. Check this link:
http://www.apple.com/support/powermac/doityourself/storage.html
and download the PDF. the instructions are the same no matter the capacity of the drive. Instructions are also in your owner's manual.
Good luck!
-K
(if this answered your question, be sure to award points!)

How to install hp deskjet 920c printer?

I was trying to install this printer, but the macbook doesn't take the software

Is this what you're trying to install? This is the latest Mac driver for the 920C. Note that it was last updated in 2007 for OS X 10.5, and there may be no version of it that's compatible with OS X 10.6 or later. If that's the case, you may need to replace the 920C with a more modern printer.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=33996&prodTypeId=18972&prodSeriesId=28856&swLang=8&taskId=135&swEnvO ID=4019

How to install a tcp/ip printer

Similar Messages

Maybe you are looking for