How to install Active Directory Client on Windows 8.1 Pro
Hello,
I like to install the Active Directory client on Widows 8.1 Pro. I have tried installing RSAT (Remote Server Admin Tools for Windows 8.1, but when I run the setup program it says the Windows Update Standalone
Installer, the update is not applicable to your computer. I am running this Windows8.1-KB2693643-x86.msu and downloaded it from here.
http://www.microsoft.com/en-us/download/details.aspx?id=39296
So, how do I
get this installed?
Thanks
Paul
Hi,
Remote Server Administration Tools for Windows 8.1 is available in the following languages: cs-CZ, de-DE, en-US, es-ES, fr-FR, hu-HU, it-IT, ja-JP, ko-KR, nl-NL, pl-PL, pt-BR, pt-PT, ru-RU, sv-SE, tr-TR, zh-CN, zh-HK, and zh-TW. If the system UI language
of your Windows 8.1 operating system does not match any of the available RSAT languages, you must first install a Windows 8.1 Language Pack for a language that is supported by RSAT, and then try installing Remote Server Administration Tools for Windows 8.1
again.
Please check your system version (64 bit or 32 bit), and download the property one:
How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system
http://support.microsoft.com/kb/827218
Kate Li
TechNet Community Support
Similar Messages
-
How to install Data Quality Client on Windows when the Servers are on AIX
I have installed ODI, ODI DP and DQ Servers on an AIX machine. However, Oracle Data Quality Client is an Windows only component. How do i install it? When I use the software of ODI, for Windows platform,I get the following error when i try to connect.
An unexpected error has occurred. Please refer this information to Trillium Software support.
Description: invalid command name "::com::avellino::metabase::authenticate"
File: ..\include\ExecutionContextHandler.h
Line: 326
Stack:
invalid command name "::com::avellino::metabase::authenticate"
while executing
"::com::avellino::metabase::authenticate madmin 303f4450-8ce1-436f-9a16-54fae4d8a4cf ::com::trilliumsoftware::tssauto::pwd_answer"
invoked from within
"remote0 read"Hi,
We are hitting same issue (Metabase Manager from windows) to ODQ server on Solaris and event viewer in windows server showing exactly same message .
Any luck or pointer ?
Atul Kumar
http://onlineAppsDBA.com -
I have windows server 2012 R2 and install active directory
My question is I install active directory in windows server 2012 R2 and create Group Policy. ( These set-up is only for test)
Have not registered domain only install active directory to test.
So the problem is when I created Group policy for my user and put software restriction policy but its affected to my administrator accounts too, No when I open VMware (install Virtual Machine windows XP) and start os then its shows you can not user this
software as you restricted from installing software (Something like that don't know exact Error). I could not start installed Virtual Machine.
Please give me a solution for this.
This is the setup for a test use only so their not big environment connect with my pc.
Thanks in advance.
Regards,
KrunalHi,
The following article is talking about creating and managing Group Policy on a Windows Server 2012:
http://www.thomas-krenn.com/en/wiki/Creating_and_managing_a_Group_Policy_on_a_Windows_2012_Server
As Darren Blanchard mentioned, if you want to apply the GPO, you could link it to an OU that contain the computer or user.
Group Policy Overview
http://technet.microsoft.com/en-us/library/hh831791.aspx
Please feel free to let us know if you need further assistance.
Regards.
Vivian Wang -
I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
I have uninstalled ADDC but i still can't login on SQL server 2008r2.
please help me. it is very very disaster!
I think is loss account SQL server 2008r2!Hello,
I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
Regards,
Elvis Long
TechNet Community Support -
Error when trying to install Active Directory Domain Services role
I am running Server 2012 r2 standard on a physical server. When I try to install active directory from the add roles and features wizard, I get this error:
"The request to add or remove features on the specified server failed. Installation of one or more roles, role services, or features failed. The referenced assembly could not be found. Error: 0x80073701"
I have already tried running these commands:
sfc /scannow
dism /online /cleanup-image /restorehealth
I have all of the latest updates from windows update.
Any idea what might be causing this?
Thanks!Hi drwebster93,
This error most times occur because there have some language pack corrupted, please first try to remove some useless language, you can refer the following KB to remove language
pack.
Add and Remove Language Packs Offline Using DISM
https://technet.microsoft.com/en-us/library/hh824893.aspx
If above method please perform the following action then monitor the issue again.
Confirm you have disabled "Specify settings for optional component installation and component repair" group policy.
Try to use PowerShell cmdlet: C:\Users\Administrator> Install-WindowsFeature –Name AD-Domain-Services
Run the
sfc /scannow cmdlet and Uninstall Antivirus Software.
More information:
How to resolve the error 0x80073701(ERROR_SXS_ASSEMBLY_MISSING) when you are installing a service pack or update
http://blogs.technet.com/b/asiasupp/archive/2011/06/20/how-to-resolve-the-error-0x80073701-error-sxs-assembly-missing-when-you-are-installing-a-service-pack-or-hotfix.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
New Server 2012 install - Active Directory not working properly
We recently converted from 2003 to 2012. Our 2012 R2 server seems to be running fine. We did a DCPROMO on the OLD 2003 DC just fine but now there are all sorts of odd errors (Sharepoint can't authenticate users, Can't run Exchange 2013 on another 2012 server
because it can't find AD, etc.)
on the DC we have a Group Policy error 1096. "Group Policy Object LDAP://CN=User,cn={2B476B3E-2749-4B1B-8EC1-F5672A66F94F},cn=policies,cn=system,DC=mydom,DC=local\\mydom.local\SysVol\mydom.local\Policies\{2B476B3E-2749-4B1B-8EC1-F5672A66F94F}\User\registry.pol"
So far I haven't found anything on how to fix this (and the AD itself.) There are some errors in the DCDIAG log, too:
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\ISD-DC1\netlogon)
[ISD-DC1] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
Any suggestions how we can fix these errors are greatly appreciated!Hi,
Did you migrate the Active Directory from Windows server 2003 to Windows server 2012?
Please refer to this article:
https://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Regards.
Vivian Wang -
Cannot install Active Directory Domain Services on Server 2012 R2
Hi all,
I'm having some trouble installing the AD DS role onto my virtual server. I keep getting "The request to add or remove features on the specified server failed. The operation cannot be completed because the server that you specified requires a restart."
After the install fails the DFS Namespace service stops and I cannot refresh the server manager.
This server is currently dishing out DHCP and also has VIPRE anti virus on it.
I did a ton of research on the problem but can not find anything specific to this issue.
Any help would be greatly appreciated. Thanks!Hi Dave,
I ran the DISM.EXE/Online/Cleanup-image/Restorehealth command and Windows did not find any corruption.
I then attempted to install active directory and was greeted with the same errors as I expressed in my first post.
I ran the DISM.EXE/Online/Cleanup-image/Restorehealth command again and windows found corruption and fixed the corruption.
I tried to install active directory again (was able to refresh the server manager at this point and did not need to reboot the server to attempt another install, maybe that is the corruption windows fixed?) but it failed.... with the same errors I always
get.
The active directory install always freezes on 64% and then bombs out.
I shutdown the VM and rebooted... before the login screen Windows attempts to configure updates but fails. Could this be the cause?
Thank you,
-Matt -
How to Takes Active directory backup and Restore in different Hardware
Hi
how to takes Active directory backup and Restore in different Hardware in Windows server 2003 R2 standard Edition.You can give a look to that: https://support.microsoft.com/kb/249694/?wa=wsignin1.0
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
How to install Cisco Device Manger on Window 7
Hello
Is Cisco device manager supported on windows 7 ?
If yes how to install Cisco Device Manger on Window 7?
Please advise
Thanks
Chetan RYou can install the latest DCNM 5.x for support, please see here:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/release/notes/dcnm_5_1_relnotes.html#wp179665
Support for Windows 7 and Windows 2008
In Cisco DCNM Release 5.1(3u), the Cisco DCNM server supports Windows 2008 and the Cisco DCNM client support Windows 7.
You can download the DCNM from the Software Download. Device Manager is bundled in DCNM.
For DCNM-SAN installation please see here:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/installation/guide/inst_troubleshoot.html
I hope this helps.
Carlos -
How to manage Active directory and tools to manage Active Directory
How to manage Active directory and which tools we use?
You can use Microsoft Active Directory management tools:
http://technet.microsoft.com/en-us/library/aa998508(EXCHG.65).aspx
http://technet.microsoft.com/en-us/library/aa998508(EXCHG.65).aspx
erview of Server Message Block signing
http://support.microsoft.com/kb/887429/en-us
Remote Server Administration Tools for Windows 7:
http://www.microsoft.com/downloads/details.aspx?FamilyID=7d2f6ad7-656b-4313-a005-4e344e43997d&displaylang=en
AD Admin Center:
http://technet.microsoft.com/en-us/library/dd560651(WS.10).aspx
http://technet.microsoft.com/en-us/library/dd560652(WS.10).aspx
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX http://blogs.sivarajan.com/ http://publications.sivarajan.com/ This posting is provided "AS IS" with no warranties, and confers no rights. -
Hi,
I was following the artigle (http://www.messageops.com/resources/office-365-documentation/ad-fs-with-office-365-step-by-step-guide/) but
when try to install the 'Office 365 PowerShell Module' shows a msg saying that 'windows azure active directory module for windows powershell is not supported by your version'.
And according to the blog (http://blogs.office.com/2014/04/15/synchronizing-your-directory-with-office-365-is-easy/) "DirSync can be
installed on an existing domain controller"
>>>> Any help is appreciated.
* Similar issue: http://www.adaxes.com/forum/post7398.htmlOk Vasil tks for reply, but this server is 64x. I dont get the point.
Microsoft Windows [Version 6.0.6002]
C:\Users\Administrator>set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
CLIENTNAME=ANJOTEC_NOTE01
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=COMPANYBR-SERVER
ComSpec=C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
lib=C:\Program Files\SQLXML 4.0\bin\
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\COMPANYBR-SERVER
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\ProgramData\Oracle\Java\javapath;C:\Program Files\HP\NCU;C:\Windows\sys
em32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\
1.0\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program File
(x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Serve
\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program F
les (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQ
Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Vis
al Studio 8\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\ExchangeMapi\
C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x
6)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Rox
o Shared\9.0\DLLShared\;C:\Program Files\Microsoft\Exchange Server\bin;C:\Progr
m Files\Microsoft\Exchange Server\Scripts
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 30 Stepping 5, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=1e05
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
RoxioCentral=C:\Program Files (x86)\Common Files\Roxio Shared\9.0\Roxio Central
3\
SESSIONNAME=RDP-Tcp#0
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Administrator\AppData\Local\Temp\2
TMP=C:\Users\Administrator\AppData\Local\Temp\2
USERDNSDOMAIN=COMPANYBR.LOCAL
USERDOMAIN=COMPANYBR
USERNAME=administrator
USERPROFILE=C:\Users\Administrator
windir=C:\Windows
C:\Users\Administrator> -
How to install a fresh copy of windows xp with sp2 on a msi k8t neo
My specifications:
CPU: AMD ATHLON 64 - 3000MHZ
MOTHERBOARD: MSI K8T NEO
RAM: CRUCIAL MICRON 1024MB DDR
HDD: WD 120GB ( C: 60GB, D: 60GB )
HDD: SEAGATE 4GB ( E: 4GB )
DVD: NEC 3520
CD: SONY
The system is on drive C:
primary master HDD 4GB ( on drive E: )
primary slave NONE
secondary master CDR DVD-RW
secondary slave CDR SONY
and last HDD 120GB on primary raid ( on drive C: and D: )
NONE on secondary
I have 2 floppy disks: on the first one it says G72-PRSA060, Promise 376/378 Driver, Disk 1 of 1
on the second one it says G72-VASA040, VIA SATA RAID Driver, For VT6420/VT8237, Disk 1 of 1
Can please someone tell me how to install a fresh copy of windows xp on my computer from scratch? All I know that I have to press F6 at some time and insert one of the disks but I don't know which one. And I don't know when to insert a second disk.
Thanks for helping meYeah. I remember when I had that board. I found the best SATA ports were the Promise ones, but...
What do you think, Tiresmoke? You had the same board too if I'm not mistaken. -
How to install adobe flash player in windows 8?
how to install adobe flash player in windows 8?
Windows 8 includes Flash Player for IE. You can update it through WIndows update. If you're unsuccessful, download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers) -
How to install adobe pagemaker 7 in windows 7
how to install adobe pagemaker 7 in windows 7
Pagemaker 7 has compatibility issues with Windows 7. You can try, but I expect the installer will not work properly.
Either move on to InDesign or keep PM7 on your WinXP setup.
You can also try run the application in Xp compatible mode. -
How to install hp deskjet 3900 in windows 8
Please let me know how to install hp deskjet 3900 in windows 8
Hi, take a look at this HP link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.
Maybe you are looking for
-
Best practice for handling data for a large number of indicators
I'm looking for suggestions or recommendations for how to best handle a UI with a "large" number of indicators. By large I mean enough to make the block diagram quite large and ugly after the data processing for each indicator is added. The data must
-
How can I add axis to an XY-graph programmatically (in LV 6i)?
I am currently using LabVIEW 6i to make a flexible graph window, which can be called and controlled from another VI. It's easy to send commands to the graph window over a queue interface (enabling things like adding and removing plots, changing the n
-
Dear all how can i change purchase order date if i enetred wrong in me21n.i checked in me22n for change but it is in grey mode & system not allowed. regards ajit
-
My Macbook pro, (late 2010) sometimes will sleep and won't wake up. then the sleep light flashes.What's the problem
-
Adobe premiere unable to start
adobe premiere trial unable to start 0xc000007b?