How to install All-In-One software with network printer?

I plugged my 7310xi into my Linksys WRT54G router. In Windows 7 64-bit I found the printer, installed the default drivers, and it's printing happily via the network.
But I need to install the HP All-In-One software if I want more advanced functions like scanning to my computer.
Downloaded the software from the web. During installation I get to the part where it asks me to choose how the printer connects to the computer. I select "through the network," click next,and it just keeps on kicking me back to this screen and I can't proceed. Any ideas?
Here's the error:
Now Launching=X:\hpzdui40.exe -I XXX -f X:\DIVins??.DAT
fail to load library X:\hpzscb01.dll
CNetworkUIPlugInApp::InitInstance fail to initialize sacabod. Result = o;
GetLastError = 193
RUN: Driver UI Plug-In exits returning 50
Exit code=50
I've set it to run in Vista compatibility mode and Run as Admin.
Message Edited by fuzzybabybunny on 08-06-2009 11:59 AM

I had exactly the same problem with Windows 7 64-bit and HP Photosmart 2610xi. All you need to do is right click on the installation program, go to properties, go to compatibility mode, select Windows Vista SP2 and optionally check run as administrator. It worked after that.

Similar Messages

HT1338 how to install all in one cannon printer

how to install all in one cannon printer

I had exactly the same problem with Windows 7 64-bit and HP Photosmart 2610xi. All you need to do is right click on the installation program, go to properties, go to compatibility mode, select Windows Vista SP2 and optionally check run as administrator. It worked after that.

HP Photosmart C4380 All-in-one won't network print

I ran the test, and my wireless radio is not working. i just wanted to know my options and where i stand.
is it possible to fix or do i have to contact hp etc? I bought it sometime in 09, so it shud be within warranty if i can find it.
thanks ,

First I would reset the printer. Turn it off, unplug power from the back of the printer (not the wall), wait 30 seconds, plug in, turn on.
Now reset the Network Settings:
1. Press the Wireless button on the front of the HP All-in-One.
2. Press the button next to the icon on the display until Restore Network Defaults
is highlighted, and then press the button next to OK.
3. Confirm that you want to restore the network defaults.
Run the Wireless Network Test again.
If you registered your printer, HP will have the purchase and warranty date.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Unable to install All-in-one Software & Drivers for Officejet 5610 All-in-One printer

I downloaded the software "File name: AIO_CDB_NonNet_Full_Win_WW_130_141.exe [1/1, 362.68M] version 13.1.0" and tried to install but was not successful after number of attempts. I tried HP Printer Install Wizard for Windows also but it also failed. I could not download even after number of attempts. It used to get aborted at different stages at every attempt. I am interested in HP solution centre for scanning documents. Please provide solution.

Hi there , I just wanted to stop in and share my suggestions as well, to hopefully help you out with the installation issue you are having with your Windows 7 system. Try these steps in order: Try unregistering and re-registering the Microsoft Windows Installer service:
1. Click the Start menu and type " cmd " in the search field and press enter.
2. Type in " msiexec /unregister " and then press enter.
3. Type in " msiexec /regserver " and then press enter.
4. Restart your PC and try the installation. Next, run this SFCS to try and repair any corrupt files in your OS:Using System File Checker to Restore System Files Let me know the specific results please!Best wishes to you!Show thanks for my reply to help you today by hitting the "thumbs up" icon below!

All in one as a network printer

I'm going to purchase an airport extreme and just wondered if using a HP 5510 as a network printer will I still be able to scan in documents ect?

Just an FYI, some of the newer HP AIO printers support scanning through the network. My CM1017 does, but not through the USB port on the Airport Extreme, you have to use a network connection.

Problem installing Photosmart C6180 All-In-One software

I've "googled" and found several similar installation issues but none quite match mine. When I attempt to install the All-In-One software, I receive a dialog box error "The system cannot find the file specified." The file that it is attempting to find is found in the Dialog window heading:
c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksys...
Using %temp% I am able to verify that the 7zS52C3 folder structure exists. However the ",sourcepath.setup" folder shown above is incorrect. it should be just "setup".
I've ran this install several times under different accounts, including creating a new admin account.
I've cleared all temp files, removed tsr files using msconfig as described and cannot seem to solve this issue. I even renamed the setup folder to ",sourcepath.setup" to see if this would solve the install but it failed on another file.
I am running Windows Professional x64, My HP Photosmart c6180 is connected to the network and I am able to print properly to it from my computer. I need the software primarily for "scanning to computer" functionality.
Any help is appreciated.

Hello @DirkPittP,
Welcome to the HP Support Forums!
I understand that when installing your HP Photosmart C6180 All-in-One Printer on your Windows 7 64 bit computer, you are encountering a 'c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksysinstall.exe The system cannot find the file specified' error. I would like to assist you with this issue today.
Now in your original post, I can see that you have already attempted installing the printer on administrator accounts, clearing the temp files, running an msconfig, and renaming the folder to no avail. At this time I would like you run the following steps to see if we can get this working for you.
Step 1: Uninstall Drivers:
First, I would like you to clean up your system of any software or drivers for your HP Photosmart that may have made their way onto your system during the failed installs. Rather than running the 'normal' uninstall process, I would like you to click here to download the Microsoft Uninstaller Tool.
Once the website opens, please select the Run now button on the right hand side. Please follow through any recommended fix steps provided. When prompted, choose that you need assistance with 'uninstalling'. You will be brought to a list of populated programs from your computer. Scroll through this list until you see your HP Photosmart. Select your HP Photosmart and allow it to uninstall.
This Microsoft Tool will also check your computer for any registry corruptions. Should any system corruptions be found, this Microsoft Tool will fix those corruptions for you.
Once the uninstall has completed, please close the Microsoft Tool and proceed to the next step.
Step 2: Clear the Temp Files:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder select Ctrl + A at the same time on your keyboard to highlight everything
Select the 'delete' button on your keyboard. If you get a pop up to skip an item, just skip it.
Once the Temp folder is emptied, close the window
Right click on your Recycling Bin and select Empty Recycling Bin
Step 3: Download Drivers:
Please click here to download the latest drivers for your printer.
Once the website opens select the Download button on the top left
Allow the download to Run
Once the download has completed the installer will automatically extract
After the extraction if you get the error again for 'blocksysuserinstall.exe' take note of the temp folder 7z . . . number sequence it refers to this time around.
Step 4: Rename Temp 7z Installer package:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder locate the 7z . . . folder that shows in there
Right click on the 7z folder and left click on 'rename'
Rename the folder to the 7z. . . to the name that the 'blocksysuserinstall.exe' points to
NOTE: Ensure that you are logged into the same User Account that the error points to: "c:\users\Myusername\AppData . . . " when you make the change to the 7z folder. There shouldn't be any 'sourcepath.setup' folders at all.
Step 5: Install Printer:
Once the 7z folder is renamed to the name the error wants than click on the 7z folder to open it
Scroll down to the bottom of the installer files
Double click on the setup.exe file at the bottom. It may show an HP logo to the left of it
An installer window should pop open
Follow through the with the onscreen instructions to reinstall your printer
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

How to install Windows XP in parallel with Mac OS on a Macbook?

Can anyone tell me how to install Windows XP in parallel with Mac OS on a Macbook?
If I divide the hard drive into 2 patritions and install Win XP & Mac OS on each patrition, is it ok?

I don't think he meant "Parallels", I think he just meant "parallel", with a little 'p'.
There are three options for running Windows software on an Intel-based Mac:
Virtualization: you can install software such as Parallels or VMWare (along with a licensed copy of Windows) which will emulate the environment necessary to run Windows software. Performance is significantly degraded, but you can work with both Windows and Mac software simultaneously.
Dual boot: You can use Apple's Bootcamp to partition your drive and create a CD of Windows drivers for your devices, so that you can then install Windows on one partition of your drive. Your Windows software will run just as it does on any other Windows PC, but you have to reboot to switch between Windows and OS X.
Crossover: Crossover is a product that allows you to run Windows programs in OS X without installing Windows. Not all Windows software will work with Crossover though.

How can I share applications and softwares with different users of the same computer?

First question: How can I share applications and softwares with different users of the same computer?
Second : Can I use 2 different I cloud accounts to synt 2 iphones with one computer?

Applications installed on the admin account are available to all user accounts unless Parental Controls are enabled.
Yes. Separate user accounts, help here > How to use multiple iPods, iPads, or iPhones with one computer

Installation fail for HP c4780 in All in One software Windows 8.1

I downloaded and attempted to install
PS_AIO_06_C4700_140_408
into Windows 8.1
The install fails part way through with the message box
Message box header contains: ....\Setup\hpzsh...
Message box content displays: The system can not find the file specified
Clicking close ends the the install with no further messages.
I attempted to use HP Print and Scan Doctor. The software apparently identifies the C4780 with the help of an installed basic printer driver (which also indicates that it can not find the specificed file and crashes but leaves a printer driver installed. This basic printer driver allows me to pull up its web page). HPPSD then indicates that it is downloading the appropriate All in One software. Downloading commences but after several minutes then stops with a failed download message.
I have to admit that I am rather disappointed with all the hoops I am having to perform to get a supposedly compatible printer installed.
I'd appreciate some help.
Thank you

Hello jmayoral,
Welcome to the HP Support Forums!
I see you where able to locate a solution to the file not found error you got while installing the Photosmart C4780 on the thread: I cannot install my HP Photosmart C4780 - I can't install my drivers and the HP solution center. Was there anything else you need a hand with?
Thanks for posting,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How to install owb server-side software on UNIX Solaris (SPACR-64)?

Hi there,
How to install owb server-side software on UNIX Solaris (SPACR-64)?
I've read the install guide
and it mentions
3. Start the installer by entering the following at the prompt:
cd mount_point
./runInstaller
I don't have access to any graphical interface on the UNIX box e.g. x-windows nor any cd with the software, just the solaris software downloaded from web - does this include the runinstaller
and is the runisnatller just a command line interface?
I hoped I would be able to download the software from oracle website and then simply run the a setup scrip?
Is it possible to do this? Would I simply substitute cd mount_point to cd <directory I put software)
I've never ran oracle universall installer on UNIX before.
Many Thanks
Edited by: user575470 on Feb 15, 2009 7:54 AM
Edited by: user575470 on Feb 15, 2009 8:06 AM

Hi,
You can install the server-side software from the downloaded software.
You don't need the CD
You do need an X-windows client on your computer to connect to the server OR work directly on the server.
Without X-windows you cannot start the Oracle Universal Installer.
Maybe there is a command line installation, I have never used this.
I hope this helps.
Regards,
Emile

How to Install crystal run time programs with out designer.

Can anyone suggest me how to install crystal run time program with out installing entire designer software.
Is it coming along with CR software package, which we have to do custom install or is it coming as a different package.
Currently my client is using only the run time programs to trigger crystal report from VB app but developers have installed entire software for development. We need to figure out how this install can be done, as it was done long time before and folks who have done it left the company.
Any suggestion on this would be of great help to me.

See this wiki:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0
Ludek

HP all-in-one C6180 with a duplexor fitted that printed double sided under Win XP but not Win 7 32bi

I have an HP all-in-one C6180 with a duplexor fitted.
I could print double sided under Wimdows XP but have now upgraded to Windows 7 32-bit.
I have installed the latest drivers for the C6180 from the HP site.
I cannot print double
sided because in Printer Properties > Device Settings > Installable Options the "Duplex unit for 2-sided printing" option is not available for Install.
Can you please provide a patch or the latest driver with the Install option enabled please.
Regards,
John Seager
{Personal Information Removed}

You may need to enable the duplexer while logged in as a user with administrative privledges. Alternately go to the Devices and Printers folder, right clisk on the C6180, Printer Properties, Security, and click the settings to allow "Manage this printer" for the user.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why can't i install all in one printer 4200 series on my windows 7 home premium?

I can't install my 4200 series all in one printer on windows 7 home premium 64 bit ? Help please?

Sharon,
Welcome to the HP Community Forum.
sharond6941 wrote:
I can't install my 4200 series all in one printer on windows 7 home premium 64 bit ? Help please?
It would help a great deal if you could help explain a bit why you cannot install the software.
Does the software not download?
Can you not find your printer? Do you not know what kind of printer you have?
Are there errors during the installation?
Can you provide any information to help us understand the situation?
========================================================
Help and Instructions to Install the Full Feature Software for the Printer:
Install Full Feature Software – Printer
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

How to display more than one column with for each

Hi guys,
how to display more than one column with for each like below?
for each
Item1
Item2
Item3
Item4
Item5
Item6
Item7
Item8
Item9
Item10
End for each
for each
Item1     Item2     Item3
Item4     Item5     Item6
Item7     Item8     Item9
Item10
End for each

Take a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
Thanks,
Bipuser

How to install All-In-One software with network printer?

Similar Messages

Maybe you are looking for