How to install an ATI Radeon HD 5700 into a Mac Pro dual 2.66?

My Nvidea card just died on my and I've gotten an ATI Radeo HD 5700 card to replace it but I can't find any information anywhere on the installation process. Slotting it in is easy but I'm unsure where to connect the 6-pin cable. I can see a pair of likely connectors on the board marked HDD_SNS but I'm not sure which, if either, is correct. Anybody out there with info? I've tried the AMD site and just googling with no useful results.
Thanks,
JD

Does the following pdf help?
Graphics Cards with Booster Cable
(look at page 5)

Similar Messages

  • Installed a ATI Radeon HD 5770, now Final Cut Pro won't even open - says 0mb Vram?

    Installed a ATI Radeon HD 5770, now Final Cut Pro won't even open - says 0mb Vram?  Only dvi port work the two mini's not at all.  Bad card?  Macpro 3,1

    I would guess there is a a corrupt media in the project. You could also try to copy a part of it to new project which is shorter and see what happens. 5 Hours is extremely long. Best to divide it to smaller sections.

  • Television and TV Recording with a ATI Radeon X1900 XT 512MB  equip Mac Pro

    I have been looking into a Mac Pro 2.66-3.0 Dual-core equipped with a ATI Radeon X1900 XT 512MB. One of the things I would like to accomplish is to also use the thing as a television and TV recorder (reliably). I have experience with the a PC equiped with a ATI9700pro all in wonder. I had nothing but problems with the software with hours (weeks) spent trying solve the issues. Turns out this is not an unusual thing with the ATI-Allinwonder. Thought I would check here to see whether anyone has input on how the x1900 works on the mac pro esp as a tv device.

    the elgato system is an external tv tuner that connects by USB. It has nothing to do with the graphics card in your mac.
    you can connect an antenna, cable, s-video or composite. Some of the models accomodate HDtv now.
    the results are clean, and i've had no problems.

  • Is it possible to install a ATI HD 4780 in to my mac pro PCi.E slot 1

    Hi iam new to this apple forum and have an Question befor i buy and try then fail or fxxx sumthing up. Are there any driver support for this set up?
    Thankx for replies Gals :N: Guys

    If it lacks EFI firmware, it won't work in OS X and no video out but will work if you install and run Windows natively.
    Right now, Nvidia 8800GT and ATI Radeon 3870 are the two upgrade choices.
    http://www.barefeats.com/harper18.html
    http://www.barefeats.com/harper11.html

  • ATI Radeon X1900XT 512 MB  for mac pro first  gen

    I am looking for a new graphics card for my first generation mac pro desktop (built 2006)  Currently has ATI Radeon X1900XT 512 MB  installed   Any suggestions on where to find one   
    Alternative may be to get a new machine
    M Ferro

    For me, the best place for any type of upgrade on your Mac Pro 1,1 (mine is a 2.66) is at Other World Computing.
    The only video card available from OWC is the ATI Radeon 5770 HD.
    http://eshop.macsales.com/MyOWC/Upgrades.cfm?model=250&sort=pop&type=Video
    Note: The same video card is also available at the online Apple Store.
    I'm hoping to get it soon.
    --->Robert
    8-)

  • ATI Radeon HD 4870 1GB for Mac Pro 2.66 Quad Core Xenon

    I have the option of picking up an ATI Radeon HD 4870 1 GB graphics card to go with my soon-to-be-new MAc Pro 2.66 Quad core. I see know that Apple can upgrade to ATI Radeon HD 4870 512MB, but that card is not available to me at the moment. Will the 1GB do the job without overheating the system? Am new to the Mac Pros. Need it for the Windows gaming portion of the system. Am using the rest for graphics and photography.

    If the MAc Pro 2.66 comes with Snow Leopard, why would I have to upgrade my OS?
    OK. So, if got the MAc version, it would work A-OK without overheating?
    Thanks for your input!

  • Questions about ati radeon 2600 on an 2006 mac pro

    I know the debate has been going around for awhile about these cards, Apple claims that they are not supported but my card runs as long as you have leopard installed. So far the card has performed great, all my games and graphics programs run beautiful with it but I do have two problems. One is I can only have my display set at 1400 x 1050 any lower setting results in severe blurring on the screen. The other problem is that the text on my screen is some what pixelated and blurry.
    I was wondering if there is a fix for this problem or is it just the price I have to pay for running it on a 2006 mac pro.

    If it is a problem, and you can afford another upgrade, the Radeon 3870 might be your best choice.
    http://www.barefeats.com/harper17.html
    http://www.barefeats.com/harper18.html
    http://eshop.macsales.com/Item_XLR8YourMac.cfm?ID=10876&Item=ATI100435928

  • Is it advisable to install antivirus software (such as kaspersky) into a mac pro book?

    Is it advisable to install antivirus software - such as Kaspersky - into a pro book?

    Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There  is a threat, and you need to educate yourself about it.
    1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to take control of it remotely. That threat is in a different category, and there's no easy way to defend against it.
    The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
    The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    ☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    ☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
    3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    ☞ It can easily be disabled or overridden by the user.
    ☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
    ☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
    Apple has taken far too long to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. Those lapses don't involve App Store products, however.
    For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, not machine behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
    The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
    Software from an untrustworthy source
    ☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
    ☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
    ☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
    ☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
    Software that is plainly illegal or does something illegal
    ☞ High-priced commercial software such as Photoshop is "cracked" or "free."
    ☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
    Conditional or unsolicited offers from strangers
    ☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    ☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
    ☞ You win a prize in a contest you never entered.
    ☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
    ☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
    ☞ Anything online that you would expect to pay for is "free."
    Unexpected events
    ☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
    ☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
    ☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
    ☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
    I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
    Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
    7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
    Why shouldn't you use commercial AV products?
    ☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
    ☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    ☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
    ☞ Most importantly, a false sense of security is dangerous.
    8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
    Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
    London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
    You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
    The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
    10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It can be as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

  • How do I plug a non-USB microphone into a Mac Pro?

    Question from an audio newbie....I've got a 2009 Mac Pro desktop computer. I just bought a microphone headset. The headset has a two-pronged plug in, a green one for the headset (speakers) and a pink one for the microphone. My Mac Pro has two speaker ports - one in front and one in back - but I can't find anyhwere to attach the microphone plug.
    I don't want a USB headset because my USB ports are already maxed out. How can I attach this non-USB microphone and get it to work?

    Look at your back side. Look at the booklet too that it came with or from support page manual.
    www.apple.com/support/macpro
    there are digital out audio and microphone on the backside.

  • FCP 7 Crashes after install of ATI Radeon HD 5770

    FCP 7.0
    MacPro1,1
    Mac OS X 10.5.8
    Darwin 9.8.0
    (2) Dual-Core Intel Xeon 3 GHz processors
    (Memory:          4 GB)
    (2) 500GB internal HD's
    (2)  500 GB external HD's 
    Graphics Card: ATI Radeon HD 5770
      Type:          Display
      Bus:          PCIe
      Slot:          Slot-1
      PCIe Lane Width:          x16
      VRAM (Total):          1024 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x68b8
      Revision ID:          0x0000
      ROM Revision:          113-C0160C-155
      EFI Driver Version:          01.00.436
    Random unresponsive mouse, keyboard, and software when working in FCP.   The system would freeze and my only remedy was to shut down.   This would only happen when editing video.   I assumed my ATI Radeon 1900xt grapics card was the culrprit. 
    Ordered and installed the ATI Radeon HD 5770 upgrade from apple.  Trying to open FCP after the install, but FCP was blocked from opening for 3 reasons  1.  “Final Cut Pro requires that your system have 128 MB of VRAM; this system has only 0”   2.  Quartz Extream compatiblity and the minimim pixel height on my display was under under 800 (768) 
    I restarted the computer and reset PRAM (hold option, command, P & R keys down all together when you restart). Wait until you hear the second chime before releasing the keys.   This didn’t work.
    So, I trashed preferences.  That didn’t work.
    I opened up Applications, control click on FCP, “Show Package Contents”  Contents/Resources and opened "minsys.plist"  and set the minimum VRAM, Quartz Extream Capable, & Screen resolution all to “warn” instead of “block”.  This allowed FCP to begin it’s launch, BUT FCP  would then hang on the Looksuite Plugin and not open. 
    So, I then uninstalled LookBuilder & removed the plug in.  FCP would then open. BUT immediately after setting my timeline preferences to Apple ProRes 442 LT  FCP crashed with in seconds. 
    As a work around I tired creating a new user with admin privileges but to no avail.  FCP still crashes.   with this error “ Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000” 
    Any direction would be very much appreciated.
    Thanks,
    Justin

    > I purchased my rig with FCP and other programs already installed.  I don't have install disk's for FCP.  When I upgrade to SL, will I need to re-install FCP as well, or (assuming I have no other problems) can I upgrade the OS with out installing FCP again?<
    The previous owner is going to be in trouble in the afterlife but you're going to be in big trouble when you attempt to upgrade FCP. You will be able to purchase FCPX, from what we can tell, without your serial numbers.
    The general advice around here is to do a scroched earth total erase and install of everything when changing operating systems. In all my years of runing FCP on my Macs, I've never done that. I've alwyas just run the OS Update script and I have never had a problem with this method. I do, of course, make a clone of my system drive before attempting major changes.
    If you do an intialization install when you get Snow Leopard, you will need FCP disks. Whoever you bought the rig from stole them from you.
    bogiesan

  • Realtek HD Audio driver disappears after installing an ATI Radeon graphics card

    My Realtek HD Audio driver disappears (from both the Vista "Sound Manager" and the "Device Manager") and is replaced by an ATI HD Audio driver after installing an ATI  Radeon 5450 graphics card.  I've tried un-installing the ATI Audio driver and re-installing the Realtek Audio driver.  But, upon rebooting, Vista automatically re-installs the ATI Audio driver (and the Realtek Audio driver, which I just re-installed, is no where to be found after rebooting).  I'm using an HP a6110n desktop running Windows Vista.  
    This question was solved.
    View Solution.

    Hi:
    I bet you were unpleasantly surprised by that! 
    The fix is simple:
    Go into your system setup (BIOS) using the F10 key.
    Find your device configuration menu. In that menu there should be a setting for your onboard audio. It is probably set to Auto.
    Change the setting to Enabled. Hit the F10, key there and again when you save your settings and exit.
    Now your onboard audio will be back and your HDMI out audio on your graphics card should work too when you need it.
    What happened was when you installed the Video card with HDMI out, there is an audio chip on the video card for HDMI. The PC sensing a new sound card, just disabled the onboard sound card because it thought you didn't want to use the onboard card anymore.
    Changing the BIOS setting to enabled tells the PC to use the onboard audio card as well as any others you may have installed.
    Paul

  • How/Can I install WINDOWS 7 64BIT on a 1st Generation Mac Pro ?

    Hi, Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz? Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
    I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all te installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
    When I try installing 64 bits, I never get past the "select cd rom 1or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
    Problem is it's all Windows based with exe files and presupposes I already have Windows running.
    I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows users successfully installing Windows 7 on a 1st Generation Mac Pro.
    Thanks.

    I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
    Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
    1. Update Snow Leopard
    2. Place the Windows cd in the Super Drive
    3. Shut down the computer
    4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
    5. Boot the computer holding down the Option key
    6. Boot to the Windows cd
    7. Install Windows and format the drive to NTFS
    8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
    9. After Windows installs, place your Snow Leopard disc in the Super Drive
    10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
    11. Go to Start > All Programs > Apple Software Update
    12. Update again until it's done.
    13. You'll also find a BootCamp under Control Panel, check it out.
    14. Shut down the computer and replace the hard drives in their original order
    14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

  • How do I take ownership of a hard drive build in windows but installed as an additional disk in my new Mac Pro?

    How do I take ownership of a hard drive build in windows but installed as an additional disk in my new Mac Pro?
    I bought a Mac and have various HDDs, some Portable some SATA, I can right to them and dont seem to be able to take ownership of them, is this to do with the format or Security seting I can't find?
    Any help would be great; thanks.
    Stephen

    Thanks Kaz-K, this was what I assumed it to be.  I have started to move the stuf over to a 4GB internal drive, once done and verified, I will reformat the drive and move it back, blooming nusience.
    Cheers.
    Stephen

  • How do I know what kind of drive is ok to install into my Mac Pro 1.1?

    Can I install a "Samsung Desktop Class Spinpoint F3 1 TB SATA 3.0 Gb-s 32 MB Cache 3.5-Inch Internal Bare-OEM Drives, HD103SJ"
    drive into my Mac Pro 1.1? (2x3 3 Ghz Dual-Core Intel Xeon processor.)
    All the reviews for this drive were by people with PC's not Mac's. Also, my Mac Pro is a Tower so does it mean this "desktop class" won't work? Samsung has another one for $10 more that doesn't say "desktop" : the "1TB Samsung Spinpoint F3 SATA2 3.5" Hard Drive (32MB cache, 7200rpm)." Should I get that one instead?

    Thanks, guys. I ordered and installed the drive I asked about, and it's working fine. The next drive will be the WD black, as you suggested. (It was too late for me to change my order when I read your recs.)
    Having installed this I TB drive, I now want it to be my main one, with my system and all of my files moved to there. My current main drive, the one that came with the computer, is only 250MB and is almost full. My new question is: what's the best way to move everything? How do I get the new drive to have a working system folder and be the start up disk. I remember last time I tried to copy everything from one drive to another, the copied system wouldn't work on the new drive.

  • Can't install montain lion, mavericks or yosemite on my mac pro early 2008 8core

    I tried installing mountain lion mavericks and yosemite on my mac pro early 2008 I upgraded the video card to see if that was the problems and still the same the problem is that after installing even during install the mouse moves super slow and the keyboard won't work at all so I can't entern
    any information this is with a clean install and even if I update  lion it does the same everything works fine on  lion 10.7.5 problems there does any one know what could be the issue here? I'm only running one monitor and its the 30 inch cinema display here are the specst of my machine excuse my grammar and spelling it was never my favorite subject
      Model Name: Mac Pro
      Model Identifier: MacPro3,1
      Processor Name: Quad-Core Intel Xeon
      Processor Speed: 2.8 GHz
      Number of Processors: 2
      Total Number of Cores: 8
      L2 Cache (per Processor): 12 MB
      Memory: 8 GB
      Bus Speed: 1.6 GHz
      Boot ROM Version: MP31.006C.B05
      SMC Version (system): 1.25f4
      Serial Number (system): G881111VXYK
      Hardware UUID: 714C0BE4-9A35-5C33-BF74-0F55F7C31B5F
    AMD Radeon HD 6870:
      Chipset Model: AMD Radeon HD 6870
      Type: GPU
      Bus: PCIe
      Slot: Slot-1
      PCIe Lane Width: x16
      VRAM (Total): 1024 MB
      Vendor: ATI (0x1002)
      Device ID: 0x6738
      Revision ID: 0x0000
      ROM Revision: 007-NETKAS-ORG
      EFI Driver Version: 01.00.507
      Displays:
    Cinema HD:
      Display Type: LCD
      Resolution: 2560 x 1600
      Pixel Depth: 32-Bit Color (ARGB8888)
      Display Serial Number: CY03018WXMP
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Rotation: Supported
      ECC: Enabled
    DIMM Riser B/DIMM 1:
      Size: 2 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x014F
      Part Number: 0x5453324741504D41435038502D5420202020
      Serial Number: 0x00031CFB
    DIMM Riser B/DIMM 2:
      Size: 2 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x014F
      Part Number: 0x5453324741504D41435038502D5420202020
      Serial Number: 0x00031CFB
    DIMM Riser A/DIMM 1:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5335
      Serial Number: 0x01431026
    DIMM Riser A/DIMM 2:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5935
      Serial Number: 0x57656411
    DIMM Riser B/DIMM 3:
      Size: Empty
      Type: Empty
      Speed: Empty
      Status: Empty
      Manufacturer: Empty
      Part Number: Empty
      Serial Number: Empty
    DIMM Riser B/DIMM 4:
      Size: Empty
      Type: Empty
      Speed: Empty
      Status: Empty
      Manufacturer: Empty
      Part Number: Empty
      Serial Number: Empty
    DIMM Riser A/DIMM 3:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5335
      Serial Number: 0x01172313
    DIMM Riser A/DIMM 4:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5335
      Serial Number: 0x01172714
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Negotiated Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    WDC WD5000AAKS-00A7B0:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: WDC WD5000AAKS-00A7B0                 
      Revision: 01.03B01
      Serial Number:     WD-WMASY0158891
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk2
      Medium Type: Rotational
      Bay Name: Bay 1
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk2s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk2s1
      Content: EFI
    HD:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 484.82 GB (484,820,348,928 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk2s2
      Mount Point: /Volumes/HD
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk2s3
      Content: Apple_Boot
    WDC WD5000AAKS-00A7B0:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: WDC WD5000AAKS-00A7B0                 
      Revision: 01.03B01
      Serial Number:     WD-WMASY0158891
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk2
      Medium Type: Rotational
      Bay Name: Bay 1
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk2s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk2s1
      Content: EFI
    HD:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 484.82 GB (484,820,348,928 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk2s2
      Mount Point: /Volumes/HD
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk2s3
      Content: Apple_Boot
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Negotiated Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZBHBEEAH
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk1
      Medium Type: Rotational
      Bay Name: Bay 2
      Partition Map Type: MBR (Master Boot Record)
      S.M.A.R.T. status: Verified
      Volumes:
    UNTITLED 1:
      Capacity: 500.11 GB (500,107,860,992 bytes)
      Available: 449.41 GB (449,412,988,928 bytes)
      Writable: Yes
      File System: MS-DOS FAT32
      BSD Name: disk1s1
      Mount Point: /Volumes/UNTITLED 1
      Content: DOS_FAT_32
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZBHBEEAH
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk1
      Medium Type: Rotational
      Bay Name: Bay 2
      Partition Map Type: MBR (Master Boot Record)
      S.M.A.R.T. status: Verified
      Volumes:
    UNTITLED 1:
      Capacity: 500.11 GB (500,107,860,992 bytes)
      Available: 449.41 GB (449,412,988,928 bytes)
      Writable: Yes
      File System: MS-DOS FAT32
      BSD Name: disk1s1
      Mount Point: /Volumes/UNTITLED 1
      Content: DOS_FAT_32
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Negotiated Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZAK1RKSF
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk0
      Medium Type: Rotational
      Bay Name: Bay 3
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk0s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk0s1
      Content: EFI
    machd:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 372.42 GB (372,419,407,872 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk0s2
      Mount Point: /
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk0s3
      Content: Apple_Boot
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZAK1RKSF
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk0
      Medium Type: Rotational
      Bay Name: Bay 3
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk0s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk0s1
      Content: EFI
    machd:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 372.42 GB (372,419,407,872 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk0s2
      Mount Point: /
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk0s3
      Content: Apple_Boot
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported

    Try this:
    clone your system and repair it with Disk Warrior instead
    Or try a clean test system install on another drive
    A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
    Try to run w/o externals. MyBook included.
    Is that a 7200.11 1TB? they had a lot of issues.
    Run AHT off your OEM DVD.
    2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current.  Hopefully you have a UPS and is 1500VA unit.
    When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
    TimeMachine has its own bad habits, especially with Green drives and some externals.
    Try to rule out everything and then add back one at a time.
    And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old.  Might want ATI 5870 or 5770.

Maybe you are looking for