How to install an Midlet Permanently and start it automaticaly

Is their any way to install the Midlet application created for S60 plateform permanently to the S60 device. And is their any way to run that Midlet automatically when ever the device starts.

No, there is no way to install a MIDlet permanently on device and also there is no way to lauch the MIDlet whenever the device is start .
Ashish

Similar Messages

  • How to install Workshop for WebLogic and WebLogic Portal?

    Hi All,
    I am new to Weblogic Portal. I would like to start learning Oracle Weblogic Portals..
    Can anyone please guide me, how to install Workshop for WebLogic and WebLogic Portal?
    As per the ""Tutorials – Getting Started with WebLogic Portal"" (http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/setup_dev_env.html)
    we need to install the Workshop for WebLogic and WebLogic Portal.
    Please suggest me where should i get the required environments/IDE?
    Thanks,
    Harish.

    Hi Harish
    1. If this is your first time with Weblogic Portal, I would recommend to download the latest Weblogic Portal Software Rel 10.3.2 from this bottom link. Check Accept Radio button, for windows download windows installer. Its about 1 GB file. This software includes Eclipse IDE, Weblogic Server and Weblogic Portal.
    http://www.oracle.com/technology/software/products/wlp/index.html
    2. During the installation process, make sure at one point you select Custom mode (NOT default Typical mode). In next following screens you will see all bundles checked EXCEPT for Samples. So make sure you check Samples Check box both under Weblogic Server and Weblogic Portal. Then proceed. This will install full Weblogic Workshop (Eclipse IDE), Weblogic Server and Weblogic Portal. This is the good installation package. Also it will install samples for Portal and Server. If you select all default typical mode, it will NOT install samples. You can install samples later on also, but its good at installation time itself you select custom and check Samples also.
    3. WLP 10.3.2 uses Eclipse IDE. If you are familiar with Eclipse IDE this should be helpful. Otherwise also, its ok.
    4. For learning WLP, in Eclipse IDE, you need to create Portal EAR Project, then Portal Web Project. Inside portal web project create simple jsp hello world portlets and a simple portal.
    5. For Deploying and Testing Portal application you need to create Portal Domain using config wizard. You can see this from Start -> Programs -> Oracle Weblogic Portal shortcut -> Weblogic Server -> Tools -> Configuration Wizard.
    6. You can start Workshop IDE from Start -> Program Files -> Oracle Weblogic Portal ...-> Eclipse For Weblogic 10.3.2
    Here are the links for quick start guide for portal development. Please do refer them.
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/index.html
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/quickstart/newproject.html
    HTH
    Ravi Jegga

  • Wife and I share itunes account.  How do we save her info and start her own account?

    When we first got our iphones, we were told at apple store we could use the same itunes account.  We still do.  Now with 2 iphones, 2 laptops, ipads, etc.  it is a mess with facetime and sharing apps.
    How do I save her information and start a new account for her?
    Thanks

    Your best bet would be to set up a separate Apple ID for her to use with iCloud, Messages, and FaceTime, but continue to use the same iTunes account for purchases (click on the second box "Use one Apple ID for iCloud and a different Apple ID for Store Purchases" to go directly to the section which outlines how to do this). The reason you would want to continue to use the current ID for iTunes is because all of the purchases made under that ID will be forever tied to that ID - purchases cannot be transferred to another ID:
    Set up your Apple ID for iCloud and iTunes - Apple Support
    Cheers,
    GB

  • I bought this apple ipad from pawn shop and have receipt. its locked by previous owner and pawn shop had no info on previous owner to contact. how can I delete all content and start fresh so my grandson can use for college?

    i bought this apple ipad from pawn shop and have receipt. its locked by previous owner and pawn shop had no info on previous owner to contact. how can I delete all content and start fresh so my grandson can use for college?

    If it's activation locked, you can't; go back to the shop and ask for a refund.
    (120778)

  • How could force tomcat to stop and start on every build on Ide?

    How could force tomcat to stop and start on every build on Ide?

    Hello,
    See this help article:
    *[https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page How to set the home page]
    Or try go to about:config page, search for "browser.startup.homepage" change its value to "about:home"(default) or "about:blank"(blank page)
    *[http://kb.mozillazine.org/About:config about:config]

  • How to install ias 1.0 and 8.1.6.1 on a single red hat 6.1 machine

    How to install ias 1.0 and 8.1.6.1 on a single red hat 6.1 machine.
    i am expecting a lot of problems during the ias installation, the db is working fine. is posible to install both products over the same machine?

    You should be able to iAs and the DB on the same machine but you will need to do the following:
    1. Create a new ORACLE_HOME for iAS (unsetenv ORACLE_HOME and setenv ORACLE_HOME to new home)
    2. Shutdown the DB in the existing Oracle home and change the corresponding listener port in listener.ora to a port other than the typical default (1521)
    3. Install iAS in the new Oracle home
    4. Make sure none of the listeners in the listener.ora under the new Oracle home are listening on the same port as that which you set for the existing DB listener.
    In general it is advisable to install iAS EE on a different machine than the origin database to realize the full benefits of iCache (EE)

  • How to install struct2 in netbeans and eclipse

    how to install struct2 in netbeans and eclipse

    Hi ganesh_delhi1980,
    It's Struts 2 and not struct2.
    You may verify what version of Struts is already installed on your IDE, you may also download and install packages :
    - NetBeans : Tools > Plugins
    - Eclipse : Help > Software updates...

  • HT1212 i have forgotten the password to my ipad and it says connect to itunes but my computer cant connect to the ipad because of the code and i need it know how to wipe the whole ipad and start from scratch?

    i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to install sap licensce? and orcle licensce ?

    hi friends
    i have to install sap licensce in sap ecc 6.0 and solman.
    how to get it from the marketplace  we buyed sap licensce .
    how to login from which client and which user ?
    how to install the orcle licensce to my data base ?
    please suggest me asap
    thanks in advance
    regards
    raja

    Hi Raja,
    Use t code SLICENCE in your ecc6 and solman.
    Determine the hardware key.
    Go to sap market place. click on 'Keys & Requests' tab. Here select 'Request permanent license key' tab. Enter the required information. This way you'll get the license key.
    Now go back to the SLICENSE in sap. select 'EDIT' - 'Install license key'' (F6).
    Log in to client 000 with DDIC for installing the license.
    As per my knowledge you dont need to install oracle key because, oracle comes in a bundle package with SAP.
    Hope this helps.
    Regards,
    Pranay

  • How to install GCC 3.3 and Berkeley DB ?

    Hi to all
    I am doing a project written in C. It involves the use of BerkeleyDB database too.
    Tthe problem is that the project compiles successfully on GCC 3.3 but on GCC 4.3 its gives error due to strict checking.
    Kindly tell me how can I install GCC 3.3 on archlinux.
    Also how can I install Berkeley DB (including development package) on archlinux with all the header files and configure it.
    thanks to all of you
    regards
    visio159

    Thanks guys I am loving Archlinux, the speed and control is amazing.
    I installed GCC 3.3 and db.h was already in /usr/include/db.h
    but when I compiled the code (MAIN.c) it gave these errors in db.h ??? I don't know what to do now, db.h itself is reflecting errors..huh.
    As you can see the starting lines are directing towards db.h as having errors
    [noface@myhost PROJ]$ gcc-3.3 MAIN.c -ldb
    gcc-3.3: ldb: No such file or directory
    In file included from MAIN.c:3:
    /usr/include/db.h:1201: error: syntax error before "u_int"
    /usr/include/db.h:1206: error: syntax error before '}' token
    /usr/include/db.h:1544: error: syntax error before "u_int"
    /usr/include/db.h:1660: error: `close' redeclared as different kind of symbol
    /usr/include/unistd.h:320: error: previous declaration of `close'
    /usr/include/db.h:1702: error: `remove' redeclared as different kind of symbol
    /usr/include/stdio.h:155: error: previous declaration of `remove'
    /usr/include/db.h:1703: error: `rename' redeclared as different kind of symbol
    /usr/include/stdio.h:157: error: previous declaration of `rename'
    /usr/include/db.h:1740: error: `stat' redeclared as different kind of symbol
    /usr/include/sys/stat.h:210: error: previous declaration of `stat'
    /usr/include/db.h:1742: error: `sync' redeclared as different kind of symbol
    /usr/include/unistd.h:933: error: previous declaration of `sync'
    /usr/include/db.h:1743: error: `truncate' redeclared as different kind of symbol
    /usr/include/unistd.h:949: error: previous declaration of `truncate'
    /usr/include/db.h:1809: error: syntax error before '}' token
    /usr/include/db.h:1916: error: syntax error before "u_int"
    /usr/include/db.h:1923: error: conflicting types for `close'
    /usr/include/db.h:1660: error: previous declaration of `close'
    /usr/include/db.h:1925: error: conflicting types for `del'
    /usr/include/db.h:1664: error: previous declaration of `del'
    /usr/include/db.h:1926: error: `dup' redeclared as different kind of symbol
    /usr/include/unistd.h:490: error: previous declaration of `dup'
    /usr/include/db.h:1927: error: conflicting types for `get'
    /usr/include/db.h:1669: error: previous declaration of `get'
    /usr/include/db.h:1928: error: conflicting types for `get_priority'
    /usr/include/db.h:1687: error: previous declaration of `get_priority'
    /usr/include/db.h:1929: error: conflicting types for `pget'
    /usr/include/db.h:1700: error: previous declaration of `pget'
    /usr/include/db.h:1930: error: conflicting types for `put'
    /usr/include/db.h:1701: error: previous declaration of `put'
    /usr/include/db.h:1931: error: conflicting types for `set_priority'
    /usr/include/db.h:1734: error: previous declaration of `set_priority'
    /usr/include/db.h:1975: error: syntax error before '}' token
    /usr/include/db.h:2126: error: syntax error before "u_int"
    /usr/include/db.h:2145: error: syntax error before "mp_ncache"
    /usr/include/db.h:2211: error: syntax error before "cl_id"
    /usr/include/db.h:2267: error: syntax error before '*' token
    /usr/include/db.h:2282: error: conflicting types for `close'
    /usr/include/db.h:1923: error: previous declaration of `close'
    /usr/include/db.h:2287: error: conflicting types for `err'
    /usr/include/db.h:1665: error: previous declaration of `err'
    /usr/include/db.h:2288: error: conflicting types for `errx'
    /usr/include/db.h:1666: error: previous declaration of `errx'
    /usr/include/db.h:2291: error: conflicting types for `get_cachesize'
    /usr/include/db.h:1672: error: previous declaration of `get_cachesize'
    /usr/include/db.h:2294: error: conflicting types for `get_encrypt_flags'
    /usr/include/db.h:1674: error: previous declaration of `get_encrypt_flags'
    /usr/include/db.h:2295: error: conflicting types for `get_errfile'
    /usr/include/db.h:1676: error: previous declaration of `get_errfile'
    /usr/include/db.h:2296: error: conflicting types for `get_errpfx'
    /usr/include/db.h:1677: error: previous declaration of `get_errpfx'
    /usr/include/db.h:2297: error: conflicting types for `get_flags'
    /usr/include/db.h:1678: error: previous declaration of `get_flags'
    /usr/include/db.h:2312: error: conflicting types for `get_msgfile'
    /usr/include/db.h:1683: error: previous declaration of `get_msgfile'
    /usr/include/db.h:2313: error: conflicting types for `get_open_flags'
    /usr/include/db.h:1685: error: previous declaration of `get_open_flags'
    /usr/include/db.h:2364: error: conflicting types for `open'
    /usr/include/db.h:1698: error: previous declaration of `open'
    /usr/include/db.h:2365: error: conflicting types for `remove'
    /usr/include/db.h:1702: error: previous declaration of `remove'
    /usr/include/db.h:2387: error: syntax error before "u_int"
    /usr/include/db.h:2391: error: syntax error before "u_int"
    /usr/include/db.h:2393: error: syntax error before "u_int"
    /usr/include/db.h:2398: error: conflicting types for `set_alloc'
    /usr/include/db.h:1705: error: previous declaration of `set_alloc'
    /usr/include/db.h:2402: error: conflicting types for `set_cachesize'
    /usr/include/db.h:1713: error: previous declaration of `set_cachesize'
    /usr/include/db.h:2405: error: conflicting types for `set_encrypt'
    /usr/include/db.h:1716: error: previous declaration of `set_encrypt'
    /usr/include/db.h:2406: error: conflicting types for `set_errcall'
    /usr/include/db.h:1717: error: previous declaration of `set_errcall'
    /usr/include/db.h:2408: error: conflicting types for `set_errfile'
    /usr/include/db.h:1719: error: previous declaration of `set_errfile'
    /usr/include/db.h:2409: error: conflicting types for `set_errpfx'
    /usr/include/db.h:1720: error: previous declaration of `set_errpfx'
    /usr/include/db.h:2412: error: conflicting types for `set_feedback'
    /usr/include/db.h:1721: error: previous declaration of `set_feedback'
    /usr/include/db.h:2413: error: conflicting types for `set_flags'
    /usr/include/db.h:1722: error: previous declaration of `set_flags'
    /usr/include/db.h:2431: error: conflicting types for `set_msgcall'
    /usr/include/db.h:1730: error: previous declaration of `set_msgcall'
    /usr/include/db.h:2432: error: conflicting types for `set_msgfile'
    /usr/include/db.h:1731: error: previous declaration of `set_msgfile'
    /usr/include/db.h:2433: error: conflicting types for `set_paniccall'
    /usr/include/db.h:1733: error: previous declaration of `set_paniccall'
    /usr/include/db.h:2448: error: conflicting types for `stat_print'
    /usr/include/db.h:1741: error: previous declaration of `stat_print'
    /usr/include/db.h:2510: error: syntax error before '}' token
    /usr/include/db.h:2632: error: syntax error before "u_long"
    In file included from MAIN.c:6:
    /usr/include/fcntl.h:85: error: `open' redeclared as different kind of symbol
    /usr/include/db.h:2364: error: previous declaration of `open'
    In file included from /media/evt/PROJ/PROJ/include/makeTreeDB.h:2,
    from MAIN.c:19:
    /media/evt/PROJ/PROJ/include/berkeleyDB.h: In function `removeDB':
    /media/evt/PROJ/PROJ/include/berkeleyDB.h:36: warning: passing arg 1 of pointer to function makes pointer from integer without a cast
    /media/evt/PROJ/PROJ/include/berkeleyDB.h:36: error: too few arguments to function
    /media/evt/PROJ/PROJ/include/berkeleyDB.h:37: warning: passing arg 1 of pointer to function from incompatible pointer type
    /media/evt/PROJ/PROJ/include/berkeleyDB.h:37: error: too few arguments to function
    /media/evt/PROJ/PROJ/include/berkeleyDB.h: In function `addNodeToBerkeleyDB':
    /media/evt/PROJ/PROJ/include/berkeleyDB.h:64: error: dereferencing pointer to incomplete type
    /media/evt/PROJ/PROJ/include/berkeleyDB.h:84: error: dereferencing pointer to incomplete type
    /media/evt/PROJ/PROJ/include/berkeleyDB.h:96: error: dereferencing pointer to incomplete type
    In file included from MAIN.c:21:
    /media/evt/PROJ/PROJ/include/scanProc.h: In function `scanProc':
    /media/evt/PROJ/PROJ/include/scanProc.h:92: warning: passing arg 1 of pointer to function from incompatible pointer type
    /media/evt/PROJ/PROJ/include/scanProc.h:92: warning: passing arg 2 of pointer to function from incompatible pointer type
    /media/evt/PROJ/PROJ/include/scanProc.h:92: error: too few arguments to function
    /media/evt/PROJ/PROJ/include/scanProc.h: In function `showSummary':
    /media/evt/PROJ/PROJ/include/scanProc.h:235: warning: passing arg 1 of pointer to function from incompatible pointer type
    /media/evt/PROJ/PROJ/include/scanProc.h:235: warning: passing arg 2 of pointer to function from incompatible pointer type
    /media/evt/PROJ/PROJ/include/scanProc.h:235: error: too few arguments to function
    In file included from MAIN.c:22:
    /media/evt/PROJ/PROJ/include/bigProcessing.h: In function `bigProcessing':
    /media/evt/PROJ/PROJ/include/bigProcessing.h:58: error: dereferencing pointer to incomplete type
    /media/evt/PROJ/PROJ/include/bigProcessing.h:95: error: dereferencing pointer to incomplete type
    /media/evt/PROJ/PROJ/include/bigProcessing.h: In function `scanFS_DB':
    /media/evt/PROJ/PROJ/include/bigProcessing.h:158: error: dereferencing pointer to incomplete type
    /media/evt/PROJ/PROJ/include/bigProcessing.h:178: error: dereferencing pointer to incomplete type
    /media/evt/PROJ/PROJ/include/bigProcessing.h:206: error: dereferencing pointer to incomplete type
    /media/evt/PROJ/PROJ/include/bigProcessing.h:211: error: dereferencing pointer to incomplete type
    /media/evt/PROJ/PROJ/include/bigProcessing.h:219: error: dereferencing pointer to incomplete type
    /media/evt/PROJ/PROJ/include/bigProcessing.h:224: error: dereferencing pointer to incomplete type

  • How to install / activate 'Yard Management' and BC sets

    Hi everyone
    I've been asked to look into how to install/activate
    'Yard Management' for business warehouse. From what I've found so far online/in SDN forums, it looks like you need to activate it under Logistics Execution in SPRO. But it's not there... so looks like I need to install the necessary 'BC sets' ??
    I've found a spreadsheet for 'W70 Yard management' with some
    technical names for these BC sets, like
    /SMB30/LYYRD_V_B031_D70, /SMB30/T30B_V_B032_D70 etc.
    Any idea what these are / whether and where you can get them
    (downloadable from SAP??) what transaction you use etc???
    Thanks!
    Ross (Basis guy)
    Edited by: Ross Armstrong on Jun 18, 2008 9:13 AM
    It seems we need this on a 4.7 SAP system, whereas this other docs/installing via Best Practices seems to be for ECC5 onwards... any ideas anyone?

    You should activate 0ANALYSIS_PATTERN (and all necessary objects).  Use this as starting point for customizing your own template.  Then use SPRO transaction RSCUSTV27 to change fields "Broadcasting" and "Ad Hoc Analysis" to your customized templates.
    Activate and customize 0QUERY_TEMPLATE_BROADCAST_PDF if you need to broadcast PDF's.  There's no place SPRO that I know of where you can configure this to use a custom template.
    You don't need 0QUERY_TEMPLATE_BROADCASTING70.  It's labeled 70 but in fact it's a 3.5 web template.

  • How to install a midlet on a mobile phone

    Hi all, please i need someone to put me thru on how to install my developed mobile application on a mobile phone. I have my jar file and my jad file in my bin folder and i tried uploading it and an html..
    <html>
    <head>
    <title>TFS_ONLINE_ACCOUNT</title>
    </head>
    <body>
    <a href="http://www.tfsseconline.com/mobile/TFS_ONLINE_ACCOUNT.jad">TFS_ONLINE_ACCOUNT.jad</a>
    </body>
    </html>but this is all i get when i click the link..
    MIDlet-1: TFS_ONLINE_ACCOUNT, TFS_ONLINE_ACCOUNT.png, Mobile
    MIDlet-Jar-Size: 3326
    MIDlet-Jar-URL: TFS_ONLINE_ACCOUNT.jar
    MIDlet-Name: TFS_ONLINE_ACCOUNT
    MIDlet-Vendor: Unknown
    MIDlet-Version: 1.0
    MicroEdition-Configuration: CLDC-1.1
    MicroEdition-Profile: MIDP-2.1
    and its not downloading.... Thanx in advance...

    Hi,
    I think , you have provided a incomplete MIDlet-Jar-URL property in the jad file.
    Change the property
    MIDlet-Jar-URL: TFS_ONLINE_ACCOUNT.jar
    to
    MIDlet-Jar-URL: http://www.tfsseconline.com/mobile/TFS_ONLINE_ACCOUNT.jar
    or go through following articles.
    http://developers.sun.com/mobility/midp/articles/ota/
    http://developers.sun.com/mobility/midp/ttips/wtkota/
    Jestan.

  • P55-CD53, how to install SATA AHCI drivers and Matrix Storage Manager?

    Please excuse my noobness as this is for my first PC build and much of it is Greek to me, but could someone please inform/educate me as to what the following drivers (link) are for and which need to be installed after a fresh installation of Windows 7 Pro x64? Do I need to install all of them because some of these appear to be redundant, just from different manufacturers, or am I mistaken? I have a single 500GB HDD but will probably add more down the road.
    JMicron JMB36x IDE Drivers (including floppy driver)
    Description   XP/Vista/Win7 Ver: 17.49.04.WHQL
    Update Date   2009-07-27
    Your System OS   XP/Vista/Win7 32/64bit
    (3989KB)
    Intel P55 AHCI / RAID Drivers
    Description   Ver: 8.9.0.1023
    Update Date   2009-07-24
    Your System OS   XP/Vista/Win7 32/64bit
    (23048KB)
    Intel P55 SATA RAID Driver (For floppy driver)
    Description   Intel P55 SATA RAID driver
    1. Extract the file and Copy all files to the floppy.
    2. Press F6 to install driver through the floppy when booting and loading RAID function.
    Update Date   2009-07-24
    Your System OS   XP/Vista/Win7 32/64bit
    (443KB)
    JMicron IDE/SATA RAID Drivers (with AP)
    Description   XP/Vista Driver Version: 1.17.43.05
    For floppy install:
    Please copy all the directories and files in the "floppy" folder to the root directory of a floppy disk to create a pre-install disk for Win2K/WinXP/Win2003/WinXP 64bits/Win2003 64bits.
    For example,
    A:\amd64
    \x32
    txtsetup.oem
    To enhance IDE transfer speed, we strongly recommend you install JMicron IDE/SATA Driver.
    Update Date   2009-02-23
    Your System OS   Windows Vista 32/64bit
    (4032KB)
    Windows XP 32bit
    (4032KB)
    Intel TPM Device Driver
    Description   Intel Trusted Platform chipset driver
    XP/Vista/Win7: 2.00.0000.00
    Update Date   2007-11-02
    Your System OS   Vista/Win7 32/64bit
    (23KB)
    Windows XP 32bit
    (23KB)
    On a side note, I have already flashed the BIOS to 1.4 using the Forum USB Flashing Tool (thanks!).

    Thanks.
    After booting from the Windows 7 disc, I selected Repair Windows, Load Drivers. Which specific controllers do I need to install for the P55-CD53 MB since there are multiple controllers listed for each of the four SATA compressed files?
    Considering the multiple files and multiple controllers, is there no one out there with a P55-CD53 that has AHCI mode enabled that can give dumbed down instructions on how to do so?
    The manual states "Select the appropriate RAID controller and press enter." Well... which one is the appropriate controller? Am I suppose to load the driver for all the AHCI controllers if that's even possible?
    For the Intel P55 AHCI / RAID Drivers compressed file, these are the controllers available within F6flpy64\iaAHCI.inf:
    Intel(R) ESB2 SATA AHCI Controller
    Intel(R) ICH 10D/DO SATA AHCI Controller
    Intel(R) ICH10R SATA AHCI Controller
    Intel(R) ICH7M/MDH SATA AHCI Controller
    Intel(R) ICH7R/DH SATA AHCI Controller
    Intel(R) ICH8M-E/M SATA AHCI Controller
    Intel(R) ICH8R/DH/DO SATA AHCI Controller
    Intel(R) ICH9M-E/M SATA AHCI Controller
    Intel(R) ICH9R/DO/DH SATA AHCI Controller
    Intel(R) PCH SATA AHCI Controller
    Intel(R) PCHM SATA AHCI Controller 4 Port
    Intel(R) PCHM SATA AHCI Controller 6 Port
    Also, regarding the dual BIOS controls for SATA/IDE/RAID settings previously mentioned, I believe SATA ports 1-6 are controlled via Intel and 7,8 are controlled via Jmicron. Considering my HDD is currently plugged into SATA 1, Jmicron probably isn't necessary for the moment.
    Edit:
    Turns out that none of the drivers for the controllers listed in iaAHCI.inf could be installed. However, I went ahead and installed the drivers listed for all the controllers in iaStor.inf. I reinstalled Windows 7 to get rid of the BSOD. I then installed the chipset drivers and Intel Matrix Storage Manager.

  • How to install the windows7 agent and monitor the same machine

    Hi ,
    I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
    Can you please guide me how to install the agent on windows and monitor the same?
    OEM version: 11.1.0.1
    Thanks in advance
    Regards,
    Kishore Tummeti

    If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
    Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
    Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
    Eric

  • How to install my onboard Networkcard and where do i find the drivers?

    I have updated my computer with some hardware and i now need to install the sound and network drivers again. I think i found the sound drivers  but i cant find the network driver. Anyone got a link for me? And how do you install these drivers? Just run the installfile and everything goes automatic or is it more complicated?
    Btw: I have Windows XP on a 40gb harddisk and a maxtor 300gb harddisk on secondary master. But in windows xp it only show 127gb (i think i was). Why?
    Thanks for all the help.
    BTW: If anyone got any other nice pages to get my mainboard up to speed, bring it:)

    Quote from: needahand on 06-October-05, 22:39:40
    But in windows xp it only show 127gb (i think i was).
    Windows needs SP1 or greater to recognize drives larger than 137GB. Install SP1 or SP2 and partition the remaining space via disk management.
    And we can't give you any info on the network card without knowing what motherboard it is.
    Good Luck
    Jeremy

Maybe you are looking for