How to install an operating system on my hp pavilion by booting
my hp pavalion is not responding to install os windows 8.1 by booting..
Is this an upgrade version or full retail version, DVD or USB? What is the full make of your computer HP 20-XXXX, replace the X's with the numbers.
Have you changed the boot order in the BIOS?
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.
Similar Messages
-
I just tried to reset my iPad...then couldn't reset it. I don't know how to install the operating system on it again
Is this how you reset?
1. Hold the Sleep and Home button down (together)
2. For about 10 seconds
3. Until you see the Apple logo (very important)
4. Ignore the red slider -
How to install an operating system on your hard disk,
So when I try to start my laptop a black screen comes up with:
Boot Device Not Found
Please Install an operating system on your hard disk.
Hard disk (3F0)
F2 System Diagnostics
For more information, please visit: www.hp.com/techcenter/startup
Someone please helpJoJo11 wrote:
So when I try to start my laptop a black screen comes up with:
Boot Device Not Found
Please Install an operating system on your hard disk.
Hard disk (3F0)
F2 System Diagnostics
For more information, please visit: www.hp.com/techcenter/startup
Someone please help
Would seem to indicate your HDD has gone bad and needs to be replaced. To Restore you computer back you need to get the recovery media to reformat back to factory install to get your computer back and working. If under warranty you will have to contact HP support to fix this problem but you will somehow need to get the recovery media to restore it back to factory install.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015- -
How to install an operating system on this computer?
What key should I press when the computer starts to run boot menu? I don't know how on this computer start the installation of the operating system from the installation disk. Help me, please.
If you are trying to perform a factory restore, repeatedly tap the F11 key at boot to enter the recovery partition. Follow the screen instructions.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations. -
I have had to re-install my operating system and have lost my itunes library. How can I get it back from the itunes server? There is no contact us available. The link they say is in purchases does not exist!!
I have had to re-install my operating system and have lost my itunes library. How can I get it back from the itunes server? There is no contact us available. The link they say is in purchases does not exist!!
-
I currently have a 1Tb HDD installed in my macbook pro and have just recently acquired a 120GB SSD. I want to put the operating system on the SSD so it boots quickly but keep the files on the HDD. How do I do this?
i also contacted the company that sold me the battery and they offered me my money back or a new battery
Suggest that you take them up on their offer of a new battery. Make sure you got the right one for your model MBP.
2 separate MBP battery installation Articles:
1 -
MacBook Pro: How to remove or install the battery
2 -
MacBook Pro: How to remove or install memory
=================
Never post your email address in a public forum. Spam bots roam public forums looking for "spam victims".
If you insist on using your email address in a public forum & you want to "trick" the spam bots, then suggest that instead of using "@" in the email address, use instead the actual word AT.
Regarding responding to your emal addy, we ask that you post all questions to the appropriate discussion forum. This allows other users and other helpers to have a chance to view and respond to your post. That way, everyone benefits from the exchange.
Thank you
I have requested that a HOST remove your email addy. -
If I have installed an operating system in one language and I want to change to another language how to do?
I mean I can change the system language without having to erase me things in my MAC?
-
How do I re-install the operating system on my BlackBerry Torch 9800 - I am sure it is hacked.
Greetings,
Can someone point me to instructions on how to re-install the operating system on a BlackBerry Torch 9800 and then upgrade it to the latest release?
I have done this several times in the past, due to recurring hacking, but have lost the instructions.
Thank you very much for your help.
Regards,
Jean-Pierre
P.S. I would preffer a releas of the OS without any pre-install applicaitons such as Twitter, Facebook, LinkedIn,
and above all, Whastapp. Thank you.Hi and Welcome to the Community!
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to re install mac operating system?
what is my problem?
I downloaded a pirated version of Iwork. After that My computer got slower and I am having problems with connecting wifi Internet.
What İ want:
I want to reinstall my Mac operating system and start from new. May be My Mac is affected by virus...
Please tell me how to reinstall mac operating system...
Details of My Macbookpro...
MBP 13.3/2.5/2*2GB/500/SD-ITP
Model no. A1278
Thanks for reading it...I don't think this is iServices, as that's quite old at this point and would seem to be extinct. Plus, as MadMacs0 points out, Mac OS X includes built-in definitions for iServices. (Of course, depending on how you downloaded it, you may have bypassed Mac OS X's security. Some torrent apps or other downloaders used for illicit purposes don't properly set the quarantine flag, so Mac OS X's security system never looks at the files downloaded.)
However, any time you install pirated software, all bets are off. It may not actually be iServices, but there's nothing to prevent someone from embedding something malicious in what you downloaded. It may not even be truly malicious... could be legit software used for malicious purposes.
I'd agree with nbar that you should wipe the hard drive clean and start fresh. (I disagree with him that a secure erase is necessary... that will not make your computer any safer than just erasing normally. The only thing that will do beyond a normal erase is ensure that file recovery software can't recover anything from your hard drive.)
If the instructions for wiping the hard drive are giving you trouble, try my instructions here:
How to reinstall Mac OS X from scratch
In the future, never install anything pirated on your computer! That's like handing a known criminal your wallet and trusting him to give it back to you intact (or at all). -
How can i re-install the operating system without deleting my files on the computer
I'm Trying to re-install the operating system on my macbook, and i dont know, if i can only re-install the OS without deleting the Data on the computer.
If the Snow Leopard version on your Snow Leopard DVD is lower than the Snow Leopard version on your computer, you will NOT in any case be able to re-install the OS the way you want it. You will only be able to erase your disk and then reinstall the OS.
It will only "upgrade" and keep your files if the Mac OS X version of your Snow Leopard DVD is newer than the Snow Leopard version on your computer. -
Someone please help me
I'm not sure what I should do to re install an operating system would it be possible to install mavericks
I don't have the operating system backed upThat's not good. OS X Recovery requires a high speed broadband connection as noted here > About OS X Recovery
Check your download speed here > Speedtest.net - The Global Broadband Speed Test
Message was edited by: CS -
After bios update, will not boot, says install an operating system
I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.jwess wrote:
I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest. -
Installing Multiple Operating Systems with grub and Arch Linux
NOTE: Please keep in mind that there are many different ways to achieve this same result using various loop and ramdisk methods, read this with a separate window to jot down your comments and suggestions... this is ongoing for me so any help would be appreciated!
Read the full article at Install Multiple Os without cds
This is my first post and I plan on making this topic an official HOWTO with www.tldp.org.
I have been into the computer security scene since 1990, but I realized that I had very little experience with the various LInux, Unix, and alternative Operating systems out there.
I have a CD-RW drive but being a struggling computer security researcher I had no money for blank cd-recordables. What follows is how I managed to install various operating systems on my computer (1 hard drive) without having to burn to a CD the ISO and then boot from that.
I first partitioned my 120GB harddrive into 10 partitions, the 2nd partition is a small swap and the last partition is extra large because it holds all the ISO images..
I then wrote a small shell script to automatically download (I love wget!) the following.
OpenBSD
IpCOP
Libranet
Arch-Linux
Fire
Local Area Security
Packet Master
Devil-Linux
FreeBSD
Knoppix
Helix
Gentoo
Yoper-Linux
NetBSD
RedHat
Slackware
The script also downloaded Installation manuals and md5 checksums.. (let me know if I should post... its pretty unsophisticated
I installed Slackware (personal favorite) on hda1 using my last blank CD-R, note that I do not have a separate boot partitino. (Should I?). I also installed grub on the MBR. I love grub, if you read through the man pages and all info you can find about grub, you can learn a whole lot. Grub has much more features and capability than lilo, even though lilo comes installed by default with slack.
I organize my kernel situation as follows... In my /boot directory, I mkdir KERNEL, CONFIG, MAP, INITRD and that is a good way for me to keep my kernels and everything organized.. Another good way is a separate dir for each new kernel.
Since Arch-Linux is a solid distro, I'll use that as a first example.
Here is the Arch-Linux section of my shell script
goge Arch-Linux
$w http://puzzle.dl.sourceforge.net/sourceforge/archlinux/arch-0.6.iso
$w http://unc.dl.sourceforge.net/sourceforge/archlinux/arch-0.6.md5sum
$w http://www.archlinux.org/docs/en/guide/install/arch-install-guide.html
md55
cat arch-0.6.md5sum
md5sum arch-0.6.iso
md55
The first thing to do is to mount the downloaded ISO image so we can use it as if it were an actual CD.
mount -t iso9660 -o ro,loop=/dev/loop0 cdimage /mnt/cdrom
Where cdimage= the ISO image. EX. /usr/local/src/ISO/Linux/Arch-Linux/arch-0.6.iso
This mounts the iso as /mnt/cdrom.
Next you need to copy /mnt/cdrom to a separate partition for the booting process. So mkfs.ext2 /dev/hda9. ( I prefer reiserfs or even XFS to ext but if you use something other than ext2 you could run into some problems because some of the installation kernels and initrds don't include support for reiserfs and so can't recognize the files. Although you could use mkinitrd to create a new initrd with reiserfs support, that might be pushin it IMO... I use the 9th partition consistently for this. I know there is a "right" way to copy the /mnt/cdrom files so everything stays the way it is supposed too, using tar or cpio, but I'm lazy so I just do cp -rp.
(What is the tar or cpio commands to copy with correct permissions etc??)
So you mount the 9th partition as whatever, say /mnt/hd and then copy the files. Now what?
Now edit your /boot/grub/menu.lst file to include the specific options to boot arch-linux installation.
A good idea is to find the isolinux.cfg file somewhere on the distro cd, this will tell you what to include in the menu.lst.
Here is the section in my menu.lst
title Arch Install
root (hd0,8)
kernel /isolinux/vmlinuz load_ramdisk=1 prompt_ramdisk=0 root=/dev/rd/0
initrd=/isolinux/initrd.img
This should be self-explanatory. The root (hd0,8) is pointing to partition 9. So the rest of the commands start from partition 9.
When you experience problems, remember you can always edit the grub boot options by typing 'e' and then edit the section. Also, a good idea is to include several variations in your menu.lst so you can easily try other ways to boot efficiently. And, remember to read up on all the installation guides that come with your distro, specifically, hard-disk installs.
There are special cases, Gentoo, has a semi-new compressed filesystem called squashfs. BTW, this is AWESOME, so check it out. It has to be compiled into the kernel, so some work is in order, but use this recompile to optimize your kernel. You can get the squashfs patch for almost any kernel. I use the latest stable 2.6 kernel. Squashfs is incredible and although I don't think you need it to install from ISO, you do need it to expand the livecd.squashfs filesystem that comes with the cd.
Heres a sample Gentoo section from my menu.lst
title Gentoo Install
root (hd0,8)
kernel /isolinux/gentoo root=/dev/ram0
initrd=/isolinux/gentoo.igz init=/linuxrc acpi=off looptype=squashfs loop=/livecd.squashfs cdroot vga=791 splash=silent
A nother' tip is the shell that is provided if you experience problems, typically busybox or ash. The key tools to get you going from here is mount and chroot. Sometimes you will need to manually create a simulated file system and then chroot into it. For instance, you might have to create boot, etc, bin, directories on the target partition.
I generally install each OS onto the next partition (careful of the logical partition) and add it to my menu.lst after install. A good idea is after installation, copy the kernel and initrd(if there is one) to the slackware(or whatever) boot partition on hda1. I copy kernels to /boot/KERNEL/ and initrd's to /boot/INITRD, then menu.lst is more organized...
You then need to add an updated section to your menu.lst (just comment out the install section for later)
Here is the finished arch-linux section from menu.lst
title Arch Linux 6
root (hd0,2)
kernel /boot/vmlinuz26 ro root=/dev/hdc3
This doesn't use my convenient boot/KERNEL/vmlinuz26 as you can tell by setting the root to partition 3.
***NOTE: Make a backup of MBR using dd and save to floppy, also backup the partition table to floppy, using cfdisk or parted. And boot disks (I use 1 with grub, and 1 with slack, and tomsbootdisk) will invariably come in handy. Tomsbootdisk is recommended, and make the grub boot disk when you install grub. install to floppy.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The final result after some fun experimenting, is when I boot, I have a cool grub boot screen come up with the option to boot into whatever OS I want, this is handy for multiple reasons. One good thing to do after this is to port scan and vuln scan each OS, after you update of course. Write this stuff down and you will know the weaknesses/strengths of the various OS's.
I can boot a custom Firewall, snort, or multiple honeypots using this procedure, as well as a graphical kde environment with a kernel optimized for graphics and my processor/architecture, or an environment devoted to forensics or even an environment suitable for programming.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
P.S. Some of the cooler alternative operating systems are BeOS 5, EOS, ER_OS, V2_OS, and my personal favorite Menuet. Menuet is 100% assembly graphical operating system that fits on a floppy. Its f'in money!
This should be a good enough example to get you started, this kind of thing should be learned and not just copied... Knowing how to do this stuff could prove to be exceptionally useful...Start by reading all the articles built-in on your Mac - Help > Mac Help, search "printer sharing."
http://desk.stinkpot.org:8080/tricks/index.php/2008/04/how-to-print-to-a-cups-se rver-from-mac-os-x/
http://www.macosxhints.com/article.php?story=20080324224027152&query=share%2Bpri nter
http://members.cox.net/18james/osxprintersharing.html
http://ubuntuforums.org/archive/index.php/t-56940.html -
BOOT DEVICE NOT FOUND - PLEASE INSTALL AN OPERATING SYSTEM ON YOUR HARD DRIVE
HP G6-2212SA LAPTOP ( 2 YEARS OLD) BLACK - WINDOWS 8
I HAVE RUN THE MEMORY TEST PASSED
RUN THE HARD DISK QUICK CHECK - PASSED
RUN HARD DISK EXTENSIVE TEST - PASSED
I HAVE BOUGHT A NEW HARD DRIVE, INSTALLED IT AND RUN ALL THE SAME TESTS WITH ALL THE SAME PASSED RESULTS. I BELIEVE THAT THE PROBLEM IS NOT THE HARD DRIVE, SO I HAVE TAKEN THE NEW ONE OUT AND PUT THE OLD ONE BACK IN, AND HOPEFULLY BE ABLE TO GET A REFUND IF I SEND IT BACK.
I HAVE FOLL0WED INSTRUCTIONS ON THIS FORUM TRIED MOST THINGS STILL GET THE SAME MESSAGE.
I HAVE BOUGHT A WINDOWS 8 RECOVERY DISK OFF EBAY, TRIED IT SEVERAL TIMES AND DIFFERENT WAYS BUT WILL NOT LOAD UP
PLEASE HELP AND ADVISE AS IM IN A DELEMA
DARRENHi @Darren104
Welcome to the HP Support Community. I saw your post regarding the Boot Device not Found error message. This HP document Resolve Boot Device not Found Error Message will show you how to reset your BIOS. This will force the BIOS the look at the hardware and it might see your new hard drive. Another reason that it might not be seeing the hard drive is because there is no bootable operating system on the hard drive. You might need to look at taking it out and installing an operating system on it via another computer.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
How many partitions and operating systems can you line up in BootCamp?
A quick question, hopefully with a quick answer.
How many partitions and operating systems can you line up in BootCamp?
Are we limited to just 2, or can we have more?
Say, for example, Mac, Win XP, Win Vista and Linux maybe?
Thanks in advance.VPC does not run on Intel Macs. If you wish to use virtualization on an Intel Mac see this:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not yet fully developed for the Mac - some features are not yet implemented - but it does work otherwise.
6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it.
You can upgrade XP to Vista without having to make any changes to the Boot Camp partition. Vista can either perform an upgrade install or erase the Windows volume before installing Vista. You don't need to do anything to change the partition via Boot Camp. However, if you need to enlarge the partition, then the only way that can be done is to first use Boot Camp to remove the partition. Then use Boot Camp to make a new, larger partition. All data from the Windows partition will be lost.
Maybe you are looking for
-
Why aren't adapter errors visible in SXMB_MONI?
My client has an integration scenario that updates an Oracle database through a JDBC receiver channel. Occasionally an insert/update statement will fail. The adapter engine logs the Oracle error message, but that error message doesnt show up in SX
-
Unable to open ITunes stores using my IPAD & download videos
Hi, I purchased IPAD in Hong Kong apple stores and i reside in India. I have changed my location to India and also provided account information and credit card details of India. When i try to open ITUNES stores from my IPAD it says " CANNOT CONNECT T
-
Why won't Lightroom 5 export as a small (e.g. 100k) jpeg file?
When I try to export my edited raw file to a jpeg for web use, I need to use a small size file. Lightroom 5 doesn't seem to let me do this below 1000k. Does anyone know how to do this? Many thanks
-
Does any one know how to format the ipod classic 80 gb?
I am having a problem with my old ipod. trying to recover it from a crash. Message says I have a corrupted files.
-
Dropdown and data provider. I want to add an item to my dropdown
Hi, here my problem. I've a downdrop. It is binded to a data provider. It works fine, all the db rows are displayed. Now I want to add an item to my downdrop, programmatically. This because, I need to put a new selection named "ALL" into the dropdown