How to install an unsigned driver in bootcamp Windows 8.1?

I need to install an unsigned driver on my Windows 8.1 bootcamp partition, but it disables that by default. If I edit the boot options in the advanced options, then my mouse and keyboard (Ive tried many types) will not connect or work at all. Any ideas?

Hi Willimo,
The main issue is to install the graphic driver software ,right ?
There are two ways to get the driver, automatically update from the windows update or manually download the driver from the manufacturer website and install it from the device manager.
Please refer to the following link :
Download and install drivers
http://windows.microsoft.com/en-hk/windows-8/all-drivers
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • How to install in diffrent drive

    Hi,
    How to install at diffent drive?

    Heir72 which Adobe software or service is your inquiry in relation too?

  • How to install a flash drive?

    How to install a flash drive?

    If you simply mean a USB flash drive, or a USB hard drive. There should be no installation requirements. If the drive doesn't show up in Finder, you should check whether Disk Utility sees it, and whether the drive has a Mac readable filesystem. Disk Utility can be found with spotight if you do not know where it is.

  • How to install HP printer driver *****

    Hi,
    How to install HP printer driver , so that i can see new device type in SPAD.
    Thanks
    Lisa

    Hi Lisa,
    proceed as below.
    1)Log in to HP-UX as root (or an other username that controls the printers, and has all the rights to the directories).
    2)Type sam  on the command line and press enter.
    3)Scroll to Printer and Plotters with the vertical scrollbar.
    4)Click twice on Printers and Plotters.
    5)Double click on LP Spooler.
    6)Click twice on Printers and Plotters.
    7)Select Actions on the menu bar and click on Add Remote Printer/Plotter.
    8)For “Printer Name” type any name, “Remote System Name” use the DNS/Host name, or alternatively use the dotted-IP (200.200.200.11). ”Remote Printer Name” should be one of the destination ports on the Printnet (d1prn, d2prn, etc….). Also select Remote Printer is on a BSD System. Press OK and the server will install the printer.
    9)Click on OK.
    10)For a test print type lp –d Printername /etc/protocols.
    And finally  don’t forget to make this printer as the default printer if u have only this.
    Right click on the printer and and say make default.
    Regards,
    Bapu

  • How to install The Soundblaster Audigy SE in Windows 7 RC?

    :How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
    But how to install in Windows 7 RC ?
    I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
    Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
    When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
    What to do ? A computer without sound is nothing...
    Thanks,
    Arie

    >Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
    I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
    The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

  • Cannot access mac fusion drive in bootcamp windows 7

    My Fusion drive  imac cannot access the Mac fusion drive in bootcamp windows 7. even  I installed the bootcamp 4.1on windows 7.  It is trouble as I cannot get my file in the mac drive in windows.
    I don't have this problem in my old imac 2008.

    See iMac (27-inch, Late 2012): Boot Camp alert with 3TB hard drive

  • How to install and use icloud in imac windows 7 based

    How to install and use icloud in imac windows 7 based

    Have you carefully read iCloud - Learn how to set up iCloud & iCloud on a Mac?, What do I need? If you are trying to run on Windows 7 on your iMac and ignoring OS X well you're pretty much on your own. You would need to look for supports on Windows forums. If you happen to use BootCamp there is a Bootcamp forum that you can post on for BootCamp and Windows assistance.

  • Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

    Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

    Of note there is a new AMD Catalyst Omega driver released earlier in the week that brings 5K resolution to AMD graphics cards. Here is the link (support.ad.com/en-us/download) to the AMD site. But none of these work with my iMac (Retina 5K, 27-inch, Late 2014), Windows 8 bootcamp.
    Please advise.
    Thanks in advace.

  • How to install Oracle Developer Suite 8 on windows 8 64bit

    Hi, everyone.
    I have facing problem. How to install Oracle Developer Suite 10g on windows 8. Please send me step by step install.
    Thanks
    Mbulur.

    No version of Forms/Reports is currently supported on Windows 8. Also, because Error Correction support for versions older than 11 have ended, no new certifications will be provided for those versions. I would recommend you consider upgrading to Forms/Reports 11.1.2.1 as we are hoping for Win8 certifications in the future for this version.

  • How to install the SAPRouter service on a Windows 2003 Server?

    Hi, can someone please either provide me with the instructions or point me to a URL or a SAP note that describes how to install the SAPRouter service on a Windows 2003 32-bit server?
    This is fairly urgent so your assistance here would be much appreciated.
    Many thanks
    Sharon

    I tried this and I get the following error...
    'ntscmgr' is not recognized as an internal or external command, operable program or batch file.
    Any further suggestions?
    S

  • How to install adobe acrobat XI pro in windows?

    how to install adobe acrobat XI pro in windows?

    Hi Adhanie
    May be Yes .... Try to get the offline activation Code from Adobe and Use it ...
    Please refer : https://exception.licenses.adobe.com/aoes/aoes/v1/t1?locale=en
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • How to install 2 oracle homes on singl windows host

    Hi Experts,
    I am planning to install two sap R/3 4.7 ext200 SR1 instances on windows 2003. I already installed DEV instance & planning for QAS.
    I am confused about how to install two ORACLE softwares on single windows host.
    I search on internet there for windows they are pointing to the registry value
    \HKEY_LOCAL_MACHINE
    Software\Oracle\inst_loc.
    I am not able to understand what I have to do with this ?
    Can you please help me to understand & execute this.
    Thanks,
    Sachin

    Sachin,
    Go throuth this link to understand more about Oracle Inventory and Oracle Homes software update.
    http://cs.ifmo.ru/~ad/Documentation/oracle-10g-lib-doc/em.101/b12140/3_oui_oracle_homes.htm#i1005634
    The current entry is picked from the PATH vairable of the system and user that you have logged on. This is because you have already done 1 Oracle Installation on the host.
    Keep in mind that you choose the correct oracle home while installing and in future updating Oracle software (patchset, Interim Pactches...)
    You can give a seperate path for Oracle Inventory. Just go thru to the existing folder of OraInventory in Program files you will understand it better.
    It is used to install and update the Oracle software in the oracle home that you will choose in your next step.
    All the Best,
    Nilesh

  • Currently i am using a windows7 installed machine with following configurations intel core i5 2.60Ghz with Ram 8gb.(64 byte).I would like to install Mountain lion osx in my windows machine.Pls tell how to  install  mountain lion osx in my windows machine?

    Currently i am using a windows7 installed machine with following configurations intel core i5 2.60Ghz with Ram 8gb.(64 byte).I would like to install Mountain lion osx in my windows machine.Pls tell how to  install  mountain lion osx in my windows machine?

    Please stop asking about that on this forum.
    There are plenty of informations on the Internet if you want to do it but nobody here will help, because is against the forum's rules.
    And, you can't buy Mountain Lion if you do not have a Macintosh with at least Snow Leopard installed.
    There is no physical media. Mountain Lion is provided by Apple through the Mac App Store.

  • HT5016 how to install QuickTime 7.7.1 at window xp computer?

    how to install QuickTime 7.7.1 at window xp computer?

    Sources I have is:
    - jdk-6u21-windows-x64.exe
    - ogs-3.1.2.2-windows.exe.
    - I created folder in c: call "java".
    - setup jdk-6u21-windows-x64.exe in (C:\java).
    - You may need to set JAVA_HOME in Environment variables with new java home (e.g C:\Java\jdk1.6.0_21) and you can add this in the Path variables:
    C:\Java\jdk1.6.0_21;C:\Java\jdk1.6.0_21/bin;C:\Java\jdk1.6.0_21\jre;C:\Java\jdk1.6.0_21\jre\bin
    - Double click on ogs-3.1.2.2-windows.exe and start setup glassfish server (I choosed Custom Installation --> Install and Configure).
    - After installation you may need to set java path in C:\glassfish3\glassfish\config\asenv.bat
    by adding this line set AS_JAVA=C:\java\jdk1.6.0_21
    and add in C:\glassfish3\glassfish\config\asenv.conf  this line:
    AS_JAVA="C:\java\jdk1.6.0_21"

  • How to install W7 Promise driver for K9A2 Platinum

    First of all i assume no responsability for any loss of data ,everything described here is done on your own risk.BACK-UP data before doing this.
    Any K9A2 Platinum v1 user was disapointed when looking on the product page seeing no W7 driver.As a MSI tech recommended a driver from Promise i said to myself to try it and of course , it did not installed the normal way.You could force it tru HAve Disk from within Windows 7 only when running form the SB 600 .Also Windows updates installs an update for the cip.
    The procedure is simple ,practically you only need to edit one or 2 INF files depending on the W7 version.
    FTTX4650-2650 controllers are both compatible with Windows 7 as the Microsoft website shows.
    Download driver from Promise website the driver for FTTX4650-2650 Win7 Win2008R2 WHQL V 1.3.0.4 -> file name FTTX4650-2650_Win7_Win2008R2_WHQL_V_1.3.0.4
    Unzip the archive and navigate to the i386 or/and amd64 folders locate <FTT3s.inf> file/s ,open with Notepad.For the .inf extension to be visible go to File & Folder Options and enable extensions to be visible.
    Under the [Promise] section add the folowing lines ,this ID s were harvested from within Windows 7 Promise properties ,when no driver was installed
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
    After the copy/paste that [Promise] section will look like this
    [Promise]
    %SATA_TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F29105A
    %SATA_TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2A105A
    %SATA_TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2B105A
    %FastTrak TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F21105A
    %FastTrak TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F22105A
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3716105A
    %FastTrak TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F24105A
    %FastTrak T2_Desc%=Napa_Inst,PCI\VEN_105A&DEV_377d&SUBSYS_3772105A
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
    %Promise_Raid_ControllerDesc%=NODRV,SCSI\ProcessorPromise_
    If it looks like this save the file.
    Go and Install it.
    A warning message for the driver will appear as with any beta or unsigned driver ,ignore it.
    When in W7 update the Promise as offered by Windows update.
    I will not be held resposable for any damage or data loss.You are doing this on your own risk.Back-up your data and test the driver for yourselves before long term usage.
    If it works for you post feedback.

    Quote from: wlahdone on 21-February-11, 21:51:07
    First of all i assume no responsability for any loss of data ,everything described here is done on your own risk.BACK-UP data before doing this.
    Any K9A2 Platinum v1 user was disapointed when looking on the product page seeing no W7 driver.As a MSI tech recommended a driver from Promise i said to myself to try it and of course , it did not installed the normal way.You could force it tru HAve Disk from within Windows 7 only when running form the SB 600 .Also Windows updates installs an update for the cip.
    The procedure is simple ,practically you only need to edit one or 2 INF files depending on the W7 version.
    FTTX4650-2650 controllers are both compatible with Windows 7 as the Microsoft website shows.
    Download driver from Promise website the driver for FTTX4650-2650 Win7 Win2008R2 WHQL V 1.3.0.4 -> file name FTTX4650-2650_Win7_Win2008R2_WHQL_V_1.3.0.4
    Unzip the archive and navigate to the i386 or/and amd64 folders locate <FTT3s.inf> file/s ,open with Notepad.For the .inf extension to be visible go to File & Folder Options and enable extensions to be visible.
    Under the [Promise] section add the folowing lines ,this ID s were harvested from within Windows 7 Promise properties ,when no driver was installed
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
    After the copy/paste that [Promise] section will look like this
    [Promise]
    %SATA_TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F29105A
    %SATA_TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2A105A
    %SATA_TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2B105A
    %FastTrak TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F21105A
    %FastTrak TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F22105A
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3716105A
    %FastTrak TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F24105A
    %FastTrak T2_Desc%=Napa_Inst,PCI\VEN_105A&DEV_377d&SUBSYS_3772105A
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
    %Promise_Raid_ControllerDesc%=NODRV,SCSI\ProcessorPromise_
    If it looks like this save the file.
    Go and Install it.
    A warning message for the driver will appear as with any beta or unsigned driver ,ignore it.
    When in W7 update the Promise as offered by Windows update.
    I will not be held resposable for any damage or data loss.You are doing this on your own risk.Back-up your data and test the driver for yourselves before long term usage.
    If it works for you post feedback.
    I made the changes specified above. How do I install the driver ?

Maybe you are looking for

  • Possible bug with HTML emails and attachments from Mail.app

    I'm trying to send an attachment with an HTML email from Mail.app and getting unexpected results. I've been messing around with the order that things get added to the new e-mail and it seems that I can have either an attachment or I can have HTML ema

  • Movies no longer offered by apple tv?

    So I made a wishlist of all the movies I want to watch. I go to rent one and it says that it is no longer offered on Apple TV. It happened to about 3 of them. I thought that maybe the studio dropped their movies or deal with Apple. I checked, and all

  • I have ipod gen 2 8gb. WHere do I find apps that will work?

    Gen2 8gb ipod touch.  Is there a way to search for apps that will work on that?  I know it is older.  Most of the apps I find will no longer work  on  under iOs 3.0.  Looking specifically for apps for calorie counter & book on tape. thx

  • How can I transfer my photoshop elements information (catalog, etc.) from Windows to Mac

    I have been using photoshop elements for year. I'm currently using version 11 on Windows 7. I'm considering switching to a Mac and getting version 12 there. But before I do that, I want to make sure that there is a way to convert or transfer the cata

  • 2006 WLC and 802.11N

    I have a 2006 WLC with 6 1242 APs and was wondering what should I expect when I replace 1242 with an 802.11n AP. i know that the new AP will not run at full speed but other than that, I don't know. Any thoughts on this? Thanks, Gary