HOW TO Install and Make PJC in Jdeveloper 12c

Hello experts, I am new in Jdeveloper.I am using Oracle weblogic server10.3.5 with oracle forms and reports 11g at windows 7.My weblogic is configured to oracle forms and it work good. Now I want to install Jdeveloper 12c to make PJC components for my oracle forms. Please tell me the Tips to install jdeveloper 12c at my system so that I could use my oracle forms and reports as well as Jdeveloper.For this should I install jdeveloper with seperate weblogic server. Please tell me that How can I make PJC for my oracle forms. Thank You regards aaditya.

Hi,
you should use the JDeveloper version matching the WLS version of your Forms installation. E.g. WLS 10.3.6 --> JDeveloper 11.1.1.6. JDeveloper 12c is set up with JDK 7 by default and JDeveloper 11g with JDK 6. So creating PJC in 12c has a the risk of minor major version mismatches when running the PJC in Forms as your Java Plugin for sure wont be of JRE 7
Frank

Similar Messages

How to install and make work efront LMS system on a mac mini server

I need everyones help.
I like to install and make to work efront learning management system. Do anyone knowsthe steps i have to do? The only i did and was unsuccesfuly is to download unzip and put the folder in the libraries-webserver-documents and try from the browser putting the address http://mydomain.com/efront/www/install/install.php
Brings me to the installation page press continue and then says to me to fix some php settings. After that i do not know what to do. If any knows please help..

If it has more than one OS installed you use either System Preferences>Startup Disk, or hold the Option/alt key at bootup to select which one.

How do Install and make FFmpeg work with Video DownloadHelper?

I use FireFox v.29 in Windows XP; I installed Video DownloadHelper. I want to convert the videos as soon as I download them. In the preferences of the extension there's a box that says "enable conversion". As I check that box I'm asked to install an external application to do that. I press the button that says "install/update converter". This opens a page of the official site of Video Download helper. It says I need to install FFmpeg to convert the videos. I go to ffmpeg.org to download it, the download page tells me I must dowload it from http://ffmpeg.zeranoe.com/builds/. So I donwload the 32-bit static build and I extract its files from the compressed folder.
That's as far as I go. There's no installation file inside; there are three executable files inside: ffmpeg,exe, ffplay.exe, and ffprobe.exe. I've opened all three of them and entered the Video DownloadHelper preferences after that. The problem is that when I try once again to check the box for "enable conversion" I'm once again told that I have to install the external application. What am I doing wrong?
In the official site of Video DownloadHelper there are a step by step explanation but for another converter: ConvertHelper, so they aren't really helpful.
Can you please help me?

Hi,
The add on support site is located on their add on homepage [http://www.downloadhelper.net/documentation.php Download Helper add on support site]. It did not require me to download an external .exe file?

How to Install and Configure Workflow For PO in Oracle Apps Version R12

Hi,
Please do let me know how to install and configure Workflow for Purchasing in Oracle Apps R12 Version.
I want to the standard setup of workflow configuration for the PO.
Thanks and Regards
Srini

Hi Suresh
Only the latest version of WLP which is WLP 10.3.2 has facility to integrate with Oracle UCM with Adapaters. So make sure that you do have this latest version of WLP 10.3.2. Older versions like WLP 10.3 do not have this provision.
Also I guess when you install and configure this Oracle UCM Adapater and choose above WLP Home, I guess these modules may be added in already installed WLP folders. I checked on my side for WLP 10.3.2 and I could NOT find the modules you mentioned. So most probably you may be missing some installation/configuration stuff from UCM side.
Thanks
Ravi Jegga

How to install and work with oracle webcenter 11g

Hi
Will please guide how to install and work on oracle webcenter11g, i am fresher in oracle that's why. so please guide me
Regards
Rajesh P

In order to create and develop a webcenter portal application, you only need to install JDeveloper and download the WeBCenter extensions. That's true.
But this install does not include the WebCenter services like dicussions, document services, analytics,... If you want to use these and integrate them in your portal, then you would need to install the suite as described on my blog.

How to install and verify the license file on ASA 5512-x

Hi Friends,
How to install and verify the license file on ASA 5512-x Firewall. I have lincese pak for CX and web security essential.
What need to be done? can i install this lic file on firewall or need to be install on CX server. Because i dont have the CX server right now.
Please share me document for installation of this license.
thx
Ashish Kumar

Hi,
one possible solution is to use an intermediate array. The intermediate array should be used in the user interface. When new data is entered the VI should read each element and then compare to the elements in the stored array. If all elements are different then update the array, otherwise display a fault message.
You could use asequence activated when the Enter button is pressed. In the first frame you would compare the First array with the stored array. it is probably best to use a Boolean indicator to show if the data is valid Make sure you declare this as a local variable.
With the sequence you can perform the comparisons in several seperate frames or in one frame with a OR to link the results. For large numbers of comparisons I prefer to use m
ultiple frames because otherwise the screen becomes a maze of wires and other programmers who may need to maintain the code in the future will find it hard to follow a single frame.
Once all the data items have been compared then the following sequence should contain a CASE statement of type True/False. Link a readable copy of your local variable to the selector of this statement. Then in the FALSE case (Assuming you have linked the boolean to be false when no data is duplicated) copy the new array to the stored array. In the TRUE case bring up an error message.
So long as your arrays are not too large and you do not use this technique in too many places in your code the processor overhead should not be badly affected. For frequent use of such a caomparison in several VIs you may want to create a dedicated subVI for the task. For very large arrays you should seek a different solution.
Hope that helps a bit.
Good luck,
Shaf

How To Install and run XML/XSU/XDK?

Hello,
I have installed Oracle 8.1.7, have downloaded the utilities
and xdk but how to get all this integrated so I can work with
the sample codes?
I dont see the $ORACLE_HOME/rdbms/admin/dbmsxsu.sql -- this is
the SQL script which builds the XSU's PL/SQL API. xsu12.jar
need to be loaded into the database before dbmsxsu.sql is
executed. This script is automatically ..Nor do I see catxsu.sql.
I assume this creates the xdkdemo/xdkdemo (user/password)? I
also re-run the runInstaller and attempt to see on the list any
XSU related installed or to be installed and not seeing it on the
list. What do I need to download?
A nice step by step how to install and test the install would
be nice.
Thanks in advance for any response.

I entered "install XSU" into the "search" box and got the
following back:
http://www.oracle.com/pls/use/use_query_html_v3.submit_query_inpu
t?p_adv_query_text=install+XSU&p_origin=OTN&p_person_id=100081&p_
community=technet_adv&p_doc_location_array=Place+Holder&p_doc_loc
ation_array=document&p_location_array=&p_keyword_array=100017&p_v
alue_array=technet.oracle.com%2C+Discussion+Groups&p_date_begin=q
date&pdate_end=q_date&p_max_return=200
(GOD I hope that worked!)
In any case, 2 documents came back. I think this one is probably
what you want.
http://download-east.oracle.com/otndoc/oracle9i/901_doc/appdev.90
1/a88894/appgxsu.htm
Mike

How to install and reconfigure a new hard drive?

How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can give

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

How to install and use a plug-in downloaded from the apple site?

how to install and use a plug-in downloaded from the apple site?

Emelie,
which plug-in do you want to install?
some of the plug-ins come with an installer on the disk image, you click the installer and it will install it in its proper location.
For others you move the plug-in into to System Library or your User Library:
Your Hard disk > Library > Application Support >Aperture > Plug-Ins > Edit
or
Your Home Folder > Library > Application Support >Aperture > Plug-Ins > Edit
If it is an "Edit" plug-in, it goes into the "Edit" subfolder, "Export" plug-ins into the "Export" subfolder.
You can tell by the extension, what kind of plug-in it is.
E.G. BorderFX.ApertureExport is an export plug-in, BorderFXEditPlugin.ApertureEdit an edit plug-in.
Regards
Léonie
P.S. In OS Lion the Libraries are hidden by default: To reveal your User Library activate the Finder and select from the main Finder menu:
    Finder > Go , then hold down the ⌥-option-key, untill the Library appears in the drop.down menu.
To show the System Library:
     Finder > Go > Go to Folder
then enter   / Library

How to edit and make a high quality swf a low quality one

How to edit and make a high quality swf a low quality one. how do you do this in adobe flash cs5? The file i edited is entirely too large

click file/publish settings/html and use the quality settings dropdown.
if that doesn't lead to satisfactory file size, you may need to check the properties of each bitmap in the library to see if it's set to over-ride the global settings.

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

I have downloaded Firefox 5.0 at least three times and saved file, but I don't know how to install and run. It keeps asking me to download new version and Save file. I'm in a never ending loop, it keeps downloading same exe & does not install Please Help

Please tell me how to install and run new Firefox 5.00 after I have downloaded the new version and chosen Save File. I just go into Loop and screen says new version available and download again !

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Here is the short answer:
Installing Snow Leopard Server into Parallels 10 for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

How to install and run NWBC.

Hi,
1). I want to install and run NWBC on my system. Please let me know how to install and use NWBC.
2). I want to know that i have to install NWBC on every end user system or I can install this on server itself .
3). Is there any license issue for NWBC.
Thanks & regards,
Adarsh

Adarsh
Before you start, it would be best to check for systems prerequisites (especially the backend Business Suite that you want to run against). Then you need to decide whether you want to run NWBC Desktop (i.e. Windows based) vs HTML (i.e. Browser based). The OSS Note # 900000 (NWBC FAQ) below should help to set you in the right direction.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
License wise, NWBC licensing is the same as SAPGUI ... It's free as long as you have the standard SAP maintenance license.
HTH

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

HOW TO Install and Make PJC in Jdeveloper 12c

Similar Messages

Maybe you are looking for