How to install and uninstall XL reporter

Dear Expert,
I want each step of XL-Reporter how to install,uninstall and other key tips while installing and uninstall.
Thanks

Hai
See this link, u need s-user id to log in
https://websmp109.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001172792006E
Regards,
Thanga Raj.K

Similar Messages

How can I download itunes when I get the following errors...have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up..ituneshelper did not install correctly error 7

How can I download itunes when I get the following errors ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
Any help greatly appreciated.
billymac

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

How to install and reconfigure a new hard drive?

How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can give

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Error on iTunes library file after installing and uninstalling 8.1

I downloaded 8.1 after being prompted. After installing 8.1, I could not synch my IPod. I uninstalled 8.1, reinstalled 8.02, and now I am getting this error.
Does anyone have any ideas on how to correct this? I have about 39 Gigs of music, and will have problems trying to restore this to a hard drive.

I'm not sure if this is the right place to ask this; i'm new; after i installed the latest version of itunes, i get a library error message each time i open it up; it tells me i have an invalid library, then it creates a backup and calls it 'damaged1'; i have installed and uninstalled itunes 3 times now; each time, i erase all traces of past libraries, so that i start 'new'; the first time i open up itunes, i don't get the error message; i do absolutely nothing with the program, just close it; wait 5 seconds; open it up, and immediately i get the error message, and it creates a 'damaged1' back up; each time i open it, it creates a newer backup, and keeps adding 'movie, genius, dj' etc to my playlist; if i open it 10 times, i've got 10 of all these folders - HELP ME!

After downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring.

after downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring. I do not know how to fix this problem so I always return to the old version.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

How to install and configure nwportal7.3

HI
Can any one guide me how to install and configure nwportal, main objective of the configuration is i want to install ess and mss components,
for this what components i have to install in portal. can any one guide how to find the nwportal installation guide
regards
vredddy

I reported this to the moderators since clearly you didn't spend 5 minutes trying to search for the guides yourself. However, for some reason the moderators didn't agree with my report. Anyway, what operating system and database would the portal be running on? See the this link for a list of installation guides. When installing portal select at least AS, EP, EPC, BASIC and NW-MODEL usage types. After portal has been installed, you can start installing and configuring ESS and MSS. The next steps depend on your ERP release. Which is what? Include EHP level whether MSS Add-On or HR Renewal is installed (assuming pre EHP7). You might have to deploy business packages on your portal and you might have to activate business functions in your ERP system. Since there are so many variables, you won't find one guide that gives all the instructions. You will have to read the application help and blogs/documents/discussion threads on SCN for instructions.

Having major problem cannot use my arrow to open anything on page only about 2 in down from browser will it work I have installed and uninstalled firefox

arrow does not open anything 2 in. below the toolbar works fine below that I've installed and uninstalled Firefox several times will not work using Firefox11 very hard to access a lot of things especially when ordering online cannot submit any info required

If the inoperable button or link is near the top of the page....
Recently, the Yahoo Toolbar and the Babylon extension have been reported to cause that problem. They seem to overlap invisibly over the top of the web page display. If you have either or both, uninstall or disable them/it, or see if an update is available that solves the problem.
*Uninstall Yahoo Toolbar --> http://help.yahoo.com/l/us/yahoo/toolbar/toolbar8/general/general-07.html
*Uninstall Babylon --> http://support.babylon.com/index.php?/Knowledgebase/Article/View/177/0/uninstall-babylon-software
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
If that does not solve the problem:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

How To Install and run XML/XSU/XDK?

Hello,
I have installed Oracle 8.1.7, have downloaded the utilities
and xdk but how to get all this integrated so I can work with
the sample codes?
I dont see the $ORACLE_HOME/rdbms/admin/dbmsxsu.sql -- this is
the SQL script which builds the XSU's PL/SQL API. xsu12.jar
need to be loaded into the database before dbmsxsu.sql is
executed. This script is automatically ..Nor do I see catxsu.sql.
I assume this creates the xdkdemo/xdkdemo (user/password)? I
also re-run the runInstaller and attempt to see on the list any
XSU related installed or to be installed and not seeing it on the
list. What do I need to download?
A nice step by step how to install and test the install would
be nice.
Thanks in advance for any response.

I entered "install XSU" into the "search" box and got the
following back:
http://www.oracle.com/pls/use/use_query_html_v3.submit_query_inpu
t?p_adv_query_text=install+XSU&p_origin=OTN&p_person_id=100081&p_
community=technet_adv&p_doc_location_array=Place+Holder&p_doc_loc
ation_array=document&p_location_array=&p_keyword_array=100017&p_v
alue_array=technet.oracle.com%2C+Discussion+Groups&p_date_begin=q
date&pdate_end=q_date&p_max_return=200
(GOD I hope that worked!)
In any case, 2 documents came back. I think this one is probably
what you want.
http://download-east.oracle.com/otndoc/oracle9i/901_doc/appdev.90
1/a88894/appgxsu.htm
Mike

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

I have recently tried to access my itunes account but am unable to. I installed and uninstalled the new download several times. I know I have a balance from itunes cards on my account as I received an email recently. I have an ipod shuffle

I have tried to access the itunes store by many different means. I know I have account balance as I put in 2 gift cards back in March and have not used them all. I recently installed and uninstalled itunes several times but I still cannot open it on my computer. When plugging in my ipod shuffle it does not automatically load either although my computer says it's working correctly.

Click on the "Start" button. Click "Run." Type the word "cmd" in the open box. When the DOS screen comes up, type "netsh winsock reset." Press "Enter." Type "exit" to close the DOS window and go back to Windows.
Restart the computer.
Read more: http://www.ehow.com/how_2125133_do-winsock-reset.html#ixzz2kyccghec

Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

Hi Doug Talbott,
Please refer to the page associated with this link (Configuration error 16 | CC, CS) and follow the procedure detailed for Windows 7 and let me know if your issue gets resolved.
Regards,
Rahul Tyagi

How to install and use a plug-in downloaded from the apple site?

how to install and use a plug-in downloaded from the apple site?

Emelie,
which plug-in do you want to install?
some of the plug-ins come with an installer on the disk image, you click the installer and it will install it in its proper location.
For others you move the plug-in into to System Library or your User Library:
Your Hard disk > Library > Application Support >Aperture > Plug-Ins > Edit
or
Your Home Folder > Library > Application Support >Aperture > Plug-Ins > Edit
If it is an "Edit" plug-in, it goes into the "Edit" subfolder, "Export" plug-ins into the "Export" subfolder.
You can tell by the extension, what kind of plug-in it is.
E.G. BorderFX.ApertureExport is an export plug-in, BorderFXEditPlugin.ApertureEdit an edit plug-in.
Regards
Léonie
P.S. In OS Lion the Libraries are hidden by default: To reveal your User Library activate the Finder and select from the main Finder menu:
    Finder > Go , then hold down the ⌥-option-key, untill the Library appears in the drop.down menu.
To show the System Library:
     Finder > Go > Go to Folder
then enter   / Library

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

I have downloaded Firefox 5.0 at least three times and saved file, but I don't know how to install and run. It keeps asking me to download new version and Save file. I'm in a never ending loop, it keeps downloading same exe & does not install Please Help

Please tell me how to install and run new Firefox 5.00 after I have downloaded the new version and chosen Save File. I just go into Loop and screen says new version available and download again !

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Here is the short answer:
Installing Snow Leopard Server into Parallels 10 for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

How to install and uninstall XL reporter

Similar Messages

Maybe you are looking for