How to install and update ARD from 3.3 to present

I have a dillema as I have just come across my ARD 3.3 disc and serial number that I purchased a while back and did not get around to installing it. Iv'e just put the disc into my mac and tried to install, but it says the version I am trying to install is for Snow Leopard, as I am in Lion. I tried to download the latest update from ARD and install it but it said it cannot find ARD, which makes perfect sense. So how can I get around this problem?
Thanks in advance

Hi
There is an Apple Support article explaining the steps you need to do this which I can't seem to find at the moment. Eseentially this is what you do:
1. Copy the Apple Remote Desktop Installer from the Installation disc to the desktop
2. Hold the Control key and click on the Installer icon
3. In the contextual menu that appears, choose Show Package Contents
4. In the package contents, navigate to Contents/Installers
5. Control-click on RemoteDesktopAdmin.pkg and choose Show Package Contents
6. In the package contents, double-click the Archive.pax.gz file to expand it
7. In the expanded archive, navigate to Archive/Applications/ and drag Remote Desktop to your Applications folder
8. Immediately run Software Update to update Remote Desktop to the latest version
Alternatively you could download the latest version of ARD Admin instead and have the package ready to install after completing step 7.
HTH?
Tony

Similar Messages

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it?

Googled for an instruction sheet. Got the following.
https://helpx.adobe.com/photoshop-elements/getting-started/install-pse.html
and
https;//helpx.adobe.com/photoshop-elements/kb/photoshop-elements-installation-errors.html
(Don't know why the second one didn't turn into a link, that's the url that printed out at the bottom of the page)
In any case it doesn't matter. I returned it to the store where I bought it.
Rule #1; Don't use a product if the people who produce that product (software, hardware, etc.) don't properly support it.
User forums and\or chat lines, are useful and may help. But! They do not constitute proper support (not for installation purposes anyway).

How to install and use a plug-in downloaded from the apple site?

how to install and use a plug-in downloaded from the apple site?

Emelie,
which plug-in do you want to install?
some of the plug-ins come with an installer on the disk image, you click the installer and it will install it in its proper location.
For others you move the plug-in into to System Library or your User Library:
Your Hard disk > Library > Application Support >Aperture > Plug-Ins > Edit
or
Your Home Folder > Library > Application Support >Aperture > Plug-Ins > Edit
If it is an "Edit" plug-in, it goes into the "Edit" subfolder, "Export" plug-ins into the "Export" subfolder.
You can tell by the extension, what kind of plug-in it is.
E.G. BorderFX.ApertureExport is an export plug-in, BorderFXEditPlugin.ApertureEdit an edit plug-in.
Regards
Léonie
P.S. In OS Lion the Libraries are hidden by default: To reveal your User Library activate the Finder and select from the main Finder menu:
    Finder > Go , then hold down the ⌥-option-key, untill the Library appears in the drop.down menu.
To show the System Library:
     Finder > Go > Go to Folder
then enter   / Library

Been visiting another country. when i got home i get an unknown error has occurred on both my iphone and ipad2 when trying to install or update anything from app store

been visiting another country. when i got home i get an unknown error has occurred on both my iphone and ipad2 when trying to install or update anything from app store

I started getting that message on my iPad tonight when I reset it completely. I haven't been t another country. So not sure if that has anything to do with it. I haven't been able to resolve yet.

HT1338 how do I to update plugin from 4.0.1.0 to 4.0.3.0?

How do I to update plugin from 4.0.1.0 to 4.0.3.0? -
As I need to down load maps onto my Garmin and the 4.0.1.0.that I installed have won't work.

There is no legit way to do this.
You can Google for illegitimate ways at your risk.
Have you tried a reset or restore?

How to read and update the value of property file

Hi,
I am not able read the values from property file.
Please tell me how to read and update the values from property file using Properties class
This is my property file : - Config.properties its located in D:\newfolder
Values
SMTP = localhost
Now i need to change the value of the SMTP
New value :
SMTP =10.60.1.9
Pls Help me
Thanks
Merlin Rosina,

Post a small (<1 page) example program that forum members can copy and run that demonstrates your problem.

How to install and reconfigure a new hard drive?

How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can give

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840)

Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840) but instead only a Intel HD 4600. How do I ensure that PS is using the full phardware power of my notebook. My OS is WIN 8.1 Thanks for your help, Meik

In the end it was the NVIDIA software - excluding PS as application for support by high performance graphic processor to save energy - activated NVIDIA card use for PS & LR all fine now.

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

Formication : How to install and use it

Hi,
I need some help. I would like to install and use the Formication CGI but I don't find any documentation usable for someone who never installed any CGI
Does someone use it and can teach me how to install and use it ? Or maybe there is a documentation somewhere ?
Thanks for any help

>I thought it was something well known here.
I'd never heard of it before.
Find here the message from the Mac OS X Server Mailing list where I found it.
Hi all..
We are currently moving: from WebStar / Lasso 6.x / FMS 5.5 to
Mac OSX Server / Apache / Lasso.850 / FMSA 8.
On our WebStar webserver we used FlexMail to handle e-mails sent from a
html-form, unless we wanted databases/Lasso to get involved.
I understand FlexMail cannot be used on Apache so I have been looking around
and searched the list for any tool to do the same job.
--> What tool to send e-mails directly from web-forms
with a reasonable option to format the e-mail and
generate a response page.
Henning, most of the people that transition from WebSTAR to iTools Apache use Formication.
Formication is a Perl version of Flexmail, so it has all the features of Flexmail, plus more. It was designed by one of the developers of the original Flexmail.
When you convert from WebSTAR to Apache you can keep your script intact.
With iTools, all you need to do is to add the action:
Flexmail /cgi-bin/formication.pl
and the .flx handler,
and the scripts run unchanged.
>I also found that there is an invisible file
inside. It's a .htaccess file
I'd totally missed that, and it's likely to be the
critical link.
yes... I supposed it was something important but.... well hidden...
By default, as shipped by Apple, .htaccess files are
ignored. You need to explicity enable then in
/etc/httpd/httpd.conf
Both 'Action' and 'AddHandler' (the two directives in
the .htaccess file) require FileInfo override for the
directory. Therefore, at the very least you need to
add:
<pre class=command><Directory /path/to/your/form>
AllowOverride FileInfo
Directory></pre>
to your httpd.conf so that apache will read the
.htacess file.
Alternatively, since you have to edit httpd.conf
anyway, you might just want to add those directives
to the <Directory> block, which will save Apache
having to read the file each time the form is used.
Thanks a lot Camelot,

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

I think that stuff is for windows, a waste of time trying to use it on a Mac.
There is no need to download anything for Khmer on a Mac. Apple provides Khmer fonts and keuyboards with OS X.
OS X Mountain Lion: Type in another language
MS Word for Mac does not support Khmer. Use TextEdit, Pages, Nisus Writer, LibreOffice instead

How to install and consume GroupWise Web Service (SOAP)

Hello! I'm Razvan, programmer from Romnia, and I am new to GroupWise development.
I am asking if anyone could help me with a C# Visual Studio 2010 example of how to install and consume GroupWise Web Service (SOAP).
The documentation from novell site didn't help me, i didn't understant much of it.
All I need is either a link to a documented GroupWise C# developer step-by-step tutorial, or some code examples.
Can you please show me some code examples in C# with:
1)loging in using a username and a password,
2)retrieving contact list,
3)retrieving appointment list,
4)sending a mail,
5)setting an appointment
I don't know how to use "groupwise.wsdl" and customise it so that it points to our GroupWise server.
Please, I really need this because I am working at a project right now which involves GroupWise integration.
I hope I haven't disturbed anyone with my simple question.
I know this might be a very simple question given the complexity of the other posts here, but that's why I really hope I will get an answer soon.
Thank you very much!
Signature:
How old is the Orthodox faith?
How old is the orthodox faith?

Just a comment.
The value for the version element should be "1.02"
not "1.2".
Preston
>>> On Tuesday, March 01, 2011 at 8:06 AM,
TheRomanian<[email protected]> wrote:
> I have great news! After strong documentation yesterday and today, I've
> just made a successfull example that actually connects to our GroupWise
> server.
>
> I made it in PHP.
>
> I need an ASP.NET + C# application, but now is very simple to convert
> it. I post the PHP code here for other people who in future might be
> interested in finding out.
>
> So a simple PHP GroupWise Login code using "groupwise.wsdl" web
> service:
>
>
> require_once('./GWService/GroupwiseService.php');
> require_once('FB.class.php');
>
> $classmap = array(
> 'Authenication' => 'Authenication',
> 'PlainText' => 'PlainText',
> 'loginRequest' => 'loginRequest',
> 'loginResponse' => 'loginResponse',
> 'logoutRequest' => 'logoutRequest',
> 'logoutResponse' => 'logoutResponse',
> 'UserInfo' => 'UserInfo',
> );
>
> $gwservice = new GroupwiseService(
> "./WSDL/groupwise.wsdl",
> array(
> "location" => "http://11.150.40.78:8756/soap",
> *Your GroupWise server IP:
> and PORT*
> "classmap" => $classmap,
> "trace" => true)
> );
>
> // do login
> $pt = new PlainText();
> $pt‑>username = *"YOUR GROUPWISE USERNAME"*;
> $pt‑>password = *"YOUR GROUPWISE PASSWORD"*;
>
> $lr = new loginRequest();
> $lr‑>auth = $pt;
> $lr‑>language = "en";
> $lr‑>version = "1.2";
> $lr‑>application = "phpClient";
>
> $lres = $gwservice‑>loginRequest($lr);
> //print_r($lres);
>
>
> I Hope this will help others.
>
> ‑‑
> Signature:
>
> How old is the Orthodox Faith?
> 'How old is the orthodox faith?'
> (http://www.orthodoxphotos.com/history.shtml)

Creating a external content type for Read and Update data from two tables in sqlserver using sharepoint designer

Hi
how to create a external content type for Read and Update data from two tables in sqlserver using sharepoint designer 2010
i created a bcs service using centraladministration site
i have two tables in sqlserver
1)Employee
-empno
-firstname
-lastname
2)EmpDepartment
-empno
-deptno
-location
i want to just create a list to display employee details from two tables
empid firstname deptno location
and same time update in two tables
adil

When I try to create an external content type based on a view (AdventureWorks2012.vSalesPerson) - I can display the data in an external list. When I attempt to edit it, I get an error:
External List fails when attached to a SQL view
Sorry, something went wrong
Failed to update a list item for this external list based on the Entity (External Content Type) 'SalesForce' in EntityNamespace 'http://xxxxxxxx'. Details: The query against the database caused an error.
I can edit the view in SQL Manager, so it seems strange that it fails.
Any advice would be greatly GREATLY appreciated.
Thanks,
Randy

How to install and start the adapter(FILE)

hi,
when i checked in RWB for the adapters which are INSTALLED and STARTED adapters it's displaying all adapters except FILE adapter .
I need to known whether this adpater is installed or installed and started ,if the case then how to install and start the adapter

Hi Nandan,
if above is the case as i mentioned in previous response then,
You need to download the latest SAP BASIS 6.40 or 7.0 ".tpz file" (as per you service pack) from service.sap.com. Then you need to put this in the import directory:
<b>\usr\sap\<your system-id>\SYS\global\xi\repository_server\import\importedFiles</b>
Now go to
<b>IR>Tools>Import design Objects, you will find the .tpz file which you down loaded. Import this and refresh your cache.</b>
P.S This is the exact path in market placehttps://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
Regards,
Sarvesh

Adobe Illustrator appears as "installed and updated" on Creative Cloud but I cannot find the Application on my Computer (Windows)

Creative Cloud is installed and working on my computer, nevertheless the Application "Adobe Illustrator" appears as "Installed and Updated" but it is physically NOT in my computer.
I cannot find the Application in my computer, I installed Photoshop and other Apps, they are all to find in my PC, except Illustrator.
I tried to uninstall Creative Cloud and all the Apps that I had, I re-installed creative cloud but still it showed "Adobe Illustrator" as "installed and updated", even if I have no Adobe illustrator folder on my Computer, it really does not exist in my computer.
What is wrong with the Application?

Klerica please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to reinstall Adobe Illustrator.

How to install and update ARD from 3.3 to present

Similar Messages

Maybe you are looking for