How to Install AS 10g version 10.1.2.3 on Windows server 2008 64bit

Dear
Exparts, Hope you are fine.
Application Server: Standalone 10.1.2.3
OS: Windows Server 2008 64bit
Hardware: Intel Xeion ProcessorI know Oracle Application Server 10g & Standalone my version is 10.1.2.3 is not competible with Windows Server 2008 64bit.
But i need to install. Have any one has successfull experiances to do so ?
Please share and guide.
Waiting for your valuable responses.
ask2learn

Dear Marcus,
Thanks for your reply.
I tried Application Server Stand Alone and success.
So, i closed the thread.

Similar Messages

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

Install CF8.01 on Windows Server 2008 64bits

Hello,
I have a new machine whith Windows server 2008 x64 and i
installed on it CF8.01.
For installing, no problems and the service work fine.
But, when i launch one page on the web server, a .cfm or a
classic html the IIS 7 return a error 500.21 :
HTTP Error 500.21 - Internal Server Error
Handler "AboMapperCustom-26364" has a bad module
"IsapiModule" in its module list Detailed Error InformationModule
IIS Web Core
Notification ExecuteRequestHandler
Handler AboMapperCustom-26364
Error Code 0x8007000d
Requested URL
http://127.0.0.1:80/
Physical Path C:\inetpub\wwwroot
Logon Method Anonymous
Logon User Anonymous
In IIS config panel, handlers mapping, i have entry for all
CF handler and one with path * and direct from
jrun_iis6_wildcard.dll.
the section of web config for handlers is :
<handlers accessPolicy="Read, Script,Execute">
<clear />
<add name="AboMapperCustom-23790" path="*" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\1\jrun_iis6_wildcard.dll"
requireAccess="None" responseBufferLimit="0" />
<add name="AboMapperCustom-23791" path="*.jsp" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23792" path="*.jws" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23793" path="*.cfm" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23794" path="*.cfml" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23795" path="*.cfc" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23796" path="*.cfr" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23797" path="*.cfswf" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="TRACEVerbHandler" path="*" verb="TRACE"
modules="ProtocolSupportModule" requireAccess="None" />
<add name="OPTIONSVerbHandler" path="*" verb="OPTIONS"
modules="ProtocolSupportModule" requireAccess="None" />
<add name="StaticFile" path="*" verb="*"
modules="StaticFileModule,DefaultDocumentModule"
resourceType="Either" requireAccess="Read" />
</handlers>
and
Application 32bits mode is ok
<applicationPoolDefaults enable32BitAppOnWin64="true">
<processModel identityType="NetworkService" />
</applicationPoolDefaults>
Have you an idea why the application server fail.
Thanks for your responses.
Seb

I'm pretty sure Adobe offers free installation support, try
contacting them:
http://www.adobe.com/support/contact/
Ken Ford
Adobe Community Expert - Dreamweaver/ColdFusion
Fordwebs, LLC
http://www.fordwebs.com
"sebFrance" <[email protected]> wrote in
message news:g1el1t$e2l$[email protected]..
> Hello and thank you again,
> I configured Application Pools in 32bitsenabled.
>
> I had always error 500.21
>
> Then I uninstalled CF8 and reinstalled with 32bits
enabled in the application
> pools.
> I've always the same mistake.
>
> It is also important to know that when I webserver
config to remove the server
> I get an error:
>
> "Error deleting IIS application extensions. Jsp,. Jsw,.
Cfm,. Cfml,. Cfc,.
> Cf.,. Cfswf,. Mxml, from web site Any (0)"
>
> In addition, handlers configured in the web site
"AboMapperCustom-26764" with
> the isapi module for the "*" is the one that fails.
>
> East I forgot something:
>
> I recall the installation process complete server:
>
> Installing Windows Server 2008 64bits.
> ----
> Installing the Web server role with IIS7 :
> ----
> Common HHTP Features (All options)
> Health and diagnostics -> request monitor
> Security -> Request Filtering
> Performance -> Static content compression
> Managements tools (IIS Management Console + IIS6
Compatibility)
> ----
> Installing SQL server 2005 64bits
> ----
> Passage of the authorized application pools in 32-bit
applications
> ----
> Installing CF8 version 8.01 standard 32bits
> ----
> Modifying files as indicated ksmith.
> ----
> For each phase I restart the machine so that changes are
properly taken into
> account.
>
> Despite all this I have always error 500.21
>
> East I forgot some things, a service or a component that
I should download.
>
> But thank you for your valuable advice.
>
> S?bastien
>
>
>

Which version of Windows Server 2012 needs to be ordered so that I can downgrade to Windows Server 2008 64bit Standard SP2

Dears in Microsoft,
We need to have Windows Server 2008 Standard SP2 64bit to be installed and due to the fact it is no more available in Microsoft.
I am going to order Windows 2012 with 16 CAL in order to downgrade it to Windows 2008 Standard SP2 64bit. My question is:
1. Which version of Windows Server 2012 needs to be ordered so that I can downgrade to Windows Server 2008 64bit Standard SP2?
2. what else required in terms of product key, media, license...etc?
Appreciate your kind supports.
thanks and best regards
Barznj Abdullah

Any licensing questions are always best addressed by a trained Microsoft licensing specialist. You can find whom to call by looking at www.microsoft.com/licensing.
One of the built-in rights of a Windows Server license is the right to run earlier versions of the operating system. So if you purchase either Standard or Datacenter, you can run 2008 Standard.
However, that does not provide the media or activation codes for earlier versions of the operating sytem. You have to obtain those via other channels. You should most likely contact a Microsoft reseller and talk to them. They will
most likely have a trained licensing specialist on hand to help answer your questions, and they should also be able to provide media for earlier distributions (for a slight fee).
.:|:.:|:. tim

Installing Forms 11g 64bit on Windows Server 2008 64bit

Hi,
we are trying to install Forms 11g 64 bit with WebLogic 64bit on windows Server 2008 64bit and followed the short checklist of Jan Carlin :
- installed JDK 64bit
- installed WLS1032-generic
- started installation of Forms/Reports
Installation of Software worked fine and the configuration part did create the domain, but starting the domain fails (hang).
Info in Log-File :
=========================================================
oracle.as.provisioning.util.ConfigException:
Fehler beim Starten der Domain.
Cause:
Zeitüberschreitung beim Starten von Admin_Server.
Action:
Weitere Informationen finden Sie in den Logs.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3142)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1647)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
[2010-02-22T19:37:39.730+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IRqToJA5uXW5Pzw0yd1BWefv00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
================================================
Somewhere I've read that the reason might be that the installation uses 32bit JDK, but I don't know if I did something wrong.
Somewhere else I've read that the reason could be the Path setting, which may include some directories with emphasis in the name which might be a problem for Weblogic.
Any idea or help is appreciated.
Thanks,
Mark

FYI,
This is related to Oracle-Bug 9370799 which hopefulls get sorted out sometimes. Having "(" or ")" somewhere in the PATH is not working. The workaround til the Bug is solved as of support is :
=================================
1) Remove the directory with "(" ")" from the System Path at install time only (this is what you have already performed)
2) Roll back the change so the System Path contains again the directory path with parenthesis
3) Copy in the clipboard the current PATH value and edit the <Middleware Home>\wlserver_10.3\common\bin\commEnv.cmd file and look for the following line:
if "%WL_USE_X86DLL%" == "true" set PATH=%PATCH_PATH%;%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%ANT_HOME%\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%PATH%;%WL_HOME%\server\native\win\32\oci920_8
4) Before this line define PATH to value you have in the clipboard without the reference to the directory with "(" and ")"
5) Save the commEnv.cmd and you should be able to start up your domain having the directory containing the "(" and ")" in the System Path
==================================
Thanks for your replies,
Mark

About Install Oracle Access Manager On Windows Server 2008 64bit

hi,
Question 1:
Can I install OAM10g(10.1.4.3.0) on Windows Server 2008 64bit ?
(because OAM10g all is for win32)
(I have tried to install it , but when OHS restart, have errors, so I found the 64bitOS is the trouble...)
Question 2:
If Question1 cannot, Can Oracle Identity and Access Management 11g fix it ?
Help
Thanks.

Does this server use Itanium processors ? See MOS Doc 430677.1 (The image file setup.exe is valid, but is for a machine type other than the current machine.)
Srini

How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

Hi Every Body,
1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
-- I have download all files from e-delivery and check the md5 and all files are OK.
I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
2- Was that a problem ?
-- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
thanks in advance.

Hi,
Most of the instructions you have mentioned , already was configured.
except for the tmp and temp directories.
And even I changed them from System Properties >> Advanced >> Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
I attach the conf_VIS.txt file because I thought it may help.
http://www.4shared.com/document/1bS6aio5/conf_VIS.html
Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

Oracle Database 10g(10.2.0.1.0) for Windows server 2008 SP1

Hi,
I would like to install Oracle database 10g on Windows server 2008 SP1. What is the supported version ?
As I go through certification matrix on Oracle support, 10.2.0.5.0 is supported on Windows Server 2008, however I can I install it directly.
Any help in this regard is highly appreciated.
Thanks

TheExplorer wrote:
Thanks srini for your reply.
Currently, we are running a lower version of database i.e 10.2.0.1.0 on windows server 2003. I need to migrate theses servers into virtual environment running Windows server 2008 64 bit.
The document you referred applies to MS Windows 32 bit. However, I see that Oracle Database and Oracle Database Client 10g Release 2 (10.2.0.5) for Windows x64 are supported on Windows Server 2008 R2 x64.http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#CHDFHIEA
From where, can we download the older versions of Oracle database as it is not available on OTN (The version of Oracle Database you are looking for is no longer available on OTN. Please visit any of the following links for current release information).
Looking ahead for the right direction
Thanks
You have to open a service request at My Oracle Support.

CF10 on Windows server 2008 (64bit): 32-bit CF cannot be installed, but 64-bit can.

Hi, I have exhaused my research and ways of fixing this issue.
I have a Windows Server 2008 (64-bit).
I am able to install 64-bit CF10 on it and CF websites run just fine.
On the same machine, I have a ASP website that must be in run in 32-bit and within this website there are some ColdFusion pages. So I have to install CF10 32 bit. So I uninstalled CF10 64bit.
When installing CF10 32 bit, I always got error message:
Cannot configure IIS connector. Enable the required option ASP.NET, ISAPI Extensions and ISAPI Filter in IIS under Windows Features and try again.
I did lot of online research and found RELATED posts, but none of them worked for me. Basically, in my case I have the IIS following installed
ISAPI Extensions
ISAPI Filter
ASP.NET
CGI
but I alway got the above error message. Cannot think of other reasons.
Any help is really appreciated!!! I have been working on this thing for the past three working days.
Regards.

Hi,
I saw your post which is similar to the problem I'm trying to solve. I'm not sure if I need to post a new topic, but I thought just add it to your post.
I installed CF10-64bit on Windows 2008 server (64 bit). When I opened the CF admin, it gave me an error - HTTP Error 500.0 - Internal Server Error. The page cannot be displayed because an internal server error has occurred. Module: IsapiModule, Handler: cfmHandler, Error Code: 0x800700c1. After searching for solution in the internet, I finally made it work after changing the DefaultAppPool which is used by the CFIDE in the advance settings, the "Enable 32-bit Applications" to False.
Now, my problem is I have an ASP application which requires that the application pool advance settings must be set to True for "Enable 32-bit Applications". I created another application pool for this application. It woks fine. However, this ASP application calls some CF pages and I'm having a problem because the CF10 is set to use a different application pool with diferent setting for "Enable 32-bit Applications".
In order for my application to work, it seems that I need to install the CF10 32 bit version. Am I right? Or is there a work around for my issue?
Thanks in advance for any help.
I'm going to create a new post for this.
Message was edited by: tibay

Is there a restriction to install ODBO driver on Windows Server 2008 64bits

For SAP BusinessObjects Business Planning and Consolidation (BPC) version 7.5 Microsoft it is possible to connect with Xcelsius using an ODBO provider installed on the BPC server. In the installation Guide for BPC it is specified the need to add following key to the registry:
http://HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Business Objects\Suite 12.0\MDA\ODBO
"SupportedProviders"="BPCMDX.4"
When installing on a Windows Enterprise Server 2003 64 bits I can find the registry three path to http://HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Business Objects\Suite 12.0\MDA\ODBO . On a Windows Enterprise Server 2008 64 bits I cannot see the key path.
I copy below the paragraph regarding ODBO driver from BPC 7.5 Installation Guide:
Prerequisites
The following software is installed:
n SAP BusinessObjects Enterprise XI 3.1 SP02 (see Downloading and Installing the Central Management System
page 15).
n Microsoft Visual C+ 2005 Service Pack 1 Redistributable Package ATL Security Update+
on the Planning and Consolidation Web server and SAP BusinessObjects Enterprise
XI 3.1 SP02 server for Voyager or a Universe. You can download the installer from
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID
=766a6af7-ec73-40ff-b072-9112bab119c2 and choose vcredist_x86.exe.
Procedure
1. Download the Planning and Consolidation ODBO provider from the SAP Download area by
selecting Downloads Installations & Upgrades on the SAP Service Marketplace.
2. Navigate to <drive>:\odbo and run the client.exe file.
3. Add the Planning and Consolidation ODBO provider to the Data Driver by entering this registry
setting:
http://HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\MDA\ODBO
"SupportedProviders"="BPCMDX.4"

I found the answer, Xcelsius 2008 SP3 is not supported on Windows Server 2008.
Before trying to use more products please check the supported platforms for all products. For example you can see in Xcelsius documentation that SAP Business Objects Xcelsius 2008 SP3 is not supported on Windows Server 2008. This means that, even if BPC 7.5M supports Windows Server 2008, it is not possible to use both BPC 7.5M and Xcelsius 2008 SP3 on a Windows Server 2008.

How do you repair ntoskrnl.exe error or system error in windows server 2008 and 2012

hi,
can you repair system file errors like ntoskrnl.exe in windows server 2008 and 2012 like like before in windows server 2003 ?
the steps were repairing ntoskrnl.exe error in windows server 2003
1- have a 2003 cd and from that cd start recovery console and copy from i386 directory ntldr and ntdetect.com to windows /system32 directory on the server and then repairing
2- MBR with fixmbr command and then rebuild BOT.INI file with bootcfg/rebuild .
now my question is how you repair or solve such problem with ntoskrnl.exe error in windows server 2008 and windows server 2012
thanks
johan
h.david

first this wil take a lot of time for windows 2008 and 2012 ,
and what about windows 2003 I thing this has no startup repair
thanks
johan
h.david
What will take a lot of time? Repair or clean install? These days one can standup a new VM and have an operating system on it in around 20 minutes or so.
Correct server 2003 is file based deployment and completely different OS from repair perspective as well.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Install windows server 2008 64bit on a poweredge sc430 using usb flash drive

Good day Sir!
I Have 2 poweredge sc430 server with windows server 2003 64bit OS... I want to upgrade it to windows server 2008 standard edition R2 64bit.. I first disable the internal cdrom from bios and installed win2k8 64bit on 1 sc430 using external dvdrom. But when i used a usb flash drive to install win2k8 to another sc430, the server and keyboard hangs. ive already configured the boot sequence(usb drive as 1st priority). ive tried my usb flash to a non dell pc to make sure if my usb boots well and it worked... i think that there must be something i missed in configuring the bios of sc430
Thanks in advance!

donpham
Is it possible that I could have a copy of WS 2008 64-bit from you?
Thanks!
That's not how it works.

ERROR Installing SAP NetWeaver PI 7.1 EHP 1 on Windows Server 2008 R2 x64

Hi!
I'm trying to install SAP NWPI 7.1 on a Windows Server 2008 R2 Standard, but in the step "Create Java User" stop the process when this creating the SAPJSF user, here's my system specifications:
OS: Windows Server 2008 R2 x64 Standard
RAM: 2 GB
Free Space: 100 GB
Virtual Memory: 16384 MB
Environment Variables:
CPIC_MAX_CONV = 200
JAVA_HOME = JDK 1.5 64 Bits
On running phase: Create Java Users, the installation stops when try to create the SAPJSF user, here's the output log:
ERROR 2010-06-16 12:18:28.968 [sixxcstepexecute.cpp:984]
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
INFO 2010-06-16 12:17:57.968
Output of C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message is written to the logfile C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/ADA/STD/AS/UserCheck.log.
WARNING 2010-06-16 12:18:28.593
Execution of the command "C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message"; finished with return code 8. Output:
INFO 2010-06-16 12:18:28.609
Removed file C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ADA\STD\AS\dev_UserCheck.
ERROR 2010-06-16 12:18:28.640
CJS-30197 . DIAGNOSIS: For more details see output of log file:
ERROR 2010-06-16 12:18:28.968
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
WARNING 2010-06-16 12:18:29.125
Could not get property IDs of the JavaScript object.
ERROR 2010-06-16 12:18:29.125
FJS-00010 Could not get value for property
Best Regards,
David

Hi All,
As per the latest available sapinst and the kernel DVS's the system does not come up in the Java stack/Dual stack. Fails at the stage Starting the Java stack/SAPJSF creation stage. This is due to the kernel issue as the latest kernel is not bundled as a part of the DVD.
You are opt for 2 options
1. Stop the installation and the Bring down the system via MMC/cmd. backup the kernel and upgrade the Kernel with the latest Kernel available in the market place and then start the SAPINST. This would go ahead fine and the system would come up.
This is valid for the Dual stack and Java only system. In As ABAP the system get installed but the system would give dumps as soon as we log in so the Kernel upgrade needs to be done to proceed with the rest of the post steps.
2. Follow the snote: Note 1480785 - Creating a Modified Windows Kernel DVD for not getting bothered with these errors while installations.
Hope this helps -- Further more SAP would be coming out with the new DVD's/Support for Windows 2008 R2 pretty soon.
Thanks,
Lijin Xavier

Installing Oracle 10.2.0 on Windows Server 2008 64bit

Dear all(s)
Recently i am running production database 10.2.0 on windows server 2003 32 bit. there is some memory limits and i cannot set SGA,PGA > 2 GB.
I want to mode production database 10.2.0 on windows server 2003 64 bit, please guide me in following topics:
1. What steps i have to take for moving database from 32bit to 64bit
2. After moving database on Microsoft windows server 2003 64bit, i can set SGA,PGA more than 4 to 6 GB
3. How much SGA,PGA i can configure
4. Dataguard also configured on another server for production database.
5. I have to again setup dataguard on 64bit.
6. What others seniors which i have to meet.
Waiting for response
Naeem Sheeraz
Faisababad, Pakistan

Naeem,
+1. What steps i have to take for moving database from 32bit to 64bit+
You can make use of conventional export/import, investigate using data pump, transportable tablespaces, and RMAN backup/restore. Simplest will busing e conventional export/import
+2. After moving database on Microsoft windows server 2003 64bit, i can set SGA,PGA more than 4 to 6 GB+
I think you can go beyond 6gb may be upto 20gb (if system can hold that much :))
+3. How much SGA,PGA i can configure+
Depending upon your requirement, what kind of work you are doing database, large queries, lots of DML activities, transactions., how many users simultaneously (at the same time) will access your database?
+4. Dataguard also configured on another server for production database.+
+5. I have to again setup dataguard on 64bit.+
YOu should follow the same setup as your primary setup for same kind of services and performance
6. What others seniors which i have to meet.
I didn't understand what do you mean? Do you mean requriement?
Regards

How to download oracle patch set 10.2.0.5 for Windows server 2008 R2

I need download and install oracle patch set 10.2.0.5 and install for Windows server 2008 R2 (notes 1486772).
But I get message "Download basket request for update has been processed. Unable to add 1 new object(s). The objects are already part of Export and to be processed."
Help me, please!

Hi,
Have you looked at this location https://service.sap.com/oracle-download ?
Refer SAP Note 871735 - Current patch set for Oracle 10.2.0 -> Oracle patch set 10.2.0.5
Once you add the Patchset 10.2.0.5 in download basket, you will find the same in Export tab of Download Basket. You will have to get the approval from SAP Export department by raising OSS message with XX-SER-SWFL-EXPORT component. After getting approval for the same from SAP Export dept., then & then only you will able to download it.
Regards,
Bhavik G. Shroff

How to Install AS 10g version 10.1.2.3 on Windows server 2008 64bit

Similar Messages

Maybe you are looking for